Hi,
In my HTC One i've recentely obtained root permissions with this tool.
Then i've installed the Xposed Framework and the Modaco ToolKit.
No problem still now.
Later I've installed the Advanced Power Menu with Reboot Options v4
Can't boot the phone. (See attachment for a screen)
Any ideas?
i had same problem.
1-) Install clockworkmod with on-the-go support
2-) if you have on the go cable( if you dont have it then you cannot use this method), download a rom and copy to a usb flash disk.
3-) plug it to your phone with usb flash disk attached.
4-) boot into recovery
5-) select install zip from sd card, then select install from external sd card ( you have to wait about 30 seconds to phone identify your usb stick)
6-) flash your rom and enjoy!
it worked for me on ARHD 4.2...
fethi2 said:
i had same problem.
1-) Install clockworkmod with on-the-go support
2-) if you have on the go cable( if you dont have it then you cannot use this method), download a rom and copy to a usb flash disk.
3-) plug it to your phone with usb flash disk attached.
4-) boot into recovery
5-) select install zip from sd card, then select install from external sd card ( you have to wait about 30 seconds to phone identify your usb stick)
6-) flash your rom and enjoy!
it worked for me on ARHD 4.2...
Click to expand...
Click to collapse
I've CWM Touch installed on the phone, how can i go to it?
do you know it has on-the go support?
---------- Post added at 03:20 PM ---------- Previous post was at 03:19 PM ----------
http://forum.xda-developers.com/showthread.php?t=2173863
if you flashed from this thread yes it has.
fethi2 said:
do you know it has on-the go support?
---------- Post added at 03:20 PM ---------- Previous post was at 03:19 PM ----------
http://forum.xda-developers.com/showthread.php?t=2173863
if you flashed from this thread yes it has.
Click to expand...
Click to collapse
No,
ok accessed to bootloader/recovery, there is a way to restore the stock rom?
yes of course you can find the stock rom, but you wiil lose root and may lose your recovery
so you have to do it from scratch... i recommend flashing a custom rom.
rampo said:
Hi,
In my HTC One i've recentely obtained root permissions with this tool.
Then i've installed the Xposed Framework and the Modaco ToolKit.
No problem still now.
Later I've installed the Advanced Power Menu with Reboot Options v4
Can't boot the phone. (See attachment for a screen)
Any ideas?
Click to expand...
Click to collapse
This mod (APM) is for deodexed roms. It does not work with standard rom (odexed) even if it's rooted...As i understand!
Cheers
ouioui01 said:
This mod (APM) is for deodexed roms. It does not work with standard rom (odexed) even if it's rooted...As i understand!
Cheers
Click to expand...
Click to collapse
yes, i was on stock rom rooted. requires de-odexed rom
fethi2 said:
yes of course you can find the stock rom, but you wiil lose root and may lose your recovery
so you have to do it from scratch... i recommend flashing a custom rom.
Click to expand...
Click to collapse
Thanks, but where i can found the stock rom ?
there is a thread for this...
http://forum.xda-developers.com/showthread.php?t=2224752
Thanks, it worked
happy to see it worked...
enjoy ))
Related
I was using MIUI NX A2SD version 1.8.5
Wanted to try the New version MIUI NX 1.9.x
So i Formated the SD using the "MiniTool Partition Wizard Home Edition" as 1gb EXT3 and Rest as FAT
Now i wen i reboot my mobile it doesnt BOOT IN.
It doesnt even boot into the recovery in theOOTLOADER .
Please help.
I DONT THINK I HAVE THE CLOCKWORK or AMON installed ... wat to do ?
If you have unlocked bootloader - just install the recovery through fastboot and reinstall any ROM you want.
If you don't have unlocked bootloader - you can either unlock it, or try to restore your Nexus using PASSIMG method and then root it without unlocking. If PASSIMG won't work - then you'll have to unlock the bootloader.
All the relevant guides are in the Wiki. Link in my signature.
I will try the PASSIMG method ...
I have flashed my mobile many times with many OS till now BLINDLY.
I always had either CLOCKWORK or AMON recovery installed. But after ther recent MIUI install i didnt install any RECOVERY.
So i am not able to get the RECOVERY options.
Recovery isn't connected to ROM in any way, and if you had the recovery installed before installing the ROM - you still have it. Boot to bootloader, choose "Recovery", press power button to select.
Download FRG83 ROM from here. FRG33 ROM from here can also be used, but might result in "Main version is older" error.
Rename the downloaded ZIP file to PASSIMG.ZIP.
Transfer the provided PASSIMG.ZIP file to the root of your SD card.
Power down your phone.
Hold down the Volume Down button as you power your phone back on.
A screen should appear showing your phone’s system searching for various files. This will take up to 2 minutes.
The phone will ask you if you want to start the update. Press the Volume Up button to start the update.
If you followed these steps correctly - congratulations, you are now on stock Froyo ROM.
Click to expand...
Click to collapse
But
The phone will ask you if you want to start the update. Press the Volume Up button to start the update.
Click to expand...
Click to collapse
Its not asking me.
wen its searching for the files it says NO IMAGE
---------- Post added at 05:22 PM ---------- Previous post was at 05:09 PM ----------
Used this link to unlock the bootloader:
http://android.modaco.com/topic/299078-how-to-unlock-the-bootloader-on-your-nexus-one/
---------- Post added at 05:25 PM ---------- Previous post was at 05:22 PM ----------
Jack_R1 said:
Recovery isn't connected to ROM in any way, and if you had the recovery installed before installing the ROM - you still have it. Boot to bootloader, choose "Recovery", press power button to select.
Click to expand...
Click to collapse
When i click RECOVERY it does nothing.
ANy ways thank you very much for directing me UNLOCKING THE BOOTLOADER.
I followed the above posted link and NOW i can boot in. Thank you very much
---------- Post added at 05:38 PM ---------- Previous post was at 05:25 PM ----------
As soon as I unlocked the Bootloader i was able to boot the mobile.
It is all new MIUI OS. all the data is gone.
Now i put a new MIUI rom ZIP file on SD and try to enter the RECOVERY menu but i cant.
Wat do i need to do to access the Recovery options ?
firoz3321 said:
But
Its not asking me.
wen its searching for the files it says NO IMAGE
Click to expand...
Click to collapse
Make sure that there isn't a zip contained within a zip.
Anyway, the easiest way to get recovery back on your phone if you are back up and running with MIUI would be to install ROM Manager from the market and using it to flash your recovery.
Ok now the problm seems to be with SD card.
Now that i have booted into MIUI, i see that it is not detecting the SD card.
Installed Rom manager from market. It wants SD card to be accessed.
The SD card is working fine n my system. I might have formated it the wrong formats or something with the tool "MiniTool Partition Wizard Home Edition"
Please let me know the exact format parameters.
I am formating as FAT32 - LOGICAL and another ext3 - LOGICAL
firoz3321 said:
I am formating as FAT32 - LOGICAL and another ext3 - LOGICAL
Click to expand...
Click to collapse
I would just recommend partitioning the card through recovery. Recovery will partition it the way it needs to be done. Just back up anything that is currently on the card.
You can't "click Recovery".
When you're in bootloader menu, you need to select the RECOVERY option using VOLUME UP/DOWN buttons, and press POWER button to select the option. If you can't - it means you're not doing it correctly.
The Wiki has section "Recovery", look at it and if you happen to have no recovery - flash a new one using the guide for unlocked bootloader there.
please how to flash stunner 2 in my n7000 , i'm in ultimate rom v5.1
Ultimate already has a safe kernel. Boot into recovery and go to philz settings and choose clean before new rom install. Once done then install zip and choose the rom.
nokiamodeln91 said:
Ultimate already has a safe kernel. Boot into recovery and go to philz settings and choose clean before new rom install. Once done then install zip and choose the rom.
Click to expand...
Click to collapse
but they say that the phone must to be in cm10 and i tried to install cm10 attached in the rom thread and operation failed "install aborted"
You need to update philz kernel to 3.99 or above. Then it will work.. It's safe to install the rom when you have philz kernel.
nokiamodeln91 said:
You need to update philz kernel to 3.99 or above. Then it will work.. It's safe to install the rom when you have philz kernel.
Click to expand...
Click to collapse
i did as u say they tell operation aborted and tell me that message status 7
Download hydracore, go into recovery flash that (do not reboot) and go to advanced and reboot recovery... once you're in the new recovery do all the necessary wipes and install
https://sourceforge.net/projects/maxfuacm/files/Galaxy Note/MaxFu_HydraCore/n5.JBT/
Eng_sabba7 said:
i did as u say they tell operation aborted and tell me that message status 7
Click to expand...
Click to collapse
Also check the md5 of the downloaded rom. May be that is corrupt
nokiamodeln91 said:
Also check the md5 of the downloaded rom. May be that is corrupt
Click to expand...
Click to collapse
i tried to use another copy of ultimate rom .zip file and putting it in the memory card it work until finish setup rom :victory: put then device restart to recovery screen again i tried to select "reboot system now " put device restart again to recovery !!!!!!!!!!!!!!! wat to do friend
Boot into recovery recovery and do a factory reset. And then reboot.
---------- Post added at 06:05 PM ---------- Previous post was at 06:04 PM ----------
So this time the flash finished well?
nokiamodeln91 said:
Boot into recovery recovery and do a factory reset. And then reboot.
---------- Post added at 06:05 PM ---------- Previous post was at 06:04 PM ----------
So this time the flash finished well?
Click to expand...
Click to collapse
i had select wipe data / factory reset >>> that operation finished then i restart device :crying: put it's show samsung screen then closed or restart then samsung screen then recovery screen again
Eng_sabba7 said:
i had select wipe data / factory reset >>> that operation finished then i restart device :crying: put it's show samsung screen then closed or restart then samsung screen then recovery screen again
Click to expand...
Click to collapse
U are an Indian the best in programming in all the world u must to have a solution
Ok go to recovery again and then to philz settings and choose clean before new rom install. Once that's done. Install the rom again and check.
nokiamodeln91 said:
Ok go to recovery again and then to philz settings and choose clean before new rom install. Once that's done. Install the rom again and check.
Click to expand...
Click to collapse
i did that before >>>> but will try again MANY THANKS FOR UR EFFORTS
Ok let's see what happens.
the same problem i despair <<<<<
Better now put the phone in download mode and flash a stock rom. If you choose ics then do not wipe on stock recovery.
flash by odin ???
???
---------- Post added at 07:54 PM ---------- Previous post was at 07:16 PM ----------
Download a stock rom. Follow this thread
http://forum.xda-developers.com/showthread.php?t=1424997
i mean flash rom using odin program ?
Yes. This way you will get back to factory settings.
[Recovery] & [Root]【T210R & T210】 CWM Recovery v6.0.4.9.KK [Unofficial]
READ THIS POST BEFORE INSTALLING ANY CUSTOM RECOVERY
Updated to CWM v6.0.4.9.KK on 9-23-14 to cooperate with KitKat bootloader.
Now with SELinux enabled kernel for flashing roms that require it
Click HERE for the latest version.
Compiled from source.
@ketut.kumajaya has provided us with a kernel for CWM recovery.
Please report any bugs here in this thread.
Please take a moment to say thanks and/or donate to @ketut.kumajaya for helping us out.
Thank you to everyone who has (and still will) help in testing!!!!
Credits go to:
@ketut.kumajaya for getting this initially working (see THIS post)
@Jamison904 for giving us root
@hkjr for getting ketut to help
@k.aibutsu and @Unjustified Dev for there device source work
and of course Koush and the CyanogenMod team
@Tomsgt for the video
Link to kernel source https://github.com/kumajaya/android_kernel_samsung_lt02
Watch THIS VIDEO tutorial for a step by step visual guide for performing the instructions listed below (thanks @Tomsgt for the video).
Supplied in 3 formats:
Odin flashable tar.md5 (for first time installation)
Recovery flashable zip (requires a custom recovery to currently be installed)
.img file (for those who use Flashify or other direct methods).
Instructions for Odin: (use the ...tar.md5)
1. Download ODIN to your computer.
2. Power off the device.
3. Restart in "Download Mode" by holding the "HOME" button, "Volume Down" and "Power" all at the same time (for about 5 seconds).
4. Hit the "Volume Up" to enter download mode.
5. Start the ODIN exe program. Un-check Auto Reboot. See notes about ODIN below.
6. Connect the device via USB to your computer. Verify the device shows as "Added" in the Message box. If it doesn't show then you need the Samsung USB drivers (just install KIES to get them).
7. Select "PDA" then choose the recovery file you want to flash.
8. Hit "START". Wait for Odin to finish (~10-15 seconds). The message area will display "RES OK" when finished.
9. Wait for device to restart. Skip this step if you unchecked auto reboot.
10. Restart directly to recovery mode before rebooting into OS.(Hold POWER, Volume UP, and the HOME button all at the same time. When you see the Samsung Logo, let go of the POWER button, but keep holding the Volume UP and HOME until you see the recovery screen).
After you get the custom recovery working, you can flash the latest SuperSu zip to get root.
Notes about ODIN
--Make sure that "Re-Partition" is NOT checked.
--Auto Reboot can be un-checked if CWM doesn't flash correctly on your device. Some have reported that un-checking Auto Reboot fixes this issue. If you un-check Auto Reboot, you will need to reboot the device yourself (refer back to step 10).
~~~~~~~~~~~~~~~~~~~~~~~~~~~
Watch this video to learn about the navigation issues and Rainbow Mode: http://youtu.be/iCNdxlNzdBI
If the highlight doesn't move on the recovery menu, the selection actually does change. Go ahead and hit Power to select. If the menu goes blank, just hit Volume Up or Down to get it to reappear.
It appears that the menu navigation issue only happens when you use the button combination to boot into recovery. If you use the Quick Boot app or "adb reboot recovery", it seems to work properly.
~~~~~~~~~~~~~~~~~~~~~~~~~~~
Instructions for recovery flashable version:
Boot into your previously installed custom recovery.
Select the Install Zip option.
Find the recovery zip.
Flash.
Reboot recovery.
Enjoy your new recovery.
Flash at own risk!!!!
+++++++++++++++++++++++++++++++
DOWNLOADS
Click HERE for the latest version.
-
If you are using the recovery in post #1, then you can skip this post. This post contains modified stock recoveries only.
I recommend all T210R users should flash the newest firmware from Sammobile, ( or just use my pre-rooted version located HERE ).
The modified stock recovery zips below contain a recovery.tar.md5 file that can be flashed using ODIN. These will allow only Google test key signed zips to be flashed. There are two versions, one for the T210R and one for the T210 devices. Both versions work on my T210R, so try whichever one you feel is appropriate.
gr8nole said:
Since we don't have a working full custom recovery (i.e., TWRP or CWM) yet, we have modified the stock recovery to accept update zips that are signed with the Google test keys.
The zips below contain a recovery.tar.md5 file that can be flashed using ODIN. There are two versions, one for the T210R and one the T210 devices. Both versions work on my T210R, so try whichever one you feel appropriate.
Credits go to:
@ketut.kumajaya for getting this initially working (see THIS post)
@Jamison904 for giving us root
@hkjr for getting ketut to help
Instructions:
1. Download ODIN on your computer (just do a google search to find it...version 3.07 will work fine). http://forum.xda-developers.com/showthread.php?t=2189539
2. Power off the device.
3. Restart in "Download Mode" by holding the "HOME" button, "Volume Down" and "Power" all at the same time (for about 5 seconds).
4. Hit the "Volume Up" to enter download mode.
5. Start the ODIN exe program.
6. Connect the device via USB to your computer. Verify the device shows as "Added" in the Message box. If it doesn't show then you need the Samsung USB drivers (just install KIES to get them).
7. Select "PDA" then choose the recovery file you want to flash.
8. Hit "START"
9. Wait for device to restart.
10. Restart to recovery mode to verify it works. It looks just like stock recovery.
It is not as difficult as it looks.
Please report if it works for you and what firmware and device (T210R or T210) you have.
Flash at own risk!!!!
Click to expand...
Click to collapse
Ok. I just flashed the original firmware. Still i cant get into recovery. Then i flashed your modified recovery, but no luck. Now i have tried T210_SAMSUNG_RECOVERY_SUPERSU-1.55_BUSYBOX-1.22.0.tar and then it boots direct in to recovery, but i can not navigate..
---------- Post added at 10:04 PM ---------- Previous post was at 09:58 PM ----------
loselvis777 said:
Ok. I just flashed the original firmware. Still i cant get into recovery. Then i flashed your modified recovery, but no luck. Now i have tried T210_SAMSUNG_RECOVERY_SUPERSU-1.55_BUSYBOX-1.22.0.tar and then it boots direct in to recovery, but i can not navigate..
Click to expand...
Click to collapse
One more thing. Its only when i flash T210_SAMSUNG_RECOVERY_SUPERSU-1.55_BUSYBOX-1.22.0.tar it goes in to recovery, But if i yse the volume key and power nothing..
loselvis777 said:
Ok. I just flashed the original firmware. Still i cant get into recovery. Then i flashed your modified recovery, but no luck. Now i have tried T210_SAMSUNG_RECOVERY_SUPERSU-1.55_BUSYBOX-1.22.0.tar and then it boots direct in to recovery, but i can not navigate..
Click to expand...
Click to collapse
To make sure you are entering recovery correctly, can you install Quick Boot from the play store and use it to enter recovery mode.
gr8nole said:
To make sure you are entering recovery correctly, can you install Quick Boot from the play store and use it to enter recovery mode.
Click to expand...
Click to collapse
No needs root.. just shuts down..
i think one of the problemt is the cache file maybe..
---------- Post added at 10:31 PM ---------- Previous post was at 10:18 PM ----------
loselvis777 said:
No needs root.. just shuts down..
i think one of the problemt is the cache file maybe..
Click to expand...
Click to collapse
by the way when i use T210_SAMSUNG_RECOVERY_SUPERSU-1.55_BUSYBOX-1.22.0.tar i get..
E:Error in /cache/recovery/uroot.zip and stock android recovery..
---------- Post added at 10:49 PM ---------- Previous post was at 10:31 PM ----------
loselvis777 said:
No needs root.. just shuts down..
i think one of the problemt is the cache file maybe..
---------- Post added at 10:31 PM ---------- Previous post was at 10:18 PM ----------
by the way when i use T210_SAMSUNG_RECOVERY_SUPERSU-1.55_BUSYBOX-1.22.0.tar i get..
E:Error in /cache/recovery/uroot.zip and stock android recovery..
Click to expand...
Click to collapse
now i want to try something new.. I just downloaded jamisons prerooted uk firmware, and then i will try the recovery again..
loselvis777 said:
No needs root.. just shuts down..
i think one of the problemt is the cache file maybe..
---------- Post added at 10:31 PM ---------- Previous post was at 10:18 PM ----------
by the way when i use T210_SAMSUNG_RECOVERY_SUPERSU-1.55_BUSYBOX-1.22.0.tar i get..
E:Error in /cache/recovery/uroot.zip and stock android recovery..:
Click to expand...
Click to collapse
FWIW...I got that error too, but I'm already rooted.
loselvis777 said:
No needs root.. just shuts down..
i think one of the problemt is the cache file maybe..
---------- Post added at 10:31 PM ---------- Previous post was at 10:18 PM ----------
by the way when i use T210_SAMSUNG_RECOVERY_SUPERSU-1.55_BUSYBOX-1.22.0.tar i get..
E:Error in /cache/recovery/uroot.zip and stock android recovery..
---------- Post added at 10:49 PM ---------- Previous post was at 10:31 PM ----------
now i want to try something new.. I just downloaded jamisons prerooted uk firmware, and then i will try the recovery again..
Click to expand...
Click to collapse
Okay.. I flashed jamisons prerooted firmware. So now im a superuser. And i have root. I use quick boot to go to recovery, and then i flashed universal-root-t21x-signed.zip from recovery. Its seems that it works now. So now all we have to do is wait for custom roms fingers crosed..
---------- Post added at 11:37 PM ---------- Previous post was at 11:07 PM ----------
Hate to say this. But this means that there is still no root and recovery for original firmware.
So here is a new guide for SM-T210 with normal firmware
Download https://mega.co.nz/#!dkQ1iSYQ!N7TdP2uBs-kc7CYBXnBVMwJyrRQqhoXIXY-90z1nG1E preerootet firmware
Flash with odin PDA. Now you are a superuser
then flash T210_modified_recovery.zip
Install quick boot from playstore.
go to recovery from quickboot and flash universal-root-t21x-signed.zip
http://forum.xda-developers.com/showthread.php?t=2391367&page=27
Now wait for custom roms
loselvis777 said:
Okay.. I flashed jamisons prerooted firmware. So now im a superuser. And i have root. I use quick boot to go to recovery, and then i flashed universal-root-t21x-signed.zip from recovery. Its seems that it works now. So now all we have to do is wait for custom roms fingers crosed..
---------- Post added at 11:37 PM ---------- Previous post was at 11:07 PM ----------
Hate to say this. But this means that there is still no root and recovery for original firmware.
So here is a new guide for SM-T210 with normal firmware
Download https://mega.co.nz/#!dkQ1iSYQ!N7TdP2uBs-kc7CYBXnBVMwJyrRQqhoXIXY-90z1nG1E preerootet firmware
Flash with odin PDA. Now you are a superuser
then flash T210_modified_recovery.zip
Install quick boot from playstore.
go to recovery from quickboot and flash universal-root-t21x-signed.zip
http://forum.xda-developers.com/showthread.php?t=2391367&page=27
Now wait for custom roms
Click to expand...
Click to collapse
If you already have prerooted firmware, then you don't need to flash the universal root zip. You can install SuperSu from play store.
gr8nole said:
If you already have prerooted firmware, then you don't need to flash the universal root zip. You can install SuperSu from play store.
Click to expand...
Click to collapse
I had to flash it to see if would do on the uk firmware. When i flash on the original, it made kernel panic.
Now i can flash it. Wanna hears something strange? My CSC is still NEE(nordic)
I think this relates also to the bootloader version. I will try to build T210 kernel with LZMA initramfs support so we can create a small recovery image. Blame Samsung/Marvell :laugh:
gr8nole said:
Since we don't have a working full custom recovery (i.e., TWRP or CWM) yet, we have modified the stock recovery to accept update zips that are signed with the Google test keys.
The zips below contain a recovery.tar.md5 file that can be flashed using ODIN. There are two versions, one for the T210R and one for the T210 devices. Both versions work on my T210R, so try whichever one you feel is appropriate.
Credits go to:
@ketut.kumajaya for getting this initially working (see THIS post)
@Jamison904 for giving us root
@hkjr for getting ketut to help
Flash at own risk!!!!
Click to expand...
Click to collapse
Awesome job my friend! Working one the first custom ROM now. Should be up tonight. (maybe kernel...muhahaha)
gentlemen - i go without my kids tablet (lol they get the tab3 and i keep the tab2) for 24 hrs or so, and you've gotten to this point? awesome. goes to show everyone's skills and cooperation!
The modified stock recovery does not work for t210r. It still has navigation errors and flashing a google signed.zip(ex. Universalrootsigned.zip) has error called status 7. The only recovery that can run the signed root even in original firmware is the 2nd recovery posted by ketut.kumajaya.
I posted this on the root method thread
Sent from my SM-T210R using xda app-developers app
trazfer said:
The modified stock recovery does not work for t210r. It still has navigation errors and flashing a google signed.zip(ex. Universalrootsigned.zip) has error called status 7. The only recovery that can run the signed root even in original firmware is the 2nd recovery posted by ketut.kumajaya.
I posted this on the root method thread
Sent from my SM-T210R using xda app-developers app
Click to expand...
Click to collapse
It seems to be hit or miss. It works great on my T210R and I tested it with a signed zip.
I plan on returning to stock non-rooted tomorrow and testing more.
Jamison904 said:
Awesome job my friend! Working one the first custom ROM now. Should be up tonight. (maybe kernel...muhahaha)
Click to expand...
Click to collapse
So we can get custom ROMs even with this non CWM/TWRP Recovery??!?!? And you're uploading tonight?.... I'm so excited I might as well explode
Sent from my SM-T210 using xda premium
gr8nole said:
It seems to be hit or miss. It works great on my T210R and I tested it with a signed zip.
I plan on returning to stock non-rooted tomorrow and testing more.
Click to expand...
Click to collapse
I will test more. I will take into consideration ur output. Well i managed to root the original firmare of t210r using the modified recovery and flashing of universalrootsigned.zip in the modified recovery.
Sent from my SM-T210R using xda app-developers app
I compiled recovery kernel from source: http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=t210 + http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=exfat . LZMA support added, the attached recovery image compressed in LZMA format (smaller). I also slightly change my "universal" root, remove device model checking routine. Both package untested, flash it at your own risk!
NOTE: Kernel compiled using Google's arm-eabi 4.6, *lt023g_defconfig. Just compared 3g and wifi defconfig and saw different GPIO config (different buttons behavior?) I need T210 "cat /proc/version" output and please, a quick feedback :good:
Just uploaded the world's smallest Android recovery Both kernel and ramdisk compressed using xz compression method. Try it, may open the opportunities of CWM
Non of the recovery works in my rooted 210R. Same navigation issue.
Sent from my GT-N7100 using xda premium
ketut.kumajaya said:
I compiled recovery kernel from source: http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=t210 + http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=exfat . LZMA support added, the attached recovery image compressed in LZMA format (smaller). I also slightly change my "universal" root, remove device model checking routine. Both package untested, flash it at your own risk!
NOTE: Kernel compiled using Google's arm-eabi 4.6, *lt023g_defconfig. Just compared 3g and wifi defconfig and saw different GPIO config (different buttons behavior?) I need T210 "cat /proc/version" output and please, a quick feedback :good:
Click to expand...
Click to collapse
My results from testing this morning.
I did a factory data reset and then flashed the full US (T210R) firmware to return to completely stock non-rooted status. Then I flashed the T210R modified stock recovery (that I posted here yesterday) and it worked perfectly. I then flashed the new universal root zip provided by @ketut.kumajaya (it did return one error 7 at the end, but still worked) and I was rooted. :good:
I then tried the ketut's new T210R LMZA recovery and it did work, but still had navigation issues. :good:
I then tried ketut's new XZ recovery, but got a kernel panic. :crying:
So, at least for my T210R (with the newest T201R firmware from Sammobile), the recovery in the OP still works perfect.
I look forward to hear more feedback from others users, but for now, I recommend all T210R users should flash the newest firmware from Sammobile, ( or just use my pre-rooted version located HERE ) then give the modified recovery a try.
Hello. I have found too confusing to find right thread about root for s4a 9295. Most threads about root are mixed with i537, so i think separate thread for 9295 regarding it will be good decision.
Instruction:
1. Install custom recovery via Odin (i use recovery by Mythi, look for the download link in his thread http://forum.xda-developers.com/showthread.php?t=2752469);
2. Donload Superuser zip UPDATE-SuperSU-v1.99r3.zip
3. Copy su.zip to sdcard or internal memory;
4. Download in recovery mode;
5. Choose install zip from sd card (if zip on internal memory) or Choose zip from storage/sdcard1 (if zip on external sd card);
6. Install UPDATE-SuperSU-v1.99r3.zip;
7. After instaling, choose reboot to system, if recovery ask to fix root rights, choose NO;
8. After boot, start super user app and confirm disabling for Knox;
9. Conglaturations, you are rooted.
6783 said:
Hello. I have found too confusing to find right thread about root for s4a 9225. Most threads about root are mixed with i537, so i think separate thread for 9225 regarding it will be good decision.
Instruction:
1. Install custom recovery via Odin (i use recovery by Mythi, look for the download link in his thread http://forum.xda-developers.com/showthread.php?t=2752469);
2. Donload Superuser zip UPDATE-SuperSU-v1.99r3.zip
3. Copy su.zip to sdcard or internal memory;
4. Download in recovery mode;
5. Choose install zip from sd card (if zip on internal memory) or Choose zip from storage/sdcard1 (if zip on wxternal sd card);
6. Install UPDATE-SuperSU-v1.99r3.zip;
7. After instaling, choose reboot to system, if recovery ask to fix root rights, choose NO;
8. After boot, start super user app and confirm disabling for Knox;
9. Conglaturations, you are rooted.
Click to expand...
Click to collapse
Many Thanks.............Rooted at last....
I am running the PHN-I9295XXUCNE5-20140527111402 ROM - and the above standing procedure worked for me.
Remember to Choose "No" in step no# 7 otherwise it will not work.
Thank you,
Works for me!!!!!
Unless you have yet another device (9225 ???) ...gsmarena.com has a looot of phone records but none for this.
6783 said:
Hello. I have found too confusing to find right thread about root for s4a 9225. Most threads about root are mixed with i537, so i think separate thread for 9225 regarding it will be good decision.
Click to expand...
Click to collapse
I guess you are contributing to the confusion by starting this thread.
GT-I9220 - Note
GT-I9225 - ????????
GT-I9228 - Note
GT-I9295 - S4 Active
root stock 4.4 for s4 active i9295
6783 said:
Hello. I have found too confusing to find right thread about root for s4a 9295. Most threads about root are mixed with i537, so i think separate thread for 9295 regarding it will be good decision.
Instruction:
1. Install custom recovery via Odin (i use recovery by Mythi, look for the download link in his thread http://forum.xda-developers.com/showthread.php?t=2752469);
2. Donload Superuser zip UPDATE-SuperSU-v1.99r3.zip
3. Copy su.zip to sdcard or internal memory;
4. Download in recovery mode;
5. Choose install zip from sd card (if zip on internal memory) or Choose zip from storage/sdcard1 (if zip on wxternal sd card);
6. Install UPDATE-SuperSU-v1.99r3.zip;
7. After instaling, choose reboot to system, if recovery ask to fix root rights, choose NO;
8. After boot, start super user app and confirm disabling for Knox;
9. Conglaturations, you are rooted.
Click to expand...
Click to collapse
this procedure worked for me, im on i9295 stock 4.4.2
Thanks
Gerardo Mar.
yes it function, thx
I did this also but whit out these instructions... i went to hit yes when rebootting... The phosne is rooted yes, but i can't moun't back up..or flash anything else... does new reboot help???
Okay.. i did everything.. i re-flashed supersu, booted, re-booted and said no to rootfix.. Usb debugging on , and supersu apk setting checked and there is head user allowed..
I tried to make back up again but it did not work.
CWM starts to make back up but on the end it said can´t mount it... if i check my SD card there is back up folder and i think that there is also back up file (size1,95G).
I tried to restore but CWM saids something MD5 file failed...
So i´m rooted but i can´t flash new rom...
Try to reflash via Odin, and then do according to instruction.
Sent from my GT-I9295 using XDA Premium 4 mobile app
Ok i will try that..
Can it be wrong rom what i have tried to flash... supersu flashing was ok, but when i try to flash samsung stock 4.2.2 rom , it does not work...
Do they have different bootloader.
My phone is also encrypted... does it matter?
pasanen said:
Ok i will try that..
Can it be wrong rom what i have tried to flash... supersu flashing was ok, but when i try to flash samsung stock 4.2.2 rom , it does not work...
Do they have different bootloader.
My phone is also encrypted... does it matter?
Click to expand...
Click to collapse
This method is just for 4.4.2
Sent from my ME173X using xda premium
I know.. i'm now 4.4.2. and i'm trying to get back to 4.2.2 stock.
Then just flash 4.2.2 via Odin.
Sent from my GT-I9295 using XDA Premium 4 mobile app
It does not work... if i flash new rom (4.2,2 stock) using odin , flashing procedure stops and fails.. phone gets stucked and only way to get phone working is to flash KK stock firmware back...
So maybe i'm having some issue with the rom... i can' t find any another working. rom.... so i' m dead end.....
pasanen said:
It does not work... if i flash new rom (4.2,2 stock) using odin , flashing procedure stops and fails.. phone gets stucked and only way to get phone working is to flash KK stock firmware back...
So maybe i'm having some issue with the rom... i can' t find any another working. rom.... so i' m dead end.....
Click to expand...
Click to collapse
Hi the problem is that your bootloader is locked and it wont let you go back to 4.2.2 because of that... I read on the forum safetrap take a look on it. This may help you
---------- Post added at 10:10 PM ---------- Previous post was at 09:56 PM ----------
Hi all,
I know rooting with samsung is a bit annoying with flash counter and now knox, but I would like to know if this this method if it activate know or flash counter? As I don't want to lost my warranty.
Thanks in advance
6783 said:
(if zip on wxternal sd card)
Click to expand...
Click to collapse
Just this wxternal!
Jhon998 said:
Just this wxternal!
Click to expand...
Click to collapse
Fixed
6783 said:
Fixed
Click to expand...
Click to collapse
and why ( ; ) instead of ( . )?
Ultiweap said:
Hi the problem is that your bootloader is locked and it wont let you go back to 4.2.2 because of that... I read on the forum safetrap take a look on it. This may help you
---------- Post added at 10:10 PM ---------- Previous post was at 09:56 PM ----------
Hi all,
I know rooting with samsung is a bit annoying with flash counter and now knox, but I would like to know if this this method if it activate know or flash counter? As I don't want to lost my warranty.
Thanks in advance
Click to expand...
Click to collapse
Okay..
I9295 does not have locked bootloader... so i managed to solve my problem..
For some reason i could not to make backup of stock rom so just wiped all and flashed 4.3 slim and configured it and backupped...
I also flashed stock deoxed JB, and now i can get drivelink app to work again.
I also tried to flash safestrap but there was no SS to i9295 so i tried us version SS.
Everything works fine but i could not to make any rom slots.. i did not have enough memory.... but for real there was plenty of memory..
One problem is that every time i try to flash stock jb it soft bricks the phone... kk flash is fine..
Has anyone try to use hemidall???
can someone help
Hello
I have little problem first three stages I have done, but fourth stage I don't understund
4. Download in recovery mode;
does that mean i should go cwm and instal there su.zip or what
flashing via odin went well and i got green pass after flashing. But I dont see cwm anywhere when starting phone recovery, it goes original recovery not cwm.
Not sure if someone has the patience for a newbie here but it's my last hope. got this phone from a reliable source he bought it new tried to unlock the bootloader and screwed up in the middle of the process. I have no idea how fix it as far as what software I ned and how ot use it and which to steps to take. I tried all options in the power plus volume recovery mode, non work, here is what I get:
http://i57.tinypic.com/2d0ngqs.jpg
http://i57.tinypic.com/2v1klqw.jpg
http://i61.tinypic.com/x0s67q.jpg
http://i60.tinypic.com/xoe5oo.jpg
http://i60.tinypic.com/5vn0i0.jpg
http://i57.tinypic.com/mkhfrq.jpg
http://i57.tinypic.com/208enbo.jpg
http://i57.tinypic.com/28ckhh4.jpg
http://i60.tinypic.com/x1alqq.jpg
http://i57.tinypic.com/2dc8n12.jpg
http://i59.tinypic.com/15cd9gg.jpg
http://i57.tinypic.com/mmqu0z.jpg
http://i61.tinypic.com/2vn45mq.jpg
http://i62.tinypic.com/2h2mkhi.jpg
http://i57.tinypic.com/25aj6n9.jpg
http://i60.tinypic.com/2en8g9z.jpg
Any ideas?
Cheers
It looks like you have a custom recovery and need to flash a ROM. Try downloading a ROM from XDA and flashing it. You need to put the ROM on an SD card and flash it using the menu options.
scitech09 said:
It looks like you have a custom recovery and need to flash a ROM. Try downloading a ROM from XDA and flashing it. You need to put the ROM on an SD card and flash it using the menu options.
Click to expand...
Click to collapse
don't have a sd card, can I do this with my mac somehow and usb connected to the phone?
also where do I download the rom and how do I flash it with what software?
Look in the XDA Developers forum under "Xperia Z3 Compact Android Development". You will find various ROMs in the discussions as well as links for downloading them. The ROMs well be large ZIP files. Transfer them to the phone using a tool called ADB. You can install this on a Mac and transfer the ZIP via a USB cable.
---------- Post added at 11:25 PM ---------- Previous post was at 11:24 PM ----------
Google's ADB and Mac for installation instructions.
---------- Post added at 11:28 PM ---------- Previous post was at 11:25 PM ----------
Once the ZIP file is on the phone, boot into recovery mode and select "Install ZIP". Then select the ZIP file that you transferred.
So u have cwm, thats good for now.
Download a Rom u want to flash. For example a Stock kitkat Rom.then use the cwm sideload Option to copy it to ur internal storage. When this is done wipe System,Cache &dalvik Cache. Do NOT wipe the internal storage.then flash the zip u Put in via sideload and reboot. If u done all correct System should Boot.
I think I wiped it I know I tried to clean everything and pressed every option, not sure, where is the link for the stock kitkat rom, there are so many pages and links I can't find it.
basti2909 said:
So u have cwm, thats good for now.
Download a Rom u want to flash. For example a Stock kitkat Rom.then use the cwm sideload Option to copy it to ur internal storage. When this is done wipe System,Cache &dalvik Cache. Do NOT wipe the internal storage.then flash the zip u Put in via sideload and reboot. If u done all correct System should Boot.
Click to expand...
Click to collapse
ua101 said:
I think I wiped it I know I tried to clean everything and pressed every option, not sure, where is the link for the stock kitkat rom, there are so many pages and links I can't find it.
Click to expand...
Click to collapse
You have a custom recovery...you cannot therefore flash a stock rom.
Download a custom rom. Place it on your sd card, and flash it from recovery.