Hi,
i saw in a few signaturs that some people are using an "overclocked kernel" with 855mhz?!
How did u do that? I didnt find any thread about updating the kernel.
Thanks and regards
http://android.modaco.com/content/lg-gt540-optimus-gt540-modaco-com/322686/upgrade-kernel-v-0-2-2/
Just install the kernel and install set cpu!
easy.
Awesome Thank u
I tried to install that kernel on my ROM, ROM 2.1 European with fastboot, and the Wi-Fi stopped working, I can't install it . I had to reinstall the ROM to work again, bad luck
bluepower said:
I tried to install that kernel on my ROM, ROM 2.1 European with fastboot, and the Wi-Fi stopped working, I can't install it . I had to reinstall the ROM to work again, bad luck
Click to expand...
Click to collapse
Just install update.zip 4pda.ru/forum/index.php?showtopic=193463&view=findpost&p=5605684
Hi all!
Few days ago i updated my lg p990 via LGMobile update service to 2.3.4 Gingerbread V20m with no problems. I`m from Serbia btw. Then i rooted my phone and installed clockwork recovery to backup my rom. I made a mistake to do that after i performed root so now when i restore my rom the phone is rooted again and i can`t use update utility anymore! It says my model is not suported. I then used SuperOneClick to unroot and r1-stockrecovery-2x-unsigned zip to remove recovery and it did that but still can`t update or restore original stock V20m rom with update utility. I even managed to install V20l ROM and baseband via Smartflash and offcourse still no update posibility and "not supported model" message. Yesterday i downloaded from XDA, Netherland stock V20m but, guess what, still not supported. Can anyone tell me how to or what to do to make my phone update officialy again with LG tool. THNX in advance
..................................................
Well you have go download correct files. I don't remember very well where the download location is.
But I have managed to do full installation of original lg software over the cyanogenmod.
There is a step by step guide on this forum how to do this.
I am from Croatia and after that my phone accept automaticly update.
Now I am on Cyanogenmod because it is so much better than stock.
Sent from my Optimus 2X using Tapatalk
tomislav177 said:
Well you have go download correct files. I don't remember very well where the download location is.
But I have managed to do full installation of original lg software over the cyanogenmod.
There is a step by step guide on this forum how to do this.
I am from Croatia and after that my phone accept automaticly update.
Now I am on Cyanogenmod because it is so much better than stock.
Sent from my Optimus 2X using Tapatalk
Click to expand...
Click to collapse
I downloaded stock V20m rom from http://forum.xda-developers.com/showthread.php?t=1035041 and still not supported with update. Can u please find what u did and post here!? I don`t know what i didn`t try and nothing worked so far. And i have GPS isue so i have to restart phone with gps ON and then it works. I didn`t have that problem when i updated to V20m first time. I have read that it`s a problem on V20l but not on V20m. U said u use custom rom!? Is everything working properly!? No workarounds to make something work like this GPS problem!?
Hello, I'd like to update my phone using Smartflash.
I have an official V20B rom which is rooted. I would like to install a new official rom but i'm completely lost when it comes to choosing the right version !
Where can I get the official V20S stock rom (which can be installed with smartflash)
Also, is there any official ICS rom ? (same, for smartflash), if so, is it fully stable ? Where can I get it ? (LG Mobile update says my phone is up to date... Huh)(I have read that you need to change the boot partition or something like that with ICS roms, is it valid for official ICS roms from LG too ?).
Do I have to unroot my phone before installing a new rom with Smartflash ?
Thanks.
Okkx said:
Hello, I'd like to update my phone using Smartflash.
I have an official V20B rom which is rooted. I would like to install a new official rom but i'm completely lost when it comes to choosing the right version !
Where can I get the official V20S stock rom (which can be installed with smartflash)
Also, is there any official ICS rom ? (same, for smartflash), if so, is it fully stable ? Where can I get it ? (LG Mobile update says my phone is up to date... Huh)(I have read that you need to change the boot partition or something like that with ICS roms, is it valid for official ICS roms from LG too ?).
Do I have to unroot my phone before installing a new rom with Smartflash ?
Thanks.
Click to expand...
Click to collapse
1. Make sure that you have P990.
2. V20B should be a gingerbread.
3. If you read one post below yours, you could’ve find exactly what you ask official ICS for smartflash.
Cheers.
Vosetal said:
1. Make sure that you have P990.
2. V20B should be a gingerbread.
3. If you read one post below yours, you could’ve find exactly what you ask official ICS for smartflash.
Cheers.
Click to expand...
Click to collapse
I actually have V10B sorry !
I will update via LG Tools with the kdz instead of smartflash. Is there anything to do specifically to keep my data in the phone or is it saved automatically in the LG Tools update process ?
Thanks
Okkx said:
I actually have V10B sorry !
I will update via LG Tools with the kdz instead of smartglash. Is there anything to do specifically to keep my data in the phone ?
Thanks
Click to expand...
Click to collapse
I think updating via LG Tool doesn't erase data on your phone... however I would strongly advise you to synchronize your contacts with gmail and backing up you apps with titanium backup in an external sd card.
Update via LG Tool didn't erase my data when I went from 2.2 to 2.3
LarsPT said:
I think updating via LG Tool doesn't erase data on your phone... however I would strongly advise you to synchronize your contacts with gmail and backing up you apps with titanium backup in an external sd card.
Click to expand...
Click to collapse
Yes, flashing kdz do not wipe anything.
Sent from my LG-P990 using xda app-developers app
i make root to my phone and i want to make flash but it give ( security error ) and i try to solve it from flash tool with room V30C_00.kdz
but give the same problem ,my phone is LG p970 and my room was ICS 4.0.4
pleas help me.
which flash tool ? use smartflash with proper files. the firmware should have an integrated recovery mod for letting you doing a factory reset
body_90 said:
i make root to my phone and i want to make flash but it give ( security error ) and i try to solve it from flash tool with room V30C_00.kdz
but give the same problem ,my phone is LG p970 and my room was ICS 4.0.4
pleas help me.
Click to expand...
Click to collapse
you need to install an earlier version (V20X) and then upgrade to version (V30X) 4.0.4 or better go to cm10.1 or 4.2.2 Mackay ... SmartFlash and y need to use bin files ...
ICS 4.0.4 no good for root or use rom manager = security error ...
*sorry bad english , im brazilian ... I'm learning ..
u should flash v10(froyo) using smart flash tool and then root by ginger break and install rom manager and CWM.
if u find v10 rom send its link to me pls!
AZjaguar said:
u should flash v10(froyo) using smart flash tool and then root by ginger break and install rom manager and CWM.
if u find v10 rom send its link to me pls!
Click to expand...
Click to collapse
wrong link sorry ...
Samsung Galaxy S III i9305 LTE
flashed with CWM 10.1.3 (based on Android 4.2.2)
Compilation number: cm_i9305-userdebug 4.2.2 JDQ39E eng.jenkins.20130923.145024 test-keys
Photo camera stopped from working.
When I tap on Camera icon there is message that can't connect to camera. Camera is not starting.
I read probably everything. I did everything that I suppoused that can help me ... no results
There is lot of possible sollutions, but none of them provides result. I hope that anybody known solution ...
There is one post which I dont understand:
http://forum.xda-developers.com/galaxy-s3/general/jb-4-1-2-camera-driver-t2006128
> 1. Please dial in stock dialer the following: *#34971539#
What does it mean ?
When I tried to call this number (like normal phone call) I have message (in translation to english): "There is a problem with connection or MMI code is not correct"
PS.
When I flashed CWM 11 camera was working but I need to have CWM10 because is based od Android < 4.4
I have to had Android 4.1 – 4.3 because only on those version Samsung DriveLink application is working.
I want to use phone in my Toyota car with mirror link for full mirroring car's display.
Drive link from GooglePlay:
https://play.google.com/store/apps/details?id=app.scm&hl=pl
And Drivelink from Samsung:
supported android versions: 4.1 – 4.3
Hello and good evening/night? ?,
it's a known problem on all ROMs for I9305. I am on Resurrection Remix 5.5.5 Sammy and have the same problem.
No one of the devs had found a solution for this.
even DriveLink not works
Trafalgar Square said:
Hello and good evening/night? ,
it's a known problem on all ROMs for I9305. I am on Resurrection Remix 5.5.5 Sammy and have the same problem.
No one of the devs had found a solution for this.
Click to expand...
Click to collapse
even DriveLink not works I am a little bit depressed ... I lost guarantee for my smartfon without any result ((
howto install jellybean 4.3 original but with CWM bootloader ?
marcint43 said:
even DriveLink not works I am a little bit depressed ... I lost guarantee for my smartfon without any result ((
Click to expand...
Click to collapse
Do you know how to install 4.3 Jellybean original version - preferably with my current CWM bootloader ?
Maybe original version of android - no Cyanogen wil work ...
in 4.3 version of android there is a chance to do that ...
marcint43 said:
Do you know how to install 4.3 Jellybean original version - preferably with my current CWM bootloader ?
Maybe original version of android - no Cyanogen wil work ...
in 4.3 version of android there is a chance to do that ...
Click to expand...
Click to collapse
Just flash the stock firmware with odin.
Try THIS SITE and see if your country region is there
If not sammobile.com has a comprehensive list(the download is very slow)
can I put any of those zip files ?
noppy22 said:
Just flash the stock firmware with odin.
Click to expand...
Click to collapse
but this will erase my CWM recovery, is it true ?
Is it possible to have CWM recovery with stock Android ?
I downloaded from Sammobile ZIP: I9305XXUEML9_I9305PRTEML1_PRT.zip (this is 4.3 android)
..but for now I have I9305XXUFNJ1 displayed in my phone ... is this OK or I can brick my phone ?
In pull-down menu there are possibilities:
2014-10-01 Poland (T-mobile) 4.3 I9305XXUENH1 I9305TPLENH1
2014-05-01 Poland (T-mobile) 4.3 I9305XXUENC1 I9305TPLENE1
2014-01-01 Poland (PLUS) 4.3 I9305XXUEMKC I9305PLSEMK1 NO
2014-01-01 Poland (Play) 4.3 I9305XXUEML9 I9305PRTEML1 <<<====This one I downloaded, from:
sammobile /firmwares/download/24228/I9305XXUEML9_I9305PRTEML1_PRT/
I don't know if I have "branded" phone ... for Poland there are "Play" "Tmobile" Plus" zip file...
I know that previous owner of phone bought it at "Orange" telecomunication operator. I dont see any operator logo etc on phone ...
Is this relevant which version I will take ?
Maybe just "the newer the better" ?
Odin doesn't works for me on any windows machine that I have. I am struggling with Heimdall software ...
I successfully made this:
heimdall flash --RECOVERY recovery-clockwork-touch-6.0.4.7-i9305.img --no-reboot
region ok, but ...
noppy22 said:
Try THIS SITE and see if your country region is there
Click to expand...
Click to collapse
yes there is my region (Poland) but only 4.4.4 version
marcint43 said:
yes there is my region (Poland) but only 4.4.4 version
Click to expand...
Click to collapse
I see 4.3 - I9305XXUENC1 / TPLENE1 Poland T-Mobile version from the tsar3000 site?? Anyway the one you downloaded from sammobile will be fine
The branded versions only give you different bloatware. It shouldn't make any difference otherwise(other than slightly older/newer baseband). And yes it will overwrite the recovery, but you can install cwm later.
I'm not sure what the process is exactly with heimdall as I have odin, but I think it is similar
noppy22 said:
I see 4.3 - I9305XXUENC1 / TPLENE1 Poland T-Mobile version from the tsar3000 site??
Click to expand...
Click to collapse
yes, I see it on the list, but when I try to download via "mirror 1 or 2 links" - I am redirected to another list - where there is only 4.4.4 versions
After few hours I have to go to work, so I am going to sleep now, but tomorrow I will flash phone with that version
Did you heard that flashing from 4.4.4 just to 4.3 will brick the phone ? (because of changes in "knox bootloader"??? My coleague says that ...)
and "I have to downgrade to 4.2 and than upgrade to 4.3 ... is it true ?
marcint43 said:
yes, I see it on the list, but when I try to download via "mirror 1 or 2 links" - I am redirected to another list - where there is only 4.4.4 versions
After few hours I have to go to work, so I am going to sleep now, but tomorrow I will flash phone with that version
Did you heard that flashing from 4.4.4 just to 4.3 will brick the phone ? (because of changes in "knox bootloader"??? My coleague says that ...)
and "I have to downgrade to 4.2 and than upgrade to 4.3 ... is it true ?
Click to expand...
Click to collapse
What is the latest stock version you have had on the phone? If you have never had 4.4.4 stock, then you should be fine. Just always use the 4.3 to go back to stock and you will always have the old bootloader.
Maybe check your bootloader before you do anything
DriveLink needs GoogleApps libraries! (pure CyanogenMod is not enough)
BINGO! After installing GoogleApps.zip (for 4.4.3) DriveLink app started to run - not crashing anymore ...
but the car still not see any phone ... but this is because of android version ..4.4.4
Android have to be in 4.1-4.3 versions.
noppy22 said:
What is the latest stock version you have had on the phone? If you have never had 4.4.4 stock, then you should be fine. Just always use the 4.3 to go back to stock and you will always have the old bootloader.
Maybe check your bootloader before you do anything
Click to expand...
Click to collapse
Originally I was had 4.4.2 version, original samsung, before any changes.
Then I installed ClockworkMode custom recovery ... and next CyanogenMod 11 android clone (based on 4.4.4 android).
Than I downgraded CyanogenMod to 10.1.3 version (based on 4.2.? android), just because I did'nt find any 10.2 Cyanogen (based on 4.3 android).
Next I again installed CyanogenMod 11 (android 4.4.4) ... as I have now.
Recovery is still CLockworkMode (with TouchPhiz) ...nice and functional (with working adb from my Linux).
Oh, I exactly did that what is described on site: https://wiki.cyanogenmod.org/w/Install_CM_for_i9305
(using CWM as custom recovery)
> Maybe check your bootloader before you do anything
how ? What do you mean ?
marcint43 said:
Originally I was had 4.4.2 version, original samsung, before any changes.
Then I installed ClockworkMode custom recovery ... and next CyanogenMod 11 android clone (based on 4.4.4 android).
Than I downgraded CyanogenMod to 10.1.3 version (based on 4.2.? android), just because I did'nt find any 10.2 Cyanogen (based on 4.3 android).
Next I again installed CyanogenMod 11 (android 4.4.4) ... as I have now.
Recovery is still CLockworkMode (with TouchPhiz) ...nice and functional (with working adb from my Linux).
Oh, I exactly did that what is described on site: https://wiki.cyanogenmod.org/w/Install_CM_for_i9305
(using CWM as custom recovery)
> Maybe check your bootloader before you do anything
how ? What do you mean ?
Click to expand...
Click to collapse
You can see in download mode. It will say something like "Knox warranty void 0x1" or something similar. This means you have the new bootloader.
But anyway, it sounds like you have found a way for drivelink to work? Try installing a custom JB rom like CM 10.1.3 or Alliance rom and you should have it working
CM10.1.3 - drivelink doesnt work
noppy22 said:
You can see in download mode. It will say something like "Knox warranty void 0x1" or something similar. This means you have the new bootloader.
But anyway, it sounds like you have found a way for drivelink to work? Try installing a custom JB rom like CM 10.1.3 or Alliance rom and you should have it working
Click to expand...
Click to collapse
Yes, I have in download mode message about knox 0x1
Even now, when I have CM10.1.3 installed.
unfortunately over CM 10.1.3 DriveLink is crashing
App starting, then it asks me about "DriveLink account" (WTF?) when I skip all questions - Drive link starting up with beautifull picture an then message appears: that Drive Link has been stopped....
PS. without google apps - it crashes immediately
I will try with 4.3 stock android ...(but now I have to charge batteries because CM has been crashed and discharged me battery almost completly )
PS2. I am installing this DriveLink:
http://www.colmoschinxtreme.com/android/item/drivelink
@marcint43
I noticed on the link you posted that drivelink only works with touchwiz. The stock rom should work fine, but another alternative would be to use a custom touchwiz rom like Alliance Rom. I used this rom a while ago and loved the customization and less bloat than stock(plus all the other advantages of having root access)
AllianceROm and heimdall problem with stock
noppy22 said:
Alliance Rom
Click to expand...
Click to collapse
I will try that at first
Just flash with adb sideload is possible ? It is downloading now ... but I see that size is about 1GB ... so is there recovery included ?
I dont understand well what is written on page you have written...
BTW. anybody knows how to use heimdall software to flash stock version ?
this have to be like described on: http://www.htcmania.com/showthread.php?t=698436
?
so: unzip , untar ... and next:
heimdall flash --BOOT boot.img --RECOVERY recovery.img --SYSTEM system.img --CACHE cache.img --HIDDEN hidden.img --RADIO modem.bin --BOOTLOADER sboot.bin --TZSW tz.img
?
(Odin doesn't works for me ... on any computer that I have with windows )
marcint43 said:
Just flash with adb sideload is possible ? It is downloadin.....
Click to expand...
Click to collapse
this was stupid sorry
There is special part of installation guide: .... If you don't want to use ROM Customizer to select your options you can reboot into recovery and flash the ROM zip. Default install is Stock Kernel, All Samsung and Google Apps and Stock Theme.
for startup is the best
Next time I will short ROM
marcint43 said:
I will try that at first
Just flash with adb sideload is possible ? It is downloading now ... but I see that size is about 1GB ... so is there recovery included ?
I dont understand well what is written on page you have written...
Click to expand...
Click to collapse
If you still have CM installed, download "ROM customizer" from the play store, and follow the steps from post #3 in the alliance rom thread. AFAIK the recovery will stay the same as the one you have already
recovery overwritten ?
noppy22 said:
If you still have CM installed, download "ROM customizer" from the play store, and follow the steps from post #3 in the alliance rom thread. AFAIK the recovery will stay the same as the one you have already
Click to expand...
Click to collapse
...ok, but ...by default ... "ALL" .... without Customizer ... this will overwrite my recovery too ? I will lost my CWM recovery and any other will be installed instead ?
marcint43 said:
...ok, but ...by default ... "ALL" .... without Customizer ... this will overwrite my recovery too ? I will lost my CWM recovery and any other will be installed instead ?
Click to expand...
Click to collapse
I can't remember whether the recovery was over-written, I don't think so. It would be easy to re-install your favourite recovery anyway......