Database Develop

[QUESTION]Flash Custom Kernel (CM7)

Hello All,
I used to run DarkyRom 10.2 Extreme. Now I am on Cyanogenmod 7.1.0-GalaxyS.
Phone Details:
ROM: Cyanogenmod 7.1.0-GalaxyS
Android Version: 2.3.7
Baseband Version: I9000XXJVT
Kernel: 2.6.35.12-gdf10700 [email protected] #1 - not sure what kernel this is??
Build Number: GWK74
~Questions:~
Can I flash a custom kernel over the top of this currently installed ROM (like I did when I flashed the JVT Modem to fix my data connection)?
I have read that the Recovery is stored in the Kernel - So if I flash a different kernel will it replace my CwM 5.0.2.6? (I have noticed there are different colours of CwM Recovery - is this because of the kernel?
Thankyou for any help

Swatto86 said:
Hello All,
I used to run DarkyRom 10.2 Extreme. Now I am on Cyanogenmod 7.1.0-GalaxyS.
Phone Details:
ROM: Cyanogenmod 7.1.0-GalaxyS
Android Version: 2.3.7
Baseband Version: I9000XXJVT
Kernel: 2.6.35.12-gdf10700 [email protected] #1 - not sure what kernel this is??
Build Number: GWK74
~Questions:~
Can I flash a custom kernel over the top of this currently installed ROM (like I did when I flashed the JVT Modem to fix my data connection)?
I have read that the Recovery is stored in the Kernel - So if I flash a different kernel will it replace my CwM 5.0.2.6? (I have noticed there are different colours of CwM Recovery - is this because of the kernel?
Thankyou for any help
Click to expand...
Click to collapse
Yes you can flash custom kernels, just be sure that the kernel you flash is for Cm7/MIUI and not sammy stock ROM. I have tried Glitch myself a couple times, but I stay on stock CM7 kernel for the moment since i find it more stable.
Peace out!

Swatto86 said:
~Questions:~
Can I flash a custom kernel over the top of this currently installed ROM (like I did when I flashed the JVT Modem to fix my data connection)?
I have read that the Recovery is stored in the Kernel - So if I flash a different kernel will it replace my CwM 5.0.2.6? (I have noticed there are different colours of CwM Recovery - is this because of the kernel?
Thankyou for any help
Click to expand...
Click to collapse
1. Yes, but before flashing a new kernel flash this script.
2. Correct, but if I'm not mistaken all the major kernels have CWM5 (Platypus Neo 18, FuguMod, Glitch)
Also, you might want to switch to CM nightly #181 instead of 7.1 stable, just a suggestion. 7.1 is quite outdated.

Thankyou very much for the replies, I will flash the nightly tonight using ROM Manager

Problems booting to install Roms

Because some roms are left hanging in the beginning and not booting, my phone is a Huawei U9000 X6, I tested several of the forum but none work properly, now I have Android v2.3.7 and want to do the upgrade to 4.0.
In advance thank you very much.

TheMasterMindGT said:
Because some roms are left hanging in the beginning and not booting, my phone is a Huawei U9000 X6, I tested several of the forum but none work properly, now I have Android v2.3.7 and want to do the upgrade to 4.0.
In advance thank you very much.
Click to expand...
Click to collapse
You gotta remember this ;-
You need kernel 2.6.35.7 for all ICS (Ice Cream Sandwich) Roms
You need kernel 2.6.32.9 for most GB (Ginger Bread) Roms
Android RC3 runs on 2.6.35.7
I think you should flash RC3 via SUT. Flashing RC3 gives you a stable OS and automatically gives you Clockworkmod so you can boot into recovery and flash any ics rom directly after this or any 2.6.35.7 based GB Rom
For some reason though, on neither kernels, this -http://forum.xda-developers.com/showthread.php?t=1619837 boots for me.
The indicator of wrong kernel is Blue screen on bootup

nachiketa.ramesh said:
You gotta remember this ;-
You need kernel 2.6.35.7 for all ICS (Ice Cream Sandwich) Roms
You need kernel 2.6.35.2 for most GB (Ginger Bread) Roms
Android RC3 runs on 2.6.35.7
I think you should flash RC3 via SUT. Flashing RC3 gives you a stable OS andautomatically gives you Clockworkmod so you can boot into recovery and flash any ics rom directly after this or any 2.6.35.7 based GB Rom
For some reason though, on neither kernels, this -http://forum.xda-developers.com/showthread.php?t=1619837 boots for me.
The indicator of wrong kernel is Blue screen on bootup
Click to expand...
Click to collapse
thank you very much for your valuable help, the problem I think is the kernel that I have now:
kernel: 2.6.32.9.
is there any way I can change the current kernel??

TheMasterMindGT said:
thank you very much for your valuable help, the problem I think is the kernel that I have now:
kernel: 2.6.32.9.
is there any way I can change the current kernel??
Click to expand...
Click to collapse
Flashing RC3 automatically gives you the ics kernel.
You can also use CK Kernel 0.4d in dev threads and flash via cwm but it will not work with your current rom

nachiketa.ramesh said:
Flashing RC3 automatically gives you the ics kernel.
You can also use CK Kernel 0.4d in dev threads and flash via cwm but it will not work with your current rom
Click to expand...
Click to collapse
thank you very much by observation I will look for files on the issues.

Here are the links you can refer to
RC3-
http://forum.xda-developers.com/showthread.php?t=1446449
CK Kernel 0.4d
http://forum.xda-developers.com/showthread.php?t=1728461

Help From .35 kernel to .32 kernel possible?
Hi i just wanted to ask since im on .35 kernel and using an ICS based rom CM9/AOKP ROM, how will i be able to go back to .32 kernel any links where i can get it and how to do it? i want to go back to MIUI .2.4.13 by free radical? thanks

endlesone said:
Hi i just wanted to ask since im on .35 kernel and using an ICS based rom CM9/AOKP ROM, how will i be able to go back to .32 kernel any links where i can get it and how to do it? i want to go back to MIUI .2.4.13 by free radical? thanks
Click to expand...
Click to collapse
Possible
Flash RC 1 through SUT LR
then Flash MIUI by FR
enjoy

RC1 from Andro id v3.3 rc1?
vivekb said:
Possible
Flash RC 1 through SUT LR
then Flash MIUI by FR
enjoy
Click to expand...
Click to collapse
by RC 1 you mean FB0G-Andro-ID_V3.3-RC1.7z
thanks

endlesone said:
by RC 1 you mean FB0G-Andro-ID_V3.3-RC1.7z
thanks
Click to expand...
Click to collapse
Yes. That should do the trick.
As an alternative, you can still flash GB stock from your manufacturer (most likely .32 kernel).

=)
k1chy said:
Yes. That should do the trick.
As an alternative, you can still flash GB stock from your manufacturer (most likely .32 kernel).
Click to expand...
Click to collapse
thanks for the reply.

After spending all night struggling with installing the kernel achieves install this ROM but I use the touch screen, anyone know what I can do???
rom is:
http://forum.xda-developers.com/showthread.php?t=1798814

[Q] I need help updating Ultimate JB v5.1 rom to v6 rom. Any1 out there to help?

Right guys heres the info...
Samsung Galaxy Note GT N7000
Rom Version: Ultimate XXLSC ROM
Build number: Ultimate XXLSC JellyBean 4.1.2 v5.1
Kernel Version: 3.0.31 - 593490 [email protected] #3 SMP PREEMPT Tue Nov 27 02:33:05 KST 2012
Now thats out the way let me explain this as clearly as possible.
All i basically want to do is to update my v5.1 to v6.
Well i read through everything and read that I had to be on a safe kernel.
To where my understanding goes I should be doing this:
Going into CWM > wiping the data and stuff > then booting back into CWM using the advanced tab > then installing the new version of the ultimate rom.
I dont need to be flashing philz new version-ed kernel via odin? because the truth is I DNT KNOW HOW TO!! lol
Is that what I should be doing or something else?
Please Help Guys
Appreciate the help Lads.

If your on ultimate ROM already then you should have the kernel that was with the ROM which is safe but your not sure you can flash philz kernel with cwm just download the one for your ROM version in .zip form and flash as normal also with philz kernel you will still have the stock version showing up in your info because his kernel is stock so if your on an custom jb ROM then your kernel is safe just flash as normal another thing is that philz kernel is a touch interface in recovery that is a easy way of knowing if its philz or not but like I said jb and cwm is safe
sent from the the darkness

ttibbetts83 said:
If your on ultimate ROM already then you should have the kernel that was with the ROM which is safe but your not sure you can flash philz kernel with cwm just download the one for your ROM version in .zip form and flash as normal also with philz kernel you will still have the stock version showing up in your info because his kernel is stock so if your on an custom jb ROM then your kernel is safe just flash as normal another thing is that philz kernel is a touch interface in recovery that is a easy way of knowing if its philz or not but like I said jb and cwm is safe
sent from the the darkness
Click to expand...
Click to collapse
Thanks Darkness.. very helpful... Will be flashing the new rom now... Thanks again

[Q] Pre-root stock rom

hi! i was flash this rom from this thread: http://forum.xda-developers.com/showthread.php?t=1992573 but i found the baseband version is different on list is: N7000DXLS8 & on my phone is N7000XXLT3. So if want flash last new philZ kernel which code was choose?

You need to look at the build number of your current rom and flash Philz kernel accordingly.. By the way what rom are you on and is it rooted already?

nokiamodeln91 said:
You need to look at the build number of your current rom and flash Philz kernel accordingly.. By the way what rom are you on and is it rooted already?
Click to expand...
Click to collapse
this:http://forum.xda-developers.com/showthread.php?t=1992573

The build number for that rom is dxlse. Go to Philz thread and check if there is an updated kernel for that.

ok, thanks! I will try flash stock rom & root again. ^^

[Q] I'm very confused :'(

Hi all
I have been trying to find out what the latest version of clockwerkmod is and I would just like someone who knows to inform me if the version given out by rom manager which is 6.0.4.3 is the latest and greatest just so i can make sure it has selinux support as i'm quite new to hacking android.
I have been using the thread on the original development section however could some also inform me as to what "cm only" and "tw only" means as i cant find that on the thread
Thanks

CM only : kernel will only work on cm roms.
TW only : will work only of stock based custom rom.
I think the latest for note as per the cm kernel is 6.0.4.5.

nokiamodeln91 said:
CM only : kernel will only work on cm roms.
TW only : will work only of stock based custom rom.
I think the latest for note as per the cm kernel is 6.0.4.5.
Click to expand...
Click to collapse
Ah, so TW would stand for touchwiz then, ok
Also I've found an update but its not sticking when i flash it. Everytime i reboot, it reverts to an old version...

You cannot flash recovery using rom manager. You will need to change the kernel.