hi! i was flash this rom from this thread: http://forum.xda-developers.com/showthread.php?t=1992573 but i found the baseband version is different on list is: N7000DXLS8 & on my phone is N7000XXLT3. So if want flash last new philZ kernel which code was choose?
You need to look at the build number of your current rom and flash Philz kernel accordingly.. By the way what rom are you on and is it rooted already?
nokiamodeln91 said:
You need to look at the build number of your current rom and flash Philz kernel accordingly.. By the way what rom are you on and is it rooted already?
Click to expand...
Click to collapse
this:http://forum.xda-developers.com/showthread.php?t=1992573
The build number for that rom is dxlse. Go to Philz thread and check if there is an updated kernel for that.
ok, thanks! I will try flash stock rom & root again. ^^
Related
Hi,
I am currently on the leaked gb build 2.3.2 and my build number is XWJV1. I saw that there is no CWM recovery for the current build so how can i install roms like AOKP in my i9000 without CWM?
Thanks
hammadiqbal37 said:
Hi,
I am currently on the leaked gb build 2.3.2 and my build number is XWJV1. I saw that there is no CWM recovery for the current build so how can i install roms like AOKP in my i9000 without CWM?
Thanks
Click to expand...
Click to collapse
I think you would just have to flash a kernel with CWM.
For example, CF Root for JV1, includes:
"CF-Root takes the kernel from an original Samsung firmware, and just adds root, busybox, and (unprotected recovery and CWM compatibility) OR (CWM3)"
I can't post a link because I'm a junior member. Look in the i9000 Development section, search CF Root JV1.
hammadiqbal37 said:
Hi,
I am currently on the leaked gb build 2.3.2 and my build number is XWJV1. I saw that there is no CWM recovery for the current build so how can i install roms like AOKP in my i9000 without CWM?
Thanks
Click to expand...
Click to collapse
Enter Download mode, flash via Odin a firmware (like JVU) that has got a compatible kernel (like semaphore) and you'll' have access to recovery mode, from where you could flash any .zip AOKP rom.
Hi Everyone.
I have backed up my orginal ROM for GT-N7000
android 2.3.6, baseband version N7000XXLA4
Kernel version 2.635.7-N7000XXLA6-CL907341 [email protected]#2
BUILD NO. GINGERBREAD.XXLA6
After backing I rooted my phone by flashing it with Abyss kernel
After flashing my phone. new kernel version is 2.635.14-ver.4.2 [email protected] #3
So please can someone let me know for flashing Sweet ROM V5 XXLRU 4.0.4 do I need to flash new kernel or above kernel will do.
Also let me know do I need to back up now again with this Abyss kernel or should I backup after new ROM? (or earlier backup which I did was the last and final backup)
Please someone help me.
Thanks
flash to abyss kernel then do the wipes and flash rom
McLaren__F1 said:
flash to abyss kernel then do the wipes and flash rom
Click to expand...
Click to collapse
I have already flashed to abyss kernel for rooting ----version 2.635.14-ver.4.2 [email protected] #3
I want to know whether this version will do or else I have to flash another version.
Does 3.0.31-422420 [email protected]#3 is safe kernel to full wipe?
superpaul91 said:
Does 3.0.31-422420 [email protected]#3 is safe kernel to full wipe?
Click to expand...
Click to collapse
No. It is probably the stock one. Go search for PhilZ kernel in original android development thread (assuming that you are on ICS or jb maybe, you didn't tell that). Flash it through stock recovery, then reboot, and after that you are safe to wipe.
Before that go into settings>about phone> and read which rom you have under the build number, if you have problems, just write it here someone will help you
djoni_gitara said:
No. It is probably the stock one. Go search for PhilZ kernel in original android development thread. Flash it through stock recovery, then reboot, and after that you are safe to wipe.
Before that go into settings>about phone> and read which rom you have under the build number, if you have problems, just write it here someone will help you
Click to expand...
Click to collapse
Ultimate N7000_XXLS7 JellyBean 4.1.2 v3
3.0.31 is a JB kernel
3.0.15 was ICS
Its possible that the stock JB kernel is safe but don't take risk.
If you are on ultimate Rom then it already has Philz kernel. To check boot into recovery and you should see Philz CWM
superpaul91 said:
Ultimate N7000_XXLS7 JellyBean 4.1.2 v3
Click to expand...
Click to collapse
Ah. Then you are probably on philz kernel already, boot into recovery, you will see cwm6 recovery which is grey coloured. If it is correct then you are safe to wipe. I think that Ultimate ROM came with philz kernel
Hi everybody, i'm looking for the right Philz kernel to download.
I don't remember what was my kernel code (ex : XXXLRI etc.)
I ve already rooted my Note with Philz (8 or 9 mounths ago) and i am currently using ParanoidAndroid 3.15 from 26 march
I wanted to upgrade my kernel to get the touch philz kernel.
But when i look to my kernel name, in order to find which zip should i download, it's not containing any XXX*** data.
Here is my new code : [email protected] #1
version : N7000XXLRB
Android 4.2.2
I've tried both command on terminal to get them but i can't find any
#getprop and #cat /proc/version
I've flashed the XXXLRI Philz, it worked for a moment but when i flashed PA 3.15, it was like the kernel didnt get update because i dont have the same menu and no touch.
Any help is welcome
Apologies me for my bad english, it's not my native language.
Philz kernel wont work with any rom other than TW roms
nokiamodeln91 said:
Philz kernel wont work with any rom other than TW roms
Click to expand...
Click to collapse
Ok thank you for your answer.
Please, let me ask you one more question. How can i get my kernel code from what i wrote : [email protected] #1
Which command on the terminal can give me more info about it ?
Thank you
Which you the best, Nk54
What kernel code? The example you mentioned in op is the rom name like xxlrt or ddlrb.
nokiamodeln91 said:
What kernel code? The example you mentioned in op is the rom name like xxlrt or ddlrb.
Click to expand...
Click to collapse
version : N7000XXLRB is it this ?
I can't find any information. I tryed cat /proc/version and get just the name of the build.
I tryed to find it by installing a cpuManager, which show me system info, no more information here :/
What does that means ?
Thank you again
1. N7000XXLRB is your Modem/radio
2. ParanoidAndroid 3.15 from 26 march have Cm 10.1 kernel, and you cant use Philz kernel in AOSP roms. Philz kernel supported only in stock based touch wiz roms.
anoopva said:
1. N7000XXLRB is your Modem/radio
2. ParanoidAndroid 3.15 from 26 march have Cm 10.1 kernel, and you cant use Philz kernel in AOSP roms. Philz kernel supported only in stock based touch wiz roms.
Click to expand...
Click to collapse
Ok so i can flash Philz kernel if i want to flash Ultimate ROM which is based on TouchWizz ? Or i shouldnt bother about kernel and flash only the rom ?
Thank you for your helpful answer
you can flash the rom on the CM kernel too.. after flash the kernel will be replaced with kernel included in the rom
Right guys heres the info...
Samsung Galaxy Note GT N7000
Rom Version: Ultimate XXLSC ROM
Build number: Ultimate XXLSC JellyBean 4.1.2 v5.1
Kernel Version: 3.0.31 - 593490 [email protected] #3 SMP PREEMPT Tue Nov 27 02:33:05 KST 2012
Now thats out the way let me explain this as clearly as possible.
All i basically want to do is to update my v5.1 to v6.
Well i read through everything and read that I had to be on a safe kernel.
To where my understanding goes I should be doing this:
Going into CWM > wiping the data and stuff > then booting back into CWM using the advanced tab > then installing the new version of the ultimate rom.
I dont need to be flashing philz new version-ed kernel via odin? because the truth is I DNT KNOW HOW TO!! lol
Is that what I should be doing or something else?
Please Help Guys
Appreciate the help Lads.
If your on ultimate ROM already then you should have the kernel that was with the ROM which is safe but your not sure you can flash philz kernel with cwm just download the one for your ROM version in .zip form and flash as normal also with philz kernel you will still have the stock version showing up in your info because his kernel is stock so if your on an custom jb ROM then your kernel is safe just flash as normal another thing is that philz kernel is a touch interface in recovery that is a easy way of knowing if its philz or not but like I said jb and cwm is safe
sent from the the darkness
ttibbetts83 said:
If your on ultimate ROM already then you should have the kernel that was with the ROM which is safe but your not sure you can flash philz kernel with cwm just download the one for your ROM version in .zip form and flash as normal also with philz kernel you will still have the stock version showing up in your info because his kernel is stock so if your on an custom jb ROM then your kernel is safe just flash as normal another thing is that philz kernel is a touch interface in recovery that is a easy way of knowing if its philz or not but like I said jb and cwm is safe
sent from the the darkness
Click to expand...
Click to collapse
Thanks Darkness.. very helpful... Will be flashing the new rom now... Thanks again