Hi, when I talk to the phone I am unable to turn on the screen, Í press all the buttons and nothing happens,it's very anoyng when I try tu end a call.I have this problem in GB stock rom and in CM 10 to.Any fix?
check your proximity sensor, i.e., disable it and see what happens then
Related
Hi all...
I've seen a problem (i saw same problem on JV1)
When i make a voice call (minutes), and when screen turn to black (no light), and then when voice call is finished, still screen in black (no light), and never lighting again (then i can not to touch to "call end" button, so this is not looking )... only i can acces to screen with press to Home button, after other side closed the connection.
Same as, i can not finalize any call (when screen turn to black) without press to Home button (for turn on the screen)
Did you see this problem ever? or can you tried same things?
Second is, when somebody is call me, i touching to answer button, but connection starting few seconds later... in other words; my first words can not reach to other side in first few seconds..
Anybody have an idea?
Hi every one im new here n its my first post here...
i have Samsung galaxy mini s5570 with emanoN v7, every things works great BUT two days ago when i getup in morning i wake it up by pressing power key. it took 10 seconds to show the screen.. i can recive sms calls etc every thing is working but it wakeup too slow...after pressing power key or home key phone starts working but it do not turn on the screen before 8 to 10 sec... i dont know what happen to it..
Things i already try
clear cache data
reset device
format device
Change the rom emanon 6, cm7 cm10
jump back to stock rom Gingerbread
now im on Emanon7
But problem remains same :crying::crying: HELP ME :crying::crying:
sorry for bad English
seemab said:
Hi every one im new here n its my first post here...
i have Samsung galaxy mini s5570 with emanoN v7, every things works great BUT two days ago when i getup in morning i wake it up by pressing power key. it took 10 seconds to show the screen.. i can recive sms calls etc every thing is working but it wakeup too slow...after pressing power key or home key phone starts working but it do not turn on the screen before 8 to 10 sec... i dont know what happen to it..
Things i already try
clear cache data
reset device
format device
Change the rom emanon 6, cm7 cm10
jump back to stock rom Gingerbread
now im on Emanon7
But problem remains same :crying::crying: HELP ME :crying::crying:
sorry for bad English
Click to expand...
Click to collapse
My SGM earpiece damaged so i oepn up my galaxy n replace my speaker the ear piece come with proximity sensor when i took it out.. i try to turn on without the speakers n proximity sensor my phone works great all my problems solved the problem is in the ribbon cable of ear piece or proximity sensor which cause wake up delay G sensor problems every thing is now fine
I'm currently using cocore 6.2 and Light JB.
I'm very happy and satisfy with the rom but there's one small problem that I've never faced before in any other rom.
When I am surfing the internet, or reading anything, if I didn't touch the screen for 15 seconds, it will turn off itself which is normal.
What I usually do when it turn off I will press the home button immediately and here comes the problem. In any other rom, when I press the home button immediately after the screen automatically turned off, the screen will turn on and back to the screen that i was reading (internet, picture etc.). But while I am using Light JB, when I press the home button, my phone screen will turn on but it will jump back to the homescreen instead of the browser or picture I was reading.
Does anyone face the same problem as me?
I want to know if it's the rom's problem or my rom installation didn't go well.
If it's the rom's problem then I'll just bear with it but if its only me facing this problem I will consider re install the rom.
Thank you very much.
northernhero said:
I'm currently using cocore 6.2 and Light JB.
I'm very happy and satisfy with the rom but there's one small problem that I've never faced before in any other rom.
When I am surfing the internet, or reading anything, if I didn't touch the screen for 15 seconds, it will turn off itself which is normal.
What I usually do when it turn off I will press the home button immediately and here comes the problem. In any other rom, when I press the home button immediately after the screen automatically turned off, the screen will turn on and back to the screen that i was reading (internet, picture etc.). But while I am using Light JB, when I press the home button, my phone screen will turn on but it will jump back to the homescreen instead of the browser or picture I was reading.
Does anyone face the same problem as me?
I want to know if it's the rom's problem or my rom installation didn't go well.
If it's the rom's problem then I'll just bear with it but if its only me facing this problem I will consider re install the rom.
Thank you very much.
Click to expand...
Click to collapse
Stock rom acts the same ... Pressing power button wakes up the device without going to home screen.
tapatalked
rajman said:
Stock rom acts the same ... Pressing power button wakes up the device without going to home screen.
tapatalked
Click to expand...
Click to collapse
yup, stock rom and all other custom rom (jelly mod,chucky,etc) i used do the same
only light jb will back to homescreen
I can't tell if this issue is with the specific ROM I'm using, or if it's just a Lollipop issue in general. During phone calls, the screen goes black (as it should) when I bring the phone to my ear, but now with Lollipop ROMs, most of the time when I pull the phone away, the screen stays black instead of coming back on. Normally, the screen would illuminate when I pull the phone away, but now it doesn't always work correctly. This is particularly annoying at the end of a call when I would normally touch 'end call', but now I have to wait for the caller on the other end to hang up before the screen comes on. Anybody else notice this?
I'm running gruesomewolf's GPE version 1 and I noticed it. I can usually just press the power button and the screen comes back on though.
A workaround
I also have noticed this problem, and i am 100 positive it is a lollipop problem, nothing wrong with the sensor (otherwise the screen wouldn't turn off when it comes close to your ear) nor the ROM (also present in the stock ROM), One solution i found is to set the power button to end the call, this option can be found in Settings>accessibility.
Abdou.rk said:
I also have noticed this problem, and i am 100 positive it is a lollipop problem, nothing wrong with the sensor (otherwise the screen wouldn't turn off when it comes close to your ear) nor the ROM (also present in the stock ROM), One solution i found is to set the power button to end the call, this option can be found in Settings>accessibility.
Click to expand...
Click to collapse
That's a good idea although if you had to use your phone while on a call to look something up or press the keypad, pressing power to turn on the screen will also hang up the call. But, if you never have that issue, your workaround is :good:
One more solution
coal686 said:
That's a good idea although if you had to use your phone while on a call to look something up or press the keypad, pressing power to turn on the screen will also hang up the call. But, if you never have that issue, your workaround is :good:
Click to expand...
Click to collapse
You can also enable DoubleTap2Wake by using a custom kernel.
Same problem on TMo m7
Last week I upgraded to Android 5.0.2 on my TMo HTC One m7.
Since then when I remove the device from next to my head during a phone call the screen stays black.
This means I cannot use a keypad to navigate a phone menu or to enter a PIN.
I can tap the power button to re-awaken the screen but it takes several seconds to come back - and sometimes stays dark.
This is a mild nuisance if simply trying to end a call but is a major issue if I'm trying to use an IVR (this device is, after all, a PHONE!)
I have run the HTC Function test on the phone and the P-Sensor test runs fine.
My screen isnt waking up when i press unlock/home button
when i turning on my s3 i9305 its working normally, but when i block it i cant unblock :/
i hear voices, buttons are highlighted, but screen is black
i tried to change ROM, before it was at a stock rom, i tried to install stock again but same problem
after that i installed cm 12 and still the same problem
how can i fix it? :/
and i will say again, the screen is working perfectly when im turning on phone
Hyperlast said:
My screen isnt waking up when i press unlock/home button
when i turning on my s3 i9305 its working normally, but when i block it i cant unblock :/
i hear voices, buttons are highlighted, but screen is black
i tried to change ROM, before it was at a stock rom, i tried to install stock again but same problem
after that i installed cm 12 and still the same problem
how can i fix it? :/
and i will say again, the screen is working perfectly when im turning on phone
Click to expand...
Click to collapse
And those buttons are working normally when you turn on your phone (and the screen is on, too)? Can you go to home with home button or lock the device with power buttton?
Maybe just a hardware issue?
buttons
when i power on phone i can use every button normally until i block it :/
This sounds like really random issue, may be a hardware one. If reflashing stock rom trough odin didn't help, then you probably should give your phone to service