Related
I can't install any custom rom on my x8. I instal it with xRecovery or CWM, do full wipe, rebot, and then stucks at "sony ersicsson" logo!
i have do that for 5 or 6 times whit different roomx..stucks at sony logo. I restore it at 2.1 whit seus. Every time when i try..it fail!
Any help..please!
Sory for bad english
Flash your phone with seus,pc companion or flashtool.I always flash my phone with seus
tujamo1 said:
I can't install any custom rom on my x8. I instal it with xRecovery or CWM, do full wipe, rebot, and then stucks at "sony ersicsson" logo!
Any help..please!
Sory for bad english
Click to expand...
Click to collapse
which ROm are you trying to install? Please provide more info on your problem, so we could help you better
tujamo1 said:
I can't install any custom rom on my x8. I instal it with xRecovery or CWM, do full wipe, rebot, and then stucks at "sony ersicsson" logo!
Any help..please!
Sory for bad english
Click to expand...
Click to collapse
There are some problem that causes custom rom cannot boot. I will state the problem but, you gonna go search it for yourself.
1.Busybox not correctly installed
2.Root incorrectly
3.Baseband incompatible
4.Rom need custom kernel to work (Extra care.)
tujamo1 said:
I can't install any custom rom on my x8. I instal it with xRecovery or CWM, do full wipe, rebot, and then stucks at "sony ersicsson" logo!
Any help..please!
Sory for bad english
Click to expand...
Click to collapse
Im guessing your coming from stock ,, so heres what you gotta do
if you bought the cell recently you don't need tio update your baseband,,
anyways heres what you must do
1. Root your phone
2.install xrecovery /Cwm
3.Move your desired rom to you memory cards,, not on any folder directly on the card
4. reboot and open xrecovery/Cwm(whichever the rom requires)
5.Data reset
6.Flash rom
anyways some roms require custom kernels in that case learn howto unlock your bootloader and flash the required custom kernel
and your good to go
Hit the thanks button if i helped
AbirXtreme said:
Im guessing your coming from stock ,, so heres what you gotta do
if you bought the cell recently you don't need tio update your baseband,,
anyways heres what you must do
1. Root your phone
2.install xrecovery /Cwm
3.Move your desired rom to you memory cards,, not on any folder directly on the card
4. reboot and open xrecovery/Cwm(whichever the rom requires)
5.Data reset
6.Flash rom
anyways some roms require custom kernels in that case learn howto unlock your bootloader and flash the required custom kernel
and your good to go
Hit the thanks button if i helped
Click to expand...
Click to collapse
Also THE MAIN ONE make sure usb debugging is enabled
I do that all the time when i trying..
I do this for some times..5 or 6..whit different rooms. all the time stucks at sony logo and i can't enter in xRec or CWM..i restore it whit seus
przemek4113 said:
Flash your phone with seus,pc companion or flashtool.I always flash my phone with seus
Click to expand...
Click to collapse
I do that all the time when i trying..
AbirXtreme said:
Im guessing your coming from stock ,, so heres what you gotta do
if you bought the cell recently you don't need tio update your baseband,,
anyways heres what you must do
1. Root your phone
2.install xrecovery /Cwm
3.Move your desired rom to you memory cards,, not on any folder directly on the card
4. reboot and open xrecovery/Cwm(whichever the rom requires)
5.Data reset
6.Flash rom
anyways some roms require custom kernels in that case learn howto unlock your bootloader and flash the required custom kernel
and your good to go
Hit the thanks button if i helped
Click to expand...
Click to collapse
I do that..for 5 or 6 times..it fails!
tujamo1 said:
I do that..for 5 or 6 times..it fails!
Click to expand...
Click to collapse
-use flashtool
Okay now,
-root your phone(turn on usb debugging. don't remove usb yet)
-install busybox (don't remove usb yet)
-reboot your phone, if flash tool on PC showing busybox version : XXX XXX or whatever you are good to go if not, redo, (Problem in flashtool, driver or usb debugging not turned on)
-install xRecovery
-continue on Post by AbirXtreme ~
Note: when busybox showing version, there's is no need to use seus to go back again. you may just pull out the battery(with usb unplugged), wait for 10 sec and turn on again. Experiment with installing xRecovery on phone boot-up and try again without using seus... and if you stuck on the sony ericsson logo, wait... then try lock your screen. if screen can be locked (turn dark) mean that your root+busybox are good but xRecovery are not, just try many times to get to it.... and if all those above is not working... search other dev or thread
---------- Post added at 11:47 AM ---------- Previous post was at 11:40 AM ----------
tujamo1 said:
I can't install any custom rom on my x8. I instal it with xRecovery or CWM, do full wipe, rebot, and then stucks at "sony ersicsson" logo!
i have do that for 5 or 6 times whit different roomx..stucks at sony logo. I restore it at 2.1 whit seus. Every time when i try..it fail!
Any help..please!
Sory for bad english
Click to expand...
Click to collapse
ah, sorry to my previous post.... i wasn't read it carefully....
now that you can enter xRecovery/Cwm is good
now what you need is,
1. check the rom post for more info, if it says for custom kernel/alfs kernel/nAa kernel. Sorry you can't use this as your rom.(unlocking your bootloader will fix this issue. WARNING:It's dangerous, search )
2. Try flash my Fix for stock kernel and Fix for low performance at my post in dev section
3. Try full-wipe in every rom if you still have this problem
4. Cannot help your further
A little stupid hint...
Are you sure you are stuck at se logo? I mean, have you wait enough? Sometimes it gets up to 5 min to start and especially first time...
Sent from my E15i using xda premium
I think I understand you problem here
I think I understand your problem here.
Do not Full wipe after installing ROM
Always full wipe before installing, not after....I hope this helps
Change Your Baseband! if Your Baseband finish in .......06
you need change it to ............15
Check your baseband in Settings/about phone
I Haved This problem and I Solve it Changing My Baseband! xD
so as mine can any one know how to upgrade 11W42
it is probably the fact you need custom kernel. But before trying to unlock bootloader, turn phone off,, take back cover and battery off and check your phones date ie
10w56 or 11w34 etc
Sent from my X8 using XDA App
sambavadekar said:
I think I understand your problem here.
Do not Full wipe after installing ROM
Always full wipe before installing, not after....I hope this helps
Click to expand...
Click to collapse
Not in some cases. Some DEVS put when to do full wipe. So it depends on what the installation instructions are
Sent from my X8 using XDA App
CKKnot said:
-use flashtool
Okay now,
-root your phone(turn on usb debugging. don't remove usb yet)
-install busybox (don't remove usb yet)
-reboot your phone, if flash tool on PC showing busybox version : XXX XXX or whatever you are good to go if not, redo, (Problem in flashtool, driver or usb debugging not turned on)
-install xRecovery
-continue on Post by AbirXtreme ~
Note: when busybox showing version, there's is no need to use seus to go back again. you may just pull out the battery(with usb unplugged), wait for 10 sec and turn on again. Experiment with installing xRecovery on phone boot-up and try again without using seus... and if you stuck on the sony ericsson logo, wait... then try lock your screen. if screen can be locked (turn dark) mean that your root+busybox are good but xRecovery are not, just try many times to get to it.... and if all those above is not working... search other dev or thread
---------- Post added at 11:47 AM ---------- Previous post was at 11:40 AM ----------
ah, sorry to my previous post.... i wasn't read it carefully....
now that you can enter xRecovery/Cwm is good
now what you need is,
1. check the rom post for more info, if it says for custom kernel/alfs kernel/nAa kernel. Sorry you can't use this as your rom.(unlocking your bootloader will fix this issue. WARNING:It's dangerous, search )
2. Try flash my Fix for stock kernel and Fix for low performance at my post in dev section
3. Try full-wipe in every rom if you still have this problem
4. Cannot help your further
Click to expand...
Click to collapse
Thant's man. It work!
wilbso said:
Not in some cases. Some DEVS put when to do full wipe. So it depends on what the installation instructions are
Sent from my X8 using XDA App
Click to expand...
Click to collapse
I'm do this all the time when i flash a new rom. But a had make my phone work. Thanks anyway!
samu1player said:
Change Your Baseband! if Your Baseband finish in .......06
you need change it to ............15
Check your baseband in Settings/about phone
I Haved This problem and I Solve it Changing My Baseband! xD
Click to expand...
Click to collapse
My baseband ends with .......15
After installing MiniCM7 and it's custom kernel I can't add most of the widgets I download via market. Out of 20 widgets only 1 shows up in widget list.
Is there any way to fix this or am I the only one who has come across this problem?
You moved the widgets to SD card?
This mail was delivered to you using Tapatalk!!
Oh thanks, my apps install default to SD since X8-s internal memory is so small.
kerts93 said:
Oh thanks, my apps install default to SD since X8-s internal memory is so small.
Click to expand...
Click to collapse
The best way I've found to free up memory taken by installed apps was to created a sd-ext partition. To easily create a sd-ext partition follow these instructions:
NOTE THAT THIS WILL ERASE ALL DATA ON ALL PARTITIONS ON THE SD CARD - BACKUP THE SD CARD BEFORE DOING THIS IF YOU WANT TO KEEP YOUR DATA
1. Reboot into recovery mode
2. Select the "advanced" option
3. Select the "Partition SD Card" option
4. You can now set the "Ext Size" for the sd-ext - I use "2048M" which works fine although if you have loads of free space you can select "4096M"
5. Next you'll see a "Swap Size" - After some research I found a swap drive isn't needed and will not really speed anything up (I am not using a swap drive but you may create one if you like - THIS WILL REDUCE THE LIFE OF YOUR SD CARD!)
6. Click next/OK until it starts the partition process - This will now create the sd-ext partition.
Once done I reccomend to clear all data (under mounts and storage, select format /system, format /data, format /cache). Then Come back out to main option list, select "wipe cache partition" and finally "wipe data/factory reset" as if you wer're flashing a new ROM).
Flash ROM and gapps-xxx - Reboot and enjoy!
Hope this helps!
NOTE:
If you decide to change ROMs in future, make sure you select "format /sd-ext" as part of the "clear all data" process.
problem with xperia x8
recently i rooted my xperia x8 and installed xrecovery.
all was working fine.
made a backup of my eclair 2.1
i then without proper knowledge installed miniCM7-2.1.9
without unlocking bootlogger and flashing kernel
now when i boot my phone, it shows just "SONY ERICSSION(white)"'
i cant even go to the recovery mode by pressing back key also to the clockwork mode recovery.
I am in desperate need of help.
Please help me...
thanks in advance.
rjravivarma said:
recently i rooted my xperia x8 and installed xrecovery.
all was working fine.
made a backup of my eclair 2.1
i then without proper knowledge installed miniCM7-2.1.9
without unlocking bootlogger and flashing kernel
now when i boot my phone, it shows just "SONY ERICSSION(white)"'
i cant even go to the recovery mode by pressing back key also to the clockwork mode recovery.
I am in desperate need of help.
Please help me...
thanks in advance.
Click to expand...
Click to collapse
You've encountered a brick. Now what you should do this is
Open PCC
DO NOT CONNECT YOUR PHONE YET
Under "Support Zone" , click on Start
Opt for "Phone Update Software" and click "Start"
It will complain that no phone is connected.
There'll be a "Repair Phone" option. Click that.
Just follow the steps in PCC. It will tell you how to connect your phone. Update , and in no time you'll get back to Stock ROM.
Re-root. Flash CWM
Mayank77 said:
You've encountered a brick. Now what you should do this is
Open PCC
DO NOT CONNECT YOUR PHONE YET
Under "Support Zone" , click on Start
Opt for "Phone Update Software" and click "Start"
It will complain that no phone is connected.
There'll be a "Repair Phone" option. Click that.
Just follow the steps in PCC. It will tell you how to connect your phone. Update , and in no time you'll get back to Stock ROM.
Re-root. Flash CWM
Click to expand...
Click to collapse
Hi i also encounted a brick but what happend wrong??
Sorry for bad english
TemplexZ said:
Hi i also encounted a brick but what happend wrong??
Sorry for bad english
Click to expand...
Click to collapse
What did you do before bricking your phone? And what happens when you try to boot up?
Sent from my X8 using xda premium
cascabel said:
What did you do before bricking your phone? And what happens when you try to boot up?
Sent from my X8 using xda premium
Click to expand...
Click to collapse
Hi i unlocked bootload and flashed my kernel nAa and flashed minicm7 for x10 mini pro and when i boot my kernel logo shows up and it shutdown again and try to boot again!
Very strange!
rjravivarma said:
recently i rooted my xperia x8 and installed xrecovery.
all was working fine.
made a backup of my eclair 2.1
i then without proper knowledge installed miniCM7-2.1.9
without unlocking bootlogger and flashing kernel
now when i boot my phone, it shows just "SONY ERICSSION(white)"'
i cant even go to the recovery mode by pressing back key also to the clockwork mode recovery.
I am in desperate need of help.
Please help me...
thanks in advance.
Click to expand...
Click to collapse
okay!
This is for the last option! if didn't work to repair it using PC companion or SEUS
1. download X8 E15i 2.1.1.C.0.0._un.ftf from file crop and you willl get your phone on 2.1
2. its better if you backup your data when in 2.1 you so can restore it OR backup from xrecovery
3. make sure if your baseband is 015 and phone type is not 11w29+ !!!
4. root your phone by clicking padlock icon in the Flashtool!
5. install xrecovery with flashtool by clicking the cross icon
6. unlock bootloader using s1tool
7. flash the latest kernel
8. backup
9. factory reset, wipe data, etc
10. Flash ROM
DOne!
Just make sure that the Widgets were not installed on SD card
Sent from my E15i using xda premium
I am really sorry about many this kinds of post
I can't open my X8
It stuck of as long as I open my phone I really need your help
I have used SEUE PCC flashtool !!!
ALL are no use
SEUE said it is the newest ,no need to update
PCC said no software for you = =
I am really need YOUR HEPL
Flash stock rom,stock kernel manually.
Sent from my X8 using xda premium
try with this http://forum.xda-developers.com/showthread.php?p=12442257#post12442257
ocean1998 said:
I am really sorry about many this kinds of post
I can't open my X8
It stuck of as long as I open my phone I really need your help
I have used SEUE PCC flashtool !!!
ALL are no use
SEUE said it is the newest ,no need to update
PCC said no software for you = =
I am really need YOUR HEPL
Click to expand...
Click to collapse
u used flash tool and it dint help ???? are u sure about it!! does your phone vibrate when u turn it on or not?
Bruno; ryedrt
manishmalhotra said:
u used flash tool and it dint help ???? are u sure about it!! does your phone vibrate when u turn it on or not?
Click to expand...
Click to collapse
yes it vibrate when i turn it on and then it shows sony ericsson and turn a bit grey and stuck as long as i open my X8= =
if you tell us what is cause this soft brick maybe we can tell you more specific what to do! did you try press repair button on PCC?
damir87 said:
if you tell us what is cause this soft brick maybe we can tell you more specific what to do! did you try press repair button on PCC?
Click to expand...
Click to collapse
It said that no software of my device (X8) on PCC when i press repair button on PCC and can't repair by PCC
how to do with my x8
damir87 said:
if you tell us what is cause this soft brick maybe we can tell you more specific what to do! did you try press repair button on PCC?
Click to expand...
Click to collapse
It said that no software for my device (X8) on PCC when i press repair button on PCC and can't repair by PCC
there is no software available for your phone please try again later
ocean1998 said:
It said that no software for my device (X8) on PCC when i press repair button on PCC and can't repair by PCC
Click to expand...
Click to collapse
What Damir mean is:
what are you doing b4 its stuck
1.install costum rom?
2.flash zip files via xrecovery/CWM?
3.Just reboot and its suddenly stuck?
zmuhammx said:
What Damir mean is:
what are you doing b4 its stuck
1.install costum rom?
2.flash zip files via xrecovery/CWM?
3.Just reboot and its suddenly stuck?
Click to expand...
Click to collapse
2.flash zip files in xrecovery
from 2.1 up to 2.3.7
ocean1998 said:
2.flash zip files in xrecovery
from 2.1 up to 2.3.7
Click to expand...
Click to collapse
now that explain everything... you are probably flash rom witch is not compatible with stock kernel! if you can access xrecovery flash gingerdx v13, then you will get cwm recovery preinstalled in rom, then from cwm flash latest version of gingerdx! both version you can find here:
GingerDX v13
Latest GingerDX
always soft brick when restoring backup
why do i always have a soft brick issue when i restore my backup.
always stuck on SE logo... i encounter it twice
___________________
ROM- Gingerdx v28b
kernel- Stock
bootloader- locked ( 11w34)
jonathan07 said:
why do i always have a soft brick issue when i restore my backup.
always stuck on SE logo... i encounter it twice
___________________
ROM- Gingerdx v28b
kernel- Stock
bootloader- locked ( 11w34)
Click to expand...
Click to collapse
yeah
if you're backing up from old system and restore in a new system (ROM) you can got brick OR from new system to old system
so after flashing Kernel, you must backup first
factory reset
wipe battery stats , etc
finally flash ROM
then I think you can restore your data..
Flashtool helps when seus or pc companion does not... just select the firmware for your device and flash it. it always work.
Heres the gudie to use flsh tool.. download stock rom. Ftf file and..
http://forum.xda-developers.com/showthread.php?t=1755215
Sent by the walking walkman..
okay!
This is for the last option! if didn't work to repair it using PC companion or SEUS
1. download X8 E15i 2.1.1.C.0.0._un.ftf from file crop and you willl get your phone on 2.1
2. install your flashtool
3. make sure if your baseband is 015 !
4. root your phone by clicking padlock icon in the Flashtool!
5. install xrecovery with flashtool by clicking the cross icon
6. unlock bootloader using s1tool and make sure if your phone type is not 11w29+ !!
7. flash the latest kernel
8. backup
9. factory reset, wipe data, etc
10. Flash ROM
DOne!
BlackRabbit1703 said:
okay!
This is for the last option! if didn't work to repair it using PC companion or SEUS
1. download X8 E15i 2.1.1.C.0.0._un.ftf from file crop and you willl get your phone on 2.1
2. install your flashtool
3. make sure if your baseband is 015 !
4. root your phone by clicking padlock icon in the Flashtool!
5. install xrecovery with flashtool by clicking the cross icon
6. unlock bootloader using s1tool and make sure if your phone type is not 11w29+ !!
7. flash the latest kernel
8. backup
9. factory reset, wipe data, etc
10. Flash ROM
DOne!
Click to expand...
Click to collapse
I've seen this post before from u
Looks like sth universal & God-mod
Is it important how did i send this?
faraz_fireboy said:
I've seen this post before from u
Looks like sth universal & God-mod
Is it important how did i send this?
Click to expand...
Click to collapse
ow really??
hahaha...lolZ
yep yep yep :laugh::laugh::laugh:
Use flashtool...it will work
Sent from my E15i using Tapatalk 2
i just install mini cam7 to my x8, after i reboot my phone it stuck in sony ericsson logo. they any solution for this problem????
By mini cam7 you mean MiniCM7?
If you see Sony Ericsson logo, it means that you are on stock kernel. MiniCM7 is for nAa kernel.
Solution - click
Solution?
Here you go- http://forum.xda-developers.com/showthread.php?t=1771338
sandung said:
i just install mini cam7 to my x8, after i reboot my phone it stuck in sony ericsson logo. they any solution for this problem????
Click to expand...
Click to collapse
You can use Flashtool to flash a stock ROM and act like nothing happened..
If you can still go to cwm by pressing back button while boot then you can get a rom that works on stock kernel on to your sd card and flash it or if u have back up then just reatore it..
Or
If u can't go to cwm then flash stock rom .Ftf file available in our development section and flash it..
Heres a guide to flashing
http://forum.xda-developers.com/showthread.php?t=1755215 http://forum.xda-developers.com/showthread.php?t=1755215
Sent by the walking walkman..
sidhart said:
If you can still go to cwm by pressing back button while boot then you can get a rom that works on stock kernel on to your sd card and flash it or if u have back up then just reatore it..
Or
If u can't go to cwm then flash stock rom .Ftf file available in our development section and flash it..
Heres a guide to flashing
http://forum.xda-developers.com/showthread.php?t=1755215 http://forum.xda-developers.com/showthread.php?t=1755215
Sent by the walking walkman..
Click to expand...
Click to collapse
No 1
Sent from my E15i using xda premium
okay!
This is for the last option! if didn't work to repair it using PC companion or SEUS
1. download X8 E15i 2.1.1.C.0.0._un.ftf from file crop and you willl get your phone on 2.1
2. install your flashtool
3. make sure if your baseband is 015 !
4. root your phone by clicking padlock icon in the Flashtool!
5. install xrecovery with flashtool by clicking the cross icon
6. unlock bootloader using s1tool and make sure if your phone type is not 11w29+ !!
http://forum.xda-developers.com/showthread.php?t=1254225
7. flash the latest kernel
8. backup
9. factory reset, wipe data, etc
10. Flash ROM
DOne!
BlackRabbit1703 said:
okay!
This is for the last option! if didn't work to repair it using PC companion or SEUS
1. download X8 E15i 2.1.1.C.0.0._un.ftf from file crop and you willl get your phone on 2.1
2. install your flashtool
3. make sure if your baseband is 015 !
4. root your phone by clicking padlock icon in the Flashtool!
5. install xrecovery with flashtool by clicking the cross icon
6. unlock bootloader using s1tool and make sure if your phone type is not 11w29+ !!
http://forum.xda-developers.com/showthread.php?t=1254225
7. flash the latest kernel
8. backup
9. factory reset, wipe data, etc
10. Flash ROM
DOne!
Click to expand...
Click to collapse
how many times have i see this post?!
this is spam and it is against the rules, at your post there is a number at the up , right corner, if you click at it you can see just your post, copy url and post it instaid of copy paste your post one hundrent times!!!!
really, i am geting bored of seeing this post everywhere
stamatis16 said:
how many times have i see this post?!
this is spam and it is against the rules, at your post there is a number at the up , right corner, if you click at it you can see just your post, copy url and post it instaid of copy paste your post one hundrent times!!!!
really, i am geting bored of seeing this post everywhere
Click to expand...
Click to collapse
what????
really dude?!
I made it by my self
just typing on my own keyboard
okay okay...
in the future I'll not doing spam again as you tell like that dude,,
thx! :laugh::laugh:
the easiest way to get back ur phone is using PCC.
Select "repair phone" and ur X8 will be back to stock
Greetings from Colombia. The post I translated with Google translator because not speak English. Hope is not a big problem and I hope I helped. Thanks again.
My problem is this. I have an Xperia X8 (E15i - 11w13) and a few days ago I returned my Xperia X8 to PC COMPANION Stock (Stock Firmware and Kernel) Then using the ROM: rDroid (The best ROM for me)
With my phone in stock. Decides to Flashing ...
+ Then I ROOT my phone with flashtool. All good up there.
+ I decided to install the xRecovery as always and installed (Copying 3 files to System / Bin with RootExplorer)
Restart .. And no, it did not work.
- Investigate and maybe he problem was the permissions. I repeated the process, modify permissions ... And no, it did not work
- Maybe it was the Busybox?. I repeated the process after installing Busybox from the Android Market ... And nothing
- So I thought ... and it decided to install the xRecovery Flashtool, I did and .. It worked!
Already with the xRecovery working and the new ROM on SD Card, decided Flashing.
+ Realize what Wipes and install the ROM ... There all good
+But when the cell lit New ROM test, shoot me Restarts every 10min, with a message in the notification bar that says: "It is safe to remove the SD"
+Or failed the internet or in the Market / Play Store (would not let me download any APP)
+Or And there did not return to take the ROM .. It was stuck on the logo of SONY
+Or And Not even let me enter the xRecovery
Then I play do ... TOTAL STOCK Back to PC Companion.
I returned to Perform ROOT process, Xrecovery (with Flashtool) ... All to Flash the ROM withthe rDroid Cel (The one I was using before the problem and it works excellent)
But what ... Again the same problem. The constant pulling reboot message "Safe to remove the SD"
So when I went back to try to get the xRecovery .. He returned and stayed stuck in the Logo of SE.
And I got to re-do?... Make PC STOCK TOTAL COMPANION :crying:
¡HELP ME!
hi. i understand that you don't speak english, and thanks for the effort in using translate, but i'm afraid i'm not sure i understand. are you experiencing a soft brick now? or is the sdcard error the issue?
if you have a soft brick (stuck in sony logo), try using seus instead of pcc if pcc doesn't work.
if you're experiencing the sdcard issue, backup your sdcard and reformat it. also, install cwm instead of xrecovery as some roms apparently do not support xrecov (i have not experienced it though).
also, are you on stock kernel? i'm not familiar with the rom you're using. or is your bootloader unlocked and you have a custom kernel? and what is the new rom you're trying to use?
Just because i don't doesn't mean i can't.
Just helping
if u want to fix the booloop (stuck at sony logo)
just flash the original firmware by flash tool
download here
and if u want to install custom rom
- Flash the kernel
- Full Wipe (dalvik cache and batery stats)
- Factory Reset
- Install ROM
cascabel said:
hi. i understand that you don't speak english, and thanks for the effort in using translate, but i'm afraid i'm not sure i understand. are you experiencing a soft brick now? or is the sdcard error the issue?
if you have a soft brick (stuck in sony logo), try using seus instead of pcc if pcc doesn't work.
if you're experiencing the sdcard issue, backup your sdcard and reformat it. also, install cwm instead of xrecovery as some roms apparently do not support xrecov (i have not experienced it though).
also, are you on stock kernel? i'm not familiar with the rom you're using. or is your bootloader unlocked and you have a custom kernel? and what is the new rom you're trying to use?
Just because i don't doesn't mean i can't.
Click to expand...
Click to collapse
Hello. Thanks for answering Cascabel.
But I had no brick problem, or soft or hard.
The phone works normally with the Stock ROM, but with a Custom ROM works but has problems (the same problem throughout the ROM I try)
Buy a New SD card (8GB Kingston) to see if the problem was on the sd card. And it still has the same problem with the new card
DanielCuellarP said:
Hello. Thanks for answering Cascabel.
But I had no brick problem, or soft or hard.
The phone works normally with the Stock ROM, but with a Custom ROM works but has problems (the same problem throughout the ROM I try)
Buy a New SD card (8GB Kingston) to see if the problem was on the sd card. And it still has the same problem with the new card
Click to expand...
Click to collapse
Are you getting that problem on stock rom (2.1) ?
WrongType said:
Are you getting that problem on stock rom (2.1) ?
Click to expand...
Click to collapse
No. With STOCK ROM works perfectly, without any fail.
DanielCuellarP said:
No. With STOCK ROM works perfectly, without any fail.
Click to expand...
Click to collapse
what ROM did you use? "Safe to remove SD" was a known bug in early days of Froyo/GB.
-HuntDX- said:
what ROM did you use? "Safe to remove SD" was a known bug in early days of Froyo/GB.
Click to expand...
Click to collapse
Good news, for now...
Thanks for your answers. Yesterday test a ROM (Xperia SOUL Engine Generation4) And so far not filed failures..
The problem of "Safe to remove SD" I had in GB (ROM android 2.3.5)
+I have to test what the Xrecovery. See if I work or if I presented another problem (When using xRecovery, pressing the back key and the phone would not start and it stuck in the logo of Sony Ericsson)
DanielCuellarP said:
Good news, for now...
Thanks for your answers. Yesterday test a ROM (Xperia SOUL Engine Generation4) And so far not filed failures..
The problem of "Safe to remove SD" I had in GB (ROM android 2.3.5)
+I have to test what the Xrecovery. See if I work or if I presented another problem (When using xRecovery, pressing the back key and the phone would not start and it stuck in the logo of Sony Ericsson)
Click to expand...
Click to collapse
You don't test or mess xrecovery if you are in custom rom. You'll soft brick even you can boot up to xrecovery and xrec uses amend scripting so CWM in custom rom is the best. Xrec uses busybox and all custom rom can't update busybox.
Sent from my GT-S5360 using Tapatalk 2
Just use CWM
Sent from my E15i using xda app-developers app