Database Develop

[Q] v20l vs v20m

Hi
I've got the v20l installed on my device.I was thinking, which are the differences between v20l and v20m? Any bug fixed? It would be convenient for me to update the phone?
Thanks
Best regards
Stefano

scompiani said:
Hi
I've got the v20l installed on my device.I was thinking, which are the differences between v20l and v20m? Any bug fixed? It would be convenient for me to update the phone?
Thanks
Best regards
Stefano
Click to expand...
Click to collapse
- V20m is better v20l, baseband same v20l,
- RAM manager is better v20l, your phone is not slowly after a long time
- Free RAM at first boot is more 160MB

bactuong said:
- V20m is better v20l, baseband same v20l,
- RAM manager is better v20l, your phone is not slowly after a long time
- Free RAM at first boot is more 160MB
Click to expand...
Click to collapse
V20m Ram management is better than V20l. V20m is a bit faster.
But the leaked V20o is the best stock GB firmware.

Flix123 said:
V20m Ram management is better than V20l. V20m is a bit faster.
But the leaked V20o is the best stock GB firmware.
Click to expand...
Click to collapse
At the end I've installed the v20o and now the mobile runs as a rocket! Just a curiosity, do you advice me to install Horsepower kernel too? And what about Gps FIX?

scompiani said:
At the end I've installed the v20o and now the mobile runs as a rocket! Just a curiosity, do you advice me to install Horsepower kernel too? And what about Gps FIX?
Click to expand...
Click to collapse
In V20o, you don't need a GPS Fix anymore.
I recommend the Horsepower SR2 Kernel and Performance Pack V9. You have to install it in Clockworkmod with install zip from sdcard.

Flix123 said:
In V20o, you don't need a GPS Fix anymore.
I recommend the Horsepower SR2 Kernel and Performance Pack V9. You have to install it in Clockworkmod with install zip from sdcard.
Click to expand...
Click to collapse
WHAT BASEBAND AND RIL IS PREFFERED????

THAT DEPENDS WHERE YOU LIVE, IF YOU DECIDE TO FLASH BB ONCE YOURE RISKING SEARCHING AND FLASHING TILL YOUR NEEDS ARE SATISFIED. SOME CUSTOM ROMS RECOMMEND CERTAIN BB, BUT STILL IT HAS TO MATCH YOUR HOME LOCATION WITH RIL OF YOUR CHOICE. CAN WE AGREE THAT THIS IS SOLVED?
BEST WISHES
SuperSkill ;-)
Sent from my LG-P990 using xda premium

It isn't complicated.
Just flash V20m baseband and the V20o. The correct ril is integrated in the rom.

where i get the V20o? can you post a link?

Why don't you search by yourself? There's only two clicks between this thread and what your want .

sganach said:
where i get the V20o? can you post a link?
Click to expand...
Click to collapse
Just for you: LINK!!!

Thank you Flix, i followed your advice installing HP RC11-R Kernel and Performance pack V10, disabling scrolling cache and lagging and now my device runs faster and faster!
Before doing it, i was attempting to install your All in One Tweaks pack but after the mobile didn't boot, so i had to run backtoext3 and re-install every package. Any suggestion? The package converts sd to ext4? Performance Pack V10, i noticed contains same ext4 tweaks, works without any problem.
P.S. I tried to modify the battery display with a package made by me on Uot Kitchen but i cannot install it, CWM finds an error and aborts the procedure. How did you do it?

scompiani if you accept a suggestion try the thanatos rom
before i was on the leaked v20o and now with this rom is another world belive me!
soon will be released the 5.2 with the new kernel version and new tweaks and optimizations

alakyr said:
scompiani if you accept a suggestion try the thanatos rom
before i was on the leaked v20o and now with this rom is another world belive me!
soon will be released the 5.2 with the new kernel version and new tweaks and optimizations
Click to expand...
Click to collapse
I tried the one based on v20l and i didn't like it very much, maybe i'll try soon this new version, as you suggest me thanks
actually i have hp extreme kernel and my device goes very fast

the differences are so small, i don't think you would even notice them

Agree V20o is the best Room

Hello guys.
Any idea when this V20o will be available from LG?

Some Problems with my Speed?!

Hello Mates,
I have the newest miui rom, swift extreme 1,2 kernel and 725 baseband on my
optimus speed. But still have some problems:
1) youtube doesnt work
2) battery dont charge when switched off
3) sometimes phone get very hot and have black screen and dont react.
Have to move battery and restart.
Hope you guys can help me fix this problems.
Or any other kernel recommondation with a linm?
Thanks alot
Best Regardy

wrong section, there is sth not good about Your phone, try stock miui kernel or ironkernel instead

fuxmen said:
wrong section, there is sth not good about Your phone, try stock miui kernel or ironkernel instead
Click to expand...
Click to collapse
Hello,
Do you knkw where i can download the newest stock kernel?
Link?
Thank you

install latest CM7.2.0 + ironkernel.
and you're good to go.

i work on wajkiui and iron kernel and its work like hell try it or like miina_tokiha sad try cm 7.2

Problems booting to install Roms

Because some roms are left hanging in the beginning and not booting, my phone is a Huawei U9000 X6, I tested several of the forum but none work properly, now I have Android v2.3.7 and want to do the upgrade to 4.0.
In advance thank you very much.

TheMasterMindGT said:
Because some roms are left hanging in the beginning and not booting, my phone is a Huawei U9000 X6, I tested several of the forum but none work properly, now I have Android v2.3.7 and want to do the upgrade to 4.0.
In advance thank you very much.
Click to expand...
Click to collapse
You gotta remember this ;-
You need kernel 2.6.35.7 for all ICS (Ice Cream Sandwich) Roms
You need kernel 2.6.32.9 for most GB (Ginger Bread) Roms
Android RC3 runs on 2.6.35.7
I think you should flash RC3 via SUT. Flashing RC3 gives you a stable OS and automatically gives you Clockworkmod so you can boot into recovery and flash any ics rom directly after this or any 2.6.35.7 based GB Rom
For some reason though, on neither kernels, this -http://forum.xda-developers.com/showthread.php?t=1619837 boots for me.
The indicator of wrong kernel is Blue screen on bootup

nachiketa.ramesh said:
You gotta remember this ;-
You need kernel 2.6.35.7 for all ICS (Ice Cream Sandwich) Roms
You need kernel 2.6.35.2 for most GB (Ginger Bread) Roms
Android RC3 runs on 2.6.35.7
I think you should flash RC3 via SUT. Flashing RC3 gives you a stable OS andautomatically gives you Clockworkmod so you can boot into recovery and flash any ics rom directly after this or any 2.6.35.7 based GB Rom
For some reason though, on neither kernels, this -http://forum.xda-developers.com/showthread.php?t=1619837 boots for me.
The indicator of wrong kernel is Blue screen on bootup
Click to expand...
Click to collapse
thank you very much for your valuable help, the problem I think is the kernel that I have now:
kernel: 2.6.32.9.
is there any way I can change the current kernel??

TheMasterMindGT said:
thank you very much for your valuable help, the problem I think is the kernel that I have now:
kernel: 2.6.32.9.
is there any way I can change the current kernel??
Click to expand...
Click to collapse
Flashing RC3 automatically gives you the ics kernel.
You can also use CK Kernel 0.4d in dev threads and flash via cwm but it will not work with your current rom

nachiketa.ramesh said:
Flashing RC3 automatically gives you the ics kernel.
You can also use CK Kernel 0.4d in dev threads and flash via cwm but it will not work with your current rom
Click to expand...
Click to collapse
thank you very much by observation I will look for files on the issues.

Here are the links you can refer to
RC3-
http://forum.xda-developers.com/showthread.php?t=1446449
CK Kernel 0.4d
http://forum.xda-developers.com/showthread.php?t=1728461

Help From .35 kernel to .32 kernel possible?
Hi i just wanted to ask since im on .35 kernel and using an ICS based rom CM9/AOKP ROM, how will i be able to go back to .32 kernel any links where i can get it and how to do it? i want to go back to MIUI .2.4.13 by free radical? thanks

endlesone said:
Hi i just wanted to ask since im on .35 kernel and using an ICS based rom CM9/AOKP ROM, how will i be able to go back to .32 kernel any links where i can get it and how to do it? i want to go back to MIUI .2.4.13 by free radical? thanks
Click to expand...
Click to collapse
Possible
Flash RC 1 through SUT LR
then Flash MIUI by FR
enjoy

RC1 from Andro id v3.3 rc1?
vivekb said:
Possible
Flash RC 1 through SUT LR
then Flash MIUI by FR
enjoy
Click to expand...
Click to collapse
by RC 1 you mean FB0G-Andro-ID_V3.3-RC1.7z
thanks

endlesone said:
by RC 1 you mean FB0G-Andro-ID_V3.3-RC1.7z
thanks
Click to expand...
Click to collapse
Yes. That should do the trick.
As an alternative, you can still flash GB stock from your manufacturer (most likely .32 kernel).

=)
k1chy said:
Yes. That should do the trick.
As an alternative, you can still flash GB stock from your manufacturer (most likely .32 kernel).
Click to expand...
Click to collapse
thanks for the reply.

After spending all night struggling with installing the kernel achieves install this ROM but I use the touch screen, anyone know what I can do???
rom is:
http://forum.xda-developers.com/showthread.php?t=1798814

[PRO][KERNEL] Riyal-based kernel with better touchscreen precision & SE logo

Hi, this is my first kernel, this based on the latest Ultima ICS kernel from riyal, with two minor tweaks
-now touchscreen reponse while swiping is 4px instead of 9px, so no more bumpy movements while draging items
-official "Sony Ericsson" boot logo
Information about the touchscreen problem (if you have not noticed it):
http://talk.sonymobile.com/thread/40474
the problem is present in latest FXP (but probably not in next's) and also in stock kernel ICS
The solutions was 99% done by nicklas lof, here:
http://review.cyanogenmod.com/#/c/22164/
Works in Stock ICS, 431 and 587, it should work with FXP releases too
Installation:
Flash kernel using fastboot
Flash original Riyal wifi Modules using CWM
Riyals kernel thread is here
I do not deserve any credits on this, I just moved a line in code to compile and changed logo. :good:

What is Stock ICS 538? or you mean 587

the recovery are same or did u update it too ?

I have to install the img with fastboot ... And I have everything right???

Thanks for this kernel. will give it try one of these days

New Kernel for PRO [MK16a/i]
Thanks dafsoftware :good:
So just to clarify. Everything is the same as Ultima ICS Kernel v1.4 with the changes you made for the touchscreen precision and SE-X logo. The WiFi modules to flash are also of the v1.4 too right?
I'll try this when you confirm my query, as I am running on the Stock ICS MK16a 4.1.B.0.587 (US) build. I'll try to post any issues that I come across after flashing
[email protected]
MK16a Rooted, BL Unlocked
Kernel: LuPuS-PRo-v3-LiNaRo
Stock ICS ROM .587
BB 77

[email protected] said:
Thanks dafsoftware :good:
So just to clarify. Everything is the same as Ultima ICS Kernel v1.4 with the changes you made for the touchscreen precision and SE-X logo. The WiFi modules to flash are also of the v1.4 too right?
I'll try this when you confirm my query, as I am running on the Stock ICS MK16a 4.1.B.0.587 (US) build. I'll try to post any issues that I come across after flashing
[email protected]
MK16a Rooted, BL Unlocked
Kernel: LuPuS-PRo-v3-LiNaRo
Stock ICS ROM .587
BB 77
Click to expand...
Click to collapse
You are right, this is based in Ultima ICS v1.4, in fact Riyal already has this in his sourcecode, so next's versión should already have this fix, you have to use v1.4 modules

lawong said:
the recovery are same or did u update it too ?
Click to expand...
Click to collapse
Recovery is the same

josejuangr said:
I have to install the img with fastboot ... And I have everything right???
Click to expand...
Click to collapse
After you flash the kernel you have to flash latest wifi modules from riyal, using CWM

Why now 4px? Was Gingerbread not 2px?

paul5425 said:
Why now 4px? Was Gingerbread not 2px?
Click to expand...
Click to collapse
I think GB was 2px, but with the current driver is quite hard to tap on links at 2px, I will compile one at 2px if you want to try

I use this kernel with stock ICS 587 and my phone gets freeze every time I unplug from charger and PC.
Anyone has the same problem?

Can you please update stock kernel to use this fix.
Or give some link to add recovery to stock kernel.
Thanks,
Rajesh

rajeshjamnadas said:
Can you please update stock kernel to use this fix.
Or give some link to add recovery to stock kernel.
Thanks,
Rajesh
Click to expand...
Click to collapse
This is based on latest riyal changes, I think it has voltages messed up, so I will have to build it from stock kernel someday. I dont know how to add recovery to it.

I am, but not exactly when disconnecting the charger, only when its charging and very randomly, I think the source I am using has a messed up voltage table, I need to find the original voltage tables to fix it.

dafsoftware said:
I am, but not exactly when disconnecting the charger, only when its charging and very randomly, I think the source I am using has a messed up voltage table, I need to find the original voltage tables to fix it.
Click to expand...
Click to collapse
omg so nice plzz make it bugfree and everybody will be happy! Currently using this in combi with ics Miui. Thanks alot bro for ur work!
If u need any donation or help i will be there.
hopefully u will add more things if u have the time:good::good::good::laugh:

xperiap said:
omg so nice plzz make it bugfree and everybody will be happy! Currently using this in combi with ics Miui. Thanks alot bro for ur work!
If u need any donation or help i will be there.
hopefully u will add more things if u have the time:good::good::good::laugh:
Click to expand...
Click to collapse
+1
great kernel, thanks for your work.
also flashed it with MIUI ICS, feels smoother and fast.
thanks again.

dafsoftware said:
I think GB was 2px, but with the current driver is quite hard to tap on links at 2px, I will compile one at 2px if you want to try
Click to expand...
Click to collapse
OK - after reading more it sounds like there has been some structural change to the driver model (something that needs fixed at a deeper level). Anyway, it would be great if you could additionally provide us with a ROM set at 2px just so we can see for ourselves.

Ext4
Does this kernel support the Ext4 partition? Great kernel by the way...
Edit : and.... Swap partition?

Even better than that, I notice that the Touch Move app has a "tune" mode which allows the user to tune the sensitivity themself. It's currently only compatible with a couple of GSII custom kernels:
http://tegrak2x.blogspot.co.uk/2011/10/touch-move-tune-compatible-kernels.html?m=1
It would be interesting to see if we could get Touch Move Tune working on Xperia devices too.
Sent from my MK16i using xda app-developers app

[Q] phone not chrage

hello!!
i have a problem with my phone.
when i chrage my phone in usb cable or wall charger is write to me "low tempratur!! unable to charge phone"
what i can to do?
it's happen to me in v30B rom (official or nesiss) and in cm 9/10 rom.
in zeus v 7.06 averything is ok.
thank you for the help!!
i just want ics..
have a nice day!!

jump!! please help me!

Hi...I had some similar problems when I tried the V30j for ku 5900.
Now I am in cm10.1 and I never had this problem again.
Do you you have the original battery?
Try to flash the latest version of zero gravity kernel (find in dev section)..do not think you resolve in this way... But try.
At last try to reflash the stock V30b..maybe you had some problems during the upgrade..
Bye
Sent from my CM10.1 Optimus Black