I needed to transfer some files from my N1 to my Pc, so I connected it to my PC using the cable. I was expecting the black mounting screen prompting me to mount the SD card, but nothing happened. I restarted my device twice, but the case is still the same. What could have been wrong? I have not installed any app within this time, not removed any. I have used it in just ordinary daily manner, messaging and calling and nothing else. My N1 runs on Froyo, OTA. No jailbreak.
Please help. Thank you
u need to assign a drive letter to your SD card
Noob answer: is it on the status pulldown bar?
Do you have USB Debugging enabled?
Does the phone recognise that it's been plugged in (ie start charging)?
Similar problem
I am having a similar problem with my N1 running CM6 stable. When I turn off USB debugging and plug the phone into my Win7 laptop, I get the USB connected screen, but when I turn on USB storage the SD drive doesn't mount i.e. I cannot see/access the drive in Windows 7. The N1 status bar says USB storage is on.
Under Device Manager, the N1 shows up as Android Phone-->Android ADB Interface with driver version 2.0.10.2 dated 11/08/2009.
Any help would be much appreciated.
Rusty! said:
Does the phone recognise that it's been plugged in (ie start charging)?
Click to expand...
Click to collapse
No, THIS is exactly the problem, the phone dies not recognise that it has been connected to a computer. It does start charging, but no sign of SD memory mount/unmount. Nothing. Just simply charging.
khaytsus said:
Do you have USB Debugging enabled?
Click to expand...
Click to collapse
No, USB debugging is not enabled. I double checked it.
I guess that Windows also doesn't recognize the phone as anything (Device Manager doesn't show anything new plugged in)?
In that case, enable USB Debugging, and see if the phone is recognized by Windows.
If it is - the problem is somewhere in SW.
If it isn't - then it might be a faulty USB cable or connector (from any side - phone or PC).
same thing happens to me from time to time. restart your computer and that should fix your problem.
Sent from my Nexus One using XDA App
So for 3 days now i have been reading thread after thread on xda. i cant seem to connect my phone to my computer. Every time i come across a new link to drivers i try it but still no dice.
What happens:
Install Drivers
Phone set to mass storage
plug usb in
mount sd
windows thinks...
USB Device not recognized
Phone: Captivate, stock everything (with ota update)
OS: Windows 7 64 bit
What am i doing or not doing?
I apologize in advance if i have not stumble across thread where this has already been answered.
hacklerg said:
So for 3 days now i have been reading thread after thread on xda. i cant seem to connect my phone to my computer. Every time i come across a new link to drivers i try it but still no dice.
What happens:
Install Drivers
Phone set to mass storage
plug usb in
mount sd
windows thinks...
USB Device not recognized
Phone: Captivate, stock everything (with ota update)
OS: Windows 7 64 bit
What am i doing or not doing?
I apologize in advance if i have not stumble across thread where this has already been answered.
Click to expand...
Click to collapse
Try uninstalling all the drivers and try one again using x64 (I know you probably did it already, but just confirming).
Maybe try doing a factory reset?
So i uninstalled the drivers using the uninstaller application that came with the download then i deleted the files off the computer.
went to the captivate wiki on xda, downloaded the 64 bit drivers from that link (look exactly the same as the other links), then ran the installer application from that download.
what happened was at the end of the install wizard it said that: "mss install wizard was not completed... install wizard was not succesfully installed samsung usb driver for mobile phones.".
I did however notice that at one point in the wizad it called the driver x86 instea of x64.
i would be lieing if i didnt say i hated samsung right now. o yea and i think at&t too. ha ha
Thanks for the help! : )
so in addition to hours spent on other days, im about 5 hours into trying to make the phone connect today.
it seems worse now, it only sometimes sees a device it cant recognize.
i tried more batches of driver uninstall/installs and i even downloaded the full kies.
nothing seems to make it go. im about to lob this thing across the room. any other suggestions or people with a similar problem?
any help would be much appreciated.
1) Scrub your system again of all Samsung drivers.
2) Go to Samsung Software & Firmware Downloads and get the Mini Kies program.
3) Install Mini Kies, this will install drivers.
4) Set USB settings on phone to ask on connection, Settings>Applications>USB Settings>Ask on Connection
5) Connect phone to computer
6) Select Mass Storage when the phone asks
7) Mount phone to computer, depends on which ROM you are running
8) Report back,
I'm running Windows 7 x64 Home Premium and have no troubles connecting. Hope this helps.
ok thanks for the tips.
Here's what i did:
Download mini kies from the link (i noticed that there were driver there to but i did not download that link)
Set phone to ask on connection
plug phone into computer
set to mass storage.
mount sd card
computer says "usb device not recognzed"
Mini Kies still says "please connect mobile phone"
i scream!
what do you suggest i do from here?
hacklerg said:
ok thanks for the tips.
Here's what i did:
Download mini kies from the link (i noticed that there were driver there to but i did not download that link)
Set phone to ask on connection
plug phone into computer
set to mass storage.
mount sd card
computer says "usb device not recognzed"
Mini Kies still says "please connect mobile phone"
i scream!
what do you suggest i do from here?
Click to expand...
Click to collapse
Have you tried a rear USB port instead of a front? I don't know why but many have claimed this was the trick. It should not work, but for some reason it does for some.
alphadog00 said:
Have you tried a rear USB port instead of a front? I don't know why but many have claimed this was the trick. It should not work, but for some reason it does for some.
Click to expand...
Click to collapse
The usb ports on the back of the computer are usually connected directly to the motherboard. The usb ports located other places on the computer are usually connected to the mother board via a secondary card of some type - this adds another level of hardware and software drivers required to make those ports work. Also it is not unusual for some usb to operate at different power levels - often referred to as powered and non powered ports.
So not all ports are the same which is why some people have different results on different ports on their computer.
One other option that sometimes works: turn on usb debugging in settings/applications/development. Then connect the usb. Pull down the notification window and select the button that says something like "select to copy files...". This brings up a dialogue box asking to mount the phone, and you select that.
Sent from my SAMSUNG-SGH-I897 using XDA App
alright i tried
every single usb port (it a laptop btw sorry should of said that earlier)
and also with and without debugging
computer still says usb device not recognized.
is there any more info that anyone needs? Tried hooking the phone up to a mac also (snow leopard osx laptop) no luck still.
dayv said:
The usb ports on the back of the computer are usually connected directly to the motherboard. The usb ports located other places on the computer are usually connected to the mother board via a secondary card of some type - this adds another level of hardware and software drivers required to make those ports work. Also it is not unusual for some usb to operate at different power levels - often referred to as powered and non powered ports.
So not all ports are the same which is why some people have different results on different ports on their computer.
Click to expand...
Click to collapse
I have built many machines and never had a device work on one USB port and not on another.
All my USB devices that require power, require an actual AC adapter -As for unpowered ports - never heard of that. Powered and unpowered hubs yes - but not unpowered ports.
alphadog00 said:
I have built many machines and never had a device work on one USB port and not on another.
All my USB devices that require power, require an actual AC adapter -As for unpowered ports - never heard of that. Powered and unpowered hubs yes - but not unpowered ports.
Click to expand...
Click to collapse
First, just to make this clear all usb ports are powered, and so long as they are in compliance with the usb standard they are powered to 5v.
Second, what you referring to with powered/non powered usb hubs is a usb hub that has a secondary power source (ie includes ac power cable maybe) vs a usb hub that is only powered by the usb serial bus via the usb connecter to the computer.
What was referring to in powered/non powered usb port is a technology included in some ports that allows that port to use the power of two usb ports in one port - not sure but I believe it is an ibm technology - which is some times referred to slangly and inaccurately as powered usb
Now the point of my post was to point out even though there is a universal standard for usb - depending on how these ports are actually connected to the serial bus on the mother board will affect they way they perform - ie usb on the back of the computer that is mounted directly to the mother board serial bus vs one connected via a pci card.
And even though you have never experienced differing performance in your usb ports does not mean that it doesn't happen - it is actually quite common particularly with devices that both connect via usb as well as charge its battery via usb.
I currently have a computer with 7 usb ports all of which will connect and work with my wife's ipod - but I have found two of these ports that will not charge her ipod. most likely this failure to charge her ipod is due to the hardware (or the software driver for the said hardware) in between these two ports and the mother board.
In all of the computers you have built have you built any that had usb ports mounted directly on the mother board serial bus that you also connected a usb pci card to allow for more usb ports? I guarantee you if you do this often enough you wil eventually build a computer that has usb ports with differing performance.
while the info on usb is nice : ) i would very much appreciate any help on gettingmy phone connected. thanks!
hacklerg said:
while the info on usb is nice : ) i would very much appreciate any help on gettingmy phone connected. thanks!
Click to expand...
Click to collapse
I'm guessing by now you have tried all your ports, lol. have you tested your phone on other computers and/or with other usb cables?
One thing to try is check and see if there are any driver updates for the usb hardware in your computer. You can usually find these updates with the computer vendor and/or mother board manufacturer support.
Sorry I missed your post earlier about connecting to a mac - when you connected to the mac was your phone in debugging mode?
I don't know if it is necessary to connect to a mac, but to get some linux distros to mount the drives in cappi it has to be in debugging mode and while linux and NEXTstep are different they are in the same family, have the same ancestor. maybe if someone with a mac read s this they can let us know if it is needed.
If you keep connecting to different computer with no luck, try a different usb cable.
Actually its connecting to a pc. I just tried to connect to a mac wouldn't work there either.
But I've tried all the different combos of debugging and mass storage options it just says it doesn't recognize the usb device.
I have tried a bunch of different drivers and using both kies and mini kies.
Windows 7 64 bit
Laptop
Captivate (stock everything)
Sent from my SAMSUNG-SGH-I897 using XDA App
hacklerg said:
Actually its connecting to a pc. I just tried to connect to a mac wouldn't work there either.
But I've tried all the different combos of debugging and mass storage options it just says it doesn't recognize the usb device.
I have tried a bunch of different drivers and using both kies and mini kies.
Windows 7 64 bit
Laptop
Captivate (stock everything)
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
getting unrecognized usb device is almost certainly a driver issue - what ever kept it from working with the mac is something else.
have you downloaded and installed the drivers dg has linked in his odin 3 one click thread?
Second have you had a chance to check if your computer had any usb driver updates? One of my machines would not properly identify my phone that I tried reinstalling drivers on and I found there was and update for the mother board usb controller - after updating it instantly recognized it.
I am having the same issue with an added twist, which is that some USB ports will rapidly disconnection/reconnect the device to windows even though I havent unplugged it.
I have/had adb working on both my old laptop, and desktop. And like the OP I have spent many hours trying to get this to work. Very frustrating.
What is the difference between MTP and PTP on the TouchPad with CM9?
Is there a Mass Storage mode available? (MTP and PTP don't mount the tablet as an USB storage device).
Thank you!
mikey_xda said:
What is the difference between MTP and PTP on the TouchPad with CM9?
Is there a Mass Storage mode available? (MTP and PTP don't mount the tablet as an USB storage device).
Thank you!
Click to expand...
Click to collapse
http://en.wikipedia.org/wiki/Media_Transfer_Protocol
Providing you get MTP to work it does have advantages over a pure USB disk mount which is probably why it isn't in ICS as standard.
MTP is the closest to Mass Storage mode at the moment, until they can make it work with ICS. From what I can tell, it's a widespread issue with many of the ICS Rom's out there.
Thank you both for replying. It seems MTP makes more sense than USB mass storage and is safer too.
Actually, for moving files around I found out wifi solutions like AirDroid are convenient and I don't have to plug in the cable.
mikey_xda said:
Thank you both for replying. It seems MTP makes more sense than USB mass storage and is safer too.
Actually, for moving files around I found out wifi solutions like AirDroid are convenient and I don't have to plug in the cable.
Click to expand...
Click to collapse
Yes. Wifi connections avoid the need to plug cable in much. ES File Explorer, which is a very good file manager, can also see network shares on PCs over the wifi network avoiding the need for a separate app.
I still do use cable connection when transferring large files like Nandroid backupsas it is faster.
Make sure you use a USB2 port!
I kept having issues copying files to both my Galaxy Nexus and Touchpad until I realized I was using a v1 port. Swapped some cables around and it's working great.
I have tried ES File Explorer and it is slower than AirDroid when transferring larger files. On the other hand, it is more convenient because you can manage the transfers from the tablet (on AirDroid you do all stuff on the PC).
Hi , My name is Ramadoss.N, I have converted 2 Hp touchpad into KitKat 4.4.4 using Hptoolbox V42 and cynogenmod 11 with other zip fils. It works very good. The conversions are done via MacBook .The problem is HP touchpad is not recoganised by my MacBook Air to transfer music. Is there anything to be done in Settings. If the please let me know to my mail id. My mail id is [email protected]. Thank you in advance and looking for your response.
Can anyone tell me if my HTC One (FW 4.3, rooted and fully chraged) can be used with more than one mounted device at a time ?
My aim is to mount a CF card reader and a portable HDD, so I can transfer photos (RAWs) from the reader directly to the HDD.
I've bought a powered USB 3 hub and downloaded the "Nexus Media Importer" app.
But, I'm unable to make 2 devices show at once. Even if I try 2 USB sticks.
All the devices will show up individually, but not when more than one device is connected.
I've connected the USB hub to my PC and it works perfectly.
I'm not sure if the problem is the app or if the phone can't handle mounting 2 or more devices.
Thank you for any help.
Anyone ?
My HTC One is connected and is sharing internet via usb tethering to my pc however it just shows that the network has no internet access even though it works on PC. I have android 4.3 custom Rom, but the correct driver is installed and windows 7 reecognizes the phone in network adapters.