Database Develop

Trying to upgrade from cyanogen 9 to cyanogen 10 now missing phone and camera apps.

I have the GT-i9000M
I did not put Cyanogen 9 on myself, the phone was given to me with it on it. I wanted to upgrade to cyanogen 10 so I followed the instructions here: http://forum.xda-developers.com/showthread.php?t=1778526 .
"- Upgrading from CM7/CM9?
Do a Nandroid Backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon"
Did my nandroid backup obviously, wiped everything, then I went to "install zip from sdcard" picked "cm-10-20120726-UNOFFICIAL-galaxysmtd.zip" then my phone went into a reboot loop of just failing. So I went back into recover with 3 button combo and wiped everything again and restored from my nandroid backup, then when I booted back up I had no lockscreen and my phone and camera apps were gone.
What did I do wrong and how do I get those back and/or upgrade to cyanogen 10 properly?
Keep in mind this is my first time doing anything like this to my android, I was given it with cyanogen 9 on it.
Edit: Now when I try restoring from my nandroid backup and reboot all I see the is the cyanogen (mod) 9 animation boot screen forever, it never boots.

fastfreddy101 said:
Edit: Now when I try restoring from my nandroid backup and reboot all I see the is the cyanogen (mod) 9 animation boot screen forever, it never boots.
Click to expand...
Click to collapse
First i9000M is not same as I9000 http://forum.xda-developers.com/showthread.php?t=886158
so you need to check for compatibility problems
This procedure is for i9000
1. Using CWM, make sure to wipe data/factory reset, then wipe cache, and then go into advanced, and wipe the Dalvik cache too.
2. From there, flash the ROM
3. Afterwards, repeat the wipe step (step #1).
4. Continuing on, go into advanced and fix permissions.
5. Finally, reboot the device.

Thanks for the reply!
I finally got it by wiping everything and the dalvik cache, and reinstalling the zip from the SD card, got everything working now.

[Q] Issue installing CM10 Nightly

So, it`s my first custom rom so i don't have any experience with it, so yes, i'm a noobie.
I've seen the ICS 4.0 Sources Out thread for a while and when i saw the CM10 release by arcee i decided to give it a try
but got stuck on LG boot logo.
What i did:
1. install cwm recovery v4.0.0.5
2. wipe data/factory reset
3. wipe cache partition
4. install cm-10-20121030-nightly-p990.zip (success install)
5. reboot system now
Then it get stucked at the lg logo... i can acess the cwm and try to reflash the ROM... but it'll get stuck at the same logo
Any solution?
Thanks
EDIT1: Ok, i just flashed a stock rom and it worked... now i'm on stock gingerbread 2.3.4, any tutorial to install cm10?
Thanks a lot... i just tought i bricked my phone

Javiern said:
So, it`s my first custom rom so i don't have any experience with it, so yes, i'm a noobie.
I've seen the ICS 4.0 Sources Out thread for a while and when i saw the CM10 release by arcee i decided to give it a try
but got stuck on LG boot logo.
What i did:
1. install cwm recovery v4.0.0.5
2. wipe data/factory reset
3. wipe cache partition
4. install cm-10-20121030-nightly-p990.zip (sucess install)
5. reboot system now
Then it get stucked at the lg logo... i can acess the cwm and try to reflash the ROM... but it'll get stuck at the same logo
Any solution?
Thanks
Thanks
Click to expand...
Click to collapse
Wipe system also then try.
Sent from my LG-P999

how?
cricketAC said:
Wipe system also then try.
Sent from my LG-P999
Click to expand...
Click to collapse
How i do that? i don't see that option on cwm recovery
"
-reboot system now
-apply update from sdcard
-wipe data/factory reset (that's the one i used)
-wipe cache partition
-install zip from sdcard
-backup and restore
-mounts and storage
-advanced
-power off
-go back
"
EDIT1: I tried to format /system but it says "unable to mount"... mount doesn't work either
EDIT2: Backup file it isn't working... totally f***** up

1: wipe data/factory reset
2: wipe cache
3: advanced>wipe dalvik cache
4: mounts n storage>format data, format cache n format system
this is what is meant by full wipe
5: install CM10
6: install latest gapps package for jb
7: reboot system
this should work

Hey,
This helped for me: (no bugs for now)
-Nvflash to original GB rom from lg
-rooted the device
-installed cwm
-flash cm7 (latest nightly as recommended fom ricardo for the bootloader etc)
-installed gb gapps
-installed first cm10 nightly
everything workes fine so far
I came from the cm9 paranoid build
I also wasstuck at the logo both with cm7 and 10
hope it'll help you
Sent from my LG-P990 using xda app-developers app

zxr72 said:
Hey,
This helped for me: (no bugs for now)
-Nvflash to original GB rom from lg
-rooted the device
-installed cwm
-flash cm7 (latest nightly as recommended fom ricardo for the bootloader etc)
-installed gb gapps
-installed first cm10 nightly
everything workes fine so far
I came from the cm9 paranoid build
I also wasstuck at the logo both with cm7 and 10
hope it'll help you
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
I just did almost the same thing, just didn't flash cm7
working now... CM10 is soooo smooth
any bug? i don't get the vibration bug, clock FC or the non see External SD
all is working great... wow
Thanks for the help

What am I doing wrong?
Hi!
I never used CM7 or any custom rom.
I had 20s flashed via kdz.
I'm root. I installed ClockWorkMod recovery 4.0.0.5 and made clean cache, wipe dalvik etc.
I installed CM10 from zip (it only took a few seconds!) and rebooted. It showed two LG logos and never passed that.
I kept reading and saw this thread so I used smartflash to go back to FROYO, rooted, installed CWM and installed the last CM7 nightly (only a few seconds!) and rebooted.
All I get is a static LG logo and nothing else. I don't know what to do!
Thanks and sorry about my english!

1. NvFlash to 10b
2. Smart flash to latest stock ROM for your country
3. Rooted
4. Install ROM manager
5. After install ROM manager, open it
6. Install CWM v.6 through ROM manager
7. Boot into recovery
8. Wipe data, wipe cache, wipe dalvik-cache, wipe battery stats
9. Install latest cm10 nightly through install zip from SD card
10. Install gapss through install zip from sd card
Sent from my LG-P990 using xda app-developers app

ardiade said:
1. NvFlash to 10b
2. Smart flash to latest stock ROM for your country
3. Rooted
4. Install ROM manager
5. After install ROM manager, open it
6. Install CWM v.6 through ROM manager
7. Boot into recovery
8. Wipe data, wipe cache, wipe dalvik-cache, wipe battery stats
9. Install latest cm10 nightly through install zip from SD card
10. Install gapss through install zip from sd card
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
How do I install Nvflash? I have found tutorials for it but they are for the g2x. Will it still work?

I bought an o2x to replace my sgs1 which is great with cm10.
My story:
Phone was used and bone stock with froyo and 725bb
Rooted
Installed rom manager then flashed cwm 6.0.1.5 from rom manager
wiped everything
installed latest CM7
usb mass storage stopped working (was working with stock froyo)
copied latest cm10 nightly and gapps to an sdcard
wiped again
flashed cm10 and gapps
now I'M stuck on cyanogenmod logo and the lower buttons are lightning
repeated the process few times and still stucked at cm logo
Any ideas? Thanks!
*Update* Removed the battery and restarted the phone and now it seems to be working!

[Q] Fracked up my phone need help!

Hello everyone, I am so desperate, I rooted my Galaxy Ace GT-S5830, then with root uninstaller by mistake (HUGE MISTAKE ) I uninstalled the main menu, now everytime I starth the phone all i see is a black screen with the notification bar (I can scroll it down) but then nothing, if i reboot it never starts again, I go into recovery mode, and select factory reset, but NOTHING.
I found a tutorial on how to flash a rom, but how do I flash Cyanogen Mod 10.1?

To flash CM 10.1 you need to read the OPs post on that thread, there are instructions on how to flash it.
Once you have flashed it successfully you will be sorted
Do you need a link to the cyanogen mod 10.1 thread?
Sent from my GT-S5830

Download the root file,CWM Recovery and CM 10.1 ROM and copy it to your SD card !
Then go to recovery and root your device again and then flash CWM.
Now do factory reset,wipe cache and wipe dalvik cache.
Then go to "install zip from sdcard" and select ur ROM !
Reboot ur device and done

alright! i fixed my phone! it booted now! I flashed stock rom, now I have a question, how do I install cyanogen mod?
thanks for your help!

http://forum.xda-developers.com/showthread.php?t=2011671
Is this the one that you want?
if it is this is how to install it:
-Boot into recovery
-wipe data/ factory reset
-wipe the cache partition
-go to, advanced/ wipe dalvik cache
-Install zip from sdcard (it will be called something like cm10rom.zip)

[Q] cm10.1 Nightlies not booting, kinda

I'm want get the current cm10.1 nightlies to run on my n7000. I'm using cm-10.1-20130511-NIGHTLY-n7000.zip with 20130301 gapps package but the furthest I can get is the welcome screen. Selecting my language will freeze the phone. I've tried re-installing wipe cache, wipe data etc.. even retried to whole install a few times but nothing works. Any ideas? Sucks cos I just finished a mod on my p7510 to display now playing in status bar and want to port it over.

that is an unclean install,
on cm kernel on its recovery format system, data,preload cache an dalvik and reinstall. also make sure you have latest gapps for that version

baz77 said:
that is an unclean install,
on cm kernel on its recovery format system, data,preload cache an dalvik and reinstall. also make sure you have latest gapps for that version
Click to expand...
Click to collapse
Heres what I'm doing:
Flash abyss kernell (I have emmc bug and have had to recover from it twice now),
factory reset,
Flash cm10.1 in order to install kernel and recovery a reboot recovery,
Now in cyanogen mod recovery:
wipe cache,
wipe dalvik cache,
wipe system
wipe date,
wipe preload,
re-install cm10.1
install gapps 20130301 (the latest gapps)
what can be going wrong?

thats pretty thorought. I would recommend not abys but cm kernel instead.

tried it with both

Then I dont know. What gapps version are you flashing?
I havent read it being an issue with latest cm, maybe bad download? md5 matches download?
Also try on stock gb rom (for your phones csc), if none of above, if with emmc brick check app some sectors are damaged. Thats what I would do. If damaged, or still weird lags check warranty.

Using the 201301 gapps from goo.im. Downloaded a few times now same issue, its probably my phone as partitions are a little strange from emmc recovery.

[Q] OMNI AsylumKANG Rom flash problems

Hey,
I got little problem and I need some help. I wanted to falsh OMNI AsylumKANG (from thread http://forum.xda-developers.com/showthread.php?t=2591479 ) , but my n7000 failed to start system. Instead after samsung logo it restarted into twrp screen.My version number is N7000XXLT9. These are steps I made:
1. using stock recovery I flashed PhilZ-cwm6-XXLT9-ORA-5.11.2-signed
2. then launched and rebooted into PhilZ recovery
3. flashed raw_kernel_r4_j43 and reboot into recovery
4. wiped data, cache partition and dalvik cache
7. flashed AsylumKANG_4.4.2_n7000_Build2.2
8. flashed pa_gapps-modular-mini-4.4.2-20140111-signed
9. flashed UPDATE-SuperSU-v1.86
10. reboot
Afterwards as I said phoned showed samsung logo and rebooted itself to twrp recovery
What is problem here?
Thanks for help.

Should reflash Philz. Go to wipe/factory reset menu, then choose clean to install rom. Then go to advanced, wipe dalvik cache. Then reflash raw5, then flask rom.
Sent from my phone.

forest1971 said:
Should reflash Philz. Go to wipe/factory reset menu, then choose clean to install rom. Then go to advanced, wipe dalvik cache. Then reflash raw5, then flask rom.
Sent from my phone.
Click to expand...
Click to collapse
Thanks for idea but I didn't help I flashed stock rom, then Philz then clean to install rom, wipe dalvik cache and the rest is just like from step 3 down. Same issue. I flashed once again stock rom and Philz, but this time installed paranoid android 3+ (pa_n7000-3.99-RC2-20131012). It worked. Maybe I just wait for more kitkat 4.4 based rom releases and then try.

After flash r5 you need to boot into recovery before proceed with lashing rom. Make sure you have done that step.
Sent from my phone.

forest1971 said:
After flash r5 you need to boot into recovery before proceed with lashing rom. Make sure you have done that step.
Sent from my phone.
Click to expand...
Click to collapse
After flash r4 i boot into recovery. You're saying to flash r5 instead of r4?