I'm want get the current cm10.1 nightlies to run on my n7000. I'm using cm-10.1-20130511-NIGHTLY-n7000.zip with 20130301 gapps package but the furthest I can get is the welcome screen. Selecting my language will freeze the phone. I've tried re-installing wipe cache, wipe data etc.. even retried to whole install a few times but nothing works. Any ideas? Sucks cos I just finished a mod on my p7510 to display now playing in status bar and want to port it over.
that is an unclean install,
on cm kernel on its recovery format system, data,preload cache an dalvik and reinstall. also make sure you have latest gapps for that version
baz77 said:
that is an unclean install,
on cm kernel on its recovery format system, data,preload cache an dalvik and reinstall. also make sure you have latest gapps for that version
Click to expand...
Click to collapse
Heres what I'm doing:
Flash abyss kernell (I have emmc bug and have had to recover from it twice now),
factory reset,
Flash cm10.1 in order to install kernel and recovery a reboot recovery,
Now in cyanogen mod recovery:
wipe cache,
wipe dalvik cache,
wipe system
wipe date,
wipe preload,
re-install cm10.1
install gapps 20130301 (the latest gapps)
what can be going wrong?
thats pretty thorought. I would recommend not abys but cm kernel instead.
tried it with both
Then I dont know. What gapps version are you flashing?
I havent read it being an issue with latest cm, maybe bad download? md5 matches download?
Also try on stock gb rom (for your phones csc), if none of above, if with emmc brick check app some sectors are damaged. Thats what I would do. If damaged, or still weird lags check warranty.
Using the 201301 gapps from goo.im. Downloaded a few times now same issue, its probably my phone as partitions are a little strange from emmc recovery.
Related
Hi everyone,
Newbie posting here.. I've had my share of flashing Roms a few times (say 4 or 5 times) but i stuck with cm 7.2 when they released the stable mod for the i9000.
Now i see that the cm9 stable mod has been released and i definitely want to try that out however, I'm not sure on how to go about it and I don't want to do anything stupid. Don't get me wrong, i've tried reading around through different sites and forums but all the mix and match methods of flashing and installing has gotten me confused..
My main question is, how do i flash to cm9 from cm 7.2? naturally i have cwm installed and can boot into cwm recovery. Am on the XXJVK baseband with the pawitp kernel. Not sure if i have to donwload new drivers (since the base ROM is going to change)...
Do i just place the zip file for the cm9 mod in the internal sd storage? could you guys help me out and let me know if this process is correct:
1) save zip file in internal storage (both cm9 and gapps)
2) do a nandroid backup
3) boot into recovery
4) wipe data and dalvik cache
5) install the package
6) wipe data and dalvik cache
7) install gapps
8) reboot
Once it boots up, i'm assuming it'll be running cm9 already.. could you guys help me out and let me know if this procedure's correct? sorry for the noob question but i'd rather just make sure and ask you guys first.
thanks in advance guys! cheers and more power!
ablack01 said:
Hi everyone,
Newbie posting here.. I've had my share of flashing Roms a few times (say 4 or 5 times) but i stuck with cm 7.2 when they released the stable mod for the i9000.
Now i see that the cm9 stable mod has been released and i definitely want to try that out however, I'm not sure on how to go about it and I don't want to do anything stupid. Don't get me wrong, i've tried reading around through different sites and forums but all the mix and match methods of flashing and installing has gotten me confused..
My main question is, how do i flash to cm9 from cm 7.2? naturally i have cwm installed and can boot into cwm recovery. Am on the XXJVK baseband with the pawitp kernel. Not sure if i have to donwload new drivers (since the base ROM is going to change)...
Do i just place the zip file for the cm9 mod in the internal sd storage? could you guys help me out and let me know if this process is correct:
1) save zip file in internal storage (both cm9 and gapps)
2) do a nandroid backup
3) boot into recovery
4) wipe data and dalvik cache
5) install the package
6) wipe data and dalvik cache
7) install gapps
8) reboot
Once it boots up, i'm assuming it'll be running cm9 already.. could you guys help me out and let me know if this procedure's correct? sorry for the noob question but i'd rather just make sure and ask you guys first.
thanks in advance guys! cheers and more power!
Click to expand...
Click to collapse
wipe date
wipe cache
wipe delvik cache
then flash rom nd gapps
wipe cache nd delvik cache again.. good luck..
Best and most reliable way to do this is flashing through stock rom via Odin. Then flashing kernel with CWM Recovery via Odin. And only then flash CM9 via CWM.
thanks for the quick reply guys. will try it out tonight and update this post. hope all goes well.
cheers!
bmwchampz said:
wipe date
wipe cache
wipe delvik cache
then flash rom nd gapps
wipe cache nd delvik cache again.. good luck..
Click to expand...
Click to collapse
and if u want u can try chimera rom from team passion.. it s combination of cm9 and AOKP.. It s stable and fast..
took me less than 10 minutes to flash to cm9 and it's as snappy as i thought it was. now to fix up everything and check if everything's okay.
so far, wifi and network signal are working fine and dandy. might just have a go at that chimera rom.
Hello,
i have recently flashed this rom: http://forum.xda-developers.com/showthread.php?t=2192109 con my i9001
i then tried to flash the gapps-jb-20130301-signed.zip and a more recent 20130421 gapps pack but after flashing using the cwm touch i then reboot and the phone starts normally without any apps installed.
how can i get the gapps to install and work?
thanks
Simone
Hmm, I'd try to wipe everything (rom, dalvik cache, data etc.) and start from scratch with two packages (ROM + chosen GAPPS) then we'll see
just for all of you to know..
since my clockworkmod (i9001 Touch CWM 6.0) taken from here http://forum.xda-developers.com/showthread.php?p=29331775#post29331775 kept giving me strange script errors not working i decided to change it with this one CWM6014-TOUCH-CM9-recovery.zip from the wiki page http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#ClockWorkMod_Recovery
then i did again the same procedure i did a few time till now with the other cwm which is:
wipe data/factory reset
wipe cache
advanced -> wipe dalvik cache
then install from external sd, flashed the rom then flashed the gapps
then reboot phone
i can now say that everything worked fine
so problem was on the cwm! cheers
Hi,
I have the Touchpad installed with Milaq's nightly build 08/25 and the jb-app 2013/03 build.
Is there a way to update to latest Milaq's nightly build and latest jb-app 2013/08/12 without resetting the configuration in Touchpad and will have to re-install all the apps and their config/settings?
I was thinking to install the update via CWM-Clockmod, but afraid that I will have to re-install and reconfig all the apps.
Thanks,
Well, if nothing else, an app like MyBackup Root will be able to save all of your apks+their data. Plenty of other apps do it too, that is just the one I've used. Good luck.
You can try a dirty flash, meaning that you only wipe cache and dalvik (not system or data) when you flash it in recovery. Make sure to do a nandroid first.
There shouldn't be any issues when flashing the new nightly from the recovery (CWM or TWRP). Just remember to wipe cache and Dalvik cache before rebooting to CM.
I did an dirty update to the newest cm10.2 nightly coming from cm10.1 - no bad issues so far.
Be sure to make a backup of your old rom and simply try
ROM's based on original firmware and CM 11 work fine. Doom/Zombie/etc kernels work fine.
But SlimKAT, any official 4.1 or 4.2, Vanir or any other ROM causes hot reboot when opening camera for second time.
First time everything is OK, I can use e.g. PAC ROM for several days, but if I close the camera and open it again (without rebooting) it causes hot reboot. Always.
But CM11 is rock stable so is any original 4.3 and higher.
Any help with that?
Thanx!
slimKAT weekly 5.6's camera works without any problems .bro.
Orangewanted said:
slimKAT weekly 5.6's camera works without any problems .bro.
Click to expand...
Click to collapse
Yes, I know. Once ...
If I start if again it causes hor reboot.
CM 11, stock 4.3/4.4 no problems ...
Z O X said:
Yes, I know. Once ...
If I start if again it causes hor reboot.
CM 11, stock 4.3/4.4 no problems ...
Click to expand...
Click to collapse
Have you done a fresh installation ?
In CWM perform wipe data/factory reset and in mounts and storage section format system.
In TWRP choose advanced in wipe section and wipe dalvik cache, cache, system and data.
or please check your gapps which may cause the problem.
always use the gapps from here http://forum.xda-developers.com/showthread.php?t=2397942
Orangewanted said:
Have you done a fresh installation ?
In CWM perform wipe data/factory reset and in mounts and storage section format system.
In TWRP choose advanced in wipe section and wipe dalvik cache, cache, system and data.
or please check your gapps which may cause the problem.
always use the gapps from here http://forum.xda-developers.com/showthread.php?t=2397942
Click to expand...
Click to collapse
Yes, always fresh.
Point is, even flashed TFT ver 4.1 and 4.2 have same issues. Only 4.3 and 4.4 work OK :-/
Those are the GAPPS I always use ... Don't know. I'll try replacing camera libraries with version that work and see how that goes ...
After installing latest cm11 my phone cant boot into recovery. Or cant boot the rom, even the boot logo of cm doesnt show up.
What i did before;
-Wiped system/cache/data (all f2fs)
-Flashed the latest cm11
-Wiped dalvik cache and boot
-After doing first config. Realized i didnt flash gapps
-Boot into recovery wipe system/data/cache
-Flash rom again, and latest pa gapps, wipe dalvik
-Boom, phone wont boot and cant get boot into recovery.
Tried flashing twrp via odin, latest cm11 with odin and neither of them worked. Can someone help me, please? Thank you.
heithered said:
After installing latest cm11 my phone cant boot into recovery. Or cant boot the rom, even the boot logo of cm doesnt show up.
What i did before;
-Wiped system/cache/data (all f2fs)
-Flashed the latest cm11
-Wiped dalvik cache and boot
-After doing first config. Realized i didnt flash gapps
-Boot into recovery wipe system/data/cache
-Flash rom again, and latest pa gapps, wipe dalvik
-Boom, phone wont boot and cant get boot into recovery.
Tried flashing twrp via odin, latest cm11 with odin and neither of them worked. Can someone help me, please? Thank you.
Click to expand...
Click to collapse
You wiped the system right? So you fkd up your phone. Never wipe the system.
mauam said:
You wiped the system right? So you fkd up your phone. Never wipe the system.
Click to expand...
Click to collapse
Whats wrong with wiping system before flashing a rom?
heithered said:
Whats wrong with wiping system before flashing a rom?
Click to expand...
Click to collapse
Don't know, I only remember a old advice from an old friend here, that's it. I never wiped the system, though. Good luck bud