Related
Hi Guys,
Can someone guide / help me on how to upgrade my N7000 unit to JB and still rooted.
I'm still using GingerBread ROM with AbyssNote Kernel and already Rooted. Also installed with CWM
I want to know the step in upgrading it to Custom JB ROMs (MKalter JB, RocketRom)
Any suggestion will greatly appreciated.
Kindly refer on the images regarding details of my beloved SG Note
Thanks
You can not go from gingerbread to jb.
You need to download an ics rom ,like rocket with root and cwm. Do full wipe. Flash ics rom.
If that's cool download eybees jb
Full wipe and flash that .if root has gone open up SU and update the binary. The app will do this .just press on it .
Do not try skipping the ics . You will brick your phone ! Hope I helped
Sent from the man in Your attic.....
who says you can't go from gb to jb
i was on rooted stock gb and i flashed leaked stock jb over it and everything is working fine..
why do you think that ics has to be flashed ?
infact i did ask here at xda before flashing and nobody told me to flash ics over gb first
itsrijo said:
who says you can't go from gb to jb
i was on rooted stock gb and i flashed leaked stock jb over it and everything is working fine..
why do you think that ics has to be flashed ?
infact i did ask here at xda before flashing and nobody told me to flash ics over gb first
Click to expand...
Click to collapse
Same here. I downgraded to GB yesterday to SIM unlock my phone and went back directly to JB the second it was done.
Safe kernel is the only thing that matters, Rom base has nothing to do with it.
Sent from Nexus 7
You mean guys I can flash directly to any Custom JB ROMs without bricking my beloved Note?
Downloading the RocketRom V1 JB (by Eybee1970 -Thanks!)
Currently, I'm using the AbbysNote 4.2 Kernel I just need to follow this steps below and everything will be fine. Right?
copy ROM on your USB-storage
boot in Recovery
FullWipe (also when coming from other Sammy-JB-ROM!)
Format SYSTEM!!!
flash ROM (it will reboot automatically in most cases)
after initial setup, open Super SU-app and you have to update SU-bin (app will do that for you if necessary!)
*FullWipe - clear cache, clear Dalvik, format system, factory restore?
Thank You..
chasmodo said:
Same here. I downgraded to GB yesterday to SIM unlock my phone and went back directly to JB the second it was done.
Safe kernel is the only thing that matters, Rom base has nothing to do with it.
Sent from Nexus 7
Click to expand...
Click to collapse
Ill dig the quote out
Sent from the man in Your attic.....
howard bamber said:
You can not go from gingerbread to jb..
Click to expand...
Click to collapse
howard bamber said:
Ill dig the quote out
Click to expand...
Click to collapse
No need...its simply not accurate information
Sent from my GT-N7000 using Tapatalk 2
nhivlem said:
You mean guys I can flash directly to any Custom JB ROMs without bricking my beloved Note?
Downloading the RocketRom V1 JB (by Eybee1970 -Thanks!)
Currently, I'm using the AbbysNote 4.2 Kernel I just need to follow this steps below and everything will be fine. Right?
copy ROM on your USB-storage
boot in Recovery
FullWipe (also when coming from other Sammy-JB-ROM!)
Format SYSTEM!!!
flash ROM (it will reboot automatically in most cases)
after initial setup, open Super SU-app and you have to update SU-bin (app will do that for you if necessary!)
*FullWipe - clear cache, clear Dalvik, format system, factory restore?
Thank You..
Click to expand...
Click to collapse
That's correct, all you need is safe kernel.
Sent from my GT-N7000 using xda premium
itsrijo said:
who says you can't go from gb to jb
i was on rooted stock gb and i flashed leaked stock jb over it and everything is working fine..
why do you think that ics has to be flashed ?
infact i did ask here at xda before flashing and nobody told me to flash ics over gb first
Click to expand...
Click to collapse
i agree!! i've done that several times to flash from gb to jb using abyss kernel (just a personal preference); there are other safe kernels to flash from.
Successfully Flashed Custom ROM
From GingerBread 2.3.5 upgrade to Jelly Bean 4.1.1
This is what I've do:
1.Flash Abyss Kernel (Many Thanks to Chasmodo)
2.Reboot CWM Recovery
3. Wipe Data
4. Wipe Cache
5. Mount/System -> Format/System
6. Advance/Wipe Dalvik Cache
7. Wipe Battery Stats
8. Fix Permissions
9. Flash Rom RocketRom V1 - (Many Thanks to Eyebee)
10.Reboot (it will reboot by itself) - wait for at least 2 - 5 mins
Lastly Wait and do the Gangnam style ^_^
Note: you MUST have a safe kernel in performing this.
Many thanks to all the guys who reply to this post
Many thanks to XDA!:good:
Congrats
Back up your EFS now using k-tool
Sent from my GT-N7000 using Tapatalk 2
Thanks for the info - asf58967 :angel:
Backup and verified my EFS done.. :highfive:
flash hydracore kernel with mobile odin or if you can deal with triangle with pc odin and then you can flash whatever you want.
caution. hydracore might not work with this rom
nokiamodeln91 said:
caution. hydracore might not work with this rom
Click to expand...
Click to collapse
Present HydraCore kernels will most certainly NOT work with the JB leak Rom.
My phone running panadroid rom, after wipe data cache and install 4.1.1 rom leak my phone got bootloop. I mean stop at GT 7000 screen or samsung logo or enter the language choice screen then automatic reboot....
Can anybody upload the nandroid backup of 4.1.1 leak. I need it to restore my phone i think that's only way to my phone come up to 4.1.1
Did you tried to reflash the rom?
Or just flash a Safe Kernel like Hydracore first, then full wipes and flash stock ics rom via Odin.
Then reflash Safe Kernel and retry to flash 4.1.1 ROM.
joosh3 said:
Did you tried to reflash the rom?
Or just flash a Safe Kernel like Hydracore first, then full wipes and flash stock ics rom via Odin.
Then reflash Safe Kernel and retry to flash 4.1.1 ROM.
Click to expand...
Click to collapse
Yes i was. But also stop at language choosing screen .
Oh, try to flash another ROM based on XXLS2 Leaked or some custom ROM
Load the *.zip of the ROM on your SD Card and do format /system and all wipes (remember to use safe kernel)
Then flash and i hope it work :crying:
joosh3 said:
Oh, try to flash another ROM based on XXLS2 Leaked or some custom ROM
Load the *.zip of the ROM on your SD Card and do format /system and all wipes (remember to use safe kernel)
Then flash and i hope it work :crying:
Click to expand...
Click to collapse
I haved try alot of custom rom and also stay at language choosing then reboot. I must using nandroid backup to restore to panadroid rom. I thing my devide have problem with flashchip and i need nandroid backup file of 4.1.1 to update to leakrom
Can any body upload your nandroid backup file of 4.1.1 (( Many thankssssssss
That's bad, you never did some Nandroid backup of previous ROM's you used?
If yes try to restore it.
If not im sorry, i don't have what you need :crying:
joosh3 said:
That's bad, you never did some Nandroid backup of previous ROM's you used?
If yes try to restore it.
If not im sorry, i don't have what you need :crying:
Click to expand...
Click to collapse
Yes i have backup of panadroid and restore successfully. But now i can't install JB TW rom anymore
godoflove1988 said:
Yes i have backup of panadroid and restore successfully. But now i can't install JB TW rom anymore
Click to expand...
Click to collapse
The best thing is that your device isn't bricked. Did you tried as i said before? flashing Stock ICS ROM via Odin (not only custom Roms) , then Safe Kernel and start to flash JB ROM from this?
joosh3 said:
The best thing is that your device isn't bricked. Did you tried as i said before? flashing Stock ICS ROM via Odin (not only custom Roms) , then Safe Kernel and start to flash JB ROM from this?
Click to expand...
Click to collapse
Yes i was flash N7000DXLR2_N7000OLBLR1_N7000DXLR1_HOME.tar. And Phil kernel and then stuck at language choosing menu => reboot automatically
godoflove1988 said:
Yes i was flash N7000DXLR2_N7000OLBLR1_N7000DXLR1_HOME.tar. And Phil kernel and then stuck at language choosing menu => reboot automatically
Click to expand...
Click to collapse
Try to flash this one: N7000XXLRQ_N7000DBTLRQ_N7000XXLRK_HOME.tar.md5
You can download it from here: N7000XXLRQ_N7000DBTLRQ_DBT.zip
After download extract it and flash via Odin.
Hope it work (remember safe kernel)
godoflove1988 said:
Yes i was flash N7000DXLR2_N7000OLBLR1_N7000DXLR1_HOME.tar. And Phil kernel and then stuck at language choosing menu => reboot automatically
Click to expand...
Click to collapse
Just boot into Philz recovery and do factory reset. Phone should boot properly after that
Sent from my GT-N7000 using xda app-developers app
This is just a simple ROM I built with dsixda's Android Kitchen. Saw some people requesting a clean, rooted, stock ROM so I started a poll to gauge interest and it was enough for me have a crack at it. It's not really development but I figured this was the best place to drop it.
It's based on the LT30P_9.1.A.1.141_PL.ftf posted by @Supersonic335. I only rooted and deodexed it.
All the usual blah blah about bricking your device applies. It works fine on my phone so it should work on yours.
Features
* STOCK
* ROOT (Chainfire SuperSU 1.25 & BusyBox 1.21.0)
* DEODEXED
Basic flashing instructions
1. Root with Bin4ry's method(*) Make sure to use v21 or later!
2. install CWM for locked bootloaders.(*)
3. Go to recovery and wipe
4. Flash ROM.
5. Flash kernel (**)
6. Flash CWM & Reboot fix (**)
7. Reboot.
8. Enjoy
(*) skip these steps if you already have CWM recovery or unlocked bootlader.
(**)Not for unlocked bootlooader
Download
LT30p_9.1.A.1.141_deodexed.zip
Mirror: http://www.filedropper.com/lt30p91a1141deodexed
LT30p_9.1.A.1.141_Kernel.zip - 6.80 MB
Mirror
Hosting provided by Android File Host & @Phoenix-Lead at AndroidFileSharing.com
previous versions
LT30p_9.1.A.0.489_root_deodexed 2 part download. You need 7-zip to unpack
Kernel: LT30p_9.1.A.0.489_Europe_kernel.ftf - 6.51 MB LT30p_9.1.A.0.489_Kernel.zip - 6.79 MB Thanks to crazymister for the kernel.zip!
LT30p_7.0.A.3.223_CE_root_deodex.zip
LT30p_7.0.A.3.223_CE_kernel.ftf
LT30p_7.0.A.3.195_UK_root_deodexed.zip
Changelog
10/06/13: 9.1.A.1.141
3/2/13: 9.1.A.0.489 Europe, updated SuperSU, fixed wifi mac address
13/12/12: 7.0.A.3.223 Central Europe; changed superuser.apk from ChainsDD Superuser to Chainfire SuperSU
3/12/12: 7.0.A.3.195 UK generic
Like it? Don't forget to hit Thanks!
This is the first thing I've ever put out so please give me some feedback.
Credits go to dsixda for the Kitchen, ChainsDD for Superuser, Chainfire for SuperSU, Androxyde for Flashtool, Bin4ry for Flashtool & Root method, batman_112, jozinek and Sharaz22 for the stock firmwares and last, but definitely not least, gregbradley for the awesome All in One thread, inspiration and help. And of course, anyone I may have forgotten.
Well done, I will link to the all in one thread
"6. Flash cwm&reboot fix"
Guys, please, where can i get flashable CWM from CWM & reboot fix?
Sent from my LT30p using xda app-developers app
DennisDD78 said:
"6. Flash cwm&reboot fix"
Guys, please, where can i get flashable CWM from CWM & reboot fix?
Sent from my LT30p using xda app-developers app
Click to expand...
Click to collapse
here
Meelouw said:
here
Click to expand...
Click to collapse
Which is the same link as under
3. install CWM for locked bootloaders.
Click to expand...
Click to collapse
You lose CWM after the flash because it's not in the kernel image as it is in a custom kernel.
The reboot fix has to do with the ric file which causes reboots when trying to access /system as r/w iirc.
I'm going to be testing a build now which has CWM and the reboot fix integrated and also a different fix for the "missing" wlan driver.
TiMiN8R said:
Which is the same link as under
You lose CWM after the flash because it's not in the kernel image as it is in a custom kernel.
The reboot fix has to do with the ric file which causes reboots when trying to access /system as r/w iirc.
I'm going to be testing a build now which has CWM and the reboot fix integrated and also a different fix for the "missing" wlan driver.
Click to expand...
Click to collapse
OK, all the sequence again from the beginning.
1. I flash stock 303 rom
2. Rooting it, installing CWM via usb debugging mode.
3. Entering recovery, flashing rom (recovery after flashing rom is still exists, isn`t it?)
4. Then i flash what ? CWM or reboot fix ? I suppose fix, because CWM will be still availiuble!?
So, what for to flash CWM form CWM? If i will lose CWM i still can flash new CWM from installed new .195 rom via debugging mode, isn`t it ? Or i don`t get something at all ? ((
You need to flash both CWM and reboot fix. After reboot CWM will be gone. It is actually in a ramdisk while in recovery. The recovery.tar which holds it is in /system/bin and is flashed over on update. That's why you need to flash it again. You should be able to install it again from. 195 but it's just easier to do it while you're already in recovery. It doesn't matter which of the two you flash first.
Sent from my LT30p using xda app-developers app
TiMiN8R said:
You need to flash both CWM and reboot fix. After reboot CWM will be gone. It is actually in a ramdisk while in recovery. The recovery.tar which holds it is in /system/bin and is flashed over on update. That's why you need to flash it again. You should be able to install it again from. 195 but it's just easier to do it while you're already in recovery. It doesn't matter which of the two you flash first.
Sent from my LT30p using xda app-developers app
Click to expand...
Click to collapse
All clear, thank you!
Will try to do it today.
Just flashed the rom, CWM and fix, everything passed just great, everything works..., what can i say, i`m happy! Thank you so much for your work.
But one thing, you didn`t make changes in kernel ? It`s strange, because the kernel in this .195 f/w is dated by jule, however this kernel was in old .303 f/w and in the new .195 f/w there must be new kernel dated by september, what do you say ? And i see changed file sysmon.cfg respondable for CPU frequency control and LCD brightness. In the old f/w i was changing values by myself as i want LCD brightness, and i see this file has an another values than in old .303 f/w. Does it you made changed or this was in stock ?
---------- Post added at 02:01 AM ---------- Previous post was at 01:03 AM ----------
Was trying to switch on extended battery safe mode, got reboot, and now system is booting till home screen and then reboot again and again
Found a solution to fix this problem, will try...
TiMiN8R said:
This is just a simple ROM I built with dsixda's Android Kitchen.
Basic flashing instructions
Locked bootlader
1. Flash stock .303 FTF from the All-in-One thread with flashtool
2. Root with Bin4ry's method
3. install CWM for locked bootloaders.
4. Go to recovery and wipe
5. Flash ROM.
6. Flash CWM & Reboot fix
7. Enjoy
Click to expand...
Click to collapse
You should add to instruction, that after all need to flash via Flashtool stock kernel from .195 f/w from here
http://www.mediafire.com/?2b75t7dpk72z12h
Otherwise there will be bootloop after switching on extended battery mode. I flashed, and everithing is OK
DennisDD78 said:
You should add to instruction, that after all need to flash via Flashtool stock kernel from .195 f/w from here
http://www.mediafire.com/?2b75t7dpk72z12h
Otherwise there will be bootloop after switching on extended battery mode. I flashed, and everithing is OK
Click to expand...
Click to collapse
My bad. I've fixed the instructions. Glad to see you figured it out by yourself!
Hi.
If I am on other custom Rom with LB, do you thing that I will be flash directly your Rom step by step, without 1step/flash. 303 stock Rom/, without problem?
Sent from my LT30p using xda premium
If you are already on a custom .195 and have working cwm recovery you can flash it directly. I do advise to wipe, you can make a backup up your apps with Titanium backup.
Sent from my LT30p using xda app-developers app
Now that 7.0.A.3.223 is out, ¿any chance of getting an updated version of your rom?.
I like deodexed stock ones with as little modifications as possible, so I can customize them to my likes.
And so far yours has been great (except I switched SuperUser for SuperSU).
Arcano said:
Now that 7.0.A.3.223 is out, ¿any chance of getting an updated version of your rom?.
I like deodexed stock ones with as little modifications as possible, so I can customize them to my likes.
And so far yours has been great (except I switched SuperUser for SuperSU).
Click to expand...
Click to collapse
Done.
TiMiN8R said:
Done.
Click to expand...
Click to collapse
¡Wow, that was fast!. Thank you very much.
I am on CM 10 (JB 4.1.2) but would like to come back to Stock ROM. What kernel do you recommend?
Thanks,
Mugur
http://mugur-ionescu.ro/tag/xperia
imugur said:
I am on CM 10 (JB 4.1.2) but would like to come back to Stock ROM. What kernel do you recommend?
Thanks,
Mugur
http://mugur-ionescu.ro/tag/xperia
Click to expand...
Click to collapse
I've been using Siyah kernel with rom 3.195 and I'm very satisfied with it.
(There's a report that version 0.2 doesn't work with latest rom (3.223), but I know a user in another forum who says it is working fine for him, so who knows. Either way I'm waiting to see if Gokhanmoral releases kernel 0.3 before I update to rom 3.223).
¿Deodexed?
I've tried to customize the status bar icons with Rom Toolbox, but it complains that this rom is not deodexed (and in fact changing the icons does not work).
But this rom is supposed to be deodexed so, ¿does anybody know why this happens?.
Arcano said:
I've tried to customize the status bar icons with Rom Toolbox, but it complains that this rom is not deodexed (and in fact changing the icons does not work).
But this rom is supposed to be deodexed so, ¿does anybody know why this happens?.
Click to expand...
Click to collapse
Yes, it's deodexed, except for playstationcertified but that shouldn't matter. I'm not familiar with Rom Toolbox so I can't help you there.
Hi,
I am currently on rooted 2.3.6 Gingerbread (I9070) and will upgrade to the JellyMOD (http://forum.xda-developers.com/showthread.php?t=2170925).
I've been advised to do a Nandroid Backup of my system via the recovery menu (Volume up+Home+Power button) before I upgrade.
I did this but the option for Backup doesn't appear.
After a quick research I installed Rom Manager via google play. Tried to install ClockworkMod Recovery via Rom Manager but it says my I9070 is not supported.
I'm a noob here and hope someone can help in getting the Backup section to show up in recovery mode.
Thanks.
Note: In about phone it shows:
Baseband version: I9070XXLD1
Kernel version: 2.6.35.7-I9070XXLD1-CL1067329 [email protected] #2
Build number: GINGERBREAD.XXLD1
skatlyup said:
Hi,
I am currently on rooted 2.3.6 Gingerbread (I9070) and will upgrade to the JellyMOD (http://forum.xda-developers.com/showthread.php?t=2170925).
I've been advised to do a Nandroid Backup of my system via the recovery menu (Volume up+Home+Power button) before I upgrade.
I did this but the option for Backup doesn't appear.
After a quick research I installed Rom Manager via google play. Tried to install ClockworkMod Recovery via Rom Manager but it says my I9070 is not supported.
I'm a noob here and hope someone can help in getting the Backup section to show up in recovery mode.
Thanks.
Note: In about phone it shows:
Baseband version: I9070XXLD1
Kernel version: 2.6.35.7-I9070XXLD1-CL1067329 [email protected] #2
Build number: GINGERBREAD.XXLD1
Click to expand...
Click to collapse
1. You instaled Jelly Bean ROM on Gingerbread. If you want it you need to flash JB with Odin, you have guide here - search for it.
2. We only can use custom recovery that is instaled with kernel, because those two share same partition. So no other way to install it, like on some other phones.
3. You probably got bootloop after installing JellyMOD on GB, so I suggest you to flash GB again. Or JB if you want it.
4. After geting back to GB, you can go get that recovery back and restore your prevoius ROM.
shut_down said:
1. You instaled Jelly Bean ROM on Gingerbread. If you want it you need to flash JB with Odin, you have guide here - search for it.
2. We only can use custom recovery that is instaled with kernel, because those two share same partition. So no other way to install it, like on some other phones.
3. You probably got bootloop after installing JellyMOD on GB, so I suggest you to flash GB again. Or JB if you want it.
4. After geting back to GB, you can go get that recovery back and restore your prevoius ROM.
Click to expand...
Click to collapse
Thanks for the reply but I think you may have misunderstood.
I haven't installed JB YET, so I am STILL on Gingerbread.
Any options I have?
skatlyup said:
Thanks for the reply but I think you may have misunderstood.
I haven't installed JB YET, so I am STILL on Gingerbread.
Any options I have?
Click to expand...
Click to collapse
I was tired. I read that you instaled JellyMOD. You have stock recovery, it do not have backup. You need to root, and to install kernel with TWRP. Look for it in dev section of our phone. If you want Jelly MOD you need to flash JB with Odin.
Послато са GT-I9070 користећи Тапаток 2
shut_down said:
I was tired. I read that you instaled JellyMOD. You have stock recovery, it do not have backup. You need to root, and to install kernel with TWRP. Look for it in dev section of our phone. If you want Jelly MOD you need to flash JB with Odin.
Послато са GT-I9070 користећи Тапаток 2
Click to expand...
Click to collapse
Since my phone is already rooted is it ok just to install the kernel?
After a search I found this [GT-I9070][Kernel][GINGERBREAD] Stock Kernel + TWRP Recovery for Galaxy S Advance (http://forum.xda-developers.com/showthread.php?t=1873119&highlight=kernel+gingerbread).
Would it be ok to just install this via Odin?
Not with odin but yes, that is what you need. Get universal kernel flasher and use that tool to flash kernels. Odin way will increase binary counter.
Sent from my GT-I9070 using xda app-developers app
Thanks for your replies.
I managed to install the kernel now and backup my phone.
skatlyup said:
Hi,
I am currently on rooted 2.3.6 Gingerbread (I9070) and will upgrade to the JellyMOD (http://forum.xda-developers.com/showthread.php?t=2170925).
I've been advised to do a Nandroid Backup of my system via the recovery menu (Volume up+Home+Power button) before I upgrade.
I did this but the option for Backup doesn't appear.
After a quick research I installed Rom Manager via google play. Tried to install ClockworkMod Recovery via Rom Manager but it says my I9070 is not supported.
I'm a noob here and hope someone can help in getting the Backup section to show up in recovery mode.
Thanks.
Note: In about phone it shows:
Baseband version: I9070XXLD1
Kernel version: 2.6.35.7-I9070XXLD1-CL1067329 [email protected] #2
Build number: GINGERBREAD.XXLD1
Click to expand...
Click to collapse
JellyMod is base on JellyBean offical rom so it can't install from Gingerbread you have to update to jellybean with Kies or flash it with odin. Then get to recovery mode flash CWM and do what you want like root or flash kernel or Jellymid
Sirry for my english
Hey guys.
I currently have open bootloader and I'm with the firmware Ultimate PureXT v4.0 (4.3 JB) and therefore my disposal Recovery (Philz Touch 6 / CW v6.0.4.7).
The question is, if I just go directly to flash the firmware, with subsequent wipes, or previously have to flash a kernel via flashtools.
In case i need to flash a kernel through flashtools, what use, which is within the firmware or that recommend me?
I feel my bad English
Please can anyone answer? I do not dare to flash directly from recovery, without being certain not brik the terminal, not to have a different kernel that I have.
http://forum.xda-developers.com/showthread.php?t=2729509
You mean to install the above linked ROM? Since you already have recovery installed, you can indeed use that for flashing the ROM, no need to flash an other kernel first.
It's always a good idea to make a backup of your current ROM first, so:
- backup
- full wipe (everything except SD)
- flash ROM from SD
- reboot
Sent from my LT30p using XDA Free mobile app
Mad Marty said:
http://forum.xda-developers.com/showthread.php?t=2729509
You mean to install the above linked ROM? Since you already have recovery installed, you can indeed use that for flashing the ROM, no need to flash an other kernel first.
It's always a good idea to make a backup of your current ROM first, so:
- backup
- full wipe (everything except SD)
- flash ROM from SD
- reboot
Sent from my LT30p using XDA Free mobile app
Click to expand...
Click to collapse
Many, thank you very much! It is exactly that.
That was my question, the difference in the systems and whether to flash a new kernel, to install the new firmware recovery
As I'm on 4.3 JB not know if I can flash this firmware directly from the recovery going from 4.3 to 4.4 while maintaining kernel 4.3
When you full wipe from recovery, everything is gone from your phone (including kernel), so just immediately flash the zip after wiping to install the new ROM (new kernel is then installed, you won't end up with 4.4 firmware with 4.3 kernel )
Sent from my LT30p using XDA Free mobile app
Mad Marty said:
When you full wipe from recovery, everything is gone from your phone (including kernel), so just immediately flash the zip after wiping to install the new ROM (new kernel is then installed, you won't end up with 4.4 firmware with 4.3 kernel )
Sent from my LT30p using XDA Free mobile app
Click to expand...
Click to collapse
Thank you very much. :good:
I always thought you had to change kernel if the system is updated, or wanted a firmware cooked