Related
I burned it to my SD card, botted the NC with it inside and all I get is a clock and a message asking for a password to decrypt the drive. Anyone know what the password is? I can't find any posts anywhere with a password mentioned and I have to ask here because I don't have enough posts to actually ask in the development thread where this likely belongs.
You did it wrong. Try downloading, extracting and burning again. Mine is running great.
Yeah, you did something wrong. I booted it up and it looks sweet. Not a daily driver, but a very, very nice proof of concept.
I just got mine running, after giving up on it last night. I was having problems where initially winimage wouldn't even see my sd card. Then I tried in Ubuntu following the directions on the dev link, and I must have been doing something wrong, it didn't work. Tried again with winimage today and it worked this time. If you have a problem still, leave a description of your method here. It seems like this can be a finicky process for us noobs.
Doesn't it figure, right after I get this working they release an update to the .img.
I'm pretty sure it's the sd card. I'm using a 32gig class 10. I went to switch it with the 16 gig card in my vibrant and I can't even get it to work right in the phone.
Honeycomb assumes that if it fails to mount the partition for /data that the partition must be encrypted, and therefore it should prompt for a password.
So, you have a partition that won't mount, possibly due to an error writing the image to the sdcard. Either redo the image or if you have a linux machine, reformat the partition.
n25philly said:
I'm pretty sure it's the sd card. I'm using a 32gig class 10. I went to switch it with the 16 gig card in my vibrant and I can't even get it to work right in the phone.
Click to expand...
Click to collapse
If you placed a disk image on the card then it probably is in a format that your phone doesn't like now. You'll need to reformat it, which I find the easiest way to do this is to start your nookcolor up on the stock os, then insert the card and wait for it to prompt you to format it. That should make your 32Gb card play nice with the phone again.
Balls_Mcafee said:
If you placed a disk image on the card then it probably is in a format that your phone doesn't like now. You'll need to reformat it, which I find the easiest way to do this is to start your nookcolor up on the stock os, then insert the card and wait for it to prompt you to format it. That should make your 32Gb card play nice with the phone again.
Click to expand...
Click to collapse
No, I did reformat it before I put it in. Turns out the Vibrant only supports SD cards up to 16 gig in size. It was definitely an issue with the SD card. Ran over to Best Buy on my way home from work and picked up an 8gig class 4 card (for a ridiculous price, Best Buys my ass) and was able to get Honeycomb up and running in less than 15 minutes. Would have preferred the faster card, but I guess I'll just have to send the 32 gig card back.
n25philly said:
No, I did reformat it before I put it in. Turns out the Vibrant only supports SD cards up to 16 gig in size. It was definitely an issue with the SD card. Ran over to Best Buy on my way home from work and picked up an 8gig class 4 card (for a ridiculous price, Best Buys my ass) and was able to get Honeycomb up and running in less than 15 minutes. Would have preferred the faster card, but I guess I'll just have to send the 32 gig card back.
Click to expand...
Click to collapse
Ok, I was completely unaware that the Vibrant didn't take sd>16Gb. My G2 takes up to 32, so I didn't consider it. But that doesn't mean your 32Gb card is bad. The nookcolor can use a card of that size. How did you reformat it? If you're using windows and you went to format it from the file explorer,that may not have done it, that never works for me.
Just to clarify things, when you guys refer to "SD card," you're talking about a Micro SD card, right?
I want to make sure I buy the right thing for when I purchase my NC.
Yeah, definitely microsd
Mine's running just fine running on a class 4 4gb card. I used my mac to just dd the image onto the card and it fit without a problem, so maybe if you format in linux (download and burn a live cd of gparted if you have to) you can get something that will work best. Also, don't forget to get the newest version of windiskimager (it seems like it's the only thing that works on windows so far).
It's not quite usable for everyday, but once things get worked out it's definitely worth dedicating to eMMC =D
can some one help me out with the process of installing honeybunches
is this just a preview of honeycomb?
can i just put it on my nook to look around play with, THEN go back my usual set up?
if so how?
Download the zip file from the post in the Dev section, then write it to a uSD card that is AT LEAST 4gb (using either dd in linux/mac terminal or the latest win32diskimager). Shut off your NC and load in the card. When you turn it back on it will run the Honeycomb image from the card - no changes made to your NC!
When you want to go back, just turn off, take out card, then reboot. Right now there aren't many things working on it (you have to install the market yourself, and then most apps don't work). But it is a beautiful proof of concept. You can play around in it a bit to familiarise yourself with the new stuff without hurting your NC (theoretically, don't hold me to it if something does go wrong).
Good luck!
Got a NC a few weeks ago, rooted, and running well, but clearly not optimal.
Saw the google presentation of honeycomb today, and clearly this is what tablets need.
Do you all (those who do development) believe that the current NC is a candidate for a real version of honeycomb once it it fully released, and that it can be ported, or is the HW not adequate for it. In other words, should I be thinking my NC can be my tablet in June, or am I going to have to purchase another 'real' tablet that officially has honeycomb?
jbinbi said:
Got a NC a few weeks ago, rooted, and running well, but clearly not optimal.
Saw the google presentation of honeycomb today, and clearly this is what tablets need.
Do you all (those who do development) believe that the current NC is a candidate for a real version of honeycomb once it it fully released, and that it can be ported, or is the HW not adequate for it. In other words, should I be thinking my NC can be my tablet in June, or am I going to have to purchase another 'real' tablet that officially has honeycomb?
Click to expand...
Click to collapse
The mere fact that Honeycomb runs in it's current state is proof enough. And, it does run well for being literaly a ported code preview, also I'm sure all of the hardware acceleration and what nots are driverless and drunk. TBH it's really only going to go up from here. As soon as CWM and nookie froyo play nice everyone and their brother will be putting out custom images. Then we'll have finished honeycomb ports to look forward to.
I completely agree with woot1524, cyanogenmod won't work on this demo version of honeycomb, but once the release is official they'll whip up a rom that makes this a legit tablet. Personally I'll wait until that happens before I flash anything onto the device. I'd rather have 3.0 on my nook than 2.2 or 2.3, just for the fact that it's geared toward tablets, but there is a lot of chatter about CM7 coming to the nook sooner than later.
"Honeybunches", a custom version of deeper-blue's work, has a 2GB image.I'm currently running it off of a 2GB Class 2 microSD and it's pretty darn speedy.
Has anyone noticed any performance issues with different class SD Cards?
Is there a significant difference in speed between a class 6 (I have) and a class 10 (I do not have)?
Is there any difference in performance using any class card - 2,4,6 or 10?
Also, Has anyone been able to DL and run the B&N Nook App without causing a FC?
-NJ
Using cm7, I find many issues stem from apps trying to read from SD. is there a way to resize emmc to a smaller size and increase the size of internal storage? or are they on a seperate physical storage?
Thanks
If I understand correctly, what you are asking is it is possible to have CM see the WHOLE 5 GB as internal storage, rather than .998 GB and a mount point at /mnt/emmc?
Sent from my NookColor using XDA Premium App
deadbot1 said:
If I understand correctly, what you are asking is it is possible to have CM see the WHOLE 5 GB as internal storage, rather than .998 TB and a mount point at /mnt/emmc?
Sent from my NookColor using XDA Premium App
Click to expand...
Click to collapse
well i would like to know that.
Agreed. This would make a lot of things work nicer, if not better. The Nook app comes to mind first off. Lots of apps can't t see that mount point at /mnt/emmc.
Sent from my NookColor using XDA Premium App
deadbot1 said:
Agreed. This would make a lot of things work nicer, if not better. The Nook app comes to mind first off. Lots of apps can't t see that mount point at /mnt/emmc.
Sent from my NookColor using XDA Premium App
Click to expand...
Click to collapse
Could it be that the apps are written to store data to the mount point /sdcard?
There is a app in the developers area to swap /mnt/emmc and /sdcard. http://forum.xda-developers.com/showthread.php?t=1034939
I have not tried it so can not tell you how it works.
painter_ said:
Could it be that the apps are written to store data to the mount point /sdcard?
There is a app in the developers area to swap /mnt/emmc and /sdcard. http://forum.xda-developers.com/showthread.php?t=1034939
I have not tried it so can not tell you how it works.
Click to expand...
Click to collapse
Yep, already looked at that...defeats the purpose of the idea...to get access to the FULL capacity...of BOTH the internal and SD card.
Sent from my NookColor using XDA Premium App
deadbot1 said:
Yep, already looked at that...defeats the purpose of the idea...to get access to the FULL capacity...of BOTH the internal and SD card.
Sent from my NookColor using XDA Premium App
Click to expand...
Click to collapse
Let me get this right, you want to join the capacity of the emmc and the sdcard as one mount point. Like a strip set?
I do not think that it would wise or even possible.
painter_ said:
Let me get this right, you want to join the capacity of the emmc and the sdcard as one mount point. Like a strip set?
I do not think that it would wise or even possible.
Click to expand...
Click to collapse
i would like to know if its possible to use all the 5 gigs for apps and stuff.
painter_ said:
Let me get this right, you want to join the capacity of the emmc and the sdcard as one mount point. Like a strip set?
I do not think that it would wise or even possible.
Click to expand...
Click to collapse
No, no. If you look at the way that CM7 uses the EMMC card on board it "splits" it into storage(the way a phone sees it in android) and a mount point that is like an SD card. The problem with this is that some apps are poorly written and can't see that mount point at /mnt/emmc. So you end up with certain apps not being able to access roughly 4 gigs of onboard storage.
The sdcard is seperate and handled correctly.
What the idea is here is to get the "phone storage" size to be the whole emmc and not just.92Gb(some limitation of android/CM7?). So you would end up when you look at the storage option in CM with Internal storage reading something like 4.9 gig instead of .92 gig and have no mount point at /mnt/emmc. All apps should be able to see the full capacity of the EMMC card and the external SD card this way.
Edit: sorry if I seem to ave threadjacked you electrikjesus. You just asked a VERY good question.
I would be happy even if there was a nice way to mount the emmc as /sdcard and then mount the actual external sd card as /sdcard/external_sd, similar to how my Captivate handles is. This would at least allow both to be access by all applications, and not just those few that will allow you to access parts of the filesystem besides /sdcard. Is there any reason fstab couldn't be modified to this?
deadbot1 said:
No, no. If you look at the way that CM7 uses the EMMC card on board it "splits" it into storage(the way a phone sees it in android) and a mount point that is like an SD card. The problem with this is that some apps are poorly written and can't see that mount point at /mnt/emmc. So you end up with certain apps not being able to access roughly 4 gigs of onboard storage.
The sdcard is seperate and handled correctly.
What the idea is here is to get the "phone storage" size to be the whole emmc and not just.92Gb(some limitation of android/CM7?). So you would end up when you look at the storage option in CM with Internal storage reading something like 4.9 gig instead of .92 gig and have no mount point at /mnt/emmc. All apps should be able to see the full capacity of the EMMC card and the external SD card this way.
Edit: sorry if I seem to ave threadjacked you electrikjesus. You just asked a VERY good question.
Click to expand...
Click to collapse
I figured that you all would pretty much take it from here You know exactly what I was asking. Currently EMMC is a huge waste of usable space even if I resize it for DualBoot, I still have a good 2gb left over that could be used to increase the internal storage of my Daily CM7. I use the DB for honeycomb tests.
Sent from my NookColor
Yep, I understand it perfectly...just never would have thought of actually asking about it
anywho...heres hoping that one of the devs or someone with some knowledge of the subject will chime in.
bump bumpty bump. Did we get lost in the 1.2 flood or what?
Really would like to see this happen as well, as it's kind of silly to have such a low amt of space for Apps and then a bunch of space kind of hidden that some may never even know about.
couldnt agree more - bumping my apps to the sdcard is a pain - Id like to have that unwasted /emmc 5 gig slice for something..
I have been looking everywhere to find an answer to this very question. Would love that extra space for apps and what not.
I use emmc to store all my music. Then point my music app to that partition. PowerAmp sees it just fine and I have the rest of my partitions freed up for more important things. Call me silly but I thought that is what it was for, to store data.
12paq said:
I use emmc to store all my music. Then point my music app to that partition. PowerAmp sees it just fine and I have the rest of my partitions freed up for more important things. Call me silly but I thought that is what it was for, to store data.
Click to expand...
Click to collapse
12paq, this is exactly how I want to roll....I want my music on the 5Gb EMMC partition. I have PowerAmp already loaded. What is the best way to transfer my music from my PC to the EMCC of my NC?
EDIT: Nvm....figured it out...easier than I originally thought.
12paq said:
I use emmc to store all my music. Then point my music app to that partition. PowerAmp sees it just fine and I have the rest of my partitions freed up for more important things. Call me silly but I thought that is what it was for, to store data.
Click to expand...
Click to collapse
Nope..you are both getting and missing the point. What if I want to store epubs there and my reader app of choice can't see anything but the "internal" storage or SD card. That's roughly 4 gigs of unusable space for me then. It would seem to me that from a compatability standpoint, getting all this to be seen as "internal storage" would be optimal.
Some apps just can't see that mount point, mostly those that were designed with typical phone setups in mind.
Sent from my NookColor using XDA Premium App
I understand what you're saying... maybe we could start a bounty for resizing emmc for more app storage?
Sent from my HTC HD2 using XDA App
Saw the story on Engadget, but not seeing any mention of it here besides them saying thanks to XDA for "the dual boot script".
Which joker is selling CM7 this time?
I wish it was me, but I have more decency than that.
I just feel like he should AT LEAST lower the prices. $35 for an 8GB stick? That's crazy. $90 for a 32GB is a pretty good deal though. I know some places still sell those for $100+
DiscoPh3v3r said:
$90 for a 32GB is a pretty good deal though.
Click to expand...
Click to collapse
buy has them for $60 ( from what it looks like on the website, not through a reseller, and they are a "authorized sandisk reseller", so i would think they are legit)
newegg has then for $80, closer to that $90 price-tag...
I've posted a review on his Amazon selling page, but I bet the review won't be published.
Douchebaggery.
Dave Vinzant
[address left out intentionally.. ]
http://www.linkedin.com/pub/dave-vinzant/25/893/6b6
He works in the Geek Squad........ hahaahaahahaaha
He plays with legos.. Lives with his parents.
And this differs from the ebay auctions I have seen , how?
Installing CM7 to an SD card is rather easy and now with the dual boot script, it makes switching between the stock os and CM7 pretty easy. Why someone would pay for free is beyond me.
Temetka said:
And this differs from the ebay auctions I have seen , how?
Installing CM7 to an SD card is rather easy and now with the dual boot script, it makes switching between the stock os and CM7 pretty easy. Why someone would pay for free is beyond me.
Click to expand...
Click to collapse
One word: lazy. Or maybe just not tech savvy.
Sent from my NookColor using XDA Premium App
I routely see Craigslistings in my area of people offering prebuilt dualbooting ROMs for $50.
A little sad if you ask me.
DIY for a technological half-wit
After reading the story in Engadget yesterday about converting the Nook Color into an Android tablet, I made up my mind to buy the Nook and the Nook2Android conversion card. Then I began seeing comments by readers about Nook2Android actually using technology developed by XDA and making money off freeware in which they had no role developing.
I make my living as a writer so I'm sensitive to matters such as copyrights, giving credit where credit is due, and being screwed over by plagiarizers.
As I sort through the forums here, however, about converting the Nook Color to an all-purpose tablet, I realize my vocabulary is incredibly limited. Reading about CM7, for example, really doesn't make it any more clear to me whether I should use that to make the conversion. Or is it Froyo? What's the difference?
My real question, I suppose, is this: what do I as an unsavvy technophobe need to do to convert a Nook Color to a dual-boot Android-based tablet?
Advice gratefully accepted and flames gracefully borne.
Unsavvy_technophobe said:
After reading the story in Engadget yesterday about converting the Nook Color into an Android tablet, I made up my mind to buy the Nook and the Nook2Android conversion card. Then I began seeing comments by readers about Nook2Android actually using technology developed by XDA and making money off freeware in which they had no role developing.
I make my living as a writer so I'm sensitive to matters such as copyrights, giving credit where credit is due, and being screwed over by plagiarizers.
As I sort through the forums here, however, about converting the Nook Color to an all-purpose tablet, I realize my vocabulary is incredibly limited. Reading about CM7, for example, really doesn't make it any more clear to me whether I should use that to make the conversion. Or is it Froyo? What's the difference?
My real question, I suppose, is this: what do I as an unsavvy technophobe need to do to convert a Nook Color to a dual-boot Android-based tablet?
Advice gratefully accepted and flames gracefully borne.
Click to expand...
Click to collapse
Here you go, this is about as un-tech savvy as it can get http://wiki.cyanogenmod.com/wiki/Barnes_&_Noble_Nook_Color:_Full_Update_Guide
Basically you burn an .img file to a microsd card, put the card in, boot up your nook, launch an app called Rom Manager, click "install clockworkmod," click "install cm7," and you're done
Update: this method is NOT dual boot though, sorry I missed that you wanted that
Posted from my OSBB 9650
Unsavvy_technophobe said:
After reading the story in Engadget yesterday about converting the Nook Color into an Android tablet, I made up my mind to buy the Nook and the Nook2Android conversion card. Then I began seeing comments by readers about Nook2Android actually using technology developed by XDA and making money off freeware in which they had no role developing.
I make my living as a writer so I'm sensitive to matters such as copyrights, giving credit where credit is due, and being screwed over by plagiarizers.
As I sort through the forums here, however, about converting the Nook Color to an all-purpose tablet, I realize my vocabulary is incredibly limited. Reading about CM7, for example, really doesn't make it any more clear to me whether I should use that to make the conversion. Or is it Froyo? What's the difference?
My real question, I suppose, is this: what do I as an unsavvy technophobe need to do to convert a Nook Color to a dual-boot Android-based tablet?
Advice gratefully accepted and flames gracefully borne.
Click to expand...
Click to collapse
Appreciate you taking the time to get the real story as well as your honesty! There's multiple ways to do things, the closest way is using an image by user verygreen on this thread: http://forum.xda-developers.com/showthread.php?t=1000957
Post in that thread with any questions, and good luck! Just need to use the right program and have a card reader and it shouldn't be any problem.
Thanks very much! I've been going through the Cyanogen site, as well. The wiki link and XDA link are enormously helpful.
Unsavvy_technophobe said:
After reading the story in Engadget yesterday about converting the Nook Color into an Android tablet, I made up my mind to buy the Nook and the Nook2Android conversion card. Then I began seeing comments by readers about Nook2Android actually using technology developed by XDA and making money off freeware in which they had no role developing.
I make my living as a writer so I'm sensitive to matters such as copyrights, giving credit where credit is due, and being screwed over by plagiarizers.
As I sort through the forums here, however, about converting the Nook Color to an all-purpose tablet, I realize my vocabulary is incredibly limited. Reading about CM7, for example, really doesn't make it any more clear to me whether I should use that to make the conversion. Or is it Froyo? What's the difference?
My real question, I suppose, is this: what do I as an unsavvy technophobe need to do to convert a Nook Color to a dual-boot Android-based tablet?
Advice gratefully accepted and flames gracefully borne.
Click to expand...
Click to collapse
Wisdom gathered from sifting through XDA Nook Forums:
Try out a rock solid version of CM7 on the nook with no strings, as in doesn't touch the internal programming of the device.
You need a MicroSD card, and you should make sure it is a SanDisk brand card. 4 gig or better, I recommend 8 or 16.
1 - Download the image at this XDA thread.
2 - Download and install WinImage if windows, not sure the mac equivalent. Get version 8.1
3 - Burn the image to your SanDisk MicroSD card using WinImage.
4 - Download and install EASEUS Partition Manager.
5 - Use EASEUS to extend the last partition on the MicroSD card to fill all the unused space. Amount unused depends on the MicroSD card size.
6 - Insert MicroSD card to powered off Nook. For best results ensure a full battery charge.
7 - Power on the Nook, leave it alone until it fully boots. The boot animation will skip a bit, this is normal.
8 - After booting, don't touch anything until the screen times out. It needs to finish installing a lot of stuff on the MicroSD card, but you won't see this happening. Give it time to settle.
9 - Very important: tap the google market icon on the main desktop, and set up your google market account. If you delete this icon before you do, you may have to re-image the card to get it back.
10 - Go to the market, and download the app "SD Speed Increase" by Diego Stamigni. It's a free app. Run it and set the slider to 2048, make sure it'll run on every boot. Set the setting, and make sure to grant it superuser permissions.
11 - Enjoy!
It'd be nice if somebody doing this would at least donate some of the profits to the ROM creator so both could pocket a few bucks
So, I've been trying to follow your directions but no matter what I do, WinImage simply will not write the image. I've tried it to a 4 and 16GB Kingston MicroSD, I've tried it to a Microcenter MicroSD 4GB, and I've tried it to a brand new, just opened Sandisk 4GB MicroSD. All fail with an unspecified error, simply a red X in a box using the 32 bit version of Winimage on Windows 7 Home Premium x64.
AHA! I hear you say, "Use the 64 bit WinImage!" I thought so too, and tried it. It insists that the file is "open for reading by another program," even after a reboot. It says the same thing on 3 different SD card ROMS I downloaded.
Any ideas? Is there an alternative to WinImage (it seems somewhat half-baked).
Thanks!
It sounds like you are getting closer with the 64-bit version.. I had a hell of a time with the "file is open for reading" error as well, but a reboot always cleared mine up.
Not sure what else you could try... Maybe there is some windows service or "minimized" app that would have the file open for any reason? Just guessing at this point....
jasongw said:
So, I've been trying to follow your directions but no matter what I do, WinImage simply will not write the image. I've tried it to a 4 and 16GB Kingston MicroSD, I've tried it to a Microcenter MicroSD 4GB, and I've tried it to a brand new, just opened Sandisk 4GB MicroSD. All fail with an unspecified error, simply a red X in a box using the 32 bit version of Winimage on Windows 7 Home Premium x64.
AHA! I hear you say, "Use the 64 bit WinImage!" I thought so too, and tried it. It insists that the file is "open for reading by another program," even after a reboot. It says the same thing on 3 different SD card ROMS I downloaded.
Any ideas? Is there an alternative to WinImage (it seems somewhat half-baked).
Thanks!
Click to expand...
Click to collapse
I've never used a 64-bit operating system, so keep that in mind.
People who don't like winimage generally use Win32 Disk Imager
Good luck
Edit:
Sorry accidentally this was submitted, phone in my pocket.
No relation to this post whatsoever.
Sent from my phone
TCAndroid said:
People who don't like winimage generally use Win32 Disk Imager
Click to expand...
Click to collapse
Just as an FYI, I use this app on my Win7 x64 and it works perfectly. So don't let the "32" scare you away.
I've had no issues with WinImage on Windows 7 64-bit.
From my F!AQ:
F! I can't find and/or write the disk image in WinImage!
The command to write the image is Disk>Restore Virtual Hard Disk Image on Physical Drive. You will have to show file type All Files every time in order to find the .img file.
Click to expand...
Click to collapse
I would definitely recommend verygreen's image and method over the one Blue mentioned.
So, I just got myself a 64GB MicroSDXC from SanDisk to use in my Xperia T as storage for some movies. I planned on formatting it in EXT2/EXT3/EXT4 or EXFAT so I can store files bigger than 4GB on this.
But... turns out the Xperia T won't read anything but FAT32. I can use the full capacity just fine and it works perfectly, but you're stuck if you want to load anything bigger than 4GB since FAT32 can't handle it.
Sort of sucks.
Ambroos said:
So, I just got myself a 64GB MicroSDXC from SanDisk to use in my Xperia T as storage for some movies. I planned on formatting it in EXT2/EXT3/EXT4 or EXFAT so I can store files bigger than 4GB on this.
But... turns out the Xperia T won't read anything but FAT32. I can use the full capacity just fine and it works perfectly, but you're stuck if you want to load anything bigger than 4GB since FAT32 can't handle it.
Sort of sucks.
Click to expand...
Click to collapse
It should be able to read them.
Just borrow someones galaxy to format your sd card to ext 4 and try that. It should work.
I thought the Xperia T can support microsd up to 32gb
Sent from my LT30p using xda premium
cf.wu said:
I thought the Xperia T can support microsd up to 32gb
Sent from my LT30p using xda premium
Click to expand...
Click to collapse
No, it will support more.
Many people have reported this on these forums
gregbradley said:
It should be able to read them.
Just borrow someones galaxy to format your sd card to ext 4 and try that. It should work.
Click to expand...
Click to collapse
I used GParted in Linux to format the card from my PC, no dice. I tried EXT2, EXT3, EXT4, NTFS and exFAT. Nothing works. Tried hotplugging and rebooting with the card inserted.
I'm pretty sure the kernel only supports mounting FAT32 SD cards. With FAT32 everything is fine, you can use the full capacity and everything and the phone nicely formats it for you, but I can't live with the 4GB file size limit. Or well, not for the price I paid for the card.
I'm returning the card, doesn't really matter to me, but I absolutely don't get why Sony doesn't implement at least the EXT2/3/4 they use for the internal file system. It's baked into the kernel for sure but it just refuses to mount the SD card with it.
There are init.d scripts that will enable it, and I am sure there is a custom kernel that does enable it.
However, with 4.1 coming in q1 2013 you may want to hang onto that card....
gregbradley said:
There are init.d scripts that will enable it, and I am sure there is a custom kernel that does enable it.
However, with 4.1 coming in q1 2013 you may want to hang onto that card....
Click to expand...
Click to collapse
I really don't want to unlock my bootloader or root my phone...
I'm selling the card now, I got it online for way below what they go for in Belgium so I'm actually making a profit anyway. Not that I'm doing it for that, but when I want to I can just get another one around that time (but then I'll test with another card beforehand).
Why are you not for rooting your phone. I'm trying to way up if it's worth doing. And there's also the risk of my tech ability. I would say I'm a rank amateur in the tech department. Any opinions on where I can go to start learning. I have Xperia lt30p. Gratitude to anyone who points me in the right direction.
Sent from my LT30p using xda app-developers app
kympton said:
Why are you not for rooting your phone. I'm trying to way up if it's worth doing. And there's also the risk of my tech ability. I would say I'm a rank amateur in the tech department. Any opinions on where I can go to start learning. I have Xperia lt30p. Gratitude to anyone who points me in the right direction.
Sent from my LT30p using xda app-developers app
Click to expand...
Click to collapse
I've rooted tons of phones before, I'm a software development student and an extreme Android geek, but I like the safe, walled garden I'm in right now. I like what Sony has done with Android and want to keep as much of it intact to be honest.
I've rooted my own phones before too, but I felt I really spent too much time messing with it after doing those things, always tweaking things that really didn't do anything but offer placebo effects. I like not having to worry about that stuff.
And I don't want to risk any sort of warranty loss.
That's exactly what has been holding me back. If I was to root it I don't have any dev skills so would probably end up doing exactly what you explained. Just tweaking for tweaking's sake. But I do want to start understanding what's being said in forums. Some of it goes way over my head. I would like to test the limits of my Xperia t but am a little unsure where to start. How do you feel the Xperia t holds up in the top ranks of smartphones. This is my first Sony smart and I'm fairly happy so far.
Sent from my LT30p using xda app-developers app
Start by reading the all in one thread in the Q&A section.
You will not void any warranty by rooting as you can always revert back to factory settings by flashing a stock ftf and no one will know.
Furthermore you can do more than just placebo tweaks, like remove bloatware and change the look of your phone by adding new systemui.apk mods. Take a look in the theme and app section
Sent from my LT30p xda premium app.
How do I customise the signature on xda premium app?
Ambroos said:
So, I just got myself a 64GB MicroSDXC from SanDisk to use in my Xperia T as storage for some movies. I planned on formatting it in EXT2/EXT3/EXT4 or EXFAT so I can store files bigger than 4GB on this.
But... turns out the Xperia T won't read anything but FAT32. I can use the full capacity just fine and it works perfectly, but you're stuck if you want to load anything bigger than 4GB since FAT32 can't handle it.
Sort of sucks.
Click to expand...
Click to collapse
You had the same idea as me. I purchased a MicroSD card today, although it was only 8GB. I can confirm that anything other than Fat32 is not readable by the Xperia T running stock ICS.
I'm splitting the HD movies into two parts as a short-term workaround.
Further to the above, I can confirm that splitting the movie files using Split and Concat on a Mac (or Hjsplit on Windows), produces files which play fine in VLC player and MX player. The downside is that you have to navigate to the file using a file browser, for example, Astro and select play as video file and select your choice of player.
Not a very elegant solution, but allows Fat32 to be used and movie files larger than 4GB to be transferred and played.
Hope this helps!
davart said:
I can confirm that anything other than Fat32 is not readable by the Xperia T running stock ICS.
Click to expand...
Click to collapse
Wrong! I've got an EXT3/4 formatted 64gb card in my Xperia T and have about 45gb of data on it at the mo, and all of which is accessible. As Greg has already suggested, and I formatted mine using a Samsung Galaxy Note, but you could probably use any latest generation Galaxy!
There are at least 2 other threads discussing this (SD capacity and format). People really should use the search function - and they are probably in the Q & A thread.
Oh and I'm stock ROM, with nothing unlocked.
emuX said:
Wrong! I've got an EXT3/4 formatted 64gb card in my Xperia T and have about 45gb of data on it at the mo, and all of which is accessible. As Greg has already suggested, and I formatted mine using a Samsung Galaxy Note, but you could probably use any latest generation Galaxy!
There are at least 2 other threads discussing this (SD capacity and format). People really should use the search function - and they are probably in the Q & A thread.
Oh and I'm stock ROM, with nothing unlocked.
Click to expand...
Click to collapse
Are you sure it's ext3/ext4? Can you put files over 4GB on your SD? I formatted the card directly from GParted on my PC and tried about every file system there is and really only FAT32 was recognized.
Ambroos said:
Are you sure it's ext3/ext4? Can you put files over 4GB on your SD? I formatted the card directly from GParted on my PC and tried about every file system there is and really only FAT32 was recognized.
Click to expand...
Click to collapse
Not absolutely sure but I had to use an ext3/4 mounting tool to get readonly access when I inserted the card directly into my Windows PC. (not being able to get read/write access I tend to just connect the phone to the PC these days though.)
I've got a couple of > 4gb movies on the card and they seem to be playing fine.
Hi everyone! Has someone tried the xperia z with a 32 card with exFAT or ex# (no fat32 file system) and work with files bigger than 4 gb? It is most important for me to handle this file size. Thanks!
brau__lio said:
Hi everyone! Has someone tried the xperia z with a 32 card with exFAT or ex# (no fat32 file system) and work with files bigger than 4 gb? It is most important for me to handle this file size. Thanks!
Click to expand...
Click to collapse
This is the Xperia T/TL/TX/V-section. The Z is discussed here: http://forum.xda-developers.com/forumdisplay.php?f=2083
Mad Marty said:
This is the Xperia T/TL/TX/V-section. The Z is discussed here: http://forum.xda-developers.com/forumdisplay.php?f=2083
Click to expand...
Click to collapse
Sorry, I meant Xperia T. Thanks!
Hi,
Now that several custom Roms are out with init.d support does anyone know of a script that can be used with script manager to swap internal and external at boot?
I have a 512 GB SD card rigged inside of my 10000 MAH battery on my phone. Just need to swap the two so I can have unlimited space for games.
If you have a working script and share I will give you $50
Where did you get a 512 GB micro SD I thought they only went up to 128 gb
SD, not micro SD... Hadn't thought of trying something like that! Kudos.
jhax01 said:
SD, not micro SD... Hadn't thought of trying something like that! Kudos.
Click to expand...
Click to collapse
Yes I bought one from Sandisk full sized SD. Then you buy a SD to micro SD adapter off Ebay and you can use it.
https://www.google.com/search?q=SD+...%2Fsdmicro-to-sd-card-adapter%2F11922;800;600
That is the one I use
Combined with a flexible extended battery case it actually fits in nice and snug. Basically a god mode phone
512 GBs works like a charm.
Just need a good script to install all my apps there.
I have used folder mount in the past but even when using folder mount your internal memory slowly fills up...and eventually even with moving all files possible you run into an issue where you have 0 space on internal memory and tons on the SD.
I really wish they would not restrict Android this way
jhax01 said:
SD, not micro SD... Hadn't thought of trying something like that! Kudos.
Click to expand...
Click to collapse
I've seen a few how tos with the SD card and ribbon cable. Quite simple yet ingenious really!
Trev186 said:
Yes I bought one from Sandisk full sized SD. Then you buy a SD to micro SD adapter off Ebay and you can use it.
https://www.google.com/search?q=SD+...%2Fsdmicro-to-sd-card-adapter%2F11922;800;600
That is the one I use
Combined with a flexible extended battery case it actually fits in nice and snug. Basically a god mode phone
512 GBs works like a charm.
Just need a good script to install all my apps there.
I have used folder mount in the past but even when using folder mount your internal memory slowly fills up...and eventually even with moving all files possible you run into an issue where you have 0 space on internal memory and tons on the SD.
I really wish they would not restrict Android this way
Click to expand...
Click to collapse
Yeah I know how you feel... I use the Xposed module called XInternalSD on mine. I used to use a init.d script that did it on my Note 2 with 4.12 but got lazy and grabbed the Xposed module on this phone. But wow! A 512 GB SD card is crazy! I thought I had alot of crap and am planning on grabbing a 128. Your setup and the whole ribbon deal I had completely forgot about. Might end up reconsidering :good: I wonder if a Init.d script would still work since KitKat and changing the storage writing etc. I'll look further into this tonight. No need for money although that is very generous though. Not sure how I feel about developing and donations. I kinda feel like we do this stuff for fun and not profit but oh well. I'm not against it but personally don't think I could do that personally. Of course, I've never done anything to extravagant here anyways. Modded some roms, themes, hacks, etc. but nothing too fancy. I'll post back here if I find anything worth mentioning. XInternalSD works nicely though. The path is to internal card should be /storage/extSdCard on the settings part of the app. The init.d script should look something like this:
sleep 10
mount -o remount,rw /
mount -t vfat -o umask=0000 /dev/block/vold/179:49 /storage/sdcard0
sleep 30
mount -o bind /data/media /storage/extSdCard
chmod 777 /mnt/extSdCard
sleep 10
chown 1023:1023 /storage/extSdCard
chown 1000:1000 /storage/sdcard0
That's from my old one. Please don't use that lol! I just got to find the new value for the Note 4. It's either 179:64 or 179:65.... Hmmm... Not sure if anything else is needed since KitKat is different. [email protected] lol!
sino8r said:
I've seen a few how tos with the SD card and ribbon cable. Quite simple yet ingenious really!
Yeah I know how you feel... I use the Xposed module called XInternalSD on mine. I used to use a init.d script that did it but got lazy and grabbed the Xposed module on this phone. But wow! A 512 GB SD card is crazy! I thought I had alot of crap and am planning on grabbing a 128. Your setup and the whole ribbon deal I had completely forgot about. Might need up reconsidering :good:
Click to expand...
Click to collapse
how does xinternalSD work?
If I already have apps installed will it move everything to the SD that is already on the phone?
If I set it to do all apps will it run stay persistent through restarts so the phone always looks there or is a script needed?
I am not fond of foldermount it is clunky and as i said before it is possible to move all the apps off the SD card and still have the internal memory fill up. Plus there is the issue of internal memory filling up with non app stuff and then the phone refusing to let u install anything new from play store due to the apps not having enough space on the phone supposedly.
there must be a way to do a swap....
Trev186 said:
how does xinternalSD work?
If I already have apps installed will it move everything to the SD that is already on the phone?
If I set it to do all apps will it run stay persistent through restarts so the phone always looks there or is a script needed?
I am not fond of foldermount it is clunky and as i said before it is possible to move all the apps off the SD card and still have the internal memory fill up. Plus there is the issue of internal memory filling up with non app stuff and then the phone refusing to let u install anything new from play store due to the apps not having enough space on the phone supposedly.
there must be a way to do a swap....
Click to expand...
Click to collapse
I think it's just a fancy app to emulate that script storage swap. You should just try those two values I gave ya. I'm sure one of them will work. As far as some space on internal being eaten up... It seems unavoidable but it(the module or script) does help alot. I just got my device a couple of weeks ago and have been weeding through my old apps and what I want to keep etc. I'm an app hoarder apparently like yourself Anyways, so far the module seems to be keeping internal clean. It's worth a shot especially seeing all the work you put into making a giant storage space for yourself. I have to say I'm a bit jealous. Might have to get myself an early Christmas gift lol!
Oh I'm sorry. I forgot one part. Apparently if I remember correctly you don't want to have internal fill up too much or apps won't install like you said. Android internal requires 10% of available storage space to available or sh!t won't sync or install etc. So I totally understand. The problem is that now that storage is larger these days... 10% could be several GBs worth of space which is really stupid. If I were you... I'd try the Xposed module first and see if anything is moved. I kind of doubt it. You could move it manually with one of those apps you mentioned. There are quite a few up there if you don't like your current clunky one. I'll probably fiddle with those values on the init.d script soon if I get some more free time. I gotta do some more research and what exactly was changed with KitKat. I had been using 4.1.2 until very recently lol!
sino8r said:
I think it's just a fancy app to emulate that script storage swap. You should just try those two values I gave ya. I'm sure one of them will work. As far as some space on internal being eaten up... It seems unavoidable but it(the module or script) does help alot. I just got my device a couple of weeks ago and have been weeding through my old apps and what I want to keep etc. I'm an app hoarder apparently like yourself Anyways, so far the module seems to be keeping internal clean. It's worth a shot especially seeing all the work you put into making a giant storage space for yourself. I have to say I'm a bit jealous. Might have to get myself an early Christmas gift lol!
Click to expand...
Click to collapse
yeah once i am done with the 4 hour transfeer of the contents of my card to PC so I can safely screw around with it & not wipe it I will try a few things out with the scripts and modules.
I dont understand why Google makes it so hard to do this. They obviously took away the loop holes a lot of people used to do use to prevent it.
Hell I think they are insane for trying to kill off SD cards. The rate this industry has updated the internal storage vs the demands of game apps which come out is stupid...
The best phones are mainly for games, Highest downloaded apps games, apps people spend on most game...
games need memory. I could wipe out this 32 GB of storage with 10 games if I were selective. In this day and age that is just dumb.
Jack the price of the phone up...I paid $800 for my 512 GB SD card....obviously there is a demand for it. Hell a 128 Gb or 64 GB internal memory in the states would sell better then these 4 GB budget phones the industry spits out
majority of people i know who use smartphones use them for facebook, instgram, the camera and a few other social apps and maybe angry birds....
For these people to need these beefy processors and ram and it is overkill.
Trev186 said:
yeah once i am done with the 4 hour transfeer of the contents of my card to PC so I can safely screw around with it & not wipe it I will try a few things out with the scripts and modules.
I dont understand why Google makes it so hard to do this. They obviously took away the loop holes a lot of people used to do use to prevent it.
Hell I think they are insane for trying to kill off SD cards. The rate this industry has updated the internal storage vs the demands of game apps which come out is stupid...
The best phones are mainly for games, Highest downloaded apps games, apps people spend on most game...
games need memory. I could wipe out this 32 GB of storage with 10 games if I were selective. In this day and age that is just dumb.
Jack the price of the phone up...I paid $800 for my 512 GB SD card....obviously there is a demand for it. Hell a 128 Gb or 64 GB internal memory in the states would sell better then these 4 GB budget phones the industry spits out
majority of people i know who use smartphones use them for facebook, instgram, the camera and a few other social apps and maybe angry birds....
For these people to need these beefy processors and ram and it is overkill.
Click to expand...
Click to collapse
Exactly... I think since Google is pushing certain criteria on their own phones that they want to do so on the rest. In turn they have really stunted their own Nexus devices with lack of removable battery and storage. It's insane. And the beefier cpu/gpu/ram doesn't help if you don't have the Storage to run those games, apps, etc. Very happy Samsung hasn't done away with it yet... I think they realize they have the edge on all other phones because of this. The solutions are so simple it just blows my mind that few others get it. I think they are just trying to monetize on the whole situation by forcing us to buy the phones with larger storage. It's just wrong though. Screw over folks too much and you'll lose customers. Some don't get it until it's too late. Keep us filled in with how it goes. I'll check back here once I play with the script some.
sino8r said:
I've seen a few how tos with the SD card and ribbon cable. Quite simple yet ingenious really!
Yeah I know how you feel... I use the Xposed module called XInternalSD on mine. I used to use a init.d script that did it on my Note 2 with 4.12 but got lazy and grabbed the Xposed module on this phone. But wow! A 512 GB SD card is crazy! I thought I had alot of crap and am planning on grabbing a 128. Your setup and the whole ribbon deal I had completely forgot about. Might end up reconsidering :good: I wonder if a Init.d script would still work since KitKat and changing the storage writing etc. I'll look further into this tonight. No need for money although that is very generous though. Not sure how I feel about developing and donations. I kinda feel like we do this stuff for fun and not profit but oh well. I'm not against it but personally don't think I could do that personally. Of course, I've never done anything to extravagant here anyways. Modded some roms, themes, hacks, etc. but nothing too fancy. I'll post back here if I find anything worth mentioning. XInternalSD works nicely though. The path is to internal card should be /storage/extSdCard on the settings part of the app. The init.d script should look something like this:
sleep 10
mount -o remount,rw /
mount -t vfat -o umask=0000 /dev/block/vold/179:49 /storage/sdcard0
sleep 30
mount -o bind /data/media /storage/extSdCard
chmod 777 /mnt/extSdCard
sleep 10
chown 1023:1023 /storage/extSdCard
chown 1000:1000 /storage/sdcard0
That's from my old one. Please don't use that lol! I just got to find the new value for the Note 4. It's either 179:64 or 179:65.... Hmmm... Not sure if anything else is needed since KitKat is different. [email protected] lol!
Click to expand...
Click to collapse
If it helps I think the external SD is 179:65 since while messing around with another app it claimed that 179:65 appeared to be formatted as exfat which is the format of my SD card. I think the internal storage is formatted differently.
I know with the Note 2 there was a script you could run and set it for boot every-time that would swap the two.
http://galaxynote2root.com/galaxy-n...sd-card-with-rooted-galaxy-note-2-app2sd-mod/
If someone can go ahead and make it possible for the note 4 that'd be great.
XxLostSoulxX said:
I know with the Note 2 there was a script you could run and set it for boot every-time that would swap the two.
http://galaxynote2root.com/galaxy-n...sd-card-with-rooted-galaxy-note-2-app2sd-mod/
If someone can go ahead and make it possible for the note 4 that'd be great.
Click to expand...
Click to collapse
Yeah that's basically it what I posted. I've just got to place around with it first.
I've been playing around with values and haven't quite figured it out yet. The mounts are different, vold, and chown. I've changed a few different things here & there but no luck yet. I'll post it here or a redirect if I get it working.
sino8r said:
Yeah that's basically it what I posted. I've just got to place around with it first.
I've been playing around with values and haven't quite figured it out yet. The mounts are different, vold, and chown. I've changed a few different things here & there but no luck yet. I'll post it here or a redirect if I get it working.
Click to expand...
Click to collapse
Any luck? I have tried but no avail.
I did manage to get the ext storage to disappear a few times though lol.
Trev186 said:
Any luck? I have tried but no avail.
I did manage to get the ext storage to disappear a few times though lol.
Click to expand...
Click to collapse
Yeah I basically gave up. Keep getting FCing even with the correct settings. Did you try the Xposed module? It works nicely. Plus, I noticed they brought back move app to SD function which I might end up using on my larger apps. Not sure what else I can do. I may do some searching in the S5 threads. There's one particular mod I'd like to look at as well. It's a version of the download Booster that works with HSPA and lower MB threshold. That would be VERY HANDY to have working on our device!
sino8r said:
Yeah I basically gave up. Keep getting FCing even with the correct settings. Did you try the Xposed module? It works nicely. Plus, I noticed they brought back move app to SD function which I might end up using on my larger apps. Not sure what else I can do. I may do some searching in the S5 threads. There's one particular mod I'd like to look at as well. It's a version of the download Booster that works with HSPA and lower MB threshold. That would be VERY HANDY to have working on our device!
Click to expand...
Click to collapse
I read that one way to do it in kitkat is to get into your actual kernel image and edit it in there.
A little out of my exp but I may give it a try.
sino8r said:
Yeah I basically gave up. Keep getting FCing even with the correct settings. Did you try the Xposed module? It works nicely. Plus, I noticed they brought back move app to SD function which I might end up using on my larger apps. Not sure what else I can do. I may do some searching in the S5 threads. There's one particular mod I'd like to look at as well. It's a version of the download Booster that works with HSPA and lower MB threshold. That would be VERY HANDY to have working on our device!
Click to expand...
Click to collapse
This guy here can get it to work on Kit Kat. He says he is also planning to get a Note 4 this year:
http://forum.xda-developers.com/showthread.php?t=2468596&page=43
Hopefully he does soon and he creates the mod for Note 4
Trev186 said:
This guy here can get it to work on Kit Kat. He says he is also planning to get a Note 4 this year:
http://forum.xda-developers.com/showthread.php?t=2468596&page=43
Hopefully he does soon and he creates the mod for Note 4
Click to expand...
Click to collapse
Mattiadj is a beast at this true, but you guys are also awesome for even attempting this mod for our note 4's. I've been rocking his mods since the note 2 and can't live without them now, one of the reasons I can't give up my note 3 because of his very useful mod lol