:good:
After flashing the custom ROM Trickdroid from 5.2.1 to 5.3.0 my WiFi was flaping dropping and couldn't hold the WiFi signal any more.
I found the following thread : http://forum.xda-developers.com/showthread.php?p=40571006#post40571006
After installing the new radio baseband, everything was back to normal.
Hope this helps some other frustrated updater
Perhaps this trick can be useful in trickdroid thread
same here dude, I can't even use my wifi even the wifi has been connected....
Related
Ok.. so i thought this was weird.
i was having wifi problem. not being able to get connected or even see the networks on my phone.
CM6.1 and superhybrid 2.11 does not have problem its just when you flash a theme or kernel it start causing problem (FOR ME IN MY CASE, i dont know about you), and wifi eventually stops working.
currently i am running lastest radio korean version.
Whenever i flash a wild monk or other kernels on CM6.1 wifi stops working
When i flashed the stock theme that was provided on the op from superhybrid 2.1.1 the wifi stopped working.
i just thought it was weird and wanted to know if any of you guys are experiencing same problem as me.
Let me know Thanks!
I've tried a few WildMonks on CM 6.1 nightlies, and don't have any wifi problems...
Sent from my Nexus One using XDA App
which version are u using.
CM 250 nightly, and I think the WildMonks is:
2.6.35.8_AVS-925mV-CM_CFS_20101116_2329.zip
Its listed as #154 in the About Phone info (don't know why they never make the file name the same as the version info)
Sent from my Nexus One using XDA App
I always flashed wildmonk's kernel right after i flashed CM6.1 nightlies, and my wifi is always wonky (i get a lot of errors enabling wifi and wifi tethering).
Next time I do a full wipe, i wont apply the kernel and see if that happens
Hi , my router is working very well , but since i have updated to a custom firmware , using wifi analyzer on my phone i can clearly see the signal is around one third lower than before my custom firmware (juwes 5.2 XXJVQ from a fresh install , semaphore kernal 1.3.2).
what can i try to do to improve my phones reception ability for wifi ? reflash certain parts , edit files , tweaks etc.
like i say router has not changed , my other phones all register with there original strong signal using wifi analyzer from the market place.
i'm new to odin , so if files need to be flashed , please let me know which file and which section it goes in please , i'm happy to experiment , but not sure what i should be experimenting with
T.Y
Try experimenting with different kernels as they contain the wifi bits and pieces
Sent from my GT-I9000 using XDA Premium App
It also happens to me (darky rom 10.1) w/ 2.3.3
thank you for your reply , but could you give me a bit of a clue as to what to do and how to experiment ? so i be downloading different stock roms and flashing the modem only onto my custom rom ?
Get Wi-fi Analyzer and have a look at the signal strength as you flash different modems.
Perka's stash is a good place to find CWM packages of modems only.
Just stumbled an this by mistake and I think is a nice tool to have. Just give it go.
https://play.google.com/store/apps/details?id=com.sibbor.getril
Sent from my Desire HD
So? Want are your thoughts on it?
Sent from my Desire HD
I will download and test this=) Will be posting thought asap ^^,
-------------------------------------------------------------------------------
Well, this app shows me that "RIL/Baseband doesn't match".
I try clicking "Download & Install RIL", the app starts "downloading" the "correct" RIL, it says it installed it successfully.
But, yes there's a but, after that it goes back to saying that my ril/baseband doesn't match.
Then I did a reboot. Starting GetRIL: Now my baseband says "unknown". So now I'm working on getting the correct radio for this RIL (2.2.0201HM)
I Will edit this post again after flashing the latest radio and tell you guys how it goes.
-----------------------------------------------------------------------------
Ok so i Clearly got no idea about what I'm doing here, after flashing the latest Radio (to go with the latest RIL) i got no signal on mobile/data networks. It was just after installing the latest RIL i saw in this thread that RILs should not be installed on AOSP Roms. Im on LC's IceColdSandwich which is AOKP based, that after my understanding is based on AOSP. I have now reflashed my ROM to see if this solves my data problems.
-----------------------------------------------------------------------------
After reflashing my ROM I got my singnal back! :laugh:
I then started GetRIL again and got the "RIL/Baseband doesn't match". Then went back to the Radio/RIL thread to check which RIL I should use on the radio im on, found it and downloaded and installed that. GetRIL now says "RIL/baseband is matching". I rebooted the phone and tada! lost my signal.
Back to the Radio/RIL thread: It says to dont install RILs on AOSP ROMs.
My conclution: the GetRIL app work if you check which RIL you should install to go with your Radio, But DON'T use it on AOSP/AOKP Roms!
Even I tried on aokp.. You won't get after reboot. If you are using custom rom it comes with the latest RIL. RIL is always included in the rom.. So no need to use this.. For me it was showing mismatch of RIL with baseband.. After flashing my phone has become dumb and deaf till the next flash..
Sent from my Desire HD using xda premium
Can someone explain me why do I need to have a matching RIL and baseband?
Is there any better RIL for each Carrier?
Does the RIL updates with the ROM?
Does anyone knows any tutorial about the RIL?
Thanks!
I used this with ics Rom and after phone will not recognize the sim card. Had to revert back. Do not switch RIL if on a ics Rom. (sense or base)
Sent from my HTC Desire HD Telus using xda premium
I have just loaded rev 3.5 desensed rom (tried the same with Rev sense rom 3.3 too) and everything worked fine. Apps run well and fast, wifi is working well at all 722, 767 and 806 mhz kernels included.
Problem i have is that regardless of kernels (including original stock kernel @ 600mhz), the phone reboots when i turned on mobile data. It will reboot back into the android launcher and load up to the point when it connects to 3G mobile data... it would reboot.
I do not use an EXT3 partition and hv not selected to use it for swapspace when installed the rom.
Anyone faced the same challenge before? and any resolution? Seems like the phone i have is happy running @ 806mhz for whatever apps i throw at it. Problem just lies with the mobile data. I can use it now as per normal without mobile data.
Help please. Thank you
Resolved not fixed
Further testing with the apn fixed version 3.5 desensed revolution rom yields success but only when mobile network is set to GSM only, which reduces speed to only 2G for mobile data. Revolution roms does not seem to support wcdma well, despite the really good work done and excellent performance. A pity. Hope this is fixed in future.
Went with nameless rom 7.4.3 with latest 800mhz Prometheus kernel to stabilise the wifi, and things are working flawless now. Thought i might pop this for others facing similar challenges. You will have to source nameless roms from other sites. Cheers.
No WCDMA
Thanks for this.
I have exactly the same problem and thought it was a problem with my settings. Obviously a Revolution Rom problem.
i found that too
Premise : as I said in the title,I'm not asking 'what is the best rom ?'.
Now,here's my problem and my question :
Since a month I have 2g connecyion problems (YES,I use 2g connection and I switch to 3g only when I need a data connection;I save more battery and my phone can last 30-40 hours from 100 to 15%),very often my phone loose the signal and it won't turn back until I reboot.
I read in the forum that is a cm bug and in some vanir rom the problem is fixed.
Here's what i did trying to fix the problem :
-restore stock firmware through kdz file (v20a)
-root/recovery and unsecure boot flash.
-flash cm 10.1.3 and iodak kernel (clean instal) -> still 2g problem.
-flash vanir stable 4.3.1 with stock or werewolf kernel (clean install) -> 2g problem and sometimes when I lost the signal the phone gets hot and my battery drains really fast. I have also another problem : my phone was at 90%,i turned it off and in the morning the battery was at 0%.
-flash zaiben rom with iodak kernel(really old version that worked correctly in the past)-> wifi problems after some reboots.
-flashed miui 3.12.6 from miuiandroid with optimus prime kernel -> 2g problems.
I don't know what to do,can someone suggest me a stable rom without network problems (wifi/2g,3g/gps/nfc) and maybe with good performance and battery life ?
Yesterday I flashed 4 different rom (always with a clean install) and I'm tired to try different rom so please,don't answer me 'make backup and try this or that rom' and share your experience instead.
Thanks in advice.
stock rom, or any custom 4.2.2+ rom with EPRJ RIL implemented, which you can do yourself. look for my tutorial in general subforum, replacing CM RIL with EPRJ RIL gives rock-stable connection
I already looked your tutorial and the official thread of the tool but afterinstalling java,net framework etc,the tool doesn't work.
It says 'java not recognised' or something similar.
And what about kernels ? Does they (or some of them) create some kind of problems ?
So,if I'll make the tool works and I'll replace the ril,can I use cm 10.1.3 with iodak 8.0 kernel without problems ?
The strange thing is that network worked correctly with cm 10.1.3 for months,but now it doesn't.
BTW,wich rom are you using ? Can it fit for my phone use ?
MEDIACOM SmartPad 810c
ROM : First 4.3 (4.0.3)
moss20 said:
I already looked your tutorial and the official thread of the tool but afterinstalling java,net framework etc,the tool doesn't work.
It says 'java not recognised' or something similar.
And what about kernels ? Does they (or some of them) create some kind of problems ?
So,if I'll make the tool works and I'll replace the ril,can I use cm 10.1.3 with iodak 8.0 kernel without problems ?
The strange thing is that network worked correctly with cm 10.1.3 for months,but now it doesn't.
BTW,wich rom are you using ? Can it fit for my phone use ?
MEDIACOM SmartPad 810c
ROM : First 4.3 (4.0.3)
Click to expand...
Click to collapse
you gotta edit some settings on your computer, if you have issues with java. check out the link in the tutorial to the program i used to extract .jar file, it has the proper troubleshooting ^^
kernels shouldn't have issue with 2g/3g, but i do know some custom kernels have issues with wifi on stock and stock-based rom that appear randomly, and just as randomly go away (wifi stuck on turning on)
and yeah, you should be able to use iodak+cm combination without the issue. and it is strange that the problem just now started appearing, but hey, if this works, you got yourself set for future
atm i'm back on modified stock with iodakv7, i needed proper mhl support. i've however used i think all the roms for our device atleast for a week or so. carbon, slim, omni, vanir, cm, aokp, pac, mokee...
Ok,I'll try to fix java problems and I'll se what happens and I'll report here
MEDIACOM SmartPad 810c
ROM : First 4.3 (4.0.3)
moss20 said:
Premise : as I said in the title,I'm not asking 'what is the best rom ?'.
Now,here's my problem and my question :
Since a month I have 2g connecyion problems (YES,I use 2g connection and I switch to 3g only when I need a data connection;I save more battery and my phone can last 30-40 hours from 100 to 15%),very often my phone loose the signal and it won't turn back until I reboot.
I read in the forum that is a cm bug and in some vanir rom the problem is fixed.
Here's what i did trying to fix the problem :
-restore stock firmware through kdz file (v20a)
-root/recovery and unsecure boot flash.
-flash cm 10.1.3 and iodak kernel (clean instal) -> still 2g problem.
-flash vanir stable 4.3.1 with stock or werewolf kernel (clean install) -> 2g problem and sometimes when I lost the signal the phone gets hot and my battery drains really fast. I have also another problem : my phone was at 90%,i turned it off and in the morning the battery was at 0%.
-flash zaiben rom with iodak kernel(really old version that worked correctly in the past)-> wifi problems after some reboots.
-flashed miui 3.12.6 from miuiandroid with optimus prime kernel -> 2g problems.
I don't know what to do,can someone suggest me a stable rom without network problems (wifi/2g,3g/gps/nfc) and maybe with good performance and battery life ?
Yesterday I flashed 4 different rom (always with a clean install) and I'm tired to try different rom so please,don't answer me 'make backup and try this or that rom' and share your experience instead.
Thanks in advice.
Click to expand...
Click to collapse
Don't use unsecure boot flash' it is.unnecessary
Try optimus play kernel, it is excellent for me (wifi, 3g always on, whole day of battery and more)
Sent from my LG-P880 using Tapatalk
now I'm on miui 3.12.6 with optimus prime kernel and I edited the RIL using flyingbear's tutorial but it's too early to say if it works but first impression seems good.
I'm too busy to check another rom (i'd like to use vanir 4.3.1 or cm 10.1.3) and other kernel but when I'll try it,I'll write my impression
I have similar problem with network on latest miui.When i restart device or just turn it on/off i can find network untill i go to airplane network and switch it off again then everything is fine.Also it happened just 1 time that i lost my network while my phonewas on.I did discovered that this is MiUi problem since i never got this kind of behavior on any previous rom.Last couple of days even fter restart my network is ok no need to use airplane trick anymore.So again i will say this is miui bugg for somereason.
Sent from my LG 4X HD refrigerator.
Trust me,it's a month that I "fight" with mobile network,it's a common problem for all non-stock based roms,sometimes happens and sometimes not.
However you can fix it with flyingbear's tutorial.
MEDIACOM SmartPad 810c
ROM : First 4.3 (4.0.3)