Database Develop

Death after flashing ROM

Please help me. I am desperate.
I have flashed my Telus HTC Touch Diamond with the "Telus_shipped french" ROM, following steps by steps the guide "Flashing a Rom or Radio from the 4 gig internal storage ".
My phone is stucked at the rainbow screen showing the following error message: "upgrade ROM code error. Please try again". No hard reset, no nothing will fix it.
Thx

connect it to ur pc when its in bootloder (the rainbow screen) where it says serial at the bottom it should now say usb, now just use a ruu to flash a new rom

Thank you so MUCH mancsoulja. I did not try it because after the flash my PC was not able to see my Diamond through the USB connection, so I thought that...
Just a question. How do I know if I should use the ROM for CDMA phone or the one for GSM?

SOLVED! Bootloaders as far as it goes...Will not load any flash with SSPL or HSPL.

About a year-ish ago windows stopped working on my spv3600 m700 Trinity. I looked into reflashing the phone & put a copy of schaps 4.30 striaght onto the fone no problems.
I now want to upgrade the rom again & can get it into the bootloader screen ok. My problem is that this is as far as I can get. I've even tried the minisd trick but I see loading box very briefly flash up on the screen & thats it...still in bootloader mode with serial but nothing else happens.
The fone is not bricked & if I reset it will load windows. I've tried the original flash & bootloader. Soft (SSPL) & hard Bootloader technique but to no avail.
Has anyone got any other solutions? Many thanks in advance, its sending me crazy!!

Ok I sorted the first problem of using SDcard to flash .MBH files. It was down to the miniSD card format not being FAT32. I reformat the card as FAT32 & then bootloader progressed to installation stage.
...now I have a new problem... i'm stuck in bootloader mode SPL 1.07.0000 IPL 0.50 after I used SSPL from my mobile in windows mode to get the 1.07ds override bootloader. This allowed me to flash the Radio to the latest chinese version. I then used this program again to Flash to windows 6.5 & then half way through it rebooted to the bootloader tricolour screen.
The problem is that now that windows is gone I can only run the standard bootloader SPL 1.07.0000 with the phone. If I try & upgrade a cooked ROM it comes up with an error code on the mobile. If I try an official version it checks the ROM & then says "not allowed".
Is there a way I can change the bootloader through the card SD? I can't either get the bootloader to change from serial msg to usb...doesnt matter how many times I plug in the USB & i'm using XP. Is there a way to force it into USB?
I've tried putting "Des crash proof SPL" ,"Hard SPL", "Hard SPL 1.20" onto SDmini card as TRINIMG.NBH bootloader loads then comes up with 00068002 error i presume on screen
I've tried putting official upgrades "RUU Trinity DOPODA SIA WWE...Ship.EXE rom" & "RUU Trinity HTC WWE .........GPS.exe rom" onto SDmini card as TRINIMG.NBH, bootloader loads, . . .checking, then displays "not allow" & "00028002" on screen! Now i'm really stuck!
Any help would be greatly appreciated!

looks pretty much the same like my trinity right now...
help would be very appreciated

Solved.
Finally worked out why my phone would not change from serial to usb on the bootloader screen. Its all down to the power from usb lead...luckily I have a double usb lead which I use for an external hard drive. Two usbs plugged into my laptop provides twice the current...as soon as I used this lead tadaaa, the phone comes on & is recognised by windows xp even when its in bootloader mode. If you don't have a lead try using a different computer...just incase the usb output is crap!
From here I then ran the unbrick / exploit program which you have to run two/three times but then this will put the phone into a bootloader which allows you to flash the phone with any ROM.
Hope this info is of any help.

steve54321 said:
Finally worked out why my phone would not change from serial to usb on the bootloader screen. Its all down to the power from usb lead...luckily I have a double usb lead which I use for an external hard drive. Two usbs plugged into my laptop provides twice the current...as soon as I used this lead tadaaa, the phone comes on & is recognised by windows xp even when its in bootloader mode. If you don't have a lead try using a different computer...just incase the usb output is crap!
From here I then ran the unbrick / exploit program which you have to run two/three times but then this will put the phone into a bootloader which allows you to flash the phone with any ROM.
Hope this info is of any help.
Click to expand...
Click to collapse
Still on bootloader with error 0068002
can't ran anything.
Please help......
SOLVED:::::::: sorry

Trinity bricked , pls help ...
steve54321 said:
Finally worked out why my phone would not change from serial to usb on the bootloader screen. Its all down to the power from usb lead...luckily I have a double usb lead which I use for an external hard drive. Two usbs plugged into my laptop provides twice the current...as soon as I used this lead tadaaa, the phone comes on & is recognised by windows xp even when its in bootloader mode. If you don't have a lead try using a different computer...just incase the usb output is crap!
From here I then ran the unbrick / exploit program which you have to run two/three times but then this will put the phone into a bootloader which allows you to flash the phone with any ROM.
Hope this info is of any help.
Click to expand...
Click to collapse
Hi , there ,
I am finding myself into the same situation but I do not realy get you : how You managed to get out of the bootloader mode where it says :
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
Can you , pls, be more specific , cause I am a newbe who bricked his Trinity a week ago :::

Blocked with error 0068002
Hello, after I install nAr.23016.FRA.IE8-CHOME on my sfr s300+, I'm blocked on the first page HTC, etc...When I put the S300+ under bootloader (photo and power button action), I plug the USB and I itry to flash;result is a reboot. I try with TRINIMG.NBH and result is error 0068002.
I need help to resolve this problem.Can u help me? Regards.
dan (excuse my bad english)

[Q] Possibly bricked Trinity, help please!!!

Hello!
I have this problem:
I've installed WM6.5 on my Trinity, and it worked well, but today I wanted to try WM6.1 (0.4.9.0 digital) also. The following happened:
Everything worked fine, but at 54% flashing my brother lifted the phone, possibly it lost the USB-contact, because the flasing stopped with an error message (unfortunately can't remember the error number). Since then if I try to flash it with WM6.1 or WM6.5, after 1% the phone resets itself, and the RUU gives a 270 error.
I have the original WM5 ROM also, but if I try installing it, after "Verifying information on your PDA Phone" screen I get a connection error 260.
What can I do???

After the phone resets itself, I can see the HTC logo, and the red letters and numbers, but that's all.

If I try HardSPL, I also get a 260 error.

Can you enter bootloader manualy?
If you can than see SERIAL change to USB when connected to PC it should be OK.

if you have a SD card, you can also try to flash "manualy".
- put your RUU... NBH at the root of the card,
- rename it trinimg.nbh,
- reinsert the card in the phone,
- enter in bootloader (power+cam+reset)
you will have a grey screen asking to push "power", do it and that's it.
if USB is well working, maybe you just need to reflash the hardspooler.

Thank you for your replies.
Fortunately I solved the problem.
I did the following:
1. To be sure, do all the stuff on a Windows XP machine
2. DISABLE "Allow USB Connection" in Active Sync so you see a small red X symbol next to the Active Sync symbol
3. Start the device into Bootloader mode (Cam+Power+Reset) and connect the device to your PC and make sure USB is written on the bottom of your screen (NOT Serial!)
4. Download splxploit (http://forum.xda-developers.com/atta...0&d=1180043588) and execute unlock on your PC
5. Follow the instructions
6. Download HardSPL (http://forum.xda-developers.com/atta...8&d=1185364317) and follow the instructions
7. Finally (to be sure) restart into Bootloader mode and check if SPL is showing "SPL-1.30.Olipro) - if this is the case you've done it !
8. Flash your preferred ROM via miniSD or USB connection

I m glad you solved this. Every day another new way of solving the flash problems.

Hi to All guys
i've got a trinity from my work and it has a custom rom.
I wanted to changed the rom so i download a wm 6.5 and erase the trinity with mtty. After that i try to install the rom with he RUUUupdate, but it get error 270.
Only in that moment i read on the bootloader and see that it haven't olipro or another HARDSPL installed.
So i looked for a solution and i try the unbrick with the splxploit. I did it and i get olipro on the bootloader, but i don't know how go on with install, if i use the exe i get 260 connection error.
Can you help me?

[PROBLEM] Bricked my Blackstone

Hi All.
I've had my flashed severtal times with the new ROM and never had any problems with it (apart from ROM itself not being perfect).
Yesterday I've cooked myself a plain ROM and flashed phone with it. Flash took less than a minute and my phone isn't starting any more. I've checked NBH file and it's only 6 MB!
At the moment all I can do it to is to try to turn it on, it stops on the 'Smart Mobility' screen with red info on the bottom. Info reads:
R 1.14.25.24
G 52.64.25.34U
D 1.59.48753
When I start my phone with Vol Down button pressed it goes to tricolor and when I continue to hold Vol Down I get white screen with message: Loading: No Image File! showing on the screen briefly and back to tricolor.
No problem you say - flash another ROM. But at the moment my phone doesn't connect to my PC. Cable tested with another HTC - works. When I connect it I get USB on the screen but Flashing utility doesn't detect the phone.
When I try to Hard Reset the phone it just starts normally. So Vol Up + Vol Down + Power doesn't work at all. All I have is smart mobility and tricolor.
Info from Tricolor:
BLAC100 32M
SPL-1.56.OliNex
MicroP-Blackstone (LED) v6
and on the bottom either Serial or USB.
Question is:
is there anything I can do to revive my phone? Is there any way to flash it without USB connection? If yes, how do I do it?
Thanks in advance,

There is a way of flashing from SD card if you have HSPL (you do... OliNex).
Please do some search...

if it displays usb in tricolor you can flash a rom with CustomRUU from there. its not bricked

Put BLACIMG.nbh on the root of your SD card and enter bootloader mode, it'll detect it and ask if you want to flash it - press power button to confirm.

Dont connect your phone to your computer.
Hold down the Volume down button and hit the power button.
Your entering the tricolor boot screen and at the bottom the word "Serial".
Now connect you phone to your computer with te USB cable the word serial disappear and now it says USB.
Now you can normally flash/update your phone.

Thank for all your answers.
Problem still lasts, tried everything I could, including trying another computer. I've tried SD card flashing but couldn't get past tricolor. Everytime I tried all I got was No image file! and nothing.
In desperate act of dying I've went to my neighbour and borrowed his old Win XP laptop and it worked... Currently flashing new ROM to it.
What I cannot understand is why my computer (iMac running Windows on parralels), my laptop (Win 7) and my second laptop (Win Vista) couldn't detect the phone. I've succesfully flashed it before using all three machines, including virtualized Win 7 on my mac :/
Any ideas why it stopped working? I'll try to connect it again when ROM will be fully flashed and let you know.
Thanks for your help anyway.
Cheers,

Why don't you try shipped ROM, it may do the trick.
Get the original shipped ROM from HTC site or from XDA site.
Extract the content in some directory
Rename ruu_signed.nbh to BLACIMG.nbh and copy it on root folder of your SD card.
Now start your phone holding Vol down button.
Fingers crossed to to start flashing

Hi again.
I can confirm that due to flashing my phone with that odd 6MB ROM I could not connect it to any computer running Windows Vista or Windows 7. Strangely enough - it worked with Windows XP Professional. I have managed to flash my phone again on it using custom ROM from this forum.
Cheers,

yeramihi said:
Hi again.
I can confirm that due to flashing my phone with that odd 6MB ROM I could not connect it to any computer running Windows Vista or Windows 7. Strangely enough - it worked with Windows XP Professional. I have managed to flash my phone again on it using custom ROM from this forum.
Cheers,
Click to expand...
Click to collapse
Glad you got this sorted. As your issue is now rectified I'm closing this thread

[Q] HELP: Stuck in bootloader or no USB

Hi All,
from one moment to another my X1 decided to boot into bootloader mode.
The strange thing is however, that when I connect it to the USB of my PC and reset the X1, it boots normally. Well, almost normal as the USB doesn't seem to be working.
I flashed the rom to APP-SW_X1_GENERIC_UK_1213-6450_R3AA010__KOVS using the SDCard and that worked without a problem. But still the X1 boots into bootloader mode (except when connected to the PC).
I tried a hardreset, pressed the volume down button several times (to make sure it isn't stuck), tried to use MTTY (but that doesn't show a prompt), but nothing seems to help.
Is there anyone who can help me with this, because I'm out of ideas....
Update:
I managed to boot the OS (USB connected) and install HSPL using Xperia-SSPL-Manual. This succeeded and I now have SPL-0.78.OliNext. I flashed the phone to a new ROM (826x_KOVSKY_29017_2021), and that succeeded as well. It didn't solve my problem however. I still get the bootloader screen when I start the phone and can only start the OS by starting with USB connected...
Update2:
Yesterday evening I took the whole phone apart to make sure no buttons are/were stuck. Didn't find anything, put it back together and it still boots into bootloader.
I also managed to get a connection to the phone using NueTTY. I executed command Set 14 0, restarted the phone...and still it boots into bootloader.
If there is any one who knows of something that I haven't tried yet, PLEASE let me know....

same problem,,if there's a way to flash recovery from sd card in fastboot mode,,that'd be great

kldahmd said:
same problem,,if there's a way to flash recovery from sd card in fastboot mode,,that'd be great
Click to expand...
Click to collapse
Flashing the ROM is no problem, I can put every ROM on it that I like. But even after flashing the ROM the phone still starts in bootloader....

You can try to go into the bootloader on ur pc and use recovery.bat with fastboot.

xvink said:
Flashing the ROM is no problem, I can put every ROM on it that I like. But even after flashing the ROM the phone still starts in bootloader....
Click to expand...
Click to collapse
hi, I'm kind of having the same issue as you do..can you please be of help and tell me how did you manage to HSPL it to 0.78.OliNex?
Correct me If I am wrong, but you must copy Xpera_SSPL_Manual. exe on X1, run it from file explorer and then run X1_HardSPL.exe on your PC, whlie X1 is connected via usb (although mine also doesn't recognize the X1) ?
i would really apreciate it... thnx

i have the same problem guys, did anyone of you found any solution for this?

same problem
Have you tried to do a task29 with KovskyAdvancedRUU?