Related
Hi
how can i flash the original stock firmware from LG that came with the phone when i bought it ??
I want a hard-reset because i have changed some stock data without doing a backup and now i would get back to all the original stock files. Like the data on the phone when i bought it.
How can i get back to the original stock firmware so that every file is from the lg stock firmware 10F ??
samir23 said:
Hi
how can i flash the original stock firmware from LG that came with the phone when i bought it ??
I want a hard-reset because i have changed some stock data without doing a backup and now i would get back to all the original stock files. Like the data on the phone when i bought it.
How can i get back to the original stock firmware so that every file is from the lg stock firmware 10F ??
Click to expand...
Click to collapse
The only thing that change with the V10f is the performance, battery life and heat. A few more things maybe...
All the apps are the same, no more, no less.
By the way, whats your original firmware?
---------- Post added at 01:44 AM ---------- Previous post was at 01:41 AM ----------
RuedasLocas said:
The only thing that change with the V10f is the performance, battery life and heat. A few more things maybe...
All the apps are the same, no more, no less.
By the way, whats your original firmware?
Click to expand...
Click to collapse
Another thing, its enough when you do a reset to "factory settings"
my current firmware is the v10f .. but i have rooted my phony and changed or modifid some files. So now i wanna go back the original firmware (files) like the firmware when i bought this phone. I didn't make an Backup . My question is now: how can i flash a stock firmware from Lg ?
try this method:
http://forum.xda-developers.com/showthread.php?t=1861854
samir23 said:
my current firmware is the v10f .. but i have rooted my phony and changed or modifid some files. So now i wanna go back the original firmware (files) like the firmware when i bought this phone. I didn't make an Backup . My question is now: how can i flash a stock firmware from Lg ?
Click to expand...
Click to collapse
All versions published are stock, once bootloader is locked.
To flash you need to use the method that everybody use, there are differences between the "developer" phones and the retail ones only.
Just go to "how to flash" and its everything there. One more thing, don't take out the battery to enter in S/W mode.
I have tried this method but during the flash, my display shows only yellow pixel and nothing more... the flash wasnt successfull ??
ahhh cool ... now it works ... i don't have to put the battery out for the flash-process !!! THANKS
samir23 said:
I have tried this method but during the flash, my display shows only yellow pixel and nothing more... the flash wasnt successfull ??
Click to expand...
Click to collapse
Try this:
-Turn off your phone.
-Turnit on while you keep pressed "VOL-", you'll be in "Android system recovery".
-Select with the "Vol-" key, the option "wipe data/factory reset" than press the "On/Off" key to execute.
After finish that, just hit the "On/Off" button to "reboot system now".
Now, if your phone is not like from the factory, if you think that is missing something or something when wrong, try to flash it.
Don't forget that after you execute the "WindowsEnabler" you need to go to the task bar (down on the right of the screen) and click on the icon until you see "ON".
To connect the phone to flash, turn it off , with the phone off press the "VOL-" key and connect the cable ( must be connected on the pc first!)
Pay attention to the tutorial and don't take out the battery in any moment.
RuedasLocas said:
Try this:
-Turn off your phone.
-Turnit on while you keep pressed "VOL-", you'll be in "Android system recovery".
-Select with the "Vol-" key, the option "wipe data/factory reset" than press the "On/Off" key to execute.
After finish that, just hit the "On/Off" button to "reboot system now".
Now, if your phone is not like from the factory, if you think that is missing something or something when wrong, try to flash it.
Don't forget that after you execute the "WindowsEnabler" you need to go to the task bar (down on the right of the screen) and click on the icon until you see "ON".
To connect the phone to flash, turn it off , with the phone off press the "VOL-" key and connect the cable ( must be connected on the pc first!)
Pay attention to the tutorial and don't take out the battery in any moment.
Click to expand...
Click to collapse
YEAH right it works but i must do a full wipe before starting to flash
Maybe you can try "emergency firmware recovery" through LG PC Suite...
I think its the simplest way to refresh original firmware.
Hello everyone! The wifi of my G.Note turns off at any time. Even while I am using the phone!
This problem first occurred on an ICS rom but it wasn't on a daily basis. Each time I had to modify the "wpa_supplicant.conf" file by deleting a few lines (some networks) using the text editor and then right afterwards I could turn it on.
A few days ago the problem occurred a few times a day and it didn't turn on right after editing the aforementioned file.
Then I flashed a JB rom and it seemed OK the first day but then again the same problem appeared.
Is there anything anyone can think of?
Maybe wifi is dead for ever?
so whats the issue now? no wifi or disconnecting?
nokiamodeln91 said:
so whats the issue now? no wifi or disconnecting?
Click to expand...
Click to collapse
This morning I flashed a JB rom and it worked every now and then. But I had some other issues and I just flashed ICS rom.
Now I cant't turn it on at all.
did you restore your back ICS. or flashed a new one. flash a new rom..
nokiamodeln91 said:
did you restore your back ICS. or flashed a new one. flash a new rom..
Click to expand...
Click to collapse
Flashed a new one.
tried doing a reset on safe kernel?
nokiamodeln91 said:
tried doing a reset on safe kernel?
Click to expand...
Click to collapse
If you mean wipe data/factory reset /cache partition /dalvik, I have done all that.
Ok.. what kernel are you on now? Install Philz kernel and go to Philz settings and choose "clean before new rom install". once done.. choose advanced and reboot download. flash the rom again. let it boot and check.
nokiamodeln91 said:
Ok.. what kernel are you on now? Install Philz kernel and go to Philz settings and choose "clean before new rom install". once done.. choose advanced and reboot download. flash the rom again. let it boot and check.
Click to expand...
Click to collapse
OK! Thank you, I will try that and I will post later...
nokiamodeln91 said:
Ok.. what kernel are you on now? Install Philz kernel and go to Philz settings and choose "clean before new rom install". once done.. choose advanced and reboot download. flash the rom again. let it boot and check.
Click to expand...
Click to collapse
I tried all that but still have the same problem...
ok. does the wifi switch itself off or disconnects.. ?
Sorry but recently I got the same problem with wifi switching off automatically after switching on for a while.
I am on official cm10 rom with CM kernal
Sent from my GT-N7000 using xda app-developers app
nokiamodeln91 said:
ok. does the wifi switch itself off or disconnects.. ?
Click to expand...
Click to collapse
It does switch off itself.
I think wifi is dead...
Yesterday I flashed a stock GB rom and wifi was working fine. I have flashed many roms but it was the first time to flash one with pc odin.
Before flashing I wiped data/factory reset, cache partition, dalvik cache, format system / data / preload.
After that I downloaded a new stock JB rom and flashed it with pc odin again. All the afternoon everything was working nicely and smoothly.
This morning again wifi started disconnecting...
What I have to point out is that the problem occured when I connected to a few different wifi networks.
The phone after all these wipes and formats it keeps the wifi data. I connected to wifi networks without asking for a password.
I think I need to erase everything but I don't know how to do that. I want to make the phone exactly as it was when I bought it. I am not saying this will fix the problem but I don't know what else to do.
So you mean to say even after formatting system and data, the wifi connects auto?
When you install a new rom, the phone takes you through a setup procedure where you need to provide the wifi details and a Google account. Does that not happen in your case?
nokiamodeln91 said:
So you mean to say even after formatting system and data, the wifi connects auto?
When you install a new rom, the phone takes you through a setup procedure where you need to provide the wifi details and a Google account. Does that not happen in your case?
Click to expand...
Click to collapse
No, it does. It takes me through the setup procedure where I provide the wifi details and a Google account.
But after setting up the phone, when I switch on wifi it connects to some old wifi networks automatically. Though some of the old networks require password.
Is there any way to restore phone to factory settings?
I mean to delete everything... pics, videos etc.
thats because the google account automatically syncs these to the phone.. other data on usb storage can be deleted by mounting it on the pc and formatting it.
My school's wifi signal very strong, 64MBs, but i can't connect, it always "Obtaining IP Address", loop.
Install wifi analyzer from the playstore and check other wifi signals, just to check your phone wifi. Can you try other wifi networks ?
Sent from my GT-N7000 using xda app-developers app
Phone turns off at any time and when power button is pressed it won't turn on.
Only when I pull out the battery or when I enter recovery and choose reboot system it will turn back on.
I just flashed a stock GB rom and everything is fine at the moment. I will leave it as it is to see how it will go...
I can't figure out what is wrong.
Hi guys
At first, thanks for the ROM, is really good, saved my phone from the old stock updated Samsung ROM.
But the WIFI doesn't connect whit nothing - I'm not talking about WIFI DIRECT, but WIFI LAN and INTERNET -. It appears that the phone is connecting whit the router, but after a second it stop trying to connect, and shows me that the lan is "Saved, secure by WPA/WPA2". It's work whit all the WIFI LANS i had tried to connect. May be something in the RADIO setings?
PS¹.: The Google Play doesn't connect too, even in a good sinal of 3G.
PS².: Sorry if someonse have already talked about this problem in this forum.
PS³.: I am brazilian, so, this phone is the brazilian model (4GB Memory), and I live in Brazil (if it's important for the network settings).
Did you try it to restart your modem?
Sure, several times.
I had tried too reinstall the ROM, several times.
I had intalled the Omni 4.4 ROM too, but doesn't work, the same problem. But in this last, the Google Play had worked.
Edit¹: I tryed to connect in diferents WiFi Lans: protected, open, Hot-spot.
Edit²: Updating: I install CM 11 Maclaw Rom, and the same happens: no conection whit the Google Play, and no connection whit any WiFi Lan.
does wifi connect with stock ROM?
PradeepMurugan said:
does wifi connect with stock ROM?
Click to expand...
Click to collapse
When i was whit the stock ROM (what indeed wasn't the stock ROM, because i had updated to Android 4 by ODIN, using a Portuguese ROM, because the Brazilian ROM wasn't ok yet), it was working ok.
Maybe that ROM has a data bug
Sent from my GT-I9070 using xda app-developers app
Phoneboot said:
Maybe that ROM has a data bug
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
All the 3: CM 10.2 TeamCanjica; OMNI 4.4; CM 11 NewMaclaw?
kelvinmaggi said:
All the 3: CM 10.2 TeamCanjica; OMNI 4.4; CM 11 NewMaclaw?
Click to expand...
Click to collapse
Wiped cache, dalvik cache and done factory reset?
shut_down said:
Wiped cache, dalvik cache and done factory reset?
Click to expand...
Click to collapse
Yeah, several times. Each time i tried to reinstall, or install another ROM, i did this.
Updating: Now i've back to 4.1.2 Samsung ROM and the Wi-fi is working ok.
So, whit a Samsung Touchwiz the device works, but when i put a cyanogenmod, no way. Any hint of why this ****ying thing happens?
CM all roms r buggy sheet -_- use harshjelly stable rom or slimbean :good:
it happends sometimes.
usually simple phone reboot or enable / disable ariplane mode helps
sometimes after reboot you are stuck with "enabling wifi" ... that actually never enables it
in such case I enable ariplane mode, remove enable wifi widget from home screen, reboot phone while still in airplane mode.
when phone boots it will not ask for pin to sim card as it is still in airplane mode.
disable airplane mode
enter pin to get into sim card
enable wifi manually
it works from now on (untill gets bugged again ) same procedure to fix it.
I also have this enabling Wifi problem sometimes with the new 01.04.14 CM 10.2 Build. Is this Bug new or did it also happen on older builds? On Stock Rom I have no problem.
I can fix it like th3cr0w explained. Sometimes waiting one or two minutes solves the problem, too.
archies20 said:
CM all roms r buggy sheet -_- use harshjelly stable rom or slimbean :good:
Click to expand...
Click to collapse
Slimbean is CM based ROM.
archies20 said:
CM all roms r buggy sheet -_- use harshjelly stable rom or slimbean :good:
Click to expand...
Click to collapse
I've tried a slimbean ROM, and not works too.
Maybe I'll try harshjelly.
th3cr0w said:
it happends sometimes.
usually simple phone reboot or enable / disable ariplane mode helps
sometimes after reboot you are stuck with "enabling wifi" ... that actually never enables it
in such case I enable ariplane mode, remove enable wifi widget from home screen, reboot phone while still in airplane mode.
when phone boots it will not ask for pin to sim card as it is still in airplane mode.
disable airplane mode
enter pin to get into sim card
enable wifi manually
it works from now on (untill gets bugged again ) same procedure to fix it.
Click to expand...
Click to collapse
I don't think its my problem. I tried the airplane mode test, and reboot.
@FringeNY
Its not happens in Stock ROMs, but in older CM ROMs there is this problem too.
archies20 said:
CM all roms r buggy sheet -_- use harshjelly stable rom or slimbean :good:
Click to expand...
Click to collapse
I've tried a slimbean ROM, and not works too.
Maybe I'll try harshjelly.
th3cr0w said:
it happends sometimes.
usually simple phone reboot or enable / disable ariplane mode helps
sometimes after reboot you are stuck with "enabling wifi" ... that actually never enables it
in such case I enable ariplane mode, remove enable wifi widget from home screen, reboot phone while still in airplane mode.
when phone boots it will not ask for pin to sim card as it is still in airplane mode.
disable airplane mode
enter pin to get into sim card
enable wifi manually
it works from now on (untill gets bugged again ) same procedure to fix it.
Click to expand...
Click to collapse
I don't think its my problem. I tried the airplane mode test, and reboot. But nothing had changed.*Edit
@FringeNY
Its not happens in Stock ROMs, but in older CM ROMs there is this problem too.
Hi
2 days ago i flashed Vanir 4.4.2 seemed to go without a problem was really loving the rom until i lost signal which was fixed by a reboot.
but only 5 min after i had reboot i lost signal again. this went on for the next day until this morning after completely formatting the fone iv fully lost signal reboot does not help i returned to my previous fully working rom (vanir 4.3) nothing worked the problem still persists.
as im typing this the fone got signal again but lost it again only seconds after.
im at a complete loss as to what to do any would would be much appreciated.
Roscoe
welcome to my nightmare... is something related with RIL created by CM team, and all CM based ROM have the same problem, try @Flying_Bear Tutorial and see if it works with you
http://forum.xda-developers.com/showthread.php?t=2496075
No one of kitkat roms is stable, so its normal.
For me this problems came from early versions of cm from 4.1 to 4.4
Sent from my LG-P880 using xda app-developers app
well now im stuck in another annoying situation . i tried to go back to stock with the KDZ flash tool but as im pretty stupid i didnt wipe my data so now im stuck in a boot loop.
:crying:
roscoe182 said:
well now im stuck in another annoying situation . i tried to go back to stock with the KDZ flash tool but as im pretty stupid i didnt wipe my data so now im stuck in a boot loop.
:crying:
Click to expand...
Click to collapse
If theres still CWM wipe and reflash if there isnt install one wipe then reflash im not sure if it works but i would do that
roscoe182 said:
well now im stuck in another annoying situation . i tried to go back to stock with the KDZ flash tool but as im pretty stupid i didnt wipe my data so now im stuck in a boot loop.
:crying:
Click to expand...
Click to collapse
You can always do an emergency flash using LGmobile Support Tool
balloon27 said:
You can always do an emergency flash using LGmobile Support Tool
Click to expand...
Click to collapse
iv tried it still in a boot loop.
roscoe182 said:
well now im stuck in another annoying situation . i tried to go back to stock with the KDZ flash tool but as im pretty stupid i didnt wipe my data so now im stuck in a boot loop.
:crying:
Click to expand...
Click to collapse
If i do remember correctly, We have stock recovery that can be used to format internal storage/data. Vol down + power?
[email protected] said:
If i do remember correctly, We have stock recovery that can be used to format internal storage/data. Vol down + power?
Click to expand...
Click to collapse
vol down takes me to the software upgrade screen.
vol up does take me to a screen that says recovery mode but that says its data back up for a service center.
roscoe182 said:
vol down takes me to the software upgrade screen.
vol up does take me to a screen that says recovery mode but that says its data back up for a service center.
Click to expand...
Click to collapse
Unplug and Power on your phone together by vol down + power button. AFAIK,only if you plug in and press vol down, you will go into software mode.
[email protected] said:
Unplug and Power on your phone together by vol down + power button. AFAIK,only if you plug in and press vol down, you will go into software mode.
Click to expand...
Click to collapse
this wasn't working for me at the time. causing a bootloop .... which lasted for about 4 hours until the fone decided it wanted to finally boot into recovery.
thanx for all the help with the boot loop folks its much appreciated.
donkanmcklaus said:
welcome to my nightmare... is something related with RIL created by CM team, and all CM based ROM have the same problem, try @Flying_Bear Tutorial and see if it works with you
http://forum.xda-developers.com/showthread.php?t=2496075
Click to expand...
Click to collapse
thanks i will try this later when im at home, i tried to flash just the baseband but i had no luck with that. this does describe my problem a bit more accurately so i will definitely try this as soon as i can thanks again.
donkanmcklaus said:
welcome to my nightmare... is something related with RIL created by CM team, and all CM based ROM have the same problem, try @Flying_Bear Tutorial and see if it works with you
http://forum.xda-developers.com/showthread.php?t=2496075
Click to expand...
Click to collapse
didn't work .. infact didn't seem to do anything at all. thanks any ways.
i have been trying this but i dont really understand it to well
http://forum.xda-developers.com/showthread.php?t=2329768
Guess im a bit screwed then. shame cus its a great fone and the customs roms were amazing until this major problem.
roscoe182 said:
Guess im a bit screwed then. shame cus its a great fone and the customs roms were amazing until this major problem.
Click to expand...
Click to collapse
hey, did you try this? http://forum.xda-developers.com/showthread.php?t=2630381 that works for me, my dropping signal issues dissapear changing the baseband to v10h
donkanmcklaus said:
hey, did you try this? http://forum.xda-developers.com/showthread.php?t=2630381 that works for me, my dropping signal issues dissapear changing the baseband to v10h
Click to expand...
Click to collapse
il give it a go but its not a signal drop its zero signal,imie and baseband
roscoe182 said:
il give it a go but its not a signal drop its zero signal,imie and baseband
Click to expand...
Click to collapse
if you flash a stock based rom you recover your imei and baseband?
donkanmcklaus said:
if you flash a stock based rom you recover your imei and baseband?
Click to expand...
Click to collapse
iv flashed back to stock more than once and nothing has worked.
roscoe182 said:
iv flashed back to stock more than once and nothing has worked.
Click to expand...
Click to collapse
there's a solution that worked for me when I had my LG p990 and it happens the same issue that you are experiencing
1. Connect phone by USB
2. Enter 3845#*880# in dialer
3. Select Port Settings -> Select CP USB
4. Start hyperterminal, in COM settings select same port like in devide manager -> LGE mobile USB Serial Port, 115200
5. Type AT if response is not OK, change port number
6. Type at%imei, it should display your current IMEI
7. Type at%imei=x,x,x,x,x,x,x,x,x,x,x,x,x,x,x , where x,x,x... is your orginal IMEI number
8. Reset
only works on stock based rom, maybe you should try, you need a pc with hyperterimal
Hello,
I'm posting this in case anyone else has had this problem. If anyone has advice, that would be great too, of course.
I've been running my rooted S3 Mini on Maclaw's CM11 for about 20 days. (My carrier: Life Mobile, which is a UK carrier.)
Yesterday morning I updated to the 26th January stable release (20140126). I used ADB to push the file to the internal SDcard, then booted into recovery (clockwork), and installed the update. The phone started up just fine. I used it for about 12 hours with no trouble. Then, all of a sudden, it froze. I think I then powered it down with an extended press of the power button, expecting to be able to power it up again a minute later. But it has turned into a hard brick. To be specific: The power button doesn't turn it on, i.e. doesn't give the little haptic buzz, and doesn't do /anything/ to the screen. Neither three-button combination works either.
I've taken out the battery, waited a few minutes, put it back in. The phone wasn't particularly low on power, but I plugged it into the charger for over an hour. I've used another charger (the USB cable to my laptop, to be precise -- perhaps that doesn't count?). No sign of life at all, not even a flicker.
Everything I've read about bricking, especially hard-bricking, suggests that if it happens due to mis-romming, it happens straight away -- my update worked for 12 hours, so I'm puzzled. I hadn't recently dropped the phone, and I hadn't got it wet.
The action I was performing when it froze /may/ be informative(?) I was trying to change the "storage" location for my Osmand app (a google maps replacement that uses OpenStreetMap data, and offers the option of saving several maps to storage to save on mobile data) from internal to external SDcard. The maps are already in my external SDcard -- I just wanted Osmand to realise that they are there. I can't fathom why that would freeze the phone, let alone brick it, but someone may know more than me. (Did I unwittingly put in the wrong directory and get osmand to overwrite something imporant!?)
Does anyone have any idea what can have happened to my phone? Thanks in advance.
Srdgh
Srdgh said:
Hello,
I'm posting this in case anyone else has had this problem. If anyone has advice, that would be great too, of course.
I've been running my rooted S3 Mini on Maclaw's CM11 for about 20 days. (My carrier: Life Mobile, which is a UK carrier.)
Yesterday morning I updated to the 26th January stable release (20140126). I used ADB to push the file to the internal SDcard, then booted into recovery (clockwork), and installed the update. The phone started up just fine. I used it for about 12 hours with no trouble. Then, all of a sudden, it froze. I think I then powered it down with an extended press of the power button, expecting to be able to power it up again a minute later. But it has turned into a hard brick. To be specific: The power button doesn't turn it on, i.e. doesn't give the little haptic buzz, and doesn't do /anything/ to the screen. Neither three-button combination works either.
I've taken out the battery, waited a few minutes, put it back in. The phone wasn't particularly low on power, but I plugged it into the charger for over an hour. I've used another charger (the USB cable to my laptop, to be precise -- perhaps that doesn't count?). No sign of life at all, not even a flicker.
Everything I've read about bricking, especially hard-bricking, suggests that if it happens due to mis-romming, it happens straight away -- my update worked for 12 hours, so I'm puzzled. I hadn't recently dropped the phone, and I hadn't got it wet.
The action I was performing when it froze /may/ be informative(?) I was trying to change the "storage" location for my Osmand app (a google maps replacement that uses OpenStreetMap data, and offers the option of saving several maps to storage to save on mobile data) from internal to external SDcard. The maps are already in my external SDcard -- I just wanted Osmand to realise that they are there. I can't fathom why that would freeze the phone, let alone brick it, but someone may know more than me. (Did I unwittingly put in the wrong directory and get osmand to overwrite something imporant!?)
Does anyone have any idea what can have happened to my phone? Thanks in advance.
Srdgh
Click to expand...
Click to collapse
No man cant help when it wont boot but does offline charging works? if it works then try to go to download mode a repeated times u may get in to it eventually happend to me once butnever do a power off again like when copying anything
it may go to service center
and hey forgot try adb for download mode
Thanks
Thanks a lot for the response.
I don't think offline charging is working. The screen has been 100% black (i.e. off) 100% of the time since this happened. It /might/ be charging, but it's not telling me in any way.
Been repeatedly trying three-button combo for download mode all day -- to no avail.
Am I missing something about ADB? -- I thought you needed the phone to be on for ADB to be able to detect the device? Command "adb devices" yields nothing, and "adb reboot download" yields "error: device not found".
Thanks for the advice about power-off while copying. I guess this has to be what went wrong. What I was doing wasn't anything like transferring a multi-megabyte file -- it was simply saving a different setting (i.e. a different filepath) into the osmand "storage" options, but maybe osmand then started a copying process.
I will try service centre and re-post here when I hear back. I should possibly have entitled this post "sudden death" rather than brick.
Same Here
i have the same problem, but after a day or so it started charging, i tried flashing back stock rom but is in constant bootloop
odin didn't gave me any error, but in recovery i get errors cann't mound /sdcard, cann't open /cache/recovery/log
geo_stef said:
i have the same problem, but after a day or so it started charging, i tried flashing back stock rom but is in constant bootloop
odin didn't gave me any error, but in recovery i get errors cann't mound /sdcard, cann't open /cache/recovery/log
Click to expand...
Click to collapse
You should go in stock recovery and do a wipe normally the bootloop should be over
Verstuurd vanaf mijn GT-I8190 met Tapatalk
robintjeuuu said:
You should go in stock recovery and do a wipe normally the bootloop should be over
Verstuurd vanaf mijn GT-I8190 met Tapatalk
Click to expand...
Click to collapse
tomorrow i'll test to flash stock recovery from odin
geo_stef said:
tomorrow i'll test to flash stock recovery from odin
Click to expand...
Click to collapse
Normally, when you flash stock firmware, your recovery is also back to stock
Verstuurd vanaf mijn GT-I8190 met Tapatalk
robintjeuuu said:
Normally, when you flash stock firmware, your recovery is also back to stock
Verstuurd vanaf mijn GT-I8190 met Tapatalk
Click to expand...
Click to collapse
i've tried to flash stock recovery via odin but when i enter recovery it shows up CWM
Then try to do the Factory reset there
Verstuurd vanaf mijn GT-I8190 met Tapatalk
robintjeuuu said:
Then try to do the Factory reset there
Verstuurd vanaf mijn GT-I8190 met Tapatalk
Click to expand...
Click to collapse
I am not able to flash stock recovery
geo_stef said:
I am not able to flash stock recovery
Click to expand...
Click to collapse
Ok, so, you can open cwm recovery and enter download mode? in cwm you can do a wipe, you should wipe data and cache
robintjeuuu said:
Ok, so, you can open cwm recovery and enter download mode? in cwm you can do a wipe, you should wipe data and cache
Click to expand...
Click to collapse
I can enter cwm and do the wipe, but get some errors like cann't mount sdcard or cann't open logs
also i am able to enter download mode.
geo_stef said:
I can enter cwm and do the wipe, but get some errors like cann't mount sdcard or cann't open logs
also i am able to enter download mode.
Click to expand...
Click to collapse
Search on this forum how to unbrick this device and do everything it says, good luck..