My wife and I recently picked up a pair of Incredibles, so the next obvious step is to invest in the required accessories. We've already ordered (but have not yet received) an Otterbox Commuter case and Seidio Innocase Active case. I was about to order some additional micro usb cables as well as a pair of car chargers, but a comment in another thread got me thinking. Is there an issue with either of those cases not allowing a "standard" micro usb connector to reach through the case opening? The OEM cable has a much slimmer connector than the one on the car charger. Anyone owning either of these cases had any issues?
Thanks!
-=Zzedly=-
I have used the Seidio Innocase Active for months now and just received my Otterbox Commuter by mail today. Neither pose an issue with the micro usb cables. I've used several different ones. I ordered the commuter because of its smoother back, improved durability, and because I've heard that it's much easier to push the power/volume buttons with it- and it's no lie!
I have the HDMI docking station and it has a removable sleeve so that the extended battery or a case can be on the phone while docking. Does the standard case have the same capabilty?
I have a cheap ebay TPU case and it fits perfectly in there with the sleeve removed.
Not sure if you meant standard case or standard dock, but yes, the standard dock does have the removable insert for working with a case on the phone. Now all we need is a decent hard case that will actually fit in the docks... I'm not a huge fan of the silicone cases and I didn't have much luck with the incipio or the shell/holster fitting the car dock I'm sure they'll be coming soon enough.
soul777toast said:
Not sure if you meant standard case or standard dock, but yes, the standard dock does have the removable insert for working with a case on the phone. Now all we need is a decent hard case that will actually fit in the docks... I'm not a huge fan of the silicone cases and I didn't have much luck with the incipio or the shell/holster fitting the car dock I'm sure they'll be coming soon enough.
Click to expand...
Click to collapse
I hate silicon cases also, have you ever tried TPU? Verizon sells one that they call High Gloss Silicon but it is a very firm molded case and nothing like silicon.
soul777toast said:
Not sure if you meant standard case or standard dock, but yes, the standard dock does have the removable insert for working with a case on the phone. Now all we need is a decent hard case that will actually fit in the docks... I'm not a huge fan of the silicone cases and I didn't have much luck with the incipio or the shell/holster fitting the car dock I'm sure they'll be coming soon enough.
Click to expand...
Click to collapse
Exactly what I was looking for thanks. Want to order one online and had not seen one yet.
lembowski said:
I have a cheap ebay TPU case and it fits perfectly in there with the sleeve removed.
Click to expand...
Click to collapse
It is fit but no connection to charge the phone. I have tried TPU case in car dock and standard dock but both have problems with connection.
I have the shell/holster and I can get it to charge in the standard dock but the dock app will not launch. I usually just pop the shell off and let it charge that way at night. I do have the extended battery but the shell already accommodates that so it doesn't make a difference for the dock.
Side note: The audio output of the standard dock seems to work through the USB of the Bionic, it's not as loud as the headphone jack tho.
mikecheat04 said:
I have the shell/holster and I can get it to charge in the standard dock but the dock app will not launch. I usually just pop the shell off and let it charge that way at night. I do have the extended battery but the shell already accommodates that so it doesn't make a difference for the dock.
Side note: The audio output of the standard dock seems to work through the USB of the Bionic, it's not as loud as the headphone jack tho.
Click to expand...
Click to collapse
I have the shell/holster case also and it does fit and the dock apps do launch. There is a plastic filler that has to be removed in order to make the proper connection. This is a much better design from Moto than on the DX.
fourmatc said:
I have the shell/holster case also and it does fit and the dock apps do launch. There is a plastic filler that has to be removed in order to make the proper connection. This is a much better design from Moto than on the DX.
Click to expand...
Click to collapse
Oh okay ill have to try that again when I get home, thanks for the tip
Sent from my DROID BIONIC using xda premium
For anyone who's been wanting one but couldn't bring themselves to cough up seventy bucks for it, it looks like Dell is clearing out their inventory on their website -
only $20.03 + tax and FREE standard shipping! Here's the link...
http://accessories.us.dell.com/sna/...e_bnrank=1&baynote_irrank=0&~ck=baynoteSearch
ENJOY!
I almost ordered my S7 with the Otterbox from Dell in November but the delivery date for the S7 was early January and the Otterbox was in February.
Woohoo! Just Bought 2!!
Thanks!!!!
There's a thanks button for that
Anyone know if it fits in the dock with the case on?
Mysticales said:
Anyone know if it fits in the dock with the case on?
Click to expand...
Click to collapse
LOL! I asked the exact same question in the other Otterbox thread! Guess I'll be able to answer the question myself here in about 4 days...
Great please let us know and take a picture if you can. Cause that would be the deciding factor for me. I wont get it if I cant dock it. DS7 + Dock is great for gaming. Trying to take off the case all the time would suck and not be worth it.
Mysticales said:
Great please let us know and take a picture if you can. Cause that would be the deciding factor for me. I wont get it if I cant dock it. DS7 + Dock is great for gaming. Trying to take off the case all the time would suck and not be worth it.
Click to expand...
Click to collapse
I have the OtterBox case but no docking station. I assume that it plugs into the multi-pin bottom port. The case adds some added thickness around the whole S7 plus a soft rubber bumper which a flap covering the port. The flap opens, hinged on the top or screen side and wraps around the under on the bottom. With the standard OEM cord plugged in, the flap extends past the plug by a good 1/4". Want a picture of cord plugged in?
Did a search for the docking station and found this review page: Docking Station. One of the posts state that they have to remove the OtterBox to dock!
wptski said:
Did a search for the docking station and found this review page: Docking Station. One of the posts state that they have to remove the OtterBox to dock!
Click to expand...
Click to collapse
Well that really STINKS! I'm thinking that maybe using the back rest plate for the Streak 5 (it comes with the docking kit) will make it work. That back rest plate is curved to allow for a slightly thicker device to fit into the dock.
If it really can't be made to work then the case will have to go. I won't give up my dock - I like it so much I bought 2 of them....
EDIT: I just dug out the Streak 5 back rest plate and looked it over. It is actually curved the opposite way (compared to what I was thinking) to make it work with a THINNER device - not a thicker one.
Sad to say, but this is NOT looking very promising. I may actually have to make a new back rest plate. The big question will be whether the connector in the docking station will plug far enough into the socket with the case on the unit...
Yea if I have to remove it, then no, I dont need the outterbox. I mean I already hate that I cant dock my zune cause I use the hard case on it (official one) What I wish is if docks made extension cords for it.. Imagine use extension on the dock and you could least get features of dock even if it wasnt sitting in it. That or a block you add on top of the dock to fit with cases.
Anyone know a GOOD decent case that the dock would fit with?
is this the rubber case like the DS5 Otterbox? the one that you had to stretch around, but still held well, or the one that is a complete b*tch to get off once it's on?
I ordered this and got it next day. It's a four piece case. There is a rubber "skin" that goes over the hard shell. It's not the easiest thing to get off, no.
Well, I got my OtterBox today. Nice case - pretty much the ultimate in protection.
BUT unfortunately, there's no way to make it fit into the dock with the case on and since it won't just slip easily out of the case, that's a deal breaker for me.
Unless someone here wants to buy it for what I paid for it I'll be sending it back...
Ok so we know that this doesnt work, sucks, but sadly the dock is a vital thing to have on the counter. Easy to keep in view, hook up to the tv, and works wonders for playing emulators on and easy to see. =)
So we need to figure out which case we can use. Was thinking about a simple cover on it. Rubber maybe ok but I need to find a good one that doesnt "sweat" or make a smell after being on it for ages. Then we need one that fits the dock.
Yeah, I just ordered one of the $5 silicon cases of eBay. We'll see how it works out. I'll keep you posted...
Ordered mine, since I'm not having much luck getting a dock at a decent price figured I might as well since the defender is one of the best case options I've seen for the Streak 7
Yeah, if I didn't have and use the dock I'd definitely keep the OtterBox. I ordered a 2-pack of "military grade film" screen protectors and a silicon skin case from eBay. Combined they were a whopping $10.98
I know its not going to be the same level of protection as the OtterBox, but it should be enough to protect it from day to day knocks, bumps, and bruises. I may also get one of those neoprene slip cases for it...
TesseractSpace said:
Ordered mine, since I'm not having much luck getting a dock at a decent price figured I might as well since the defender is one of the best case options I've seen for the Streak 7
Click to expand...
Click to collapse
http://www.all4cellular.com/dell-streak-7-home-audio-video-dock.html 50$ on sale. There are some aftermarket ones too for 25$ but those ONLY charge and sync, no hdmi and so, which honestly, is rather pointless in terms of the streak, since hdmi is nice.
RCounts said:
Yeah, if I didn't have and use the dock I'd definitely keep the OtterBox. I ordered a 2-pack of "military grade film" screen protectors and a silicon skin case from eBay. Combined they were a whopping $10.98
I know its not going to be the same level of protection as the OtterBox, but it should be enough to protect it from day to day knocks, bumps, and bruises. I may also get one of those neoprene slip cases for it...
Click to expand...
Click to collapse
I put a Zagg screen protector on mine.
Got the cheapo skin case the other day. It is just thick enough to keep the Streak from fitting into the docking station.
So I got out a pair of small sharp scissors and enlarged the hole for the bottom connector until it exposed the whole area around the docking connector where it makes contact with the docking station.
That still didn't quite solve the problem. The thickness of the case on the back of the unit where it leans against the clear plexiglass "backstop" moves it forward on the docking station to the point that the connectors don't line up properly.
So the next step was to make a new "backstop" out of thinner plastic. I had an old hotel key card lying around and that worked great. Just the right thickness, and stiffness, yet easy to cut to match the shape of the tabs across the bottom.
Since it is much thinner than the slot in the base I filled in the slot with a little hot glue. That way I can always remove it easily if I choose to since the hot glue doesn't stick that well to hard non-porous surfaces.
I've searched about a bit and found no info on whether or not the Pogo charger will work with specific cases. Specifically for me, I just received a Poetic Revolution case and took note of the relatively small opening around the Pogo port. If anyone has both a Revolution case and a Pogo charger, would you mind telling us whether these accessories work together nicely? Also, information about the compatibility of other cases with the Pogo charger may be helpful to others looking to buy one thing or another.
POGO cable + Poetic hardback is a winner for me! The cut out for the connector is perfect.
Sent from my Nexus 10 using xda app-developers app
I have the moko keyboard case, and am using it now. I have not received my Pogo charger yet. The cutout for the connector is only in the material that holds the tablet inside the case. There is no cutout for the Pogo cable in the backbone or spine of the case. The case is minimal in size. While I do not believe that making a cutout would be hard, I believe the Pogo connector will get in the way of how the tablet is propped up.
Sent from my Nexus 10 using xda premium
noobineer said:
I have the moko keyboard case, and am using it now. I have not received my Pogo charger yet. The cutout for the connector is only in the material that holds the tablet inside the case. There is no cutout for the Pogo cable in the backbone or spine of the case. The case is minimal in size. While I do not believe that making a cutout would be hard, I believe the Pogo connector will get in the way of how the tablet is propped up.
Sent from my Nexus 10 using xda premium
Click to expand...
Click to collapse
Poetic slimbook case works perfectly! I have it.
I bought this set for the tpu case but it came with lots of extras
Otg cable, 3.5 mm to 3.5mm, 3.5mm splitter, ear buds with answer call button, USB cable, retractable USB cable, 2100ma wall wort, car adaptor, hard rubber tpu, fake leather book case, screen protector, necklace felt storage bag, a stylus.
The book case is well made but I did not like the fit the buttons at the bottom had a cutout the rest of the bezel was covered in the fake leather.
The tpu case I liked a lot more it fit well just grippy enough still had to make 2 holes in it for the ir blaster and the 2nd microphone.
Otg not supported on the tab 3 I used my s3 to test the cable and it worked. I have a zagg protector on my tab ATM when it gets worn out I'll try out the one that came with this kit I feel like the kit is on the cheap side definitely not worth the 99.99 amazon says it retails for but for all you get it is worth getting at what i paid. I paid 32.99 with free shipping at amazon it was on sale when the tab 3 first came out for 26 i really wish i had jumped on it then.
A note about what i received they say they will give a fish bone wire keeper for the headphones but what i received was the otg cable. Looking at the entry for it on amazon the 10.1 comes with a otg cable so i doubt anyone will get the fish bone wire keeper.
Sent from my SM-T210 using xda app-developers app