Related
Hey Guys,
my name is Marius and I´m from Berlin/Germany.
I bought a HTC One from Vodafone.
after some a while I get root and installed Cyanogenmod.
but I wanted an Original HTC android an so I get S-OFF an SuperCID.
Then I tried to flash an Original HTC RUU bu something went wrong.
it´s back to S.On an another try.. nothing... just failure about securecheck and something like that.
when it starts up it just go to Fastboot-Mode and nothing happens.
I tried to flash CWM again but it doesnt´t work.
Tried to flash the Vodafone Firmware. it also doesn´t work.
Is there anybody, who can help me?
or is there a RUU which works with evere CID an version??
CID is back to HTC__102 becouse of the RUU try.
thanks for your help.
Marius
Phago_Z said:
Hey Guys,
my name is Marius and I´m from Berlin/Germany.
I bought a HTC One from Vodafone.
after some a while I get root and installed Cyanogenmod.
but I wanted an Original HTC android an so I get S-OFF an SuperCID.
Then I tried to flash an Original HTC RUU bu something went wrong.
it´s back to S.On an another try.. nothing... just failure about securecheck and something like that.
when it starts up it just go to Fastboot-Mode and nothing happens.
I tried to flash CWM again but it doesnt´t work.
Tried to flash the Vodafone Firmware. it also doesn´t work.
Is there anybody, who can help me?
or is there a RUU which works with evere CID an version??
CID is back to HTC__102 becouse of the RUU try.
thanks for your help.
Marius
Click to expand...
Click to collapse
What is your bootloader status? Locked or unlocked? Make sure it is locked or relocked
After that go to fastboot mode
Go to your ADB/Fastboot files map on your pc whit MSDOS
Type then this:
fastboot oem rebootRUU
wait till device is booted in ruu mode
the type fastboot flash zip xxxxx.zip
(xxxxx is the your ruu file has) (your ruu file must be a ZIP file and located in your adb folder!!!!!!!!!)
This wil work
Remeber Downgrade is only posible whit Super-cid
Phago_Z said:
Hey Guys,
my name is Marius and I´m from Berlin/Germany.
I bought a HTC One from Vodafone.
after some a while I get root and installed Cyanogenmod.
but I wanted an Original HTC android an so I get S-OFF an SuperCID.
Then I tried to flash an Original HTC RUU bu something went wrong.
it´s back to S.On an another try.. nothing... just failure about securecheck and something like that.
when it starts up it just go to Fastboot-Mode and nothing happens.
I tried to flash CWM again but it doesnt´t work.
Tried to flash the Vodafone Firmware. it also doesn´t work.
Is there anybody, who can help me?
or is there a RUU which works with evere CID an version??
CID is back to HTC__102 becouse of the RUU try.
thanks for your help.
Marius
Click to expand...
Click to collapse
can you post a "fastboot getvar all" (remove IMEI and s/n) and a screenshot of your bootloader.
c:\SWP\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.161.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 3730mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.054s
also also tried to flash a firmware an some diffrent RUU´s
I can´t change the cid I have S-On
Bootloader in relocked
Phago_Z said:
c:\SWP\adb>fastboot getvar all
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-main: 2.24.161.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_ul
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__102
Click to expand...
Click to collapse
hboot 1.44 but firmware 2.24, hmm
1- do you have a functioning ROM? yes -> try to get s-off using revone
2- get a new unlocktocken from HTCdev and unlock your bootloader
hmmm
nkk71 said:
hboot 1.44 but firmware 2.24, hmm
1- do you have a functioning ROM? yes -> try to get s-off using revone
2- get a new unlocktocken from HTCdev and unlock your bootloader
hmmm
Click to expand...
Click to collapse
1) I can´t use revone. I cant put it to the phone.
and adb shell doesn´t work. my problem is that I cant flash any rom something else.
CWM is not available
very good message
jipiiii
its alive
thats für the tip with bootloader unlock.
after i´ve done this, it starts automaticly
I`m so happy
Phago_Z said:
jipiiii
its alive
thats für the tip with bootloader unlock.
after i´ve done this, it starts automaticly
I`m so happy
Click to expand...
Click to collapse
good, keep it unlocked until you s-off!!
"relocked" mit keinem RUU, ist absolut Sch**sse, also pass auf!
(forum rules: english): either stay unlocked, and/or get s-off. if you end up in a situation with a locked or relocked bootloader and the unlocktocken doesnt work you are STUCK!!
Ich wuerde sagen: get S-Off.
Please help, I have a big problem!
I accidently flashed a rom that required S-off but my device is S-on and now it keeps rebooting. After that I tried to install Stock Sense(fflashable .zip) but when it almost completed, it failed. Now if I reboot it it doesn't go further than the HTC logo screen. I did some research to flash the stock sense on it but I don't know which RUU I have to flash. My the device is the international version unlocked (m7ul). My radio is radio-4a.17.3250.14
my getvar:
bootloader version: 0.5
version-bootloader: 1.54.0000
version-baseband: 4A.17.3250.14
version-clpd: None
version-microp: None
version-main:
version-misc: PUT SHIP S-ON
serialno:
imei:
meid: 000000000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC_E11
battery-status: good
battery-voltage: 3914 mV
partition-layout: Generic
security: on
build-mode: ship
boot-mode: fastboot
commitno-bootloader: dirty-d959c75800
hbootpreupdate: 11
gencheckpt: 0
all: Done!
finished. Total time 0.048s
Please help me
Thanks
LMH1998 said:
Please help, I have a big problem!
I accidently flashed a rom that required S-off but my device is S-on and now it keeps rebooting. After that I tried to install Stock Sense(fflashable .zip) but when it almost completed, it failed. Now if I reboot it it doesn't go further than the HTC logo screen. I did some research to flash the stock sense on it but I don't know which RUU I have to flash. My the device is the international version unlocked (m7ul). My radio is radio-4a.17.3250.14
my getvar:
bootloader version: 0.5
version-bootloader: 1.54.0000
version-baseband: 4A.17.3250.14
version-clpd: None
version-microp: None
version-main:
version-misc: PUT SHIP S-ON
serialno:
imei:
meid: 000000000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC_E11
battery-status: good
battery-voltage: 3914 mV
partition-layout: Generic
security: on
build-mode: ship
boot-mode: fastboot
commitno-bootloader: dirty-d959c75800
hbootpreupdate: 11
gencheckpt: 0
all: Done!
finished. Total time 0.048s
Please help me
Thanks
Click to expand...
Click to collapse
read this thread to look for your stock ROM: here and flash it
then if you want S-OFF then follow this detailed guide: here
kamilmirza said:
read this thread to look for your stock ROM: here and flash it
if you want S-OFF then follow this detailed guide: here
Click to expand...
Click to collapse
I don't get any devica-main code so I really don't know which one to download, but I've downloaded one, but when I try to flash it, It always fails at: (boatloader) checking signature.
LMH1998 said:
I don't get any devica-main code so I really don't know which one to download, but I've downloaded one, but when I try to flash it, It always fails at: (boatloader) checking signature.
Click to expand...
Click to collapse
this is because you the tried to flash something (ROM or any other package) with S-ON
you have to flash it with custom recovery, CWM or TWRP
which one you selected?
kamilmirza said:
this is because you the tried to flash something (ROM or any other package) with S-ON
you have to flash it with custom recovery, CWM or TWRP
which one you selected?
Click to expand...
Click to collapse
So I'll tell you my story.
First it was on sense, then I installed OneDroid using TWRP v2.6.3.3, It worked perfectly fine but battery drain was to bad so I decided to return to Sense, so I flashed a flashable .zip. Eveyrthing worked ok. Then I heard that AOKP had better battery life so I downloaded it, but it didn't want to install, It kept saying ERROR. Then I've thought of flashing the Google Play Edition. So here everything went wrong. it tried to flash with TWRP but It got failed aswell. then I flashed CWM on it, installed the Google Play Edition rom and rebooted my phone, after 3 seconds it reboots, and it keeps on rebooting. but eventually I got back into Recovery and flashed the Sense rom that I still had on my phone. But when I was installing that, It got failed. Then I tried to flash TWRP to install the Sense rom, but after I flashed TWRP, I couldn't go back into recovery. Then the phone get stuck on the HTC logo screen.
So now I want to flash Sense with RUU but I don't know which one to install and it fails when I flash the .zip with cmd. It fails at "checking signature".
PLEASE PEOPLE HELP ME, it's my brother phone's and I messed up
LMH1998 said:
So I'll tell you my story.
First it was on sense, then I installed OneDroid using TWRP v2.6.3.3, It worked perfectly fine but battery drain was to bad so I decided to return to Sense, so I flashed a flashable .zip. Eveyrthing worked ok. Then I heard that AOKP had better battery life so I downloaded it, but it didn't want to install, It kept saying ERROR. Then I've thought of flashing the Google Play Edition. So here everything went wrong. it tried to flash with TWRP but It got failed aswell. then I flashed CWM on it, installed the Google Play Edition rom and rebooted my phone, after 3 seconds it reboots, and it keeps on rebooting. but eventually I got back into Recovery and flashed the Sense rom that I still had on my phone. But when I was installing that, It got failed. Then I tried to flash TWRP to install the Sense rom, but after I flashed TWRP, I couldn't go back into recovery. Then the phone get stuck on the HTC logo screen.
So now I want to flash Sense with RUU but I don't know which one to install and it fails when I flash the .zip with cmd. It fails at "checking signature".
PLEASE PEOPLE HELP ME, it's my brother phone's and I messed up
Click to expand...
Click to collapse
are you on TWRP?
if so when you select the ROM to flash, uncheck the verification md5 something
kamilmirza said:
are you on TWRP?
if so when you select the ROM to flash, uncheck the verification md5 something
Click to expand...
Click to collapse
I can't get back into recovery. Getting into the boatloader is the only thing I can do
Please try to find me the right RUU and a RUU that doesn't requires S-off, that would be awesome!
LMH1998 said:
I can't get back into recovery. Getting into the boatloader is the only thing I can do
Please try to find me the right RUU and a RUU that doesn't requires S-off, that would be awesome!
Click to expand...
Click to collapse
tell me your CID, can you remember your main?
flash TWRP via fastboot method (bootloader)
kamilmirza said:
tell me your CID, can you remember your main?
flash TWRP via fastboot method (bootloader)
Click to expand...
Click to collapse
Sorry but I'm super noob in HTC ONE devolpment, I'm more into Xperia devolping but where can I find the CID?
I really can't remember the main.
but the device is bought in Belgium, Europe. Maybe that can help you to find it.
LMH1998 said:
I can't get back into recovery. Getting into the boatloader is the only thing I can do
Please try to find me the right RUU and a RUU that doesn't requires S-off, that would be awesome!
Click to expand...
Click to collapse
i understand you are anxious, but please calm down, before you end up with a brick; (and please don't cross-post, it just get's everybody confused)
I'll be back in a little while, but in the meantime can you confirm,
1- you have bootloader unlocked
2- what OS are you running (Win7 / 8 / 8.1, Ubuntu, Mac)
3- do not type the output of "fastboot getvar all", use copy/paste
nkk71 said:
i understand you are anxious, but please calm down, before you end up with a brick; (and please don't cross-post, it just get's everybody confused)
I'll be back in a little while, but in the meantime can you confirm,
1- you have bootloader unlocked
2- what OS are you running (Win7 / 8 / 8.1, Ubuntu, Mac)
3- do not type the output of "fastboot getvar all", use copy/paste
Click to expand...
Click to collapse
1. I relocked the boatloader because I watched a tutorial on how to flash stock rom so my boatloader is locked.
2. I'm running Windows 7 64bit Ultimate
3. C:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 4062mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.046s
LMH1998 said:
1. I relocked the boatloader because I watched a tutorial on how to flash stock rom so my boatloader is locked.
2. I'm running Windows 7 64bit Ultimate
3. C:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxx
(bootloader) imei: xxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 4062mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.046s
Click to expand...
Click to collapse
remove your SERIALNO and IMEI from your post
be patient and good luck :good:
@nkk71 will guide you through and now you are in good hands
kamilmirza said:
remove your SERIALNO and IMEI from your post
be patient and good luck :good:
@nkk71 will guide you through and now you are in good hands
Click to expand...
Click to collapse
i hope you're right.
---------- Post added at 09:07 PM ---------- Previous post was at 09:05 PM ----------
LMH1998 said:
1. I relocked the boatloader because I watched a tutorial on how to flash stock rom so my boatloader is locked.
2. I'm running Windows 7 64bit Ultimate
3. C:\fastboot>fastboot getvar all
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_ul
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__E11
finished. total time: 0.046s
Click to expand...
Click to collapse
so hboot 1.54 (HTC__E11) = 2.24.401.x firmware.
so first, get yourself unlocked again, we need s-off
use HTCdev to get an unlock token and unlock...
[/QUOTE]so hboot 1.54 (HTC__E11) = 2.24.401.x firmware.
so first, get yourself unlocked again, we need s-off
use HTCdev to get an unlock token and unlock...[/QUOTE]
I unlocked my bootloader again
nkk71 said:
i hope you're right.
---------- Post added at 09:07 PM ---------- Previous post was at 09:05 PM ----------
so hboot 1.54 (HTC__E11) = 2.24.401.x firmware.
so first, get yourself unlocked again, we need s-off
use HTCdev to get an unlock token and unlock...
Click to expand...
Click to collapse
I unlocked my boatloader again
LMH1998 said:
I unlocked my boatloader again
Click to expand...
Click to collapse
:good::good:
do you have a functioning ROM? you'll need to use rumrunner to get s-off
i believe you need a rooted ROM, preferably with unsecured kernel.
what recovery are you on, and what ROM?
nkk71 said:
:good::good:
do you have a functioning ROM? you'll need to use rumrunner to get s-off
i believe you need a rooted ROM, preferably with unsecured kernel.
what recovery are you on, and what ROM?
Click to expand...
Click to collapse
Tha problem is that I don't have any ROM on it now, but I do have a ROM on the memory of the phone(Sense rom) and I'm using TWRP v2.6.3.3 but I can't go into recovery Don't know why...
Nevermind I can get back into recovery but everything got erased
LMH1998 said:
Tha problem is that I don't have any ROM on it now, but I do have a ROM on the memory of the phone(Sense rom) and I'm using TWRP v2.6.3.3 but I can't go into recovery Don't know why...
Nevermind I can get back into recovery but everything got erased
Click to expand...
Click to collapse
i need to go for about an hour (+ or -), can you check your PM....
nkk71 said:
i need to go for about an hour (+ or -), can you check your PM....
Click to expand...
Click to collapse
Yeah ok I can do that.
and btw my CID is HTC__E11
LMH1998 said:
Yeah ok I can do that.
and btw my CID is HTC__E11
Click to expand...
Click to collapse
Sorry didn't come back yesterday, but I'll be online a bit later...
In the meantime, flash the ROM I sent you, and use http://rumrunner.us/ to get s-off
to get the rom to your phone, go to custom recovery (CWM or TWRP), then use one of the following methods:
1- OTG cable
2- adb push <name of rom>.zip /data/media/0/
3- adb sideload <name of rom>.zip
example of adb push:
Code:
C:\ADB2>[B]adb push Guru_Reset_M7_3.62.401.1.zip /data/media/0/[/B]
2922 KB/s (1102709591 bytes in 368.450s)
note that adb push will not show any kind of progress until it completes (about 5 to 10 minutes).
and finally choose "install" in CWM or TWRP and install it.
then use rumrunner; remember reading the rumrunner instruction (especially the firewall/antivirus etc).
I need help fixing my phone. I was flashing a sense 6 rom and after the aroma installer, my device rebooted into hboot and reboots if i try to reboot, power down, or go into recovery.
I need help please
one_mic_only said:
I need help fixing my phone. I was flashing a sense 6 rom and after the aroma installer, my device rebooted into hboot and reboots if i try to reboot, power down, or go into recovery.
I need help please
Click to expand...
Click to collapse
Please give us a few more information.....
which rom were you flashing ?
Which recovery do you have ?
So you can't acces into recovery ?
Boachti said:
Please give us a few more information.....
which rom were you flashing ?
Which recovery do you have ?
So you can't acces into recovery ?
Click to expand...
Click to collapse
i flashed renovate
i now have 2.7.0.3 recovery
and i'm able to get into recovery and i restored
i'm just trying to get s off and try the bad boys sense 6 rom
one_mic_only said:
i flashed renovate
i now have 2.7.0.3 recovery
and i'm able to get into recovery and i restored
i'm just trying to get s off and try the bad boys sense 6 rom
Click to expand...
Click to collapse
you should be a bit more specific (renovate and 2.7.0.3 could mean a lot of things
1- start by posting a "fastboot getvar all" (excluding IMEI, MEID, and s/n)
2- an actual link to the threads (and downloads) of the files (and versions) you mentioned... cause i don't see TWRP 2.7.0.3 in either the m7_u/ul or the m7_wls models
I'm assuming TWRP, but you know what they say about assumption...
nkk71 said:
you should be a bit more specific (renovate and 2.7.0.3 could mean a lot of things
1- start by posting a "fastboot getvar all" (excluding IMEI, MEID, and s/n)
2- an actual link to the threads (and downloads) of the files (and versions) you mentioned... cause i don't see TWRP 2.7.0.3 in either the m7_u/ul or the m7_wls models
I'm assuming TWRP, but you know what they say about assumption...
Click to expand...
Click to collapse
here's the link
http://forum.xda-developers.com/showthread.php?t=2692922
and yes we all know what they say lol
i'm just trying to s-off now, cause i can't flash any of those roms without being s-off correct?
i alway root my phone, s-off, then fall into the land of the lost when it comes to going thru this process again. at least i saved myself from flat out brick.
one_mic_only said:
here's the link
http://forum.xda-developers.com/showthread.php?t=2692922
and yes we all know what they say lol
i'm just trying to s-off now, cause i can't flash any of those roms without being s-off correct?
i alway root my phone, s-off, then fall into the land of the lost when it comes to going thru this process again. at least i saved myself from flat out brick.
Click to expand...
Click to collapse
i thought only GPE ROMs require S-Off... didnt see anything in the OP about having to be S-Off.
anyway, if you're trying to S-Off best use a ROM which is inline with your firmware (so check your fastboot getvar all), then find a ROM based on the same version (rooted with unsecured kernel) and use firewater to get s-off
at least we now know you're on Sprint... cause you've only linked Sprint stuff ... i'm assuming
yes i'm on sprint lol
and here ya go
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 1.00.20.0315
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.651.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA348S905516
(bootloader) imei: 990001465400661
(bootloader) meid: 99000146540066
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4043mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-5d8b0f7651bb88c960f701ae91477674a
getvar:all FAILED (unknown status code)
finished. total time: 0.069s
any suggestions for a rom that will work? i'm about to try badseed now.
one_mic_only said:
yes i'm on sprint lol
and here ya go
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 1.00.20.0315
(bootloader) version-main: 1.29.651.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_wls
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
finished. total time: 0.069s
any suggestions for a rom that will work? i'm about to try badseed now.
Click to expand...
Click to collapse
actually, yes
hboot 1.44
http://forum.xda-developers.com/showpost.php?p=48955645&postcount=250
ARHD 9.4 is Sprint compatible (select Sprint in the installer), it's rooted, it has an unsecured kernel, and you can even use revone to S-Off
http://firewater-soff.com/ and http://rumrunner.us/ should work also, your choice
thanks.
think i'll try rum. revone aint working.
I recently tried to revert back from CM 10 to stock on my HTC one.
Everything seemed to be going fine, I found what I believed to be the right RUU(I couldnt find it in a .exe, only .zip) .
And I successfully used revone to get s-off, remove tampered and change unlocked to locked in the bootloader.
But when changing s-off back to s-on the security warning banner showed up in the bootloader and for some reason I couldn’t get into the OS anymore, it just went straight to the bootloader. I didn’t bother thinking about it since I was going to install the RUU either way. But I get the same error every time I try to install it: FAILED (remote: 12 signature verify fail). Also I couldn’t get into recovery, it just shot be back straight into the bootloader.(Correct me if i'm wrong but did the ruu.zip fail because you have to have s-off for it to work? Would make sense.) On top of that I couldn’t just get s-off again because for some reason i can only use adb commands when the phone is in the actual OS, it doesn't seem recognize it when its in bootloader/fastboot/recovery, fastboot commands work fine tho.
I was able to unlock the bootloader again using htcdev and I can now access twrp, but I can't seem to be able to factory reset, it just says: Unable to mount /data and unable to mount internal storage. The mount option in twrp does not seem to work either, trying to check data makes nothing happen. Also instead of it just launching to the bootloader directly on startup, it now gets stuck in a bootloop until you make it go into the bootloader.
As you can see i'm in quite the pickle and absolutely any help on either getting back to a functional CM or stock would be much appreciated.
The getvar all info:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.16
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA366W903347
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 4065mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.045s
If any more info is needed just ask
victor_021 said:
I recently tried to revert back from CM 10 to stock on my HTC one.
Everything seemed to be going fine, I found what I believed to be the right RUU(I couldnt find it in a .exe, only .zip) .
And I successfully used revone to get s-off, remove tampered and change unlocked to locked in the bootloader.
But when changing s-off back to s-on the security warning banner showed up in the bootloader and for some reason I couldn’t get into the OS anymore, it just went straight to the bootloader. I didn’t bother thinking about it since I was going to install the RUU either way. But I get the same error every time I try to install it: FAILED (remote: 12 signature verify fail). Also I couldn’t get into recovery, it just shot be back straight into the bootloader.(Correct me if i'm wrong but did the ruu.zip fail because you have to have s-off for it to work? Would make sense.) On top of that I couldn’t just get s-off again because for some reason i can only use adb commands when the phone is in the actual OS, it doesn't seem recognize it when its in bootloader/fastboot/recovery, fastboot commands work fine tho.
I was able to unlock the bootloader again using htcdev and I can now access twrp, but I can't seem to be able to factory reset, it just says: Unable to mount /data and unable to mount internal storage. The mount option in twrp does not seem to work either, trying to check data makes nothing happen. Also instead of it just launching to the bootloader directly on startup, it now gets stuck in a bootloop until you make it go into the bootloader.
As you can see i'm in quite the pickle and absolutely any help on either getting back to a functional CM or stock would be much appreciated.
The getvar all info:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.16
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA366W903347
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 4065mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.045s
If any more info is needed just ask
Click to expand...
Click to collapse
Where did you get the RUU from? It should work even if S-ON as long as the version of the RUU is the same as or newer than your current version.
EDIT: Did it say it was Encrypted or Decrypted? It needs to have an Encrypted Signature or else you'll get the Remote 12 error.
victor_021 said:
I recently tried to revert back from CM 10 to stock on my HTC one.
Everything seemed to be going fine, I found what I believed to be the right RUU(I couldnt find it in a .exe, only .zip) .
And I successfully used revone to get s-off, remove tampered and change unlocked to locked in the bootloader.
But when changing s-off back to s-on the security warning banner showed up in the bootloader and for some reason I couldn’t get into the OS anymore, it just went straight to the bootloader. I didn’t bother thinking about it since I was going to install the RUU either way. But I get the same error every time I try to install it: FAILED (remote: 12 signature verify fail). Also I couldn’t get into recovery, it just shot be back straight into the bootloader.(Correct me if i'm wrong but did the ruu.zip fail because you have to have s-off for it to work? Would make sense.) On top of that I couldn’t just get s-off again because for some reason i can only use adb commands when the phone is in the actual OS, it doesn't seem recognize it when its in bootloader/fastboot/recovery, fastboot commands work fine tho.
I was able to unlock the bootloader again using htcdev and I can now access twrp, but I can't seem to be able to factory reset, it just says: Unable to mount /data and unable to mount internal storage. The mount option in twrp does not seem to work either, trying to check data makes nothing happen. Also instead of it just launching to the bootloader directly on startup, it now gets stuck in a bootloop until you make it go into the bootloader.
As you can see i'm in quite the pickle and absolutely any help on either getting back to a functional CM or stock would be much appreciated.
The getvar all info:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.16
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA366W903347
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 4065mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.045s
If any more info is needed just ask
Click to expand...
Click to collapse
Never Go S-ON !!!!
flash this with TWRP
http://www.htc1guru.com/dld/guru_reset_m7_3-62-401-1-zip/
Thanks for the replies but after a few hours of nonstop research i managed to fix the problem. I simply installed CWM because TWRP had totally crapped out on me. From there I just simply sideloaded a Viperone 4.4.2 rom and everything is working fine, don't really feel the need to return to stock anymore. Can't believe how simple that turned out to be, anyway thanks for the replies and hopefully this might help other people in the same situation.
stuck
hlo sir,I m really depressed these days bcz I can't finf ruu for my htc one as it shows
TAMPERED RELOCKED SECURITY WARNING.. my cid is VODAP021 and mied is PN071400 hboot
is 1.54 and os is 2.24.980.3... I tried to flash a guru reset with same cid no. but with slight
difference in os it was 2.24.980.2 and it showed signature verify fail......so plzzzz helpppp
meee....suggest me the perfect ruu
jaspreet4140 said:
hlo sir,I m really depressed these days bcz I can't finf ruu for my htc one as it shows
TAMPERED RELOCKED SECURITY WARNING.. my cid is VODAP021 and mied is PN071400 hboot
is 1.54 and os is 2.24.980.3... I tried to flash a guru reset with same cid no. but with slight
difference in os it was 2.24.980.2 and it showed signature verify fail......so plzzzz helpppp
meee....suggest me the perfect ruu
Click to expand...
Click to collapse
Guru reset is a rom not a ruu, so you must be bootloader unlocked to flash it via custom recovery (twrp 2.6.3.3 preferred)
stuck
@aray ,sir thnx for the quik reply....sir but I m stuck can't unlock bootloader I m s-on plz tell with which ruu I would flash my phone..send link....I would really appreciate that
jaspreet4140 said:
@aray ,sir thnx for the quik reply....sir but I m stuck can't unlock bootloader I m s-on plz tell with which ruu I would flash my phone..send link....I would really appreciate that
Click to expand...
Click to collapse
No need to use ''sir''
You can unlock bootloader, it has nothing to do with being s-on! Get you identifier token then submit it to htcdev. They will instantly send you an e-mail with your unlock_code.bin. Flash it and you'll be unlocked.
Video tutorial here
And there is no RUU for your phone so the guru reset rom is the best option.
Video tutorial to use a guru reset rom here
re
@alray,thx for showing concern n my problem...when I use command 'fastboot oem get_indentifier_token' I get msg of command error.....help
jaspreet4140 said:
@alray,thx for showing concern n my problem...when I use command 'fastboot oem get_indentifier_token' I get msg of command error.....help
Click to expand...
Click to collapse
do you have your htc drivers correctly installed on your computer and the android sdk?
When you go in windows devices manager, do you see you your phone as ''My HTC'' ?
in command prompt when you do ''fastboot devices'' does it reply your phone s/n + fastboot ?
ya I downloaded htc driveres frm xda only...but I don't hve android sdk.....
but on running fastboot devices it shows my phone serial....
stuck
@alray plzz reply me........n help mee
jaspreet4140 said:
ya I downloaded htc driveres frm xda only...but I don't hve android sdk.....
but on running fastboot devices it shows my phone serial....
Click to expand...
Click to collapse
jaspreet4140 said:
@alray plzz reply me........n help mee
Click to expand...
Click to collapse
hlo sir,I m really depressed these days bcz I can't find ruu for my htc one as it shows TAMPERED RELOCKED SECURITY WARNING.. my cid is VODAP021 and mied is PN071400 hboot is 1.54 and os is 2.24.980.3... I tried to flash a guru reset with same cid no. but with slight difference in os it was 2.24.980.2 and it showed signature verify fail......so plzzzz helpppp meee....suggest me the perfect ruus
Click to expand...
Click to collapse
could i ask you to go to your other post: http://forum.xda-developers.com/showpost.php?p=52109146&postcount=41 and remove it. (EDIT and just but "deleted" as text), let's keep it here
you can get the mini-sdk from here: http://www.androidfilehost.com/?fid=23329332407585867
extract it and put the files in a simple folder, maybe something like C:\ADB\
then you need to get bootloader unlocked using HTCdev: http://www.htcdev.com/bootloader/
I recently made my phone S-Off, used SuperCid and flashed an RUU.
Then I flashed viper rom and now want to flash either Paranoid android or Carbon but every time I do, the phone boots into the rom and then reboots or reboot from the boot splash.
I restored a backup from before the ViperRom flash and the problem still occur
Any help is greatly appreciated!
Using TWRP
parthami said:
I recently made my phone S-Off, used SuperCid and flashed an RUU.
Then I flashed viper rom and now want to flash either Paranoid android or Carbon but every time I do, the phone boots into the rom and then reboots or reboot from the boot splash.
I restored a backup from before the ViperRom flash and the problem still occur
Any help is greatly appreciated!
Using TWRP
Click to expand...
Click to collapse
Doesn't Viper require a special version of TWRP? You could try a newer version of TWRP or flash your stock firmware and do a reset in stock recovery. Then flash TWRP and a custom rom. Or run the RUU again.
majmoz said:
Doesn't Viper require a special version of TWRP? You could try a newer version of TWRP or flash your stock firmware and do a reset in stock recovery. Then flash TWRP and a custom rom. Or run the RUU again.
Click to expand...
Click to collapse
I updated TWRP, no change
I also ran the RUU again, no difference
Sidenote: The stock rom is rotated landscape after the RUU
parthami said:
I updated TWRP, no change
I also ran the RUU again, no difference
Sidenote: The stock rom is rotated landscape after the RUU
Click to expand...
Click to collapse
What RUU are you running and where did you get it?
What were the TWRP version numbers?
Could you post a fastboot getvar all except for imei and serialno?
majmoz said:
What RUU are you running and where did you get it?
What were the TWRP version numbers?
Could you post a fastboot getvar all except for imei and serialno?
Click to expand...
Click to collapse
RUU_M7_U_JB_50_HTC_EUROPE_1.29.401.2_R_Radio_4A.14.3250.13_10.33.1150.01_RELEASE_311663_SIGNED_2_4 (I just relised that thius might a Jellybean build, is that causing the issuse) from htc1guru
TWRP 2.8.0.2 and 2.7.1.1
Code:
C:\Android>fastboot getvar all
(bootloader) version 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version: PVT SHIP S-OFF
(bootloader) serialno: ******************
(bootloader) imei: ******************
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT_8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3961mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar: all FAILED (status read failed(Too many links))
finshed. total time: 0.212s
Thanks for all your help so far!
parthami said:
RUU_M7_U_JB_50_HTC_EUROPE_1.29.401.2_R_Radio_4A.14.3250.13_10.33.1150.01_RELEASE_311663_SIGNED_2_4 (I just relised that thius might a Jellybean build, is that causing the issuse) from htc1guru
TWRP 2.8.0.2 and 2.7.1.1
Code:
C:\Android>fastboot getvar all
(bootloader) version 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version: PVT SHIP S-OFF
(bootloader) serialno: ******************
(bootloader) imei: ******************
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT_8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3961mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar: all FAILED (status read failed(Too many links))
finshed. total time: 0.212s
Thanks for all your help so far!
Click to expand...
Click to collapse
Sorry, I was away for a few days. If you have not already, you might try a newer RUU you can get it from htc1guru or this site they have the OTAs to the present and a nandroid 5.11.401.10 just scroll down the page.
majmoz said:
Sorry, I was away for a few days. If you have not already, you might try a newer RUU you can get it from htc1guru or this site they have the OTAs to the present and a nandroid 5.11.401.10 just scroll down the page.
Click to expand...
Click to collapse
no worries
I've tried the x.xx401.x RUU K44 Europe and O2 but they both come up with error code 158
parthami said:
no worries
I've tried the x.xx401.x RUU K44 Europe and O2 but they both come up with error code 158
Click to expand...
Click to collapse
Try this Stock Firmware 4.19.401.9 first and then run the corresponding RUU.
majmoz said:
Try this Stock Firmware 4.19.401.9 first and then run the corresponding RUU.
Click to expand...
Click to collapse
Flashed the firmware and then Active cmdline overflow! came up so I have been trying to follow this guide but adb doesnt seem to work in recovery. Hopefully I can get this sorted out as my phone completely useless
parthami said:
Flashed the firmware and then Active cmdline overflow! came up so I have been trying to follow this guide but adb doesnt seem to work in recovery. Hopefully I can get this sorted out as my phone completely useless
Click to expand...
Click to collapse
Take a look at FAQ Q#2 for help with ADB.
majmoz said:
Take a look at FAQ Q#2 for help with ADB.
Click to expand...
Click to collapse
I somehow got it working before your post but I will still read the FAQ fully, thanks!
Currently on the RUU so hopefully will be able to flash what I need but sadly can not charge which is a problem I have with sense roms
EDIT: Back to the original question, after flashing the stock firmware and RUU, flashing PA still results in reboot after booting into the rom once I start going though the gapps getup. If I dont touch anything it doesnt reboot
parthami said:
I somehow got it working before your post but I will still read the FAQ fully, thanks!
Currently on the RUU so hopefully will be able to flash what I need but sadly can not charge which is a problem I have with sense roms
EDIT: Back to the original question, after flashing the stock firmware and RUU, flashing PA still results in reboot after booting into the rom once I start going though the gapps getup. If I dont touch anything it doesnt reboot
Click to expand...
Click to collapse
I don't use PA, but maybe it is something in the way it is compiled that is causing you the issue. The two version I looked at were both beta builds which means there maybe bugs. Sorry, I can not help you on this one. I think you may have enough post to post in the development forum so you could possibiliy post your question there.
@v7znay Could you help parthami with his bootloop issue with PA?
majmoz said:
I don't use PA, but maybe it is something in the way it is compiled that is causing you the issue. The two version I looked at were both beta builds which means there maybe bugs. Sorry, I can not help you on this one. I think you may have enough post to post in the development forum so you could possibiliy post your question there.
@v7znay Could you help parthami with his bootloop issue with PA?
Click to expand...
Click to collapse
No worries, you have been a tremendous help so far! I will try with Carbon or CM and hopefully that works
Any way I can repay you, please let me know
EDIT: The problem happens with CM so clearly not a issue with particular rom