Related
Hi.
It took my a while and I finally got my phone S-OFF and rooted. I just got a few questions
1)I want to use ICS but I don't like the laggy Sense. There seems to be at least few bugs in every custom ROM, so I'd like to stick with stock ROMs. But is there a way to "get rid of sense" or to at least mod it to be faster? Or perhaps there is another solution?
2)I read that if I use OTA updates my recovery will revert back to stock (using CWM). Is that the same case when using official RUU's ?
tripleJohn said:
Hi.
It took my a while and I finally got my phone S-OFF and rooted. I just got a few questions
1)I want to use ICS but I don't like the laggy Sense. There seems to be at least few bugs in every custom ROM, so I'd like to stick with stock ROMs. But is there a way to "get rid of sense" or to at least mod it to be faster? Or perhaps there is another solution?
2)I read that if I use OTA updates my recovery will revert back to stock (using CWM). Is that the same case when using official RUU's ?
Click to expand...
Click to collapse
Now that you have S-OFF, stay away from any official HTC OTA or RUU because they will leave your phone in an unbootable state and will be very frustrating for a noob.
There are several ICS ROMs both with and without Sense. You just need to try them and find one you like. Just remember that once the ICS kernel source for the IncS is released by HTC, some of the custom ROM issues may be solved.
tripleJohn said:
Hi.
It took my a while and I finally got my phone S-OFF and rooted. I just got a few questions
1)I want to use ICS but I don't like the laggy Sense. There seems to be at least few bugs in every custom ROM, so I'd like to stick with stock ROMs. But is there a way to "get rid of sense" or to at least mod it to be faster? Or perhaps there is another solution?
2)I read that if I use OTA updates my recovery will revert back to stock (using CWM). Is that the same case when using official RUU's ?
Click to expand...
Click to collapse
If u want ICS without sense, one of the smoothest rom is icecoldsandwich, works really well!
agree, icecoldsandwish is the best no sense rom
for sense you can use project x or cool droid
tpbklake said:
Now that you have S-OFF, stay away from any official HTC OTA or RUU because they will leave your phone in an unbootable state and will be very frustrating for a noob.
Click to expand...
Click to collapse
Hmmm.... Why is that so? I somewhere red that S-Off has got nothing to do with OTA.
I think it has to do with the OTA overwriting the bootloader,
by the way recommend IceCold too, there's only one thing that still keeps me on CM 7, on IceCold for some reason on-screen controls of several games don't work
I'm already trying out Ice Cold Sandwich, however I'still got a few questions:
Why do official RUU's will leave my phone in unbootable state
Should I use software like Rom manager or Root explorer ? I heard they have caused problems to other users.
If I make a backup with CWM, that counts as nandroid backup and you need root permissions for it (right?) . I was able to make backup of my stock ROM without root permissions and with S-ON. Is there a difference between those two?
sirpellinor said:
I think it has to do with the OTA overwriting the bootloader,
Click to expand...
Click to collapse
But I could re-lock my bootloader before running RUU. Would that make any difference?
tripleJohn said:
I'm already trying out Ice Cold Sandwich, however I'still got a few questions:
Why do official RUU's will leave my phone in unbootable state
Should I use software like Rom manager or Root explorer ? I heard they have caused problems to other users.
If I make a backup with CWM, that counts as nandroid backup and you need root permissions for it (right?) . I was able to make backup of my stock ROM without root permissions and with S-ON. Is there a difference between those two?
Click to expand...
Click to collapse
1. Beacause it overwrites stuff in the bootloader like recovery...
2. Yeah, you really should have a file explorer with root access. I use ES File Explorer
3. If you're doing a nandroid backup in recovery you just need CMW to restore it. But for that u need root permission And since you're S-OFF now, you couldn't make a backup of your S-ON stuff It's just the ROM that stays but your phone is S-OFF now no matter if you restore your backup
tripleJohn said:
I'm already trying out Ice Cold Sandwich, however I'still got a few questions:
Why do official RUU's will leave my phone in unbootable state
Should I use software like Rom manager or Root explorer ? I heard they have caused problems to other users.
If I make a backup with CWM, that counts as nandroid backup and you need root permissions for it (right?) . I was able to make backup of my stock ROM without root permissions and with S-ON. Is there a difference between those two?
But I could re-lock my bootloader before running RUU. Would that make any difference?
Click to expand...
Click to collapse
The problem with both the GB 2.3.5/Sense 3.0 RUU and the ICS 4.0.4/Sense 3.6 is that they introduced a new /lib partition that needs the latest HTC HBOOT to execute correctly.
With the Revolutionary HBOOT in place, it is designed to not allow itself to be overwritten, thus if you attempt to install either one of these RUUs, all of the pieces will get installed correctly except for the new HTC HBOOT, thus when you attempt to boot the phone, it attempts to mount the /lib partition and the Revolutionary HBOOT has no idea what that is and the ROM freezes at the point and will not boot.
As for your last question, now that you have the Revolutionary S-OFF HBOOT in place, you are no longer running the HTC HBOOT that is lockable/unlockable, so it is not really relevant to your phone anymore.
Hi,
I had my phone replace the camera because of the purple-tint problem, HTC upgraded my phone to HBoot 1.54 and android 4.2.2 without informing me . Anyway.
After receiving my phone, I unlocked my phone again by the official method, then I wanted to make a clean backup of my rom, so I tried to boot my phone to third party recovery image by "fastboot boot some_CWM.img", my phone just hung there. I was frustrated, if I flash the CWM.img to the phone, would I brick my phone? Before the upgrade, my phone could be booted in the same CWM image file, can I use third party CWM after upgrade my HBoot to 1.54?
Any idea? please
Since you have HBOOT 1.54, you cannot boot into recovery using fastboot anymore, you have to flash the recovery and then backup the ROM.
You flash the recovery by "fastboot flash recovery recovery.img"
I also recommend TWRP, its so much easier to use and if you cant find it ill attach it here if you want!
EDIT: **** This will replace your stock recovery by CWM or TWRP ****
HTC One 1.54 bootloader, flash recovery.
Hey guys, new member, and thanks for the extensive information provided on the forum!
I have a related question to what the OP posted...possibly pertinent info about the phone itself:
I have an HTC One with 1.54 bootloader, it used to be a 4.1.2 with 1.44 bootloader AT&T device, which I rooted, S-OFF, CWM etc. I then realized I couldn't take OTA updates and was stuck either on 4.1.2 or a custom ROM, so I downloaded a 4.4 stock google edition RUU and installed it. Everything is good so far, but I cannot do a full backup anymore because it has the stock recovery.
My question is, can I just flash the CWM recovery, backup the phone, and flash back the stock recovery? My goal is to get best of both worlds, get OTA updates from google as well as do a full back-up of my phone.
Please advise, and thanks in advance for your input!
PS: Since the 4.4 RUU update, my phone still says "unlocked" and "S-OFF", if that matters at all.
Krish_1 said:
Hey guys, new member, and thanks for the extensive information provided on the forum!
I have a related question to what the OP posted...possibly pertinent info about the phone itself:
I have an HTC One with 1.54 bootloader, it used to be a 4.1.2 with 1.44 bootloader AT&T device, which I rooted, S-OFF, CWM etc. I then realized I couldn't take OTA updates and was stuck either on 4.1.2 or a custom ROM, so I downloaded a 4.4 stock google edition RUU and installed it. Everything is good so far, but I cannot do a full backup anymore because it has the stock recovery.
My question is, can I just flash the CWM recovery, backup the phone, and flash back the stock recovery? My goal is to get best of both worlds, get OTA updates from google as well as do a full back-up of my phone.
Please advise, and thanks in advance for your input!
PS: Since the 4.4 RUU update, my phone still says "unlocked" and "S-OFF", if that matters at all.
Click to expand...
Click to collapse
Sure you can but the stock recovery is only needed for OTA and they don't come that often.
and your phone has to be stock with stock recovery (no apps removed).
most people just ruu back to stock for the ota... not run custom recovery just long enough to backup.
Thanks for the quick response! I think what you're saying makes sense, though I don't have a stock AT&T RUU. I'm guessing I can download it with similar firmware so I can switch as needed. Thanks again!
Krish_1 said:
Thanks for the quick response! I think what you're saying makes sense, though I don't have a stock AT&T RUU. I'm guessing I can download it with similar firmware so I can switch as needed. Thanks again!
Click to expand...
Click to collapse
here's all the ruu's you should ever need
http://www.htc1guru.com/downloads
Awesome, thanks again!
I looked around the site before posting this, didn't find anything specific. I have a Nandroid backup of the stock phone before I started messing with it. If I do a recovery of that image using CWM, is it the same as downloading and flashing one of the stock RUUs? I'm guessing not, but would like to know for sure. Is the difference that RUUs have firmware, radio etc, while a Nandroid backup is of the OS and SD card?
Krish_1 said:
Awesome, thanks again!
I looked around the site before posting this, didn't find anything specific. I have a Nandroid backup of the stock phone before I started messing with it. If I do a recovery of that image using CWM, is it the same as downloading and flashing one of the stock RUUs? I'm guessing not, but would like to know for sure. Is the difference that RUUs have firmware, radio etc, while a Nandroid backup is of the OS and SD card?
Click to expand...
Click to collapse
well for one thing when you unlock the booloader it deletes some system files when it wipes the phone.. so your stock backup is already flawed (not true stock). and like i said to take OTA you must have a complete Stock phone. the only real Stock phone comes from RUU. I hope this clears it up for you. And no your sdcard is not backed up in the Nandroid
clsA said:
well for one thing when you unlock the booloader it deletes some system files when it wipes the phone.. so your stock backup is already flawed (not true stock). and like i said to take OTA you must have a complete Stock phone. the only real Stock phone comes from RUU. I hope this clears it up for you. And no your sdcard is not backed up in the Nandroid
Click to expand...
Click to collapse
Makes perfect sense, thanks again for the super quick responses!
Hi guys, sorry in advance for digging up an old thread!
I have an AT&T HTC One, installed the Google Edition 4.4.2 with this group's help, rooted etc.
I received an OTA update from google today (4.4.3), and while I tried installing it, it crashes with a "SET_METADATA_RECURSIVE" something failed etc. I tried it with both the recovery.img that I have from the Google Edition ROM as well as the CWM recovery.
I've searched for stuff in the forum and the only thing I found is that I may need the latest version of clockworkmod, but I think I already do...I have 6.0.4.3, which is the HTC One AT&T one. Also, since I installed the Google Edition ROM, I haven't removed or uninstalled any system apps..so my phone is pretty stock as far as Google is concerned.
Can someone point me in the right direction?
Thanks!
---------- Post added at 07:10 PM ---------- Previous post was at 06:17 PM ----------
I figured it out...I had to get the recovery.img from the 4.4.2 RUU, fastboot flash the bugger into my phone (CWK didn't work), and I was able to download and install the 4.4.3 with no issues. Pissed away a few hrs trying different things, hopefully this update is worth it!!!
Krish_1 said:
Hi guys, sorry in advance for digging up an old thread!
I have an AT&T HTC One, installed the Google Edition 4.4.2 with this group's help, rooted etc.
I received an OTA update from google today (4.4.3), and while I tried installing it, it crashes with a "SET_METADATA_RECURSIVE" something failed etc. I tried it with both the recovery.img that I have from the Google Edition ROM as well as the CWM recovery.
I've searched for stuff in the forum and the only thing I found is that I may need the latest version of clockworkmod, but I think I already do...I have 6.0.4.3, which is the HTC One AT&T one. Also, since I installed the Google Edition ROM, I haven't removed or uninstalled any system apps..so my phone is pretty stock as far as Google is concerned.
Can someone point me in the right direction?
Thanks!
Click to expand...
Click to collapse
Hello everyone,
This is my first post so I hope I don't end up being a "typical noob".
I'll try give the full info but keep it concise.
Background:
1) Carrier Unlocked HTC One M7 Originally on Rogers.
M7_UL PVT SHIP S-On RH
HBoot-1.44.000
Radio - 4A.14.3250.13
Open DSP 26.120.274.0202
emmc-boot
2) The phone was working perfectly after being hard reset, and configured without a sim.
3) After it was activated by the telco, the keyboard would would no longer work. Dialpad fine... menus fine... but no keyboard would pop up when selecting text fields. Did a full factory reset, and also tried clearing the Sense Touch data cache via Settings->App.
4) After trying various possible solutions I found online, I finally decided to try start from scratch by installing stock firmware.
WARNING: i'm the second owner of the phone. For warranty I would have had to send the phone to HTC. I suspect the HTC warranty won't apply to me anyhow. I suggest that in this situation, people just get the phone fixed on warranty if they have that option
First Steps:
A1) I unlocked the bootloader via HTCDev and used adb to flash CWM Touch Recovery.
A2) Restored the "M7 CWM Nandroid Backup / CID ROGER001 / 1.29.631.17 (Rogers - Thanks to Whampahoofus)"
A3) Phone now works correctly at this stage, but is still bootloader unlocked/tampered + CWM Touch Recovery
A4) While I may eventually flash the phone to an official Developer Edition
I would like to reinstall a factory recovery.img, then use revone to get rid of the bootloader "tampered" flag and relock it. (for OTA Updates, and the usual warranty concerns)
A5) I tried flashing both the boot.img and recovery.img from "OTA_M7_UL_JB_50_Rogers_WWE_1.29.631.17_R-1.29.631.4_release_318662" to get back to stock recovery, but I got a Red triangle.
Questions:
Q1): Does anyone know of a stock recovery.img I can use with Rogers firmware ? (SEE UPDATE BELOW)
Q2): Is there some trick to getting the OTA recovery/boot images I tried....working ? Is there some cache reset of somthing that needs to be done after flashing the stock recovery/boot imgs ? (SEE UPDATE BELOW)
Thanks in advance !
same issue
I too am looking for a rogers ruu or even the M7 CWM Nandroid Backup / CID ROGER001 / 1.29.631.17 (Rogers - Thanks to Whampahoofus) since bugsys page is down.
bump
LRail said:
Hello everyone,
This is my first post so I hope I don't end up being a "typical noob".
I'll try give the full info but keep it concise.
Background:
1) Carrier Unlocked HTC One M7 Originally on Rogers.
M7_UL PVT SHIP S-On RH
HBoot-1.44.000
Radio - 4A.14.3250.13
Open DSP 26.120.274.0202
emmc-boot
2) The phone was working perfectly after being hard reset, and configured without a sim.
3) After it was activated by the telco, the keyboard would would no longer work. Dialpad fine... menus fine... but no keyboard would pop up when selecting text fields. Did a full factory reset, and also tried clearing the Sense Touch data cache via Settings->App.
4) After trying various possible solutions I found online, I finally decided to try start from scratch by installing stock firmware.
So far:
A1) I unlocked the bootloader via HTCDev and used adb to flash CWM Touch Recovery.
A2) Restored the "M7 CWM Nandroid Backup / CID ROGER001 / 1.29.631.17 (Rogers - Thanks to Whampahoofus)"
A3) Phone now works correctly at this stage, but is still bootloader unlocked/tampered + CWM Touch Recovery
A4) While I may eventually flash the phone to an official Developer Edition
I would like to reinstall a factory recovery.img, then use revone to get rid of the bootloader "tampered" flag and relock it. (for OTA Updates, and the usual warranty concerns)
A5) I tried flashing both the boot.img and recovery.img from "OTA_M7_UL_JB_50_Rogers_WWE_1.29.631.17_R-1.29.631.4_release_318662" to get back to stock recovery, but I got a Red triangle.
Questions:
Q1): Does anyone know of a stock recovery.img I can use with Rogers firmware ?
Q2): Is there some trick to getting the OTA recovery/boot images I tried....working ? Is there some cache reset of somthing that needs to be done after flashing the stock recovery/boot imgs ?
Q3) If I eventually decide to install the Developer Edition firmware.. will the phone be effectively be a Dev phone ? (OTA updates... factory recovery/locked bootloader... no ID issues in the future..)
Thanks in advance !
P.S. For pure curiousity.... Am I correct in believing that revone can't clear the "tamper" flag and lock the bootloader with the custom recovery ?
Click to expand...
Click to collapse
double post
omgkush said:
I too am looking for a rogers ruu or even the M7 CWM Nandroid Backup / CID ROGER001 / 1.29.631.17 (Rogers - Thanks to Whampahoofus) since bugsys page is down.
bump
Click to expand...
Click to collapse
A lot of the RUUs and nandroid files were apparently "saved" to "Crushalot's" site: htc1guru.com
you can also get the file links in this thread: http://forum.xda-developers.com/showthread.php?t=2428276
I used that nandroid backup. I don't think a Rogers RUU exists (yet).
UPDATE ON MY PROGRESS:
1) I had success with using revone to get my M7 S-Off and removed the tampered flag in the bootloader.
I suspected that SuperSU wasn't working right becaue i hadn't been getting a root permission popup window on the phone.
On I reinstalled SuperSU, I got the root rights popup window when running revone, and it then worked.
2) I have realized that the firmware.zip, which is contained in the OTA update, contains the factory recovery and boot image I needed.
(I kept thinking that it was an incremental update and not a complete image or something, due to it's size.)
Therefore, instead of flashing the images individually, I used the firmware.zip from the OTA update to do a complete firmware update.
3) The Red triangle I was getting was, normal. I couldn't find clear info, so I assumed it was a bad sign because the only time i had seen the factory recovery was when it was upating with a red circle/arrow. So.. I thought the red circle/arrow was the icon you wanted to see.
Eventually I found a thread for a different HTC Phone, that also works for the M7
Result: You can use the volume up + power buttons to enter the recovery once the red triangle appears.
4) After installing the firmware (extracted from the OTA update), I used revone to set the phone back to S-ON, then locked it.
5) The OTA update then automatically installed, as a stock phone would.
6) After the OTA update, for some reason the tampered flag is back. I'll be using revone today to fix that.
UPDATE 2
:
6) After the OTA update, for some reason the tampered flag was back. I unlocked the phone, used revone to to get S-OFF, then used revone to reset the tamper flag and relock the bootloader, and then "fastboot oem writesecureflag 3" to set S-ON.
After 2 reboots the Tampered flag was back !
I'm suspecting that for the tampered flag to stay off I need to keep it S-OFF, which defeats the whole idea of trying to return it to stock.
Any ideas ?
Anyone working for Rogers want to leak an RUU ? hehe
Did you use CWM to flash the firmware.zip in step 2? I'm trying to follow your steps to get back to stock to obtain my stock rogers update but i'm getting lost as to what you're using to flash, recovery or fastboot.
LRail said:
A lot of the RUUs and nandroid files were apparently "saved" to "Crushalot's" site: htc1guru.com
you can also get the file links in this thread: http://forum.xda-developers.com/showthread.php?t=2428276
I used that nandroid backup. I don't think a Rogers RUU exists (yet).
UPDATE ON MY PROGRESS:
1) I had success with using revone to get my M7 S-Off and removed the tampered flag in the bootloader.
I suspected that SuperSU wasn't working right becaue i hadn't been getting a root permission popup window on the phone.
On I reinstalled SuperSU, I got the root rights popup window when running revone, and it then worked.
2) I have realized that the firmware.zip, which is contained in the OTA update, contains the factory recovery and boot image I needed.
(I kept thinking that it was an incremental update and not a complete image or something, due to it's size.)
Therefore, instead of flashing the images individually, I used the firmware.zip from the OTA update to do a complete firmware update.
3) The Red triangle I was getting was, normal. I couldn't find clear info, so I assumed it was a bad sign because the only time i had seen the factory recovery was when it was upating with a red circle/arrow. So.. I thought the red circle/arrow was the icon you wanted to see.
Eventually I found a thread for a different HTC Phone, that also works for the M7
Result: You can use the volume up + power buttons to enter the recovery once the red triangle appears.
4) After installing the firmware (extracted from the OTA update), I used revone to set the phone back to S-ON, then locked it.
5) The OTA update then automatically installed, as a stock phone would.
6) After the OTA update, for some reason the tampered flag is back. I'll be using revone today to fix that.
UPDATE 2
:
6) After the OTA update, for some reason the tampered flag was back. I unlocked the phone, used revone to to get S-OFF, then used revone to reset the tamper flag and relock the bootloader, and then "fastboot oem writesecureflag 3" to set S-ON.
After 2 reboots the Tampered flag was back !
I'm suspecting that for the tampered flag to stay off I need to keep it S-OFF, which defeats the whole idea of trying to return it to stock.
Any ideas ?
Anyone working for Rogers want to leak an RUU ? hehe
Click to expand...
Click to collapse
Tampered will come back the second you flash a recovery. Best to stay S-OFF
I've been in a similar situation where I had to send my phone in for repair and couldn't get the tamper flag to stay off.
I found out it was because I was trying to remove the flag and lock the bootloader and S-On on 1.29.631.17
What I had to do was restore using CWM back to 631.4 then flash stock recovery then remove flag, lock bootloader, then S-On.
The tamper flag should stay off you can try rebooting a couple of times then boot into bootloader to check.
Then I ran the OTA updates and i'm on 631.17 at the moment and my tamper flag is still off.
Hope this helps.
PS. I believe the latest JB4.3 OTA update upgrades the hboot to 1.55 so revone would not work on it. Not planning to try it myself but if anyone can verify this would be great
ysl00 said:
I've been in a similar situation where I had to send my phone in for repair and couldn't get the tamper flag to stay off.
I found out it was because I was trying to remove the flag and lock the bootloader and S-On on 1.29.631.17
What I had to do was restore using CWM back to 631.4 then flash stock recovery then remove flag, lock bootloader, then S-On.
The tamper flag should stay off you can try rebooting a couple of times then boot into bootloader to check.
Then I ran the OTA updates and i'm on 631.17 at the moment and my tamper flag is still off.
Hope this helps.
PS. I believe the latest JB4.3 OTA update upgrades the hboot to 1.55 so revone would not work on it. Not planning to try it myself but if anyone can verify this would be great
Click to expand...
Click to collapse
Thanks for the heads up. If I get a bunch of free time I may just test that after doing a new full backup.
Not sure about the Rogers 4.3 OTA.
I'm running currently the phone with Developer Edition ROM+CID and can confirm that it's 4.3 OTA updates hboot to 1.55.
After the update my phone is still s-off.
I have previously rolled back to an older hboot via a firmware flash.
Since the phone is still S-OFF, I assume I can do that again if needed.
EddyOS said:
Tampered will come back the second you flash a recovery. Best to stay S-OFF
Click to expand...
Click to collapse
Thanks For the reply Eddy.
Recovery flashing sets the tampered flag even if it's a factory recovery from an OTA being flashed ?
I agree on the S-OFF normally.
This was a test to see if I could get it back to full stock for warranty if needed, and S-OFF would not be acceptable in that case.
please help!
PLEASE! I have been trying to get Rogers stock Canada back on my HTC since the day after release lol..
I have this nandroid backup but can't figure out how to flash it... I also can't relock to try and flash a legit version
So pleaseeee how do I install this!!! I am using cwm I tried making a folder called backups in clockworkmod dir but it doesn't pickup the nandroid backup... Help plz!!!!
So what do I do with the M7 CWM Nandroid Backup CID ROGER001 1.29.631.17 2013-06-03.zip
I can't flash it and it won't recognise it as a backup, how do I even install it?
Nobody has mentioned how to use this zip, it isn't a tar file or flashable so what do I do with it?
millarrjm said:
PLEASE! I have been trying to get Rogers stock Canada back on my HTC since the day after release lol..
I have this nandroid backup but can't figure out how to flash it... I also can't relock to try and flash a legit version
So pleaseeee how do I install this!!! I am using cwm I tried making a folder called backups in clockworkmod dir but it doesn't pickup the nandroid backup... Help plz!!!!
Click to expand...
Click to collapse
Esposition said:
So what do I do with the M7 CWM Nandroid Backup CID ROGER001 1.29.631.17 2013-06-03.zip
I can't flash it and it won't recognise it as a backup, how do I even install it?
Nobody has mentioned how to use this zip, it isn't a tar file or flashable so what do I do with it?
Click to expand...
Click to collapse
Simply doing a web search for info would have given you the answers on many many webpages and some youtube videos.
http://bit.ly/1a6d88A
http://bit.ly/1a6ewZ5
Quick answer:
1) Nandroid backups are created and used by the custom recovery "clockworkmod"
2)You need to install a CWM custom recovery (i like the touch version), then unzip the nandroid backup file to the /clockworkmod/backup/ folder. It will create a new folder there. I used the program "Android File Transfer" to copy the files from my laptop to the phone.
3) Once the backup file is on your phone, to restore the backup, you simply boot into recovery and restore the backup as explained in those web pages or youtube videos.
If you have specific things you have tried.... folder names... etc. then ask a question in detail.
You will then have a much higher chance of getting a correct answer (or even an answer at all)
Hope that helps a bit...
Cheers
PS:
millarrjm
FWIW: Simply asking general questions with "pleaseee" and a bunch of exclamation points is a quick way to be ignored (especially in this forum meant for people with some technical skill) See this video (which you should have seen on signup to the forum) for info: http://www.youtube.com/watch?v=JmvCpR45LKA
re.
LRail said:
Simply doing a web search for info would have given you the answers on many many webpages and some youtube videos.
http://bit.ly/1a6d88A
http://bit.ly/1a6ewZ5
Quick answer:
1) Nandroid backups are created and used by the custom recovery "clockworkmod"
2)You need to install a CWM custom recovery (i like the touch version), then unzip the nandroid backup file to the /clockworkmod/backup/ folder. It will create a new folder there. I used the program "Android File Transfer" to copy the files from my laptop to the phone.
3) Once the backup file is on your phone, to restore the backup, you simply boot into recovery and restore the backup as explained in those web pages or youtube videos.
If you have specific things you have tried.... folder names... etc. then ask a question in detail.
You will then have a much higher chance of getting a correct answer (or even an answer at all)
Hope that helps a bit...
Cheers
PS:
millarrjm
FWIW: Simply asking general questions with "pleaseee" and a bunch of exclamation points is a quick way to be ignored (especially in this forum meant for people with some technical skill) See this video (which you should have seen on signup to the forum) for info: http://www.youtube.com/watch?v=JmvCpR45LKA
Click to expand...
Click to collapse
I tried that. CWM version 6.+ doesn't save to the backup folder anymore. And won't read a restore I put in it either... Ie. The rogers off the bugzylawson site.
bklam said:
Did you use CWM to flash the firmware.zip in step 2? I'm trying to follow your steps to get back to stock to obtain my stock rogers update but i'm getting lost as to what you're using to flash, recovery or fastboot.
Click to expand...
Click to collapse
Hello bklam,
Sorry, I missed your question.
No. I used CWM only to restore the "Whampahoofus"' nandroid backup.
That backup is "almost" 100% stock. Unfortunately it contains a custom recovery and won't (in my experience) work for normal OTA updates.
To solve this I decided to extract the factory firmware from one of the old Rogers OTA ("unrar" will extact the files from the OTA), and flash that.
To flash it I used the quick instructions in the 1st post of this thread-->http://forum.xda-developers.com/showthread.php?t=2182823
(I believe there were more details instructions on firmware.zip flashing in another thread but I can't find it at the moment)
Note to other readers: There can be confusion about the word "firmware". Some people use it describe the Rom.
In this case, I'm referring to the hboot, boot and recovery images in a single special file called firmware.zip. I believe in some cases it can also include the radio software too.
If I ever get a chance to get this 100% tested and figured out, I'll post a step by step method.
At this point it's just a overview of what I tried, and looking for other members advice.
Unfortunately, as you can see from my posts, it didn't work 100% for me. It gave me the stock Rogers HTC One Rom/software with OTA updates, but the bootloader still had the tampered flag.
Check out ysl00's post above. He/She evidently had it working 100% without the tamper flag.
Not sure if Rogers has a 4.3 OTA yet, but that might fix the flag since it includes a firmware update along with the OS update.
Post back with your results !
Did you see my above reply lrail? .. just saw u post after thought you might have missed ot!! Thanks so much fpr the help and replies. You are the man!
figured it out.
I thoight the explorer I was using showed all files on phone. TO FIX this issue download root explorer and you can see the other directories... Goto data>media>clockworkmod>backups .. it isnt in the sd dir on your phone.
millarrjm said:
Did you see my above reply lrail? .. just saw u post after thought you might have missed ot!! Thanks so much fpr the help and replies. You are the man!
Click to expand...
Click to collapse
Sorry about that. No I didn't see it until just now. I guess thats the problem with having 20 browser tabs open at once. hehe
millarrjm said:
I thoight the explorer I was using showed all files on phone. TO FIX this issue download root explorer and you can see the other directories... Goto data>media>clockworkmod>backups .. it isnt in the sd dir on your phone.
Click to expand...
Click to collapse
Good to hear. I read your post. I thought..."Is he using a root file manager ?" then read your next post….
I was also going to suggest a guaranteed way to determine where the CWM backups are being stored on a phone.
This way it doesn't matter which version of CWM, which phone or if the back directory exists yet.
Simply create a test backup and see where it goes. Then copy the Nandroid backup that you want to restore, there.
I should mention that I'm currently running my phone as a Developer Edition (Brightstar) 4.3 with OTAs, S-OFF, and unlocked.
It's works perfectly. Only the Carrier ID (CID) needed to be changed. The MID is the same.
I assume that a brightstar RUU will work on it now, even if the phone was locked and S-ON.
I have a few more things I want to tweak on it, then I'll likely make a backup and try restore it to stock rogers again so that I can create a clear how-to.
What's interesting, is that the Developer Edition OS seems to be the same as the Rogers Edition OS (without the rogers apps which can be uninstalled).
The only reason I think it might be a better choice is that the Dev Edition should get OTA updates earlier than the Rogers Edition.
I tried the custom Viper Rom 2.6.x but couldn't get an LTE connection. I suspect that was due to APN settings, but I didn't confirm that.
Anyone got the Viper Rom fully working on a Roger HTC M7 ?
Alright so I've successfully re-installed that nandroid backup and enabled s-off, re-locked, and removed the tampered notification.
When I try to do the OTA update it just hangs at the bug fix1. It default opens and tries to install it through cwm recovery, I've never done any OTA updates before so I assume this is normal?
How can I fix it hanging at bug fix1?
Esposition said:
Alright so I've successfully re-installed that nandroid backup and enabled s-off, re-locked, and removed the tampered notification.
When I try to do the OTA update it just hangs at the bug fix1. It default opens and tries to install it through cwm recovery, I've never done any OTA updates before so I assume this is normal?
How can I fix it hanging at bug fix1?
Click to expand...
Click to collapse
The OTAs don't work with custom recovery. You need the factory recovery
Hello -- I cannot do the T-Mobile (USA) Sense 6 for M7 update OTA. I believe the problem was the custom recovery (TW) which I had, so I flashed a variety of stock recoveries (4.20.707.7, 4.19.401.11, 4.06.1540.2). My telephone is software version: 4.19.531.10 which I cannot find a stock recovery for. The update downloads, reboots, then the progress bar goes about half-way before a red-triangle appears. Not sure what else I need to do to the phone. I only have OTA ROMs on the phone, S-OFF and the device is rooted. Any one with any experience with this and how did you resolve? Many thanks in advance!
LAChris67 said:
Hello -- I cannot do the T-Mobile (USA) Sense 6 for M7 update OTA. I believe the problem was the custom recovery (TW) which I had, so I flashed a variety of stock recoveries (4.20.707.7, 4.19.401.11, 4.06.1540.2). My telephone is software version: 4.19.531.10 which I cannot find a stock recovery for. The update downloads, reboots, then the progress bar goes about half-way before a red-triangle appears. Not sure what else I need to do to the phone. I only have OTA ROMs on the phone, S-OFF and the device is rooted. Any one with any experience with this and how did you resolve? Many thanks in advance!
Click to expand...
Click to collapse
The ota update might fails because of bad recovery installed or because the md5 checksum fails because of some missing or modified /system files or missing preloaded apps like flashlight, calculator etc etc that get wiped during bootloader unlock. Since your phone is s-off, you could run the 3.24.531.3 ruu.zip (don't s-on and don't relock bootloader) and apply each ota updates from 3.24.531.3 to 5.xx.531.x,
Ok, I have one really nooby question. Are T-Mobile USA and T-Mobile Germany branded phones the same? Because my phone is T-Mobile Germany, and I've seen that for T-Mobile branded phones Sense 6 update is out, so I'm wondering if that's for all phones or just USA.
Thank you
It's for T-Mobile USA for now. Europe roll out would soon occur.
Sent from my HTC One using XDA Premium 4 mobile app
LAChris67 said:
Hello -- I cannot do the T-Mobile (USA) Sense 6 for M7 update OTA. I believe the problem was the custom recovery (TW) which I had, so I flashed a variety of stock recoveries (4.20.707.7, 4.19.401.11, 4.06.1540.2). My telephone is software version: 4.19.531.10 which I cannot find a stock recovery for. The update downloads, reboots, then the progress bar goes about half-way before a red-triangle appears. Not sure what else I need to do to the phone. I only have OTA ROMs on the phone, S-OFF and the device is rooted. Any one with any experience with this and how did you resolve? Many thanks in advance!
Click to expand...
Click to collapse
T-Mobile makes the OTA updates not work with ANY modification (other than S-OFF), so even if you relock the bootloader and install the stock recovery, the OTA update will fail. I've even tried to unroot, but it still fails. Only way to update is to install the RUU, either the exe or the zip. I just installed the last ruu.zip that I could find (3.24.531.3) then let it do the OTA update to 4.19.531.10, reboot, then do the OTA update to 5.14.531.1. A pain in the ass, but after getting everything restored and set up, it works and looks great.
---------- Post added at 03:52 PM ---------- Previous post was at 03:51 PM ----------
hrvoje334 said:
Ok, I have one really nooby question. Are T-Mobile USA and T-Mobile Germany branded phones the same? Because my phone is T-Mobile Germany, and I've seen that for T-Mobile branded phones Sense 6 update is out, so I'm wondering if that's for all phones or just USA.
Thank you
Click to expand...
Click to collapse
Just the USA.
So I'm still stucked with 4.3. Yes, they also removed 4.4 and Sense 5.5 update.
alray said:
The ota update might fails because of bad recovery installed or because the md5 checksum fails because of some missing or modified /system files or missing preloaded apps like flashlight, calculator etc etc that get wiped during bootloader unlock. Since your phone is s-off, you could run the 3.24.531.3 ruu.zip (don't s-on and don't relock bootloader) and apply each ota updates from 3.24.531.3 to 5.xx.531.x,
Click to expand...
Click to collapse
Thanks for the help. This took half a day to resolve. I used Guru Reset to get things going. I had to go from RUU_M7_UL_JB_50_TMOUS_1.27.531.11_Radio_4A.17.3250.20_10.40.1150.04_release_324846_signed_2 and work my way up to v3 (via RUU) and then started to get the OTA v4 and v5. I could not immediately go to installing the v3 (tried a couple) RUUs. Also, I think part of my own personal problem was downloading the ZIP or the EXE for the v3 RUU was becoming corrupt each time (different file sizes, etc). I know my network is solid, but this was a real problem and I could never get a decent download of an RUU for htc1guru (tried different browsers, etc too).
Thanks for the help! I'm glad I got the help and the new upgrade --- seems very nice. And, thanks too to Titanium Backup -- it quickly got a lot of my user data back in place being I had to start from scratch.
LAChris67 said:
Thanks for the help. This took half a day to resolve. I used Guru Reset to get things going. I had to go from RUU_M7_UL_JB_50_TMOUS_1.27.531.11_Radio_4A.17.3250.20_10.40.1150.04_release_324846_signed_2 and work my way up to v3 (via RUU) and then started to get the OTA v4 and v5. I could not immediately go to installing the v3 (tried a couple) RUUs. Also, I think part of my own personal problem was downloading the ZIP or the EXE for the v3 RUU was becoming corrupt each time (different file sizes, etc). I know my network is solid, but this was a real problem and I could never get a decent download of an RUU for htc1guru (tried different browsers, etc too).
Thanks for the help! I'm glad I got the help and the new upgrade --- seems very nice. And, thanks too to Titanium Backup -- it quickly got a lot of my user data back in place being I had to start from scratch.
Click to expand...
Click to collapse
Were you trying to download the RUU using the phone? I have found in the past that can corrupt the files, not sure why. I located the RUU zip for the 3.14.531.3 release in a post here on XDA (a collection of RUUs from various sources). I prefer using the zip instead of the exe (the zip is less sensitive, the exe can check too many things, making it fail more often). Once the 3.14 RUU was applied, I could then do the OTA for the 4.19 and the 5.14 releases easily. Then I re-unlocked the bootloader, installed TWRP and then rooted it.
Fuzi0719 said:
Were you trying to download the RUU using the phone? I have found in the past that can corrupt the files, not sure why. I located the RUU zip for the 3.14.531.3 release in a post here on XDA (a collection of RUUs from various sources). I prefer using the zip instead of the exe (the zip is less sensitive, the exe can check too many things, making it fail more often). Once the 3.14 RUU was applied, I could then do the OTA for the 4.19 and the 5.14 releases easily. Then I re-unlocked the bootloader, installed TWRP and then rooted it.
Click to expand...
Click to collapse
Thanks Fuzi -- yeah, I was downloading on the PC. I tried it numerous times. I agree with you and tried going with the ZIP. All times, the file was coming up in different sizes and could not extract, but I finally got it to work. Once I got the download going for the first one, I basically followed what you said here and it worked. Thanks much again.
Well I've finally rooted my HTC One M7 after months of saying I'll do it soon, I've also flashed the latest CWM recovery on there but now my question is what do I do now? I've downloaded some apps that need root permissions but nothing great. What I want is an OS that uses minimal RAM and battery. I've seen LiquidOS but that runs Android KitKat, are there any that run on Android Lollipop?
Thanks
AJHylton said:
Well I've finally rooted my HTC One M7 after months of saying I'll do it soon, I've also flashed the latest CWM recovery on there but now my question is what do I do now? I've downloaded some apps that need root permissions but nothing great.
Click to expand...
Click to collapse
Normally you only root a phone if you need to use something that requires root privileges. Its like saying: I finally managed to open that locked door to access this room where there is nothing inside that I really need... now what?
What I want is an OS that uses minimal RAM and battery. I've seen LiquidOS but that runs Android KitKat, are there any that run on Android Lollipop?
Click to expand...
Click to collapse
If you want to flash a custom rom, you don't need to root, only need to unlock the bootlaoder and flash a custom recovery (like you already did in the process of rooting). Most custom roms are pre-rooted anyway. There a lot of lollipop roms out there, check in the development section of this forum (Sense 6/7 + Lollipop or GPE lollipop). What will be the best rom for you? Its hard to tell, test a few one yourself, its the best way to find out. If you want something stripped down then probably a GPE rom will fit your needs otherwise if you prefer to have a more "complete" experience I would say go with Sense (6 or 7) rom.
alray said:
Normally you only root a phone if you need to use something that requires root privileges. Its like saying: I finally managed to open that locked door to access this room where there is nothing inside that I really need... now what?
If you want to flash a custom rom, you don't need to root, only need to unlock the bootlaoder and flash a custom recovery (like you already did in the process of rooting). Most custom roms are pre-rooted anyway. There a lot of lollipop roms out there, check in the development section of this forum (Sense 6/7 + Lollipop or GPE lollipop). What will be the best rom for you? Its hard to tell, test a few one yourself, its the best way to find out. If you want something stripped down then probably a GPE rom will fit your needs otherwise if you prefer to have a more "complete" experience I would say go with Sense (6 or 7) rom.
Click to expand...
Click to collapse
I'd like to add - change recovery to TWRP as it's recomended for most ROMs out there
Thank you, I think I'm going to go for ViperOne by Team Venom (http://forum.xda-developers.com/showthread.php?t=2334294)
This is the first time I'll be doing this so any tips or anything you'd advise me on doing?
Thank you
AJHylton said:
Thank you, I think I'm going to go for ViperOne by Team Venom (http://forum.xda-developers.com/showthread.php?t=2334294)
This is the first time I'll be doing this so any tips or anything you'd advise me on doing?
Thank you
Click to expand...
Click to collapse
yep,
Do a Nandroid backup of your current setup before flashing anything so if something goes wrong, you can simply restore that backup and use your phone. Better to save the backup your computer so if its wiped from the phone accidentally, you still have a copy.
read the OP of the ROM you want to flash twice before proceeding
Newer Sense roms (lollipop) requires a recent firmware on your phone to work properly (a 7.xx.xxx.x version). Confirm that before flashing the rom using "fastboot getvar all". The version-main number is your firmware version.
Ask questions if you are unsure about something, better than bricking your phone
You might also want to check if there is a RUU to return your phone back to stock in case you need to in the future. (your version-main will tell you the RUU version you'll need)
alray said:
yep,
Do a Nandroid backup of your current setup before flashing anything so if something goes wrong, you can simply restore that backup and use your phone. Better to save the backup your computer so if its wiped from the phone accidentally, you still have a copy.
read the OP of the ROM you want to flash twice before proceeding
Newer Sense roms (lollipop) requires a recent firmware on your phone to work properly (a 7.xx.xxx.x version). Confirm that before flashing the rom using "fastboot getvar all". The version-main number is your firmware version.
Ask questions if you are unsure about something, better than bricking your phone
You might also want to check if there is a RUU to return your phone back to stock in case you need to in the future. (your version-main will tell you the RUU version you'll need)
Click to expand...
Click to collapse
Thank you very much I think I'm ready to do it I just need to flash TWRP recovery on as I have CWM, the only 2 questions I have are;
Do I need to do anything with the bootloader, its currently unlocked but I've read on other forums some of them require the bootloader to be locked but S-Off or something? There's nothing about this in the Viper install instructions I'm just wondering if it's relevant?
Also an RUU, is that basically a recovery file with an OS? If so would I still need to look into this if I've already done a Nandroid backup?
Thank you for all your help.
AJHylton said:
Thank you very much I think I'm ready to do it I just need to flash TWRP recovery on as I have CWM, the only 2 questions I have are;
Do I need to do anything with the bootloader, its currently unlocked but I've read on other forums some of them require the bootloader to be locked but S-Off or something? There's nothing about this in the Viper install instructions I'm just wondering if it's relevant?
Also an RUU, is that basically a recovery file with an OS? If so would I still need to look into this if I've already done a Nandroid backup?
Thank you for all your help.
Click to expand...
Click to collapse
You don't need S-OFF to flash a custom rom, only an unlocked bootloader with a custom recovery.
A RUU is a factory image. It can reflash the software and firmware back to stock if needed. Its useful to know if there is one for your phone just in case you can't restore your phone using your backup for whatever reason. Tell me what your version-main is and I'll tell you if there is a RUU somewhere.
alray said:
You don't need S-OFF to flash a custom rom, only an unlocked bootloader with a custom recovery.
A RUU is a factory image. It can reflash the software and firmware back to stock if needed. Its useful to know if there is one for your phone just in case you can't restore your phone using your backup for whatever reason. Tell me what your version-main is and I'll tell you if there is a RUU somewhere.
Click to expand...
Click to collapse
Apologies this is a really noob question but how do I find that out because I've been looking at it says about using fastboot in a command window but all I get is "Waiting for device"
edit: apologies I just realised I had to actually be in fastboot mode *duhh* my version main is - version-main: 7.19.401.30
Thank you
AJHylton said:
Apologies this is a really noob question but how do I find that out because I've been looking at it says about using fastboot in a command window but all I get is "Waiting for device"
edit: apologies I just realised I had to actually be in fastboot mode *duhh* my version main is - version-main: 7.19.401.30
Thank you
Click to expand...
Click to collapse
There is no RUU for 7.19.401.30 but there is one for 7.19.401.22 which can be used on your phone if needed in the future. :good: