Related
hi.thouh i am quite experienced user here.i have read everything possible.
now how i got this.here is the story.
i had sgs i 9000 version
android 2.3.3
jvk version
then i just rooted it using odin.fine.
use speedmod kernel for gingerbrid works firne.
then when i tried to go to that rooted stock kernel made by chainfire it rebbot then
here is story..
samsung boot scree looping again again.
i can enter in recovery mode and download mode,
tried nandroid restore but same happen.
plz help what to do to make it alive.
i know its not bricked bit i didnt worked either?//
Get into download mode and re-flash a stock 2.3.3 or a 2.3.4 rom with Odin and it should help fix the boot looping.
any stock firmware .i just downloaded this from forst link.
http://forum.xda-developers.com/showthread.php?t=1011901
will it work?
NO ONE??/my * is burning.i got very sow internet,
Yes any of those in that thread, Froyo or Gingerbread should get you sorted out.
i mean first one 2.3.4 jvq veersion in the given link bddy.is it okay?
should i tick re partion in odin or not with this 2.3.4 jvq version?
JVQ is fine.
If it's a 3 part firmware (separate phone,pda, csc), then 515 pit is required with repartition ticked.
hey thefirmware i download is just .exe file.one file what to do
Uploaded it for you.
Just unzip it then add it to Odin.
Double click it as it has to extract, which then will give you 3 files.
holdz said:
Uploaded it for you.
Just unzip it then add it to Odin.
Double click it as it has to extract, which then will give you 3 files.
Click to expand...
Click to collapse
Thanx a lot got my phone alive back
saurabh88 said:
Thanx a lot got my phone alive back
Click to expand...
Click to collapse
Awesome, glad I could help
I was trying to install ICS to my galaxy note, it wasn't rooted and I was running GB 2.3.6
Now I can access *Power+home+Volume down*
Any ideas?
Thanks in advance.
ossamatarek said:
I was trying to install ICS to my galaxy note, it wasn't rooted and I was running GB 2.3.6
Now I can access *Power+home+Volume down*
Any ideas?
Thanks in advance.
Click to expand...
Click to collapse
You CAN or CANT access download mode ? If you can, simply flash a stock ROM via ODIN.
Akiainavas said:
You CAN or CANT access download mode ? If you can, simply flash a stock ROM via ODIN.
Click to expand...
Click to collapse
Yes I can, I tried to downgrade to GB but it failed as well :/
I don't really clearly understood your issue.
But if you want to flash a Stock ICS Rom, start ODIN PC, start your SGNote in download mode (button volume down + home + power), then connect your SGNote to your PC and flash via ODIN PC.
If you don't know exactly how to use ODIN PC, check tutos on the forum.
ossamatarek said:
Yes I can, I tried to downgrade to GB but it failed as well :/
Click to expand...
Click to collapse
When you say "it failed" you are going to have to be more specific. Please give us an error message. Did you get a NAND write start and factoryfs.img and it just freeze after that in Odin?
andreww88 said:
When you say "it failed" you are going to have to be more specific. Please give us an error message. Did you get a NAND write start and factoryfs.img and it just freeze after that in Odin?
Click to expand...
Click to collapse
Sorry I wanted to upload a screen shot for it but it won't let me.
http : // imageshack.us/f/339/43186614. png/ *Remove spaces*
ossamatarek said:
Sorry I wanted to upload a screen shot for it but it won't let me.
http : // imageshack.us/f/339/43186614. png/ *Remove spaces*
Click to expand...
Click to collapse
I'm at work right now and I can't view imageshack because it's blocked on this computer.
andreww88 said:
I'm at work right now and I can't view imageshack because it's blocked on this computer.
Click to expand...
Click to collapse
Thanks for trying to help
Reinstall your ADB/USB drivers, make sure you're using USB2.0 port - for me USB3.0 always results in failed flash, ultimately switch USB ports.
i have a problem with odin too..
i realy like to install this rom:http://forum.xda-developers.com/showthread.php?t=1609252
i have flashed to stock, have odin. but this rom has the following files:
Folder:
Data
meta-inf
Sdcard
System
Files:
Flash_image
modem
ZImage
how can i set this up in Odin so that i can flash this rom?
i've used DR. Ketan's guide to unroot..
who can help me?
Richard.p.struike said:
i have a problem with odin too..
i realy like to install this rom:http://forum.xda-developers.com/showthread.php?t=1609252
i have flashed to stock, have odin. but this rom has the following files:
Folder:
Data
meta-inf
Sdcard
System
Files:
Flash_image
modem
ZImage
how can i set this up in Odin so that i can flash this rom?
i've used DR. Ketan's guide to unroot..
who can help me?
Click to expand...
Click to collapse
The file you download from dr. Ketan is a .rar file, unzip it once and you get a .tar file. Flash that file with Odin in pda section. So don`t unzip the .tar file again.
andreww88 said:
When you say "it failed" you are going to have to be more specific. Please give us an error message. Did you get a NAND write start and factoryfs.img and it just freeze after that in Odin?
Click to expand...
Click to collapse
The problem was the ROM itself
I flashed a new 4.0.3 and it worked perfectly
Thanks a lot.
Richard.p.struike said:
i have a problem with odin too..
i realy like to install this rom:http://forum.xda-developers.com/showthread.php?t=1609252
i have flashed to stock, have odin. but this rom has the following files:
Folder:
Data
meta-inf
Sdcard
System
Files:
Flash_image
modem
ZImage
how can i set this up in Odin so that i can flash this rom?
i've used DR. Ketan's guide to unroot..
who can help me?
Click to expand...
Click to collapse
To start with - you need root to flash this custom ROM, so unrooting your device was a mistake, you have to root it again.
Now, i've never flashed Criskelo's ROM, but from what i've read in the thread, you need to root your device, flash Chainfire's ICS repack via mobile odin, and then flash criskelo rom via CWM. Do not unpack the .zip file, you need to point CWM to that file.
Akiainavas said:
To start with - you need root to flash this custom ROM, so unrooting your device was a mistake, you have to root it again.
Now, i've never flashed Criskelo's ROM, but from what i've read in the thread, you need to root your device, flash Chainfire's ICS repack via mobile odin, and then flash criskelo rom via CWM. Do not unpack the .zip file, you need to point CWM to that file.
Click to expand...
Click to collapse
witch rom should i install first then?
and then with CWM to the zip file i can install this rom. thats nice
Who can help me with the rom i should have running on my note before i start this?
You should be on rooted ICS. Then you flash Criskelos rom from CWM
ossamatarek said:
Thanks for trying to help
Click to expand...
Click to collapse
upload it somewhere else then!
Belfia said:
You should be on rooted ICS. Then you flash Criskelos rom from CWM
Click to expand...
Click to collapse
i've downloaded
N7000XXLPY
and root my device
but i don't see any CWM ?
i see super user but no cwm..
what am i doing wrong or what am i forgetting..
can't remember flashing was this hard on my HTC and Samsung Wave.....
who can help me out plz?
Richard.p.struike said:
i've downloaded
N7000XXLPY
and root my device
but i don't see any CWM ?
i see super user but no cwm..
what am i doing wrong or what am i forgetting..
can't remember flashing was this hard on my HTC and Samsung Wave.....
who can help me out plz?
Click to expand...
Click to collapse
When you boot into recovery, is it CWM recovery?
If you are talking about not seeing the CWM app, don't worry about that.
andreww88 said:
When you boot into recovery, is it CWM recovery?
If you are talking about not seeing the CWM app, don't worry about that.
Click to expand...
Click to collapse
no still boots android revovery
i've tried 3 times but still the same
Richard.p.struike said:
no still boots android revovery
i've tried 3 times but still the same
Click to expand...
Click to collapse
So you have to flash the CWM.zip file found in drketan's thread in android development.
Hey,
i wanted to flash from an unsafe kernel(ZCLP5) to a safe one and got the recent CM10 kernel (Kernel_CM10.1_20130130_Nightly_CWM.zip),
i then went into recovery mode and flashed the zip from sdcard and yeh here i am.
After the samsung logo appears i get a black screen and the software buttons flash once, no way to go into recovery or download mode.
When checking out the logcat with adb and grepping for "error" and "fail" i can see that the device fails to call eglInitialize (EGL_BAD_ALLOC) that, i guess, is initializing the OpenGL ES graphics lib.
So i'm a developer myself but not into android, where do i go from here?
Best greetings and thanks for support in advance.
What Rom did you have before?
I guess CM kernel doesn't work with your Rom (if it's TW).
Did you press the three buttons long enough for getting into recovery or download mode?
Easiest way: If you really do not get into recovery you should download a Stock Rom and install it with PC Odin.
ThaiDai said:
What Rom did you have before?
I guess CM kernel doesn't work with your Rom (if it's TW).
Did you press the three buttons long enough for getting into recovery or download mode?
Easiest way: If you really do not get into recovery you should download a Stock Rom and install it with PC Odin.
Click to expand...
Click to collapse
Hey,
yes i'm sure i pressed them long enough.
I was on one of the first ics releases ported from a galaxy S2 i'm quite sure this one:
http://forum.xda-developers.com/showthread.php?t=1516515
I guess for pc odin i need to be in download mode that is also not accessible :/
Tanks, and greetings.
EDIT:
Oh man somehow i get into download mode now, i swear i tried several times.
So you recommend that i flash stock rom now?
Will heimdall also work instead of odin?
lj_1102 said:
Hey,
yes i'm sure i pressed them long enough.
I was on one of the first ics releases ported from a galaxy S2 i'm quite sure this one:
http://forum.xda-developers.com/showthread.php?t=1516515
I guess for pc odin i need to be in download mode that is also not accessible :/
Tanks, and greetings.
EDIT:
Oh man somehow i get into download mode now, i swear i tried several times.
So you recommend that i flash stock rom now?
Will heimdall also work instead of odin?
Click to expand...
Click to collapse
Yes, heimdall will work I think.Flash a stock GB ROM.
So one of these will do it?
http://forum.xda-developers.com/showthread.php?t=1424997
lj_1102 said:
So one of these will do it?
http://forum.xda-developers.com/showthread.php?t=1424997
Click to expand...
Click to collapse
yeah lookout for your country rom
Sent from my GT-N7000 using Tapatalk 2
Thanks for your support guys, after flashing stock rom, the stock launcher was broken but i was able to get to the settings via the status bar and by that enable usb debugging.
Then i pushed and installed clockwork recovery and after that flashed the current cyanogen mod.
:good:
Logo screen and no recovery mode
i installed german stock rom and then my phone wasnt opening properly then i closed phone and went into recovery mode did a wipe reset in CWM mode so damn me stupid i did something i shouldnt now i stuck in logo and cant get in to recovery mode
Desparoux said:
i installed german stock rom and then my phone wasnt opening properly then i closed phone and went into recovery mode did a wipe reset in CWM mode so damn me stupid i did something i shouldnt now i stuck in logo and cant get in to recovery mode
Click to expand...
Click to collapse
don't say that you have the stock kernel..! you might have hard bricked your note please consider the pit file method to recover it http://forum.xda-developers.com/showthread.php?t=1667886
Sent from my GT-N7000 using Tapatalk 2
abhinav quietly brilliant said:
don't say that you have the stock kernel..! you might have hard bricked your note please consider the pit file method to recover it http://forum.xda-developers.com/showthread.php?t=1667886
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
yes was stock kernel what ever is that kernel i dont even know its name now the problem is people keep saying install kernel these that but i cant open that damn recovery mode in phone or just stuck in logo menu so sad me my lovely phone diedddddddddddddd
Desparoux said:
yes was stock kernel what ever is that kernel i dont even know its name now the problem is people keep saying install kernel these that but i cant open that damn recovery mode in phone or just stuck in logo menu so sad me my lovely phone diedddddddddddddd
Click to expand...
Click to collapse
If you can go into download mode, flash a stock GB ROM and wipe from 3e recovery (normal recovery)
i dont know how to use that pit my phone cant get into recovery mode if anybody knows it please help me to get out from this or show me a thread that some other people fixed this problem
warfareonly said:
If you can go into download mode, flash a stock GB ROM and wipe from 3e recovery (normal recovery)
Click to expand...
Click to collapse
hello can you be my guide how do i flash stock GB at this point im tottaly mess up with phone right now nobody help here i might lose some thread basically show me and i ll read i m scare to make my phone brick
---------- Post added at 03:52 PM ---------- Previous post was at 03:39 PM ----------
warfareonly said:
If you can go into download mode, flash a stock GB ROM and wipe from 3e recovery (normal recovery)
Click to expand...
Click to collapse
yes i can go on recovery mode and download mode now can u be my guide what to do
Desparoux said:
hello can you be my guide how do i flash stock GB at this point im tottaly mess up with phone right now nobody help here i might lose some thread basically show me and i ll read i m scare to make my phone brick
---------- Post added at 03:52 PM ---------- Previous post was at 03:39 PM ----------
yes i can go on recovery mode and download mode now can u be my guide what to do
Click to expand...
Click to collapse
download the rom from here http://forum.xda-developers.com/showthread.php?t=1424997
then you need to put the phone in download mode and connect to PC.. open odin and it should show that the phone is connected by showing a Yellow Box with COM:X
once this is done, place the rom (tar.md5 file) in the PDA tab (if only 1 rom file) and appropriate places if 3 rom files.
the press start.. the phone will start downloading. let it finish and the phone will reboot.. once done.. boot into recovery and choose factory reset. (GB rom is safe to reset using stock recovery)
nokiamodeln91 said:
download the rom from here http://forum.xda-developers.com/showthread.php?t=1424997
then you need to put the phone in download mode and connect to PC.. open odin and it should show that the phone is connected by showing a Yellow Box with COM:X
once this is done, place the rom (tar.md5 file) in the PDA tab (if only 1 rom file) and appropriate places if 3 rom files.
the press start.. the phone will start downloading. let it finish and the phone will reboot.. once done.. boot into recovery and choose factory reset. (GB rom is safe to reset using stock recovery)
Click to expand...
Click to collapse
THE PROBLEM İS NOW NAND writing start!! stuck what to do now please step by step im sooo noob and try to fix something i get moreee problemmm
Go to the above thread and download the pit file from there. Then in odin select the pit file under pit tab. This will auto tick the repartition option. Then select the rom in pda again. Reboot the phone into download mode and try again.
Freezing on nandwrite start is not a good sign.
nokiamodeln91 said:
Go to the above thread and download the pit file from there. Then in odin select the pit file under pit tab. This will auto tick the repartition option. Then select the rom in pda again. Reboot the phone into download mode and try again.
Freezing on nandwrite start is not a good sign.
Click to expand...
Click to collapse
hey doc all problem is fixed now new problem i did all and then flashed ics rom both way from kies or odin after i install ics its becomes freezing i really wonder why to buy a new sd card no problem for me i ll buy a 32 but why phone freezing* is there any thread to fix that or what is solution or no solution just replace the mboard
What did you do? Repartition?
If that.. Then use a small rom.. Like slimbean or cm roms. You could also try slimwizz. Big roms may not work properly.
nokiamodeln91 said:
What did you do? Repartition?
If that.. Then use a small rom.. Like slimbean or cm roms. You could also try slimwizz. Big roms may not work properly.
Click to expand...
Click to collapse
because they said so its only way to fix or if i did untick repartition will it still flash i wasnt sure there is no fix for that i dont like custom roms i think stock roms not bad about speed especailly 4.0.4 what if 4.1.2 come up ?
In this case, you could try with the J leaks which are small like slimwizz. Stock ICS roms are huge so may cause trouble. But you could try some stock based custom roms out there.
Hope you guys can help me.
Was updating my ICS (Criskelorom) to JB 4.1.2 XXLT6 ROM of Philz (PhilZ-cwm6-XXLT6-XSA-5.06.1.tar.md5) via Odin 3.07. Initially had some issues but, managed to get to where Odin resulted in a PASS. On REBOOT I only get up to the Samsung Galaxy GT-N7000 screen with a yellow ! triangle at the bottom. I was able to get to both Recovery and Download modes but would never get passed to homescreen and just stay on black screen.
Did it several times and got worried I'd brick my phone so I ran the ICS zip I had stored on my SD via Recovery mode and was able to get my phone running. Still want to pursue my JB upgrade though but, not sure if I was doing it right. Any help would be much appreciated guys.
Here is what I did...
MADE SURE OF THE FF.:
1) Install USB driver for Samsung Galaxy Note to transfer files between the phone and the computer using download of KIES from Samsung site
2) Enable USB Debugging Mode on the phone to connect the Android device with the computer
3) created a back-up of my contacts only
4) charged to above 80% battery charge
5) The phone should be factory unlocked and not locked to any particular carrier - I had unlocked it during my ICS upgrade from the GB original OS
THEN FOLLOWED THE STEPS:
Step-1: Download PhilZ-cwm6-XXLT6-XSA-5.06.1.tar.md5 for Samsung Galaxy Note to the computer
Step-2: Download Odin 3.07 which will help to install the root package on the phone. Extract the Odin zip to get Odin3 v3.07.exe file with some other files
Step-3: Place the Galaxy Note into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot appears on the phone's screen. Now press the Volume Up button to continue to enter into Download Mode
Step-4: Run Odin3 v3.07.exe as an Administrator
Step-5: Connect the Note to the computer using USB cable while it is in the Download Mode. Wait for some time until Odin detects the phone. When the device is connected successfully, the ID: COM box in Odin will turn yellow with the COM port number. Also, the successful connection will be indicated by a message saying Added in Odin.
Note: If the Added message does not come then try another US port, try the one located at the back side of the computer. If Odin still fails to detect the device then re-install USB driver
Step-6: In Odin, click the PDA button and select the PhilZ-cwm6-XXLT6-XSA-5.06.1.tar.md5 file
Step-7: Now configure the Odin settings. Ensure that the Auto Reboot and F.Reset Time checkboxes are selected in Odin. As for the Re-Partition, uncheck the option
Step-8: Once everything is set, click the Start button in Odin. The installation should begin now and would take about few minutes to complete
Step-9: When the installation process is completed the phone will restart automatically. And soon a PASS message with green background will appear in the Odin indicating successful installation. After the home screen appears on the phone, unplug the USB cable from the device to disconnect it from the computer
Was able to reach Step-9 but my phone would not get to home screen.
Please help me with any advise anyone can give me?
thanks.
By the way, saw another option for Steps 5-6:
Step-5: Connect your Note N7000 with your PC using a data cable. Once the device is successfully connected, you will see a notification in Odin in the bottom left saying Added!! - if for some reason, you do not see the said notification, try another USB port. Also, check for ID:COM port being depicted by a number in yellow to make sure that you have successfully added your device.
Select the following files in Odin at their respective tabs from extracted XXLT6 firmware folder:
Step-6:
Click the PDA button to select the .tar file extracted earlier.
Click the Phone button, and select file with *modem* in its name (ignore, if this file does not file exist).
Next, click the CSC button, and select file with *csc* in its name (ignore, if this file does not file exist).
Click the PIT button to select the .pit file. (ignore, if this file does not file exist).
Ensure that Auto Reboot and F. Reset Time are the only options selected in Odin window. Also ensure to select Re-Partition checkbox only if you are using a .pit file.
Except since I only had the TAR file I ignored the rest so I assumed I was doing it right up to that point. Also, the YELLOW highlight in Odin 3.07, wasn't yellow but kind of light blue.
That was it. All I did. Still, not succesful.
Please help.
Thanks.
Phew! That's a lot to read.. The file you are trying to flash is just a kernel not a whole rom. That's why your phone after the flash has a JB kernel and ICS rom. That's why the phone does not boot. To upgrade to JB, download a stock rom from sammobile.com and flash it using Odin the same way just in PDA of Odin.
nokiamodeln91 said:
Phew! That's a lot to read.. The file you are trying to flash is just a kernel not a whole rom. That's why your phone after the flash has a JB kernel and ICS rom. That's why the phone does not boot. To upgrade to JB, download a stock rom from sammobile.com and flash it using Odin the same way just in PDA of Odin.
Click to expand...
Click to collapse
Sorry about the read. =)
Was thinking I'd rather be complete than have anyone helping need to ask more clarifications to help me. =D
Oh that's why. Thanks for the reply. I will do that.
So I need to get the WHOLE ROM from the site you mentioned. A ROM that is complete, Kernel and all. Actually I thought I did get a complete ROM. Did not realize it was just a Kernel. What would be the best way to determine if a ROM is complete? What is usually the size of the file itself? The one I downloaded was like 8MB so I thought that was pretty big. Kinda looked for awhile for that XXLT6 original JB ROM so didn't stop to think if it was just a Kernel. My bad.
By the way, are the ROMs on Sammobile rooted? Or do I need to root them?
thanks again!
izmoothski said:
Sorry about the read. =)
Was thinking I'd rather be complete than have anyone helping need to ask more clarifications to help me. =D
Oh that's why. Thanks for the reply. I will do that.
So I need to get the WHOLE ROM from the site you mentioned. A ROM that is complete, Kernel and all. Actually I thought I did get a complete ROM. Did not realize it was just a Kernel. What would be the best way to determine if a ROM is complete? What is usually the size of the file itself? The one I downloaded was like 8MB so I thought that was pretty big. Kinda looked for awhile for that XXLT6 original JB ROM so didn't stop to think if it was just a Kernel. My bad.
By the way, are the ROMs on Sammobile rooted? Or do I need to root them?
thanks again!
Click to expand...
Click to collapse
They are just stock roms, to root again use the philz kernel but for jb this time. Also use the .zip this time instead of tar file, you can flash the zip file from stock recovery itself. You can raed more in philz kernel thread
Sent from my GT-N7000 using Tapatalk
treacherous_hawk said:
They are just stock roms, to root again use the philz kernel but for jb this time. Also use the .zip this time instead of tar file, you can flash the zip file from stock recovery itself. You can raed more in philz kernel thread
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
Got it, thank you Sirs you've all been a very big help. I ran into some issues with TW right after completing the install of 4.1.2. Every darn thing was stopping even acore and TW. Was about to chicken out and go back to my safety ICS ROM when I got to read some stuff about needing to Clear/Reset on Recovery mode after any firmware flashing as well as Clearing the Cache so I did. And voila, it worked. I think I'll rest my worrying brain for now on the root. =P
I'll root it next week. I'll just have fun with it for now. Been up playing around with this for over 24hours now. Having too much fun but already drained.
Thank you again for you help!
same situation here...!!!
hello XDA ppl...
I had ICS 4.0.4 and attempted to use PhilZ-cwm6-XXLTA-ATL-5.15.0.tar.md5.
That took me to the same situation I think... kernel for JB and ICS ROM...
I power on my phone and it gets to a GT-N7000 Note + Yellow Triangle screen and NO MORE!
I can get to PhilZ Recovery Mode or ODIN Download Mode.
That´s all...
I will attempt right now what you told the creator of this thread and update if it helped.
any help is welcome...
FIXED!!!
AWESOME!!!
My bot is back again!!!
Thanks a lot guys...
This thread worked as a charm. :victory:
1. Odin 3.0.X
2. Factory Firmware
3. Flash it as PDA.
4. No yellow triangle.
5. Removed battery and waited 5 seconds.
6. recovery mode.
7. clear data/factory reset.
Done!
---------- Post added at 03:33 AM ---------- Previous post was at 03:28 AM ----------
juliowong said:
AWESOME!!!
My bot is back again!!!
Thanks a lot guys...
This thread worked as a charm. :victory:
1. Odin 3.0.X
2. Factory Firmware
3. Flash it as PDA.
4. No yellow triangle.
5. Removed battery and waited 5 seconds.
6. recovery mode.
7. clear data/factory reset.
Done!
Click to expand...
Click to collapse
Well... finally I am back to ICS.
Now gotta find a safe way to get it to JB.
juliowong said:
Now gotta find a safe way to get it to JB.
Click to expand...
Click to collapse
Safest way to get to JB with wipe (that is formatting) is to get philz kernel for ICS and then reboot to recovery do factory reset and wipe /system /data /internal storage /cache and then reboot to download mode and flash JB from odin. Else if you dont want to loose data, just boot into download mode and flash JB using odin.
juliowong said:
6. recovery mode.
7. clear data/factory reset.
Well... finally I am back to ICS.
Now gotta find a safe way to get it to JB.
Click to expand...
Click to collapse
Yeah!! May be you want to start by not wiping on a stock ICS kernel.
Please help,
I was trying to root my Samsung galaxy note gt-i9220, I followed the video instructions from rootgalaxynote.com, I used the CWM.Zip, CWM-supers-v0.87.zip and after I installed the franco kernel-r5.zip
PROBLEM: after installing the franco kernel when I restarted the system my note comes on and shows Galaxy Note GT-I9220 and after that I have a black screen.
What can I do to get back the original state, it seems I can not handle rooting it. However it can get to the download mode when I place the volume up+power+home burton.
NB: I did not use a computer while doing this neither did I backup any thing
What rom where you on before installing the new kernel?
tudeine said:
Please help,
I was trying to root my Samsung galaxy note gt-i9220, I followed the video instructions from rootgalaxynote.com, I used the CWM.Zip, CWM-supers-v0.87.zip and after I installed the franco kernel-r5.zip
PROBLEM: after installing the franco kernel when I restarted the system my note comes on and shows Galaxy Note GT-I9220 and after that I have a black screen.
What can I do to get back the original state, it seems I can not handle rooting it. However it can get to the download mode when I place the volume up+power+home burton.
NB: I did not use a computer while doing this neither did I backup any thing
Click to expand...
Click to collapse
Hello.
ROM type
nokiamodeln91 said:
What rom where you on before installing the new kernel?
Click to expand...
Click to collapse
Am sorry to say but I have no idea which rom I was using, this was my first time rooting, a friend of mine bought me this phone on a visit to china, and so I believe it was the custom rom.
And I remember it was running version 4.1.2 of the Operating system, am sorry am making it difficult to get help, but a gud learning lesson, please help.
tudeine said:
Am sorry to say but I have no idea which rom I was using, this was my first time rooting, a friend of mine bought me this phone on a visit to china, and so I believe it was the custom rom.
And I remember it was running version 4.1.2 of the Operating system, am sorry am making it difficult to get help, but a gud learning lesson, please help.
Click to expand...
Click to collapse
As far as i remember there is no franco kernel for jb 4.1.2. That's why your phone cannot boot.
The worst is flash back a stock rom unless you remember your firmware version then you can flash philz kernel
Philz kernel/stock rom
Rosli59564 said:
As far as i remember there is no franco kernel for jb 4.1.2. That's why your phone cannot boot.
The worst is flash back a stock rom unless you remember your firmware version then you can flash philz kernel
Click to expand...
Click to collapse
Ok, thanks for the help so far, I have been reading different threads about the stock rom and philz kernel,
I could not identify my stock rom, am wondering could you be knowing stock rom for the gt-i9220 if yes, please pass me the link where I can download it.
I wanted to try out that n if it does not help I can go for philz kernel.
tudeine said:
Ok, thanks for the help so far, I have been reading different threads about the stock rom and philz kernel,
I could not identify my stock rom, am wondering could you be knowing stock rom for the gt-i9220 if yes, please pass me the link where I can download it.
I wanted to try out that n if it does not help I can go for philz kernel.
Click to expand...
Click to collapse
try flashing any of the JB version of Philz kernel like DDLSC using recovery of franco kernel. You should be able to get into CWM recovery,
power failure
nokiamodeln91 said:
try flashing any of the JB version of Philz kernel like DDLSC using recovery of franco kernel. You should be able to get into CWM recovery,
Click to expand...
Click to collapse
I guess ma problems are too many, after downloading philz kernel and transferring it to an external memory card, I cannot get into the recovery mode which I were able to get to 2 days back.
I did not do anything else from the day I was trying to root and things back fired, I thought the battery had been used up but even after charging I get nothing apart from the phone being warm, when I insert the charger all I see is a battery with a circle that flashes and disappears, flashes and disappears.
Any ideas or this marks the end of this gadget
Download mode? If yes then you can flash a rom using Odin or flash Philz kernel also using Odin.. If no.., you may need to try a charged battery.
Black screen
nokiamodeln91 said:
Download mode? If yes then you can flash a rom using Odin or flash Philz kernel also using Odin.. If no.., you may need to try a charged battery.
Click to expand...
Click to collapse
I guess I have to look for a charged battery, odin cannot read the phone, however I would like to know when I unzip philz kernel folder, there are other files and I understand odin(never used it before) has options like partition,auto reboot, F.time, Boot loader,PDA, phone, csc
I need to know which ones should I select, and if am using PDA which file from extracted philz kernel do I select.
tudeine said:
I guess I have to look for a charged battery, odin cannot read the phone, however I would like to know when I unzip philz kernel folder, there are other files and I understand odin(never used it before) has options like partition,auto reboot, F.time, Boot loader,PDA, phone, csc
I need to know which ones should I select, and if am using PDA which file from extracted philz kernel do I select.
Click to expand...
Click to collapse
For flashing Philz kernel using odin you need to use .tar file instead of .zip file. Also no need to extract anything from .tar file. Leave everything in odin as it is and put the .tar file in PDA section, if at all odin can detect your phone. remember, this needs to be performed in download mode.
I made it
treacherous_hawk said:
For flashing Philz kernel using odin you need to use .tar file instead of .zip file. Also no need to extract anything from .tar file. Leave everything in odin as it is and put the .tar file in PDA section, if at all odin can detect your phone. remember, this needs to be performed in download mode.
Click to expand...
Click to collapse
Thanx so much man, thanks a bunch, I can say the phone is up and running, however, everything is in Chinese, I do not Chinese, I cannot tell what the words mean, but all I know the philz kernel procedure using odin has worked.
now I need help to change the language, did I download the wrong kernel,
this is what I used: PhilZ-cwm6-DDLSC-ODD-4.93.6.tar,md5
Another problem I have observed, when you switch on the device it brings a yellow triangle with an exclamation mark in the middle
tudeine said:
Thanx so much man, thanks a bunch, I can say the phone is up and running, however, everything is in Chinese, I do not Chinese, I cannot tell what the words mean, but all I know the philz kernel procedure using odin has worked.
now I need help to change the language, did I download the wrong kernel,
this is what I used: PhilZ-cwm6-DDLSC-ODD-4.93.6.tar,md5
Another problem I have observed, when you switch on the device it brings a yellow triangle with an exclamation mark in the middle
Click to expand...
Click to collapse
Do you mean everything is in chinese in recovery or it boots up to home screen and there everything is chinese? You can leave the yellow triangle alone, first get it working once it does you can use triangle away app from xda or play store to remove it.
Sent from my GT-N7000 using Tapatalk
working
treacherous_hawk said:
Do you mean everything is in chinese in recovery or it boots up to home screen and there everything is chinese? You can leave the yellow triangle alone, first get it working once it does you can use triangle away app from xda or play store to remove it.
Sent from my GT-N7000 using Tapatalk[/QUOTE
What I meant, the phone boots up to home screen but everything was in Chinese, however, I managed to change the language to English, now the phone is working I can receive and make calls,browse, I have the supersu icon (I do not know what it does) on my home screen and some icons are in Chinese, I still don't have play store, and I still have the yellow triangle.
Below are my phone details now:
model nmbr: GT-N7000
android version:4.1.2
baseband: I92220ZCLSG
KERNAL VERSION: 3.0.31-906407
BUILD NUMBER: JZO54K.I9220ZCLSG
DO I HAVE TO CHANGE, OR THIS IS OK
Thanx so much mean while atleast its now up and running
Click to expand...
Click to collapse
I think the Chinese version didn't have playstore and all. You may need to flash a rom of n7000 to get all the access..