Hi;
I have an usb OTG cable and Micro Sd Card reader for using HTC ONE. At first it was worked well.. But after a while my phone doesn't recognize. I tried mouse with OTG cable and it worked. I tried another usb flash and it worked too. But this sd card is not working. By the way, I can see the sd card and format it on my computer. I tried FAT32, NTFS and Ext24. I installed the Paragon but no luck.
What do i must check?
Related
Title says it all. I unmounted as I should have before turning off USB storage, but when I unplugged the USB cable, it said I have a damaged SD card and that I may need to format it. I hit the OK to format and nothing happened. I tried rebooting and nothing happens. I'm rooted with CM 3.9.7 mod, A2SD, etc. I've tried flashing the recovery, etc, but it can't mount the SD card and so fails. Any help would be greatly appreciated. Thanks.
nspbass
You can go to Target and buy a Dane-elec 4GB for ten dollars.
It comes with a micro-sd usb card reader.
Probably in order to fix your situation you may need a micro sd usb card reader to reformat and repartition.
You can now do this through adb.
http://forum.xda-developers.com/showthread.php?t=534714
Clay
Just reformat it in a card reader.
reformat the card, wipe and reflash the ROM.
Hi all. I just got a new X1 a few days ago. Pretty happy to have it, however, I'm having chronic problems flashing a rom on it using the micro SD method. I have a PNY Micro SD card, and after hard spl-ling my phone, I put a rom on the micro SD card in the root, renamed it to KOVSIMG.nbh, powered the phone off. Removed the battery and micro SD, reinserted everything, and when I powered it back up, I got the tri-colored screen, then it said no image file. For some reason, this PNY card isn't being recognized by my computer, so I can't reformat it with my computer. Can somebody please either tell me how to format the card on my X1 or direct me to the most current and reliable USB method thread please. Thanks.
[A] Micro SD Flashing method won't work
Hi x1-pc7,
try this:
http://forum.xda-developers.com/showthread.php?t=787867
In Summary,
try to copy all your microsd contents somewhere else temporarily. e.g. your pc desk top
FORMAT you SD card as FAT or FAT32.
try the micro SD method.
sorry, i mis-read your post, you knew all that above...
To format your sd micro card, you would need a card reader to format your sd card.
card reader that handles the microsd, or put the micro sd into a sd card adapter, usually provided with the microsd card, and put this into a sd card reader.
Hope this helps!!
Have a Happy New Year!!
chinkyeyed09 said:
Hi x1-pc7,
try this:
http://forum.xda-developers.com/showthread.php?t=787867
In Summary,
try to copy all your microsd contents somewhere else temporarily. e.g. your pc desk top
FORMAT you SD card as FAT or FAT32.
try the micro SD method.
sorry, i mis-read your post, you knew all that above...
To format your sd micro card, you would need a card reader to format your sd card.
card reader that handles the microsd, or put the micro sd into a sd card adapter, usually provided with the microsd card, and put this into a sd card reader.
Hope this helps!!
Have a Happy New Year!!
Click to expand...
Click to collapse
Listen. I said that my micro SD does not get recognized by my computer. I have an adapter, but my computer won't recognize it. Read the whole post, and please show me where it talks about how to use the USB method to flash because the micro SD method will absolutely not work for me.
Thanks.
Happy New Year to you too.
usb method is simple
just turn device off.push the volume bottom in(& keep it in) then push power & keep both in until bootloader screen appears.then connect to usb.run Xperia Software Upgrade...Done!
x1-pc7 said:
Listen. I said that my micro SD does not get recognized by my computer. I have an adapter, but my computer won't recognize it. Read the whole post, and please show me where it talks about how to use the USB method to flash because the micro SD method will absolutely not work for me.
Click to expand...
Click to collapse
You could try to change your USB to PC setting to "Disk Drive" (Start » Settings » Connections). This way your phone will only show your microSD card instead of both internal memory and SD contents.
See if that enables you to format your SD card.
x1-pc7 said:
For some reason, this PNY card isn't being recognized by my computer, so I can't reformat it with my computer.
Click to expand...
Click to collapse
Not even without the X1, i.e. when using only your adapter?
Sounds like either the card or the adapter is broken - any chance to cross-check with another card/another PC?
Make sure your adapter can handle the card: (µ)SDHC cannot be read by older (µ)SD adapters....
Need some help pls. I formatted my SD card, inserted in the phone, came into boot loader mode, but no onscreen instuctions. Am I suppsed to run the upgrade sofeware becos the error from there is my phone is corrupted.
julyjat said:
Need some help pls. I formatted my SD card, inserted in the phone, came into boot loader mode, but no onscreen instuctions. Am I suppsed to run the upgrade sofeware becos the error from there is my phone is corrupted.
Click to expand...
Click to collapse
Are you trying to flash your phone? If you do, have you copy the new ROM to the SD card? (in root, not in any folder) And rename the ROM to "KOVSimg.nbh"
Then the boot loader mode will detect the ROM and show instructions.
However, if you're not trying to flash your phone, you don't need to enter the boot loader mode. Just do battery pull, and start your phone normally.
not dev related, therefore moved to q&a
My files on the external micro sd card goes missing randomly but when connected via USB the files are there. Also windows dosen't show me the drive for the micro sd when connected through usb in mass storage.
Best Regards,
Noy
Please try to format repartition your sd card in ext4
Good luck!
Hi,
I just tried to read an exFAT formatted microSD card via OTG (with a SD card converter and then a USB card reader) but fail.
When I did some search, I heard from other people that Note 8 can read exFAT format, but mostly they are referring to if I put the microSD card to one of the sim card slot.
However for my case, I don't want to put it there, since the microSD card that I want to access is from my Mavic Air, which I want to copy those 4K video and RAW photos to my phone directly. It is too troublesome if I need to remove the sim card slot, put it in, copy and then pull it out again...
So is there really no way that Note 8 can read exFAT microSD card via the OTG way?
Many thanks for any help that can be offered.:laugh:
is there a way to add more storage to google chromecast with google tv? i've tried many methods to have CC recognize my 128gb usb 3.0 fat32 flashdrive. I've gotten a usb c hub adapter with ethernet port, i've plugged the fat32 usb flash drive, formated it in google tv as internal storage, google tv sees the flash drive but i won't allow me to use it to transfer files, use it as extra sotrage etc etc. Anyone got a work around? I've factory reset this device but no luck.
drudgenator said:
is there a way to add more storage to google chromecast with google tv? i've tried many methods to have CC recognize my 128gb usb 3.0 fat32 flashdrive. I've gotten a usb c hub adapter with ethernet port, i've plugged the fat32 usb flash drive, formated it in google tv as internal storage, google tv sees the flash drive but i won't allow me to use it to transfer files, use it as extra sotrage etc etc. Anyone got a work around? I've factory reset this device but no luck.
Click to expand...
Click to collapse
Not really a work-around.
rodken said:
Not really a work-around.
Click to expand...
Click to collapse
I followed these instructions the other day but it didn't fix the issue. Thanks though.
drudgenator said:
I followed these instructions the other day but it didn't fix the issue. Thanks though.
Click to expand...
Click to collapse
Tried to format on Windows instead of formatting in Google TV?
rodken said:
Tried to format on Windows instead of formatting in Google TV?
Click to expand...
Click to collapse
yes i formated it using my windows laptop to fat32, then plugged it to the usb c hub, formatted it again using ccwgtv as internal stoage but still can't use the flashdrive for anything. If anyone here was able to expland their CCwGTV, please post the steps here. Thank you.
I used an old 16GB USB 2.0 stick, formated with AOMEI on a windows laptop, inserted into a USB type C hub to my CCwGTV and now in
Settings/Storage
in the internal storage I can see the 4,4 GB original space plus the 14,8 GB usb stick.
I also own a 256 GB USB 3.0 stick, inserted into the USB type C hub's second slot, which is presented as "External disk" in the storage menu.
Qiao Zhi said:
I used an old 16GB USB 2.0 stick, formated with AOMEI on a windows laptop, inserted into a USB type C hub to my CCwGTV and now in
Settings/Storage
in the internal storage I can see the 4,4 GB original space plus the 14,8 GB usb stick.
I also own a 256 GB USB 3.0 stick, inserted into the USB type C hub's second slot, which is presented as "External disk" in the storage menu.
Click to expand...
Click to collapse
+1