hello new to flasing obviously had my phone rooted and downloaded cm10.1 file along with gapps seperately but after wiping data . clear partition data, dalvik cache and then trying to install this rom it says error, aborted installation status 7. what can be the cause? im restoring back to stock rom till i can find out why this happened. i tried it several times but kept aborting. please help
Related
hi all, i have an insteresting problem while upgrading from GB 2.3.6 to ICS.
i tried all the versions of kernels and ROM's here and was unable to find a solution.
1. when i am on GB i go into CWM, do all the possible wipes
2. i install from SD the new ICS version
3. after the installation i do all the wipes again
4. then i reset the device.
each time, the device is showing me the startup animation and then i get a screen saying that the encryption was unsuccessful.
nothing helped from there, i did wipe to factory default again - did not help, i re-flashed again - nothing helped.
i am stuck on GB without being able to use the good ROM's we have in this forum.
please help if you can.
thanks in advanced.
Did u try slim ICS rom http://forum.xda-developers.com/showthread.php?t=1488096
Boot into recovery(CWM)
Do factory reset
Wipe cache
wipe dalvik cache
Flash the base file
Flash the essentials file
wipe dalvik cache
reboot
no, did not work.
after i finished all the steps the device started with the boot animation and again - encryption unsuccessful .
BTW, an interesting issue, after the encryption unsuccessful i got the device back into recovery mode and when i tried to load another zip from the sdcard i got an error in the device saying that my sdcard cannot be found.
any solution to that?
Did you check this thread ?
http://forum.xda-developers.com/showthread.php?t=1447303
i have done this a long time ago.
and got to step 9, which afterwards i was supposed to have the ICS working but still i got the "encryption unsuccessful " error.
i was actually looking also for ICS files to use via Odin (maybe that will solve the problem) but did not found any.
Try asking in the same thread abouth the encryption error
dvdscr said:
hi all, i have an insteresting problem while upgrading from GB 2.3.6 to ICS.
i tried all the versions of kernels and ROM's here and was unable to find a solution.
1. when i am on GB i go into CWM, do all the possible wipes
2. i install from SD the new ICS version
3. after the installation i do all the wipes again
4. then i reset the device.
each time, the device is showing me the startup animation and then i get a screen saying that the encryption was unsuccessful.
nothing helped from there, i did wipe to factory default again - did not help, i re-flashed again - nothing helped.
i am stuck on GB without being able to use the good ROM's we have in this forum.
please help if you can.
thanks in advanced.
Click to expand...
Click to collapse
From jvu, to install Slim ICS 2.8, in cwm factory reset/wipe cache/wipe delvik/format system/format cache/format datadata , flash 2.8 Essentials i9000 first then Base 2.8 (if bootloops pullout battery, put it back, enter recovery, reset, wipe, flash base again) and then Essentials again.
Hi,
I have international version of Note, and I was running ICS repack LP1 with MIUI + go launcher, and I was checking out ICS stunner.
I had CWM back up, so I tried to restore MIUI WITHOUT any wipe, and it got to error msg.
I restarted my phone, and tried it again AFTER I wiped Data + Dalvik, and the phone seemed stuck, so i restarted manually again.
And I wiped data + Dalvik to install old MIUI or ICS Stunner, and I am stuck in CWM installation mode FOREVER.
Finding update package...
Opening update package...
Installing update...
That's all it says, and the bar isnt moving either...
Can anyone help advise anything or how i should fix this?
I am tried to use ODIN to re-flash LP1 file I saved on desktop, but having problem with that too...
/cry!!!
Hi everybody, I'm quite scary about what I've done today with my tab.
1. I was running under CM 9.1 stable and everything was fine.
2. I backed up my data using ROM Manager and tried today a nightly build of CM 10 from get.cm. I installed it from CWM as written in Cyanogen wiki. Before install I was warned about partition format that wasn't the same as previsouly, and I was asked to choose the update.zip again to enable the ROM flashing to start. CM 10 booted correctly, and it ran very well at first. Then I chose to install Gapps through CWM, the same I did for CM 10.
3. After rebooting, I experienced a bug: the included keyboard kept crashing and was then unusable. I decided then to restore my backup of CM 9 through CWM.
4. I did not encounter any trouble restoring the backup to my old CM 9. But I had no radio, no IMEI, no baseband etc.. in "settings/about the device" and at this point I didn't know that this was because "/radio" wasn't mounted.
5. Now I don't remember what I exactly did but I try wiping caches, restoring again, reinstalling CM 9 stable, reinstalling CM 10 stable, restoring my backup again, flashing the Kernel using Hemsfall but what I remember is:
- I first had problems with /cache
- After that I had the "E:format_volume: "make_ext4fs failed on /cache" message
- My tab reboots if I try to install CM9 stable
- I tried to install a fresh firmware through http://forum.xda-developers.com/showthread.php?t=1133590 but I get stuck at hidden.fs
Now my tab can only boot to CWM or download mode, and whether I choose to flash to CM9 or CM10 I get the message:
assert failed: getprop("ro.product.device")== "galaxtab"...
E: Error in /sdcard/cm-10-nightly....zip
(Status 7)
Installation aborted
I don't know what to do now, and I'm quite desperate right now, please help me to get rid of that "make_ext4fs" error. I'm really afraid.:crying:
When you update to cm10, the mtd partition scheme changed to a new one. Nandroid restore won't work until the partition is made back to the same as when backup was taken.
To be able to run cm again, you need to restock to GB using Odin,
then flash overcome kernel to get cwm.
Only the kernel, not the ROM.
Then use cwm to install cm,
then restore from nandroid.
Follow my signature for overcome guide.
Get GB stock safe v5, the PDF guide, and the overcome kernel.
Jump to page 7.
Sent from my GT-P1000 using xda app-developers app
Thanks you very much, be blessed, it works perfectly using your solution. I felt really really bad, thank you so much!
you are welcome.
You may want to try CM10 again.
Make sure you flash gapps for cm10 only, not gapps for cm9 or cm10.1
It shouldn't be as unstable as you said.
Hey there,
just tried to flash this ROM to my Ace.
I updated CWM to the required 6.0.5.3_1, wiped data/factory reset and formatted /system.
Everytime I try to install the .zip, I get the "installation aborted" message. No error code, no more information.
Would be awesome to get some help, cause i cant find this problem in the forum, only some with error codes.
I used an earlier version of CM on this device before trying to flash it now.
Greetings
Installed a non-modded version of CM now, which worked fine.
Getting the status 0 error now when installing the original CM gapps. Any solutions?
lolmachine said:
Installed a non-modded version of CM now, which worked fine.
Getting the status 0 error now when installing the original CM gapps. Any solutions?
Click to expand...
Click to collapse
1. Are you using a CM11 compatible recovery?
2. Are you the complete files downloaded? or have you an unstabe internet connection?
Try to donwload the files again
Hello
today before I install CM 12.1 on my XT1072 I clicked on wipe in TWRP then advanced wipe then I selected
* Dalvik cache
* Data
* Cashe
* System
I tried to install CM 12.1 after that but it gave me Error
now I don't have any os installed on my phone
So please if any one know a full rom link or any way to install the os again please help me with it
thank you very much
Hassan Qandil said:
Hello
today before I install CM 12.1 on my XT1072 I clicked on wipe in TWRP then advanced wipe then I selected
* Dalvik cache
* Data
* Cashe
* System
I tried to install CM 12.1 after that but it gave me Error
now I don't have any os installed on my phone
So please if any one know a full rom link or any way to install the os again please help me with it
thank you very much
Click to expand...
Click to collapse
Download from Cyanogenmod site the last nightly of CM for THEA (http://download.cyanogenmod.org/?device=thea)
Put it in the micro SD card of your phone (using another phone or the card reader of your PC if it has one)
In TWRP install the ROM from the external SD (and Gapps if you want to use them)
In this situation I think that the above method is the only one, but wait for other answers, it could be that someone can show you better ways.
when I tried to install CM 12.1 the same way you said .. the phone gave me a failure message
Hassan Qandil said:
when I tried to install CM 12.1 the same way you said .. the phone gave me a failure message
Click to expand...
Click to collapse
Can you report that message?
The first time you install a ROM after a system wipe (as you described), TWRP gives an error message, but, after system reboot (by TWRP function), the phone starts normally and CM starts the standard update procedure
I am not sure what do you mean exactly but the installation of cm 12.1 didn't even start
gave me error message .. I think that cm rom need stock rom to install over it
now I just want to install the official firmware .. but I didn't found any rom img files yet
I thank every one can help me ... it's my only phone :crying:
Hassan Qandil said:
I am not sure what do you mean exactly but the installation of cm 12.1 didn't even start
gave me error message .. I think that cm rom need stock rom to install over it
now I just want to install the official firmware .. but I didn't found any rom img files yet
I thank every one can help me ... it's my only phone :crying:
Click to expand...
Click to collapse
Mmh, it's a strange situation. I wiped system memory about three/four time on my phone (and also on my friend's phone) and the procedure I described to you worked for me every time. But the error message, in my case, was after CM installation and not before, as in your case.
Did you check the MD5Sum (or SHA) of the downloaded file to make sure it was not corrupted? The error you received can be related to a corrupted file...
Lastly take a look at this tool:
http://forum.xda-developers.com/mot...dows-tool-moto-g-2015-xt1072-restore-t3124915
I've never tried it but it seems to be suited to your case.