Database Develop

Getting back to 2.3 from ICS

Hey, I wanna to get back to 2.3 from MiniCM9 (nAa) and I don't know If I should first change kernel to standard, or first ROM to 2.3. Can somebody tell me?

mati96PL said:
Hey, I wanna to get back to 2.3 from MiniCM9 (nAa) and I don't know If I should first change kernel to standard, or first ROM to 2.3. Can somebody tell me?
Click to expand...
Click to collapse
First change rom to 2.3 then flash the appropriate kernel.
I don't think it really makes a difference, just that one is slightly less risky than the other.
Sent from my E15i using Tapatalk 2

Kernel then rom, if it's rom 1st then you MIGHT have to reflash the rom anyway

Lloir said:
Kernel then rom, if it's rom 1st then you MIGHT have to reflash the rom anyway
Click to expand...
Click to collapse
No need for reflash of rom in any circumstances... point is entering flash mode to flash correct kernel is much more doable and likelier to succeed than entering a kernel embedded recovery to flash a rom.
Hence rom first, then kernel.
Sent from my E15i using Tapatalk 2

Hmm... Who to trust?
I'm curently on nAa ICS kernel and his MiniCM9, and want to get back to Achotjan Semc Debrand Engine 2.3 with nAa 11 kernel

From my experience there is no difference at all because the kernel you wanna flash has a recovery and gives you the option to flash your rom. For example when I wanted to revert back to stock without using seus I flashed the rom first and then the kernel because if I did otherwise my device would be softbricked. I hope I made my self clear. The choice is up to you. But I like flashing the kernel first;-)
Sent from my U20i using xda premium

Ok, so I tried now with kernel first -> that doesn't work, now I'm going to check with rom first

you cant build a house without foundation! flashing the kernel first is only proper way to do this!

1.put 2.3 Rom in SD
2.flash a kernel
3.on 1st boot(at kernel logo)push back button rapidly to enter cwm
4.make a full wipe and install 2.3 rom
5.done

zmuhammx said:
1.put 2.3 Rom in SD
2.flash a kernel
3.on 1st boot(at kernel logo)push back button rapidly to enter cwm
4.make a full wipe and install 2.3 rom
5.done
Click to expand...
Click to collapse
exactly right~!

It doesnt mattersjust do both no matter which first
Sent from my E15i using XDA

[ROM][Stock GB 2.3.7]Stock Apanda rom

Here's the stock Apanda rom Android GB 2.3.7. I couldn't know anything about this rom as it won't let me pass the lockscreen. Lockscreen was similar to the spice stock rom. Don't know if it is any different.
Mod : edit removed this link
I flashed it but seems like the touch screen is not compatible with Spice mi 410.
[Edit] Flash 0.35 kernel(sharp/tj) to make touchscreen work -> Thanks to Abenagiel.
This didn't seem to be any better than sharp rom.
Before flashing this rom be sure to backup your imei. Me and Demonskill had problems of unknown imei number when we flashed the rom and tried to revert back using cwm restore. My personal suggestion, before you do cwm restore make sure to flash tj's rc3. Find more info about imei backup using 5iromtoolbox take a look at post by http://forum.xda-developers.com/showpost.php?p=28096182&postcount=3. Thanks to LibertyMonger
Steps to flash this rom:
(1) Go to download mode and Flash this rom via SUT.
(2) Go to download mode and place the recovery.img from tj_style for the new kernel 0.35
(3) Place this 0.35 sharp kernel on sd card https://www.dropbox.com/s/c2myh6s2kgb9wi6/sharp_Kernel.zip
(4) Flash the zip via recovery.
Mirrors for the rom, recovery and 0.35 kernel can be found in the post. Thanks to aloklike- MOD edit: removed link
MOD EDIT : ok guys and the OP
i see a lot of problems i think for the safety of all i am closing this thread and removing the links. if everything is ok PM me and ill open this thread

yup touchscreen doesn't work..
kernel problem..
flash with sharp rom or andro-id rc3 kernel,, and touchscreen will work again..
Sent from my FIH-FB0 using xda

abenagiel said:
yup touchscreen doesn't work..
kernel problem..
flash with sharp rom or andro-id rc3 kernel,, and touchscreen will work again..
Sent from my FIH-FB0 using xda
Click to expand...
Click to collapse
Does that mean flashing 0.35 kernel will fix the touchscreen. and make the rom work i will try

nayneshdev said:
Does that mean flashing 0.35 kernel will fix the touchscreen. and make the rom work i will try
Click to expand...
Click to collapse
yup.. work for me..
Sent from my FIH-FB0 using xda

abenagiel said:
yup.. work for me..
Sent from my FIH-FB0 using xda
Click to expand...
Click to collapse
hi
sorry slightly confused r u saying if we flash RC3 or sharp and then flash this rom it will work or What

haree said:
hi
sorry slightly confused r u saying if we flash RC3 or sharp and then flash this rom it will work or What
Click to expand...
Click to collapse
not like that..
we need to replace the stock kernel with rc3 kernel or sharp kernel to make the touchscreen work..
or maybe we can replace touchscreen files with rc3 or sharp (never try this)
Sent from my FIH-FB0 using xda

abenagiel said:
not like that..
we need to replace the stock kernel with rc3 kernel or sharp kernel to make the touchscreen work..
or maybe we can replace touchscreen files with rc3 or sharp (never try this)
Sent from my FIH-FB0 using xda
Click to expand...
Click to collapse
hi
sorry still confused ok simple question
im right now on the recent kernal ie im using MatBlks CM9
now if i flash this rom will it work
Edit : got my answer on the 1st page not trying ill wait for ur new ROM

its working .....
----deleted----

the file has been deleted, can u re-upload it..
thanks

[ROM]
----deleted----

Op forgot to mention in thread title this is Stock GB 2.3.7
to Install
Flash nb0 with SUTLR
Replace recovery with CWM5.XX
flash sharp Kernel with CWM
reboot

----deleted----

aloklike said:
hey mattBLK,
which kernel are you using with this rom,how is battery life on this rom ..........
Click to expand...
Click to collapse
not sure what original name was i renamed it? i was trying to find in a separate thread but noone posted so i found this.. it has OC upto>1600Mhz and smartassV2. what is the other kernel like that was posted here?
Just noticed the subtle changes in settings with 2.3.7 with added cell broadcast

aloklike said:
uploading on mediafire ..... plz wait .....
here it is ....
Apanda 2.3.7 :: http://www.mediafire.com/?69xvxkbkdcvy6t9
recovery :: http://www.mediafire.com/?dpphpw3r8z3qhmp
kernel :: http://www.mediafire.com/?2w67p3wot3x9w3t
Steps to install :
1. put kernel zip in sdcard
2. install rom via SUT (erase user data option)
3. go to donload mode and replace recovery file
4. install kernel.zip via cwm
Click to expand...
Click to collapse
Try this also, Kernel from Abenagiel's GingerMia V1 it comes with more governor.
Hit Thanks if I help

how stable is this stock rom running on other. 35 kernels like mia and rc3?
got icv problem? or any bugs?

cheezzzz said:
how stable is this stock rom running on other. 35 kernels like mia and rc3?
got icv problem? or any bugs?
Click to expand...
Click to collapse
very stable no fc no bugs for me with the kernel im using, camera & camcorder still zooms.. just use another launcher and get rid of all the bloatware/5keyboards

Guess I will have to try this, hope it is more stable than Sharp ROM. Sharp ROM has been rebooting and just had an awful freezeup while playing a basic game. Lost sensor functionality and had to pull battery. I have no luck with any ROM really wish we had one "go-to ROM" that is fully stable.

Actually this ROM is for K41 devices, not for FB0/1/3 devices. But since K41 devices is using similiar hardware with FB0, so this ROM is still compatible with our devices
Sent from my W700

tj_style said:
Actually this ROM is for K41 devices, not for FB0/1/3 devices. But since K41 devices is using similiar hardware with FB0, so this ROM is still compatible with our devices
Sent from my W700
Click to expand...
Click to collapse
(0_0!)
wow the master was here..
there was FB1-FB3 devices??
#tumbennongolom??

tj_style said:
Actually this ROM is for K41 devices, not for FB0/1/3 devices. But since K41 devices is using similiar hardware with FB0, so this ROM is still compatible with our devices
Sent from my W700
Click to expand...
Click to collapse
after flashing this rom i am having issues with unknown imei number.so it seemed like i had lost my imei number, but after flashing rc3 i again recovered it this is the reason why i removed the link but couldnt post this information sooner then this. Those who are using this please backup your imei first using 5iromtoolbox app available on xda also on ideos x5 forum.
Sent from my Desire HD using xda app-developers app

[Q] Help with my Galaxy Note

Hi, I need help with my Galaxy Note. I just buy secondhand Galaxy Note, it has XXLS2 4.1.1 rom for now. I want flash AOSPA 4.2.1 rom on it. My previous phone was HTC HD2, so I'm used to flashing without limitation So, I need your help to tell me if I'm thing good about it. So, firstly I must flash Philz kernel for my phone, to get root and recovery. But for my rom is only version 2.7... is it safe to flash? And next I can just do full wipe, reboot, and flash AOSPA 4.2.1 rom, yes?

You won't be able to flash a aokp rom using philz 2.7 as it will not install and error 7.
-Install Philz and gain root and cwm
-Then place all the required files to flash the rom to storage.
-Then flash a different safe kernel like hydracore or cm kernel.
-Boot into recovery and do wipes and formats and flash. the rom. (while on a different kernel you might not be able to boot into the rom. Just recovery)

And version 2.7 is safe? Why there is no 3.99 version for this rom? But when I finally flash PA rom, I can stay with kernel included in this rom? Or I need to flash cm kernel second time? I'm going to make backup before flashing new rom, but I'm just wondering if I can normally recover this on PA rom or I need to flash stock philz kernel before restoring... So the "diffrent safe" kernel may be "Kernel_CM10.1_20130126_Nightly_CWM.zip", yes? It will work with aosp based pa rom? I'm going to flash 2.99 version...

sinedoOo said:
And version 2.7 is safe? Why there is no 3.99 version for this rom? But when I finally flash PA rom, I can stay with kernel included in this rom? Or I need to flash cm kernel second time? I'm going to make backup before flashing new rom, but I'm just wondering if I can normally recover this on PA rom or I need to flash stock philz kernel before restoring... So the "diffrent safe" kernel may be "Kernel_CM10.1_20130126_Nightly_CWM.zip", yes? It will work with aosp based pa rom? I'm going to flash 2.99 version...
Click to expand...
Click to collapse
Yes 2.7 is safe. Just that it cannot install some roms.
Because it's and old kernel.
Yes stay with the kernel included in the rom
Yes PA has a safe kernel and the backup can be restored.
Any kernel like hydracore or cm will do.
Also 2.99 PA might not to that's stable. So.. Your choice. You can use and older version like 2.57 as well

Actually Philz 2.7 is ICS/older JB, and therefore not subject to error 7. Good to wipe and Flash ROMs with. (It's safe too)
Sent from my GT-N7000 using xda app-developers app

shoey63 said:
Actually Philz 2.7 is ICS/older JB, and therefore not subject to error 7. Good to wipe and Flash ROMs with. (It's safe too)
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Need to meditate

GT N7000
hi frds i am having a issue with Amnix Xperia ROM Build 3 for GT N7000. After I installed my antivirus & later when it finished scanning for malware it gives warning about one app - MALICIOUS APP
VOODOO-INSTANT-ANTI-EXYNOS-MEM-ABUSE-0.3.APK
EXPLOIT.EXYNOS.A
can someone pls help....is it a virus....

It's already replied in the noob friendly thread

I forget to reply, sorry. Thanks! It is all working good, so I have now my Galaxy Note with newest Paranoidandroid rom

[Q] Mixed ROM and Kernel

Hi i'm new here, just installed Carbon Rom JellyBean v1.7 Release and the kernel is from the ROM itself (3.0.31-CM-g209ebe6)
Question is:
1) Can i install SpeedMod N7000 Jelly Bean Kernel on that ROM?
2) If yes, Can this ROM be installed with ANY N7000 Kernel?
Big thanks and sorry if i'm being too noob
And excuse my english, too

No, the speedmod is for the Touchwiz based [TW] ROMs. Carbon ROM is CyanogenMod [CM] based. So not all kernels can be installed on any ROM, when u read a kernel thread, you'll have the compatibility of the kernel with ROMs written in that. Never flash any kernel on an incompatible ROM, may lead to a brick.

Oh i see. So is it okay if i install CM9 Kernel on a CM10.1 ROM?

I am not sure about tthat, but better not flash it on CM10 as most likely it won't work, CM 10 is a totally new version. Better not try it.

No. You cant flash different version kernel on different roms. CM10.1 only supports CM10.1 kernels. Currently there are NX kernel and Asylum kernel for this.
Remember never flash different kernel on different rom. This will brick your device.

Alright thanks. Any recommendations of kernel that can do over clock and gaming ? Currently my Real Racing 3 just plays at 12fps.. That's unplayable for me. Thanks before
Sent from my GT-N7000 using Tapatalk 2

NX kernel for CM based ROMs, check out the various kernels in the Android Development thread... Many CM based ROMs will have the CPU frequency option in the performance control menu. Careful, overclocking can have adverse effects, may fry up the motherboard...

Thanks, that kernel should have increase my performance right?
But signal problem was reported if i'm not mistaken. So i'm a bit confused as i do a lot of phone calls.

http://forum.xda-developers.com/showthread.php?t=2192893&highlight=nx+kernel Read the features of the kernel in this thread. No there wont be any connectivity issues, NX kernel or the CM kernel are stable ones. If there are some issues, then flash a stable version of those kernels.

OK, when the process is successful, will i lose my data?

If you just flash the kernel then no you won't. You lose the data only if you do a Factory reset (Data wipe from the recovery). You have already installed Carbon ROM now just go to recovery and flash the .zip kernel file.

Then what about if i want to Change ROM , but it requires wiping data. If i restore the CWM backup , then it'll get to the previous ROM, no?

raihan4 said:
Then what about if i want to Change ROM , but it requires wiping data. If i restore the CWM backup , then it'll get to the previous ROM, no?
Click to expand...
Click to collapse
Yes, you can backup and restore CWM

Galaxtus said:
Yes, you can backup and restore CWM
Click to expand...
Click to collapse
NO, i mean this:
I have ROM A , i backup via CWM then i flash ROM B. To flash , i must wipe data. Then i wipe data.
If i restore backup from CWM, will i get ROM A or still ROM B ?
excuse my poor english

raihan4 said:
NO, i mean this:
I have ROM A , i backup via CWM then i flash ROM B. To flash , i must wipe data. Then i wipe data.
If i restore backup from CWM, will i get ROM A or still ROM B ?
excuse my poor english
Click to expand...
Click to collapse
If your ROM A is completely backed up. Yes after wiping data and restoring you will get ROM A and ROM B will be completely gone

Galaxtus said:
If your ROM A is completely backed up. Yes after wiping data and restoring you will get ROM A and ROM B will be completely gone
Click to expand...
Click to collapse
So to backup contacts apps etc.. Can I use ROM Toolbox's app manager? Thanks
Sent from my GT-N7000 using Tapatalk 2

Yes you can, back up contacts using google account or even via apps like go backup. Apps back up can be done via Titanium Backup, it is very convenient.

Well then thanks guys , really appreciate your help
Sent from my GT-N7000 using Tapatalk 2

raihan4 said:
NO, i mean this:
I have ROM A , i backup via CWM then i flash ROM B. To flash , i must wipe data. Then i wipe data.
If i restore backup from CWM, will i get ROM A or still ROM B ?
excuse my poor english
Click to expand...
Click to collapse
Rom a.
Sorry, bit late off the mark, didn't see the second page :sly:
Sent from my GT-N7000 using xda premium

n7000 weird error please help!

Accidently deleted the internal sd card from the settings and now the phone can not boot into recovery.. basically when i turn the phone off i cant turn it back on.. But i can turn it back on using the charging method.. Currently typing this on the phone.. Tried to install cwm using the rommanager but no luck.. Is there a way to fix this problem?or is there anyone else having this problem?please help! Thank you

Flash Philz kernel through Odin (Download .tar version of any recent Philz kernel, go into download mode on your phone and flash in Odin). Once that is done then you can boot into JB 4.1.2 TW or you will still have to flash an AOSP kernelto boot into AOSP ROMs (CM, AOSPA, Slime Bean etc.) after this.

That will raise your Flash counter so you'll need to use triangleaway after.
Sent from my GT-N7000 using XDA Premium 4 mobile app

XxPixX said:
Flash Philz kernel through Odin (Download .tar version of any recent Philz kernel, go into download mode on your phone and flash in Odin). Once that is done then you can boot into JB 4.1.2 TW or you will still have to flash an AOSP kernelto boot into AOSP ROMs (CM, AOSPA, Slime Bean etc.) after this.
Click to expand...
Click to collapse
I forgot to mention that I am running cm10.2 nightly. Doss that still apply to me? Thanks for responding to this thread

duator2002 said:
I forgot to mention that I am running cm10.2 nightly. Doss that still apply to me? Thanks for responding to this thread
Click to expand...
Click to collapse
Yes, read previous post again.
Sent from my GT-N7000 using XDA Premium 4 mobile app

damn.. apparently this was a bug from 26/08/2013 cm 10.2 nightly.. this has happened to my other mate's i9100 as well.. going to try flashify for root users when i get a chance to help them out but thanks for your heads up! and i'm sorry for reposting such obvious bug on the thread little bit of research was sufficient for this case thank you all very much! God bless!