Database Develop

[Q] i9000 tried to flash CM9...kinda fsck'ed

[email protected],
after successfully flashing CM9 to my Defy I convinced my friend to go to ICS as well...so far so good/bad!
I followed the guide to install CMW recovery and did a backup of the stock ROM.
After this I copied CM9 nightly and the google apps package to the internal memory...apperantely the zip package of the google apps was bad, so i tried to boot into CM9..it took a damn long time, so I removed the battery (OK, bad move...but so be it don't bit*h about it!)..CM9 booted but said someting about "encryption of the storage failed..please do a factory wipe"......I did so, using CWM recovery...which ended me up in a boot loop without having access to CMW recvry.
So I thought, flashing the zImage again with heimdall will have the bootloader rewritten (maybe the 2nd bad move this day) so I can access recovery again...I imagined zImage was kinda like a BIOS of a PC...apparently it is NOT
After some google-f00 I found out I have to flash an official FW from samsung, with repartitioning,using odin, am I right?
But the probel is, that they tell me to do a *#7465625# to find out details about the stock firmware...but this is not bossible because the phone hangs at the galaxy s boot logo.
So my question is...what can I do to access either recovery or the stock firmware with a phone stuck at boot logo (i can boot into download mode) and having only a nandroid backup of the stock rom?
Can anybody tell me what to do without spending 200 coins to obtain another SGS for my friend (Yeah, I told him that the risk is to brick the SGS, but I have a kind of guilty conscience.
Hope someone can help...
Thanks a lot!

Odin doesnt care about whats currently on your phone . Just go to samfirmware. Com, find a nice stock rom (2.3.3) for i9000, and flash it with odin. If you dont know how to use odin: use the search button in the i9000 section ''how to use odin''. keep us updated / or if you have any other questions :thumbup:
Stoux
Edit: Check this thread out http://forum.xda-developers.com/showthread.php?t=1102881
Sent from my GT-I9000 using xda premium

hey
when i screwed my sgs, odin + darky ressurection rom helped
i can't post a link , google "Darkys_v9.2_Resurrection_Edition.zip" ,though i can't remember if i used that version. some got removed, try to look for a sourceforge link. That still works
and see the reply above how to use odin

Hey,
There are also lots of tutorials on youtube, and other sites to show how to flash an original rom. I also screwed up my install of CM9. And then I followed this guide to get the original rom running again.
w w w.theandroidsoul.com/download-install-xxjvs-firmware-update-galaxy-s-i9000-to-android-2-3-5/
After that, use this link for rooting + CWM:
w w w.theandroidsoul.com/root-xxjvs/
Greets from Holland !
PS: can't link -_- so you have to copy and paste the URL.

Skeesicks said:
[email protected],
after successfully flashing CM9 to my Defy I convinced my friend to go to ICS as well...so far so good/bad!
I followed the guide to install CMW recovery and did a backup of the stock ROM.
After this I copied CM9 nightly and the google apps package to the internal memory...apperantely the zip package of the google apps was bad, so i tried to boot into CM9..it took a damn long time, so I removed the battery (OK, bad move...but so be it don't bit*h about it!)..CM9 booted but said someting about "encryption of the storage failed..please do a factory wipe"......I did so, using CWM recovery...which ended me up in a boot loop without having access to CMW recvry.
So I thought, flashing the zImage again with heimdall will have the bootloader rewritten (maybe the 2nd bad move this day) so I can access recovery again...I imagined zImage was kinda like a BIOS of a PC...apparently it is NOT
After some google-f00 I found out I have to flash an official FW from samsung, with repartitioning,using odin, am I right?
But the probel is, that they tell me to do a *#7465625# to find out details about the stock firmware...but this is not bossible because the phone hangs at the galaxy s boot logo.
So my question is...what can I do to access either recovery or the stock firmware with a phone stuck at boot logo (i can boot into download mode) and having only a nandroid backup of the stock rom?
Can anybody tell me what to do without spending 200 coins to obtain another SGS for my friend (Yeah, I told him that the risk is to brick the SGS, but I have a kind of guilty conscience.
Hope someone can help...
Thanks a lot!
Click to expand...
Click to collapse
hmmm... i read from another site there are some custom rom that requires the phone to be in a rooted stock rom or another custom rom...
example:
to install Galaxy S GT I9000 with Orange Amestris v7.3 ROM Custom Firmware you need to be on stock XWJW1 or XXJVU Firmware since the baseband of "amestris" would be on xwjw1 or xxjvu or custom rom with the same baseband...
what stock rom/firmware the phone was in anyway?im guessing gingerbread stock rom? you still got a chance to update it right since you can access download mode...
from what i can remember, i updated my boyfrnd's s2 from gingerbread to official ics from "sammobile".com (remove quote)
then updated it to a custom rom...
well this might be irrelevant but this is how i updated my galaxy s:
well on my galaxy s i updated it from gingerbread stock rom rooted to gingerbread miui then to ics miui andy's version, since im on ics i have successfully tried different ics custom rom like darknight, slimics, elite etc...
hope this kinda help =]

Thanks a lot...I flashed the original firmware (it didn't start properly, but I don't care) and with this was able to flash the zImage again...then I was able to access bootloader and reinstall CM9

Unbrick Samsung Galaxy Note GT-N7000

Having looked at the thread regarding a similar predicament that I have (http://forum.xda-developers.com/showthread.php?t=1783556), I'm keen to know I can use ODIN to put on a new ROM. Basically these are the steps I've followed;
1. Used KIES to update my ROM from Gingerbread to ICS
2. Use ODIN to update root my phone with CM9 safe kernel (not knowing it would have been significantly better to have copied my new AOKP ICS ROM to the internal SD card first)
3. Rebooted my phone and cannot get past 'SAMSUNG GALAXY NOTE GT-N7000' logo.
4. I can still boot into download mode and use ODIN but wondered how I should use it to install a ROM as none of the ROM's I've downloaded, are in the correct .tar, md5, smd format, that OSIN is looking for ?

Some pretty basic reading for you: http://forum.xda-developers.com/showthread.php?t=1321268
Enjoy.

Moved To Q&A​
Please do not start question threads in the development section​

baseliner said:
Having looked at the thread regarding a similar predicament that I have (http://forum.xda-developers.com/showthread.php?t=1783556), I'm keen to know I can use ODIN to put on a new ROM. Basically these are the steps I've followed;
1. Used KIES to update my ROM from Gingerbread to ICS
2. Use ODIN to update root my phone with CM9 safe kernel (not knowing it would have been significantly better to have copied my new AOKP ICS ROM to the internal SD card first)
3. Rebooted my phone and cannot get past 'SAMSUNG GALAXY NOTE GT-N7000' logo.
4. I can still boot into download mode and use ODIN but wondered how I should use it to install a ROM as none of the ROM's I've downloaded, are in the correct .tar, md5, smd format, that OSIN is looking for ?
Click to expand...
Click to collapse
First of all, I'm not sure if this is the answer your looking for, but here is it anyway.
IN PC ODIN, there is a 'PDA' button (same button you flashed your kernel to), you need to download the ROM's zip file and flash it from there.

Stock ROM file you download is zip, you need to extract it one time to get into .tar, then you can use that file with pda of odin.
Sent from my GT-N7000 using xda premium

dr.ketan said:
Stock ROM file you download is zip, you need to extract it one time to get into .tar, then you can use that file with pda of odin.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Would these be the files needed to get my phone back up and running? I am new to Android and screwed my phone up after a factory reset, now it just reads downloading for ages and does nothing. I still get a screen that reads Hyperdroid RedPill Recovery when i power on with volume button up pressed. Volume down I get Android man and it reads downloading but does nothing.
I have looked all over for this situation but seem to get a piece here and there and not the exact same issue all in one so I am reluctant to just do something and make it worse.
Please advise

That is downloading mod, it won't do anything but remain as it is, if you don't do anything.
You need to connect you device to PC in this state and have to use odin
Read 1st line on my sign and read post#2, you will get full instruction, how to use odin.
Sent from my GT-N7000 using xda premium

[Q] Stuck in bootloop after reverting to Gingerbread from CM 10

Hello everyone.
I have a problem which I hope you'll be willing and able to help with.
I wanted to try out CyanogenMod 10 on my Galaxy S I9000. I was on 2.3.3 so I used Odin to update to 2.3.6 (rooted). Then I installed superuser and mod manager, after which I installed Clockwork. I then used Clockwork to install CM 10. It worked flawlessly and this was my first time flashing ever.
However, I didn;t like CM 10 and decided to revert back to Gingerbread. I read it was as easy as simply using Odin to flash 2.3.6 again. I tried that but got stuck into a bootloop displaying the S sign over and over and over again. I tried downloading the PIT file which made Odin check Repartition by default and flashing like that but it didn't help, I'm still stuck in bootloop. I can access download mode without a problem but I'm stuck in bootloop forever.
Any help would be greatly appreciated. Thank you in advance.

Update: I found a thread detailing how to get back to Froyo so I tried it. I used a PIT file, PDA file, PHONE file and CSC file all separately and it worked. Now I'll just have to update back to 2.3.6 No idea why I was only able to revert back to Froyo and not Gingerbread, but it worked, thread can be closed.

Hey,
Bit of a late answer, but so you can refer to it if you ever go back to custom roms.
When you come back to stock from CM10, or any custom rom for that matter, you need to flash in a file named dbsdata.rfs.tar. Fixes the bootloops (custom roms and stock have different data partitions so incompatibilities in data partition cause bootloops like yours)
Sent from my GT-I9000 using xda premium

[Q] bricked N7000. how to get working again

I tried upgrading my international N7000 to CM10.3 following the instructions in
http://wiki.cyanogenmod.org/w/Install_CM_for_n7000
but now the phone won't even boot into the recovery, all it shows is
Samsung
GALAXY Note
GT-N7000
/ \
/ | \
/--*-\
When i tried flashin from my Mac iusing Heimdall,
the download finished on the mac, but on the N7000
it still showed the blue line etc. I waited a lng time and tried
rebooting, but got the above.
Re-flashing in Heimdall had no effect.
I then tried flashing
hardcore-speedmod-ics-recovery-n7000.tar
using Odin 3.185 from my VMwars Fusion XP install,
and that seemed to finish ok, but no luck either.
I looked for the latest CWM 6.0.4.3 recovery, but I cannot find any
odin-flashable format for it, and of course I cannot use the sdcard
as I cannot even boot into any recovery as is.
Can anyone suggest next steps?

sejtam said:
I tried upgrading my international N7000 to CM10.3 following the instructions in
http://wiki.cyanogenmod.org/w/Install_CM_for_n7000
but now the phone won't even boot into the recovery, all it shows is
Samsung
GALAXY Note
GT-N7000
/ \
/ | \
/--*-\
When i tried flashin from my Mac iusing Heimdall,
the download finished on the mac, but on the N7000
it still showed the blue line etc. I waited a lng time and tried
rebooting, but got the above.
Re-flashing in Heimdall had no effect.
I then tried flashing
hardcore-speedmod-ics-recovery-n7000.tar
using Odin 3.185 from my VMwars Fusion XP install,
and that seemed to finish ok, but no luck either.
I looked for the latest CWM 6.0.4.3 recovery, but I cannot find any
odin-flashable format for it, and of course I cannot use the sdcard
as I cannot even boot into any recovery as is.
Can anyone suggest next steps?
Click to expand...
Click to collapse
1st things 1st. Why would u use heimdall or odin? And what is your current ROM before trying to flash CM 10.3, was it stock? You should have looked for CWM recovery or Philz safe kernels as base when doing ROM flashing ESPECIALLY custom roms. From what you said, then can you still boot into download mode? I have no knowledge of heimdall so just download Stock Firmware, flash it with odin and see if you can boot your N7000 first.
The worst case scenarios is you are experiencing emmc bug-brick. go to the thread and read carefully to deduce your type of 'brick' and find solutions there. Good Luck.

I was on a stock 4.0.4 (but rooted). I originally tried flashing the cwm from the sd card, but after starting to load it it also just hung,
so I looked for an alternative..
I found a post on stockroms (http://forum.xda-developers.com/showthread.php?t=1424997) but the links all point to hotfile.com. which my browser says it cannot find. is hotfile dead? Is there an alternative?

sejtam said:
I was on a stock 4.0.4 (but rooted). I originally tried flashing the cwm from the sd card, but after starting to load it it also just hung,
so I looked for an alternative..
I found a post on stockroms (http://forum.xda-developers.com/showthread.php?t=1424997) but the links all point to hotfile.com. which my browser says it cannot find. is hotfile dead? Is there an alternative?
Click to expand...
Click to collapse
Go to sammymobile.com if I'm not wrong. Download the stock firmware there. Rooted but do u have cwm installed? Rooted doesn't mean you have cwm installed.
Sent from my GT-N7000 using XDA Free mobile app

same problem
Jackwu696 said:
Go to sammymobile.com if I'm not wrong. Download the stock firmware there. Rooted but do u have cwm installed? Rooted doesn't mean you have cwm installed.
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
i have the same problem , only mine loads into the recovery menu , ive tried finding a working odin to nstall it back to factory.
when i had this problem last night , i wasnt sure what i done but i managed to install a custom rom and that worked but now i seem to be getting status 7 error ,
my computer wont recognise my phone so i cant do anything that way . any ideas or links to solutions will be appreciated

i have the same problem

conanbrapp said:
i have the same problem , only mine loads into the recovery menu , ive tried finding a working odin to nstall it back to factory.
when i had this problem last night , i wasnt sure what i done but i managed to install a custom rom and that worked but now i seem to be getting status 7 error ,
my computer wont recognise my phone so i cant do anything that way . any ideas or links to solutions will be appreciated
Click to expand...
Click to collapse
I'm sorry so did u succeed or did you not succeed in installing the custom rom? If your custom rom boots fine then all u need is to search for solving status 7 error thread. My advice to all noobs is to always try n avoid installimg anything except stock rom in odin. Always read and re read before flashing anything that's beyond your knowledge. Basic knowledge of flashing cusroms is :
1. ALWAYS make sure you're on SAFE and COMPATIBLE KERNEL. Most rom threads ALWAYS Include threads/links to a specific recovery/kernel to use. Read n RE READ that.
2. Wipe everything IN RECOVERY mode before flashing a rom.
Sent from my GT-N7000 using XDA Free mobile app

fixed miine
Jackwu696 said:
Go to sammymobile.com if I'm not wrong. Download the stock firmware there. Rooted but do u have cwm installed? Rooted doesn't mean you have cwm installed.
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
Jackwu696 said:
I'm sorry so did u succeed or did you not succeed in installing the custom rom? If your custom rom boots fine then all u need is to search for solving status 7 error thread. My advice to all noobs is to always try n avoid installimg anything except stock rom in odin. Always read and re read before flashing anything that's beyond your knowledge. Basic knowledge of flashing cusroms is :
1. ALWAYS make sure you're on SAFE and COMPATIBLE KERNEL. Most rom threads ALWAYS Include threads/links to a specific recovery/kernel to use. Read n RE READ that.
2. Wipe everything IN RECOVERY mode before flashing a rom.
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
im not Sure what i did , i unbricked (soft) and successfully installed kitkat not sure exactly how but it worked.... still have root too ... had and error about needing to wipe data for suib i think but thats the only fallback i fell into

conanbrapp said:
im not Sure what i did , i unbricked (soft) and successfully installed kitkat not sure exactly how but it worked.... still have root too ... had and error about needing to wipe data for suib i think but thats the only fallback i fell into
Click to expand...
Click to collapse
If you're able to boot up properly n prompted to wipe, then do it. But do it in recovery not on device.

Ok, I downloaded one of the stock kernels for my internatinal N7000, but flashing that with Odin 3.185 hangs about 3/4 through (has now been
sitting there for >60 mins).
Looks like I am screwed?
The file I found is KIES_HOME_N7000XXLT4_N7000OXALT4_1103517_REV02_user_low_ship.tar.md5
I f I wanted to try flashing this with Heimdall, I'd need to know partition numbers I think
Where can I get those?
Or should I get another file?

sejtam said:
Ok, I downloaded one of the stock kernels for my internatinal N7000, but flashing that with Odin 3.185 hangs about 3/4 through (has now been
sitting there for >60 mins).
Looks like I am screwed?
The file I found is KIES_HOME_N7000XXLT4_N7000OXALT4_1103517_REV02_user_low_ship.tar.md5
I f I wanted to try flashing this with Heimdall, I'd need to know partition numbers I think
Where can I get those?
Or should I get another file?
Click to expand...
Click to collapse
Before that, do u have KIES installed? KIES is NOT compatible with odin and will cause potential trouble. So is some firewall and antivirus apps. You need to disable all of them before using odin. Please search the thread http://www.sammobile.com/firmwares/ for stock rom site.
Sent from my GT-N7000 using XDA Free mobile app

Ok. I downloaded two stock roms from sammobile:
[email protected] 1 mathias staff 808649674 May 9 10:53 N7000XXLT5_N7000MBCLT1_MBC.zip
[email protected] 1 mathias staff 750466356 May 9 10:50 N7000XXLRL_N7000OXELR5_MBC.zip
but both fail with some (unreadable, apparently character set issue) error under ODIN.
I found this:
http://droidangel.blogspot.sg/2012/01/samsung-galaxy-note-gt-n7000-all.html
which shows how to do a full flash , including PIT file, but the links again go to hotfile which seems to be down.
http://hotfile.com/dl/140099962/b9e0d63/Q1-20110914_16GB.pit.rar.html
Where can I get a) separate
CODE_N7000xxxxx_CLxxxxxxx_REVxx_user_low_ship.tar.md5
MODEM_N7000xxxxxx_REV_00_CLxxxxxx.tar.md5
GT-N7000-CSC-MULTI-xxxxxx.tar.md5
and the PIT file?

sejtam said:
Ok. I downloaded two stock roms from sammobile:
[email protected] 1 mathias staff 808649674 May 9 10:53 N7000XXLT5_N7000MBCLT1_MBC.zip
[email protected] 1 mathias staff 750466356 May 9 10:50 N7000XXLRL_N7000OXELR5_MBC.zip
but both fail with some (unreadable, apparently character set issue) error under ODIN.
I found this:
http://droidangel.blogspot.sg/2012/01/samsung-galaxy-note-gt-n7000-all.html
which shows how to do a full flash , including PIT file, but the links again go to hotfile which seems to be down.
http://hotfile.com/dl/140099962/b9e0d63/Q1-20110914_16GB.pit.rar.html
Where can I get a) separate
CODE_N7000xxxxx_CLxxxxxxx_REVxx_user_low_ship.tar.md5
MODEM_N7000xxxxxx_REV_00_CLxxxxxx.tar.md5
GT-N7000-CSC-MULTI-xxxxxx.tar.md5
and the PIT file?
Click to expand...
Click to collapse
Of course you fail... When using ODIN, U should have downloaded the .tar. if you downloaded a zip. then unzip it first to get the tar file, then you flash it with odin. All requests are included in the stock.tar And PLEASE DO NOT Play with PIT files if you don't know what you are doing.
So now what you need to do is. :
1. DISABLE KIES (Uninstall it better), Your firewall, antivirus.
2. Install CORRECT Samsung USB driver. (Search keyword "download samsung N7000 usb drivers")
3. Unzip your zip file and extract the tar.file.
4. Run ODIN as Administrator (Right click/run as)
5. Go to download mode. connect your device to Pc/laptop.
6. Wait until Odin detects your device, click AP/PDA and choose the tar file you extracted.
7. DO NOT tick partition.
8. Let it run

Of course I unzipped the zip to get a SINGLE .tar.md5, but flashing that fails on factoryfs about 3/4 through. consistently.

sejtam said:
Of course I unzipped the zip to get a SINGLE .tar.md5, but flashing that fails on factoryfs about 3/4 through. consistently.
Click to expand...
Click to collapse
Try updating your odin. Use the newest vers. And try and read this https://www.google.com/url?q=http:/...ds-cse&usg=AFQjCNGd2e3iG5hkDeo0KyAjGuCSfQSLUw . If All fails then it's a confirmed SUPER-BRICK and there's nothing except samsung service centre can help you now... Sorry for not being able to help more..

Thanks. That led me to
http://forum.xda-developers.com/showthread.php?t=1656635
where I found the PIT file, but for ROMs pointed to http://forum.xda-developers.com/showthread.php?t=1530501
which again points to hotfile and fileserve.com , which (besides being under maintenance) says
FileServe can only be used to download and retrieve files that you have uploaded personally.
which makes it useless for finding ROMs...

sejtam said:
Thanks. That led me to
http://forum.xda-developers.com/showthread.php?t=1656635
where I found the PIT file, but for ROMs pointed to http://forum.xda-developers.com/showthread.php?t=1530501
which again points to hotfile and fileserve.com , which (besides being under maintenance) says
FileServe can only be used to download and retrieve files that you have uploaded personally.
which makes it useless for finding ROMs...
Click to expand...
Click to collapse
His link to ROMS were basically the same ones you can download at sammobile.

I9000 Wont boot no service mode is it bricked?

I9000 Wont boot no service mode is it bricked?
hello i was trying to update the the stock recovery service boot options on my gt I9000 so i could upgrade to CyanogenMod 10.2 Android 4.3 Jelly Bean.
but i kept getting "E signature failed" in the service boot options, so i tryed to update the service mode screen and so it
would get rid of the "E signature error" with odin.
i opened an update rar file instead of a tar (should have noticed) and ran odin it failed and now i cant,
get my gt I9000 to boot into service mode or start up.
when i do try to start phone the up i just get an picture of a *Phone ! Pc*
http://dl-1.va.us.xda-developers.com/thumbs/2/3/6/7/6/6/4/2367664.jpg
i can only access download mode volume down+home+power key
i tryed to install and run "Heimdall version 1.3.1 from the guide in the thread (link below)
http://forum.xda-developers.com/showthread.php?t=1886393
but it wont install i just get MSCVR100.DLL Errors i reinstalled vcredist_x86.exe
and tryed to register the dll from cmd but it didn't work.
Im just looking through this thread on bricked the I9000 (link below)
http://forum.xda-developers.com/showthread.php?t=2434225
And trying the steps in that post.
i did backup using titanium and saved the entire contents of my phone to my pc can i restore my phone from that, via the Pc?
is there a way to replace the boot loaders on the phone with odin or another program?
it was Froyo 2.0 JPO
can anyone advise me what i can do please?

Update
Hi just a quick update
i reinstalled windows 7 on a old harddrive and managed to install heimdall & oneclick unbrick installed on that
in the cmd box it says
Error: Null
Set Temporary Folder:C:\Users\xai\AppData\Local\Temp\\xaiHeimdallOneClick\
Log:C:\Users\xai\AppData\Local\Temp\\xaiHeimdallOneClick\log.txt
Operating System: Windows
Found Heimdall Version: Heimdall v1.0.2b
Is the Null Error a problem?
the oneclick unbrick window says
Set Temporary Folder:C:\Users\xai\AppData\Local\Temp\\xaiHeimdallOneClick\
Log:C:\Users\xai\AppData\Local\Temp\\xaiHeimdallOneClick\log.txt
Operating System: Windows
Found Heimdall Version: Heimdall v1.0.2b
Ive installed the samsung drivers Pc installed compensate device and mass storage or something.
Im on an old pc with crap internet connection which keeps disconnecting every few mins, and it makes trying to view threads very difficult, am trying to find some threads i was looking in at the time of posting my op
is it safe to go ahead with the unbricking?
some advice at this point would be greatly appreciated
Thank's :

Futher Update
So i took the plunge an Clicked Unbrick, it then said it needed to install drivers, i followed the steps it then gave me and i clicked show all devices then my device was found, it installed the zadig drivers etc and then configured it all by its self and restarted my phone
All is good and well again
At this point ide like to thank the members whos contributions/guides on the forum helped me get things back on track and a big shout out to the heimdall/oneclick unbrick developers :good:
You all have done/do some great work
Thanks Again folks!!! :good:
Yours Sincerly Xai

Downgrade E3 To E2 Recovery
hello again
I'm trying to downgrade recovery mode from E3 To E2, ive searched and read a few of the threads but I'm still unsure what do to
I've got a...
GT I9000 (international sim free)
Firmware
2.2
Baseband
I9000xxjpp
Kernal Version
2.6.32.9
Build Number
Froyo.xxjpo
I was gonna open CF-Root-XX_XEU_JPO-v1.2-busybox-1.17.1 in odin and hit PDA.
theres a few conflicting guides on how and what to do and a few of the guide take me to links that want to install stuff on my pc etc which i dont trust.
some links say it will work as i decribed there others say you need a stock recovery file or an e2 recovery file for the Froyo.
im lost with how to proceed, can anyone help or link me to the files i need please?
Thank's Xai

E2 is totally outdated thing, why would you need that?
What is your point, what do you desire to install?
tetakpatalked from Nexus 7 flo

tetakpatak said:
E2 is totally outdated thing, why would you need that?
What is your point, what do you desire to install?
tetakpatalked from Nexus 7 flo
Click to expand...
Click to collapse
Hello Tetakpataki hope your good & thank's for your reply :good:
i was trying to apply the lag fix but it wouldn't install cos i was in recovery E3 and kept geting the "E Signature" failed error
Ive since flashed my phone with "speedmod-kernel-k13c-500hz.tar" and can now access E2 recovery but I'm now stuck in clockworkmod recovery v2.5.1.0 speedMod ULFK.
When i flashed it it auto check repartition i didn't notice till it was too late.
Every time i try to start the phone it goes to "clockworkmod recovery v2.5.1.0 speedMod ULFK" screen and i cant get out it, i can still get into download mode, but the phone wont boot up normaly
Ive flashed with bootloader "i9000 boot.tar.md5" but that didn't work i change the extension to "i9000 boot.tar" it flashed but i still goto recovery.
Ive read through a lot of threads and guides a lot of the links to files i apparently need are down
I'm at a total loss as what i can do now? i cant find the froyo stock rom or the bootloader either (international version) can someone help me out please?
My phone is
GT I9000 (international sim free)
Firmware
2.2
Baseband
I9000xxjpp
Kernal Version
2.6.32.9
Build Number
Froyo.xxjpo
I hope that makes thing easyer
Any help would be greatly appreciated thank's

Can you reach the download mode?
tetakpatalked from P5110

tetakpatak said:
Can you reach the download mode?
tetakpatalked from P5110
Click to expand...
Click to collapse
Hiya Tetakpatak :good:
yes i can get into download mode
im just having a look at Xsenman's "[Toolkit][A.I.O Rescue & Recovery] My Android Collection" thread (link below) and seeing if i can do anything suggested there
http://forum.xda-developers.com/showthread.php?p=29331775#post29331775
I'm gonna try "Make CWM Recovery .img's into .tar.md5 odin flash-able files 1 CLICK " and see if that works
also ive gotta try mount the sd cards internal & external so im having a look at that too
I'l let you know what happens any other advice would be great thanks

xai25 said:
I'm gonna try "Make CWM Recovery .img's into .tar.md5 odin flash-able files 1 CLICK " and see if that works
http://forum.xda-developers.com/showthread.php?t=2281287
Click to expand...
Click to collapse
I tryed that edited the bat renamed the file to recovery.img it didn't work and is a lot of hastle messing around editing any futher tbh
I went here
http://forum.xda-developers.com/showpost.php?p=14013450&postcount=1
tryed to download the "EZboot-Froyo-1.0.tar.md5 - Froyo" file but the links dead and i cant post in the thread.
cant i get file or a kernal and just flash it with odin then get back to normal no?

I finally got it fixed
Hello
I finally found a copy of the I9000XXJPO firmware (the other night) and flashed my phone with it.
the phone was getting stuck on the S slash screen.
But to fix that i flashed it with I9000 dbdata.rfs file (as i had a few E fail errors showing in recovery mode too) and it booted up fine after that.
I'm all up and running again
A Huge Thank's...
To All The Folk & developers, who spend a lot of time on the software, & contributed the guides and files to the forum
Great Work!! :good:
Your's Sincerely
Xai