i tried to repair my bricked galaxy s using odin. Try so many thing but i cannot solve the problem. Then when im using odin i unplugged the cable from the phone when the screen show upgrade logo and now the phone cannot turn on. Please help me.
use jig to reach download mode
Sent from my GT-I9000 using xda premium
Related
Hi
My cousin flashed gingerbread on his gt i9000 with odin, but during the process odin said there is an error and the phone just went dead. Now it wont turn on, or go into download mode with 3 button combo.
1) Is the phone bricked?
2)How can he fix it?
3) Will it go into downloadmode using a jig?
Pleassse Help!!!!!
Might be. Try pulling the battery for a while 15min and then going into download mode if possible.
If not try a jig if available but it likely won't work. After that it's time to send it in under warranty or find a shop that does jtag repairs...
Sent from my GT-I9000M using XDA Premium App
If it doesn't respond to anything i.e. screen always black what ever you do, it propably is dead
Hi, i was trying to flash my Samsung Galaxy S+ (I9001) with Odin (v. 4.43) But it wont go past the verication process, it just gets stuck at it. I've tried anything i could find on google, but nothing works... can someone help me please
Have you tryed leaving battery out for a while then put it back in to flash I think 10min should do
Sent from my GT-I9000 using xda premium
falcon_z said:
Hi, i was trying to flash my Samsung Galaxy S+ (I9001) with Odin (v. 4.43) But it wont go past the verication process, it just gets stuck at it. I've tried anything i could find on google, but nothing works... can someone help me please
Click to expand...
Click to collapse
It's a known issue.. Leave the phone connected to the USB..then remove the battery..unplug..wait some secs..insert the battery..restart Odin.. Connect the USB to the phone and try to reflash..should work now
For me it worked
Sent from my GT-I9001 using Tapatalk
Try this:http://androidadvices.com/samsung-galaxy-gt-i9000-steps-install-gingerbread-236-xwjvx-firmware/
I have none commercial sample of I8190 with unstable firmware and tried to flash I8190XXALL2 Firmware with odin.
I enetered to download mode and start flashing. the process was successful and odin said: Passed but the phonerebooted and doesn't turns on anymore. I tried to connect charger but it doesn't reacts anymore.
Any suggestion?
Wipe data before installation of ROM. Use wipe or paramfiles in this forum before flashing firmware.
Sent from my GT-I8190 using xda premium
Can you boot into download mode?
No unfortunately the phone doesn't turns on.
Sent from my GT-N7100 using xda premium
Have u flashed the right firmware 4 your phone.
Sent from my GT-I8190 using xda premium
Not sure but i think that there is another problem. Odin passed the flashing process successfully but phone doesnt turns on after reboot.
Sent from my GT-N7100 using xda premium
You may have bricked your phone.
Sent from my GT-I8190 using xda premium
You could try first taking out your battery for 5 minutes.
Then press and hold the buttons to enter download mode while putting the battery back to it's place.
Hope it helps you.
Unfortunately this method doesn't helped.
Sent from my GT-N7100 using xda premium
try a JIG in case of soft bricks it should take you to download mod
That is JIG?
at this moment phone cant be powered on. No boot loop or welcome screen. Just no power.
Sent from Samsung Galaxy Note 2
zazabichi said:
That is JIG?
at this moment phone cant be powered on. No boot loop or welcome screen. Just no power.
Sent from Samsung Galaxy Note 2
Click to expand...
Click to collapse
Google for jig make or buy one , its cheap , and try plugging it in - if it works you should be in download mode and can re flash stock via odin.
Else only way left is to jtag by taking it to Samsung service centre
leap before you think
Hi.
My Samsung Galaxy S1 GT-I9000 Problem
By Mistake I've Download In My Phone GT-9003
And Now My Phone Broken Nothing Work
Try To Enter Download Mode And Recovery Mode Never Response
Just Black Screen
And I've Connect My Phone With USB And Try Turn It On
No Response
So What I Have To Do?
Please Help Me
nothing mate, juz UBM, Thats what happen when u flashed wrong ROM. FULL BRICK
Sent from my GT-I9000 using xda premium
my friend gave me his samsung galaxy tab and it seems to have softbricked as soon as you plug it into wallcharger or computer it powers off but if you unplug it it comes on to a screen that says firmware upgrade encountered an issue please select recovery mode in kies
Does sound like a soft brick. Do you know whats on the tab? Stock, cm or kang. Rooted? Hard to suggest a method to fix without knowing the status.
Sent from my SCH-I800 using xda app-developers app