Related
I recently switched from fresh 1.1 to fresh 2.0b and also the new radio flipz came out with. I love it and I cant wait for all the bugs to be out. I do have a kinda serious problem tho and need the advice of a droid/linux guru. Why is my usb connection not working anymore. I tried it on 3 cpus and no recognization. Also I used the dev tools and it says everythings fine. Some other things I have done is wiped->flashed etc. no luck and also installed the drivers. nothin. On a side note it does charge! thanks alot any advice would help!!!
When you say your USB doesn't work, what exactly do you mean? Do you mean that your device is no longer recognized?
If that is the case, try this (also, make sure usb debugging is enabled):
I have win 7 64 and here is what worked for me:
1. Uninstall HTC Driver (this will likely give you an error, you can ignore it)
2. Uninstall HTC Sync
3. Download and install PdaNet
4. Follow the directions when installing PdaNet
Yea basically the phone is connected cia usb cable. by using the app" dev tools" i can tell the phone and computer are communicating with each other but no notification by windows or phone and they will not Activsync, htc sync, or mount. Also if you boot to recovery it will add files. really odd but it seems to be a problem with alot of ppl. Preciate it im trying what u said right now I will post with results.
pjung1 said:
Yea basically the phone is connected cia usb cable. by using the app" dev tools" i can tell the phone and computer are communicating with each other but no notification by windows or phone and they will not Activsync, htc sync, or mount. Also if you boot to recovery it will add files. really odd but it seems to be a problem with alot of ppl. Preciate it im trying what u said right now I will post with results.
Click to expand...
Click to collapse
turn on USB debugging
USB debugging is most definitley on. I double triple check it every time. The uninstallation of htc sync and driver and the install of the pdanet did not work everything was fine until 2.1 and the radio. But I did wipe and reflash a second time
bump still strugglin comin guys someone has to have the answer
well the radio should have NOTHING to do with connecting via usb... try nand-ing back to a 1.5 and see if you can connect through adb again.. my $0.02
I have the same problem and I am using damage 1.0...The problem is that it no longer gives me any options when i plug in to my computer. I have been working on this for a few days, it really sucks cuz i don't have any other roms on my memcard so I am kinda screwed if I can't figure this out...maybe i will just wipe and start over. I am 100% sure this is not related to the radio whatsoever. Does anyone know how to change the default for when u plug into a computer...i have tried just going to settings/connect to pc. Ask me is checked, and disk drive is default. I am wondering if there is a default to clear in apps management.
bee976 said:
I have the same problem and I am using damage 1.0...The problem is that it no longer gives me any options when i plug in to my computer. I have been working on this for a few days, it really sucks cuz i don't have any other roms on my memcard so I am kinda screwed if I can't figure this out...maybe i will just wipe and start over. I am 100% sure this is not related to the radio whatsoever. Does anyone know how to change the default for when u plug into a computer...i have tried just going to settings/connect to pc. Ask me is checked, and disk drive is default. I am wondering if there is a default to clear in apps management.
Click to expand...
Click to collapse
Got it.
Go to Settings > Connect to PC
Choose away
pjung1 said:
I recently switched from fresh 1.1 to fresh 2.0b and also the new radio flipz came out with. I love it and I cant wait for all the bugs to be out. I do have a kinda serious problem tho and need the advice of a droid/linux guru. Why is my usb connection not working anymore. I tried it on 3 cpus and no recognization. Also I used the dev tools and it says everythings fine. Some other things I have done is wiped->flashed etc. no luck and also installed the drivers. nothin. On a side note it does charge! thanks alot any advice would help!!!
Click to expand...
Click to collapse
well if you are using disk drive you need to use usb ports build into the mobo. idk why but any usb that is not built in will give you problems. even on my laptop the usb ports that are plugged into the mobo dont work but the ones built in do. try that.
Avalaunchmods said:
well if you are using disk drive you need to use usb ports build into the mobo. idk why but any usb that is not built in will give you problems. even on my laptop the usb ports that are plugged into the mobo dont work but the ones built in do. try that.
Click to expand...
Click to collapse
I am not sure what u mean by mobo? but it worked on the same usb's when i first flashed, i typically use the exact same usb for everything...i have 4 ports built into my laptop and none of them work for the phone. i even tried reinstalling drivers and htc sync...idk, i just wiped, and then restored and still no go, i guess i will try a wipe w/o restore.
If you're on a desktop, he means plug the cable into the USB ports on the back of the computer chassis. The USB ports there are soldered directly onto the motherboard, where as USB ports on the computer chassis are connected by a cable to the USB headers on the motherboard. What he's saying is that the cable could've been damaged/fried/came loose, so try the ones in the back.
mrinehart93 said:
If you're on a desktop, he means plug the cable into the USB ports on the back of the computer chassis. The USB ports there are soldered directly onto the motherboard, where as USB ports on the computer chassis are connected by a cable to the USB headers on the motherboard. What he's saying is that the cable could've been damaged/fried/came loose, so try the ones in the back.
Click to expand...
Click to collapse
OiC, that isn't the problem I have tried multiple ports on all of my computers(all laptops) as well as multiple cords...idk FML, just reflashed will see if it works.
ok so i just wiped and reflashed, now i am stuck at the X loading screen and the phone is frozen...FML, is it bricked, i can still get into recovery, i have the old fresh 1.1 ROM on my card, should i just flash that, or should i just use the nandroid backup i made from stock?
ok so flashed back to stock and my computer still won't recognize my phone...any other ideas, it has to be the computer right?
bee976 said:
ok so flashed back to stock and my computer still won't recognize my phone...any other ideas, it has to be the computer right?
Click to expand...
Click to collapse
unless your phone won't charge plugged into the wall (meaning it's your phone), then yes.
Did u check with changing the cord ??
I had a similar problem after upgrading radio & fresh 2.0b. I just changed the USB cable and it worked fine. Even now it doesnt yet work with the earlier cable. Something went wrong in that front, but a diff usb cable did the trick for me. try it out
i have changed 5 cords. have messed with every setting known to man after doing so wiped and reflashed. everything i have used every usb port 1.0 and 2.0 and my phone most definitly charges ( my phones never been so charged) i am a comp prog going on my mis degree im pretty good at this and know my stuff Im just wonndering 2 things is it phone or cpu? reason I keep being so indecisive is because comp will recognize a device when it is in heroc but wont verify its a hero( ive tried all drivers) but phone connected fine b4 2.0 i duno im all out of ideas im gonna try to install the new heroc .6 and hope for the best thanks for the input guys!!!
Alright, So I'm looking to help a friend get to the point where they can plug in their Droid 3 and it actually work.
Have plugged into every USB port, have installed the drivers Verizon reccomends installing for the device.
Basically we called up Verizon, and requested to get a actual OEM/Motorla cable. They sent a actual Motorola cable. Still doesn't work.
From what I understand the device has only been detected ONCE, and it was unsuccessful at finding drivers, now when you plug it in it doesn't even try to look for drivers. It just charges. gives you no options to mount or anything.
I've shot in and uninstalled alot of the drivers so it would cause it to re-detect and that attempt was unsuccessful as well. Uninstalled the Motorola driver application and did the same thing over, Uninstalled the USB drivers. Still nothing.
The device does run the most current version of Android, It is running stock. any clues?
perhaps try to manually install the drivers control panel/hardware/devices an printers
Have you checked the actual setting for the usb connection itself? Is it on charge only mode? Try a different computer if you can, if not, see if you can change the setting for when you first plug it into a computer, you should get the options of pc mode, charge only, media sync, and hard disk.
Sent from my DROID3 using XDA App
Jell - I'll shoot in and give that a shot if I can see if I can, Is i'll check for a driver package on the forums I guess see if anyone has one
Josh -- Not sure how to actually set the setting for the usb connection rather then when you plug it in and it asks for you to set it.
You plug it in and it charges, Doesn't ask what mode you want to put it in. Its like you're plugging it into a charger.
I have the same problem with connecting. My phone isn't recognizing that its plugged into a computer, it thinks it is plugged into a wall charger. It would be nice to know if anyone have figure this problem out.
recently i am faceing a lot of problems with the usb of my phone. it charges but doesnt connect to the pc plus it sometimes doesnt charge too i have to switch the phone off to charge it then.
my phone itself is not detecting the usb as when it does it pops up the usb debug icon on the status bar but it is not doing so.
Need help real bad!!
susmit95 said:
recently i am faceing a lot of problems with the usb of my phone. it charges but doesnt connect to the pc plus it sometimes doesnt charge too i have to switch the phone off to charge it then.
my phone itself is not detecting the usb as when it does it pops up the usb debug icon on the status bar but it is not doing so.
Need help real bad!!
Click to expand...
Click to collapse
I've been working with another member on this issue. Go here and read through my suggestions and see if one helps. The first thing I would try, is to uninstall sync manager and all drivers for the phone from your pc. Then, connect the phone and see if it reinstalls sync and the drivers. I hope this helps.
kibmikey1 said:
I've been working with another member on this issue. Go here and read through my suggestions and see if one helps. The first thing I would try, is to uninstall sync manager and all drivers for the phone from your pc. Then, connect the phone and see if it reinstalls sync and the drivers. I hope this helps.
Click to expand...
Click to collapse
yaa i have gone throught ur post a wyle bak. i tried it all. but there is no use. :crying:
I had same prob few days back. My htc one would behave madly. When i accept call automatically speaker gets on. It would not charge either by charger or by usb connection. Usb wouldn't recognize either.
See this psot
http://forum.xda-developers.com/showthread.php?t=2417377
Also see this
http://forums.androidcentral.com/htc-one/290813-htc-one-not-charging-usb-not-recognizing.html
I think is problem is large. After update htc one sucks. no doubt it added some great features. Or it may be hardware prob as always with HTC specially with HTC one X
usb problem
mine has also stopped working. does charge but not connecting to computer . running xp so drivers ok . definitely phone problem as friends htc one connects fine..
Disable usb debugging, it will connect
Sent from my One using xda app-developers app
usb problem
thanks , but tried everything. wont connect in fastboot, recovery or anything. cannot relock bootloader or return to stock so just returning it for warranty as it is with fingers crossed. unless someone can tell me if possible without connecting to pc.
are you using a usb 3.0 port
usb problem
usb 2.0 . i have two friends with htc one's and they both connect just fine.
Same issue here! Last night pulled my phone out and it said "incompatible charger, please use original charger". I wasn't even charging the phone, and now it wont charge or connect to PC unless the phone is off. Tried turning off debug/developer/power save/fastboot/ etc with no luck so far.
Hey all,
Recently I have gotten need to RUU my phone. It has a custom hboot 1.56, S-OFF, and is running CM11. My problem is that my computer will not recognize my phone whatsoever. In fact, it doesn't even show up in Device Manager OR the "Safely Remove Hardware" icon in the task bar. USB Debugging is enabled on my phone, and I am using the adb binary from the RUU package.
What's strange is that Windows doesn't even bring up a message to try and install drivers or anything... it acts as if nothing was ever plugged in. On my phone, nothing happens except it begins charging. Not even a USB storage popup or anything.
I'm not really in a location right now where I can test out another computer to try that, nor do I have a spare cable handy at the moment. Has anyone ever had the problem I've having, and if so, what was causing the problem/fixed the problem? I'm thinking it's the cable, but I'm not really sure since it CAN charge the phone.
Thoughts?
mrinehart93 said:
Hey all,
Recently I have gotten need to RUU my phone. It has a custom hboot 1.56, S-OFF, and is running CM11. My problem is that my computer will not recognize my phone whatsoever. In fact, it doesn't even show up in Device Manager OR the "Safely Remove Hardware" icon in the task bar. USB Debugging is enabled on my phone, and I am using the adb binary from the RUU package.
What's strange is that Windows doesn't even bring up a message to try and install drivers or anything... it acts as if nothing was ever plugged in. On my phone, nothing happens except it begins charging. Not even a USB storage popup or anything.
I'm not really in a location right now where I can test out another computer to try that, nor do I have a spare cable handy at the moment. Has anyone ever had the problem I've having, and if so, what was causing the problem/fixed the problem? I'm thinking it's the cable, but I'm not really sure since it CAN charge the phone.
Thoughts?
Click to expand...
Click to collapse
It's probably the cable. I had to install CM on a Tab 2 for my friend and his cable didn't work, only charged, so I had to get another cable, which worked fine.
StormyNight said:
It's probably the cable. I had to install CM on a Tab 2 for my friend and his cable didn't work, only charged, so I had to get another cable, which worked fine.
Click to expand...
Click to collapse
I ended up trying a friends cable and everything worked perfectly. Time to get a new cable now...
Like in the topic. My pc can't seem to notice my HTC one phone. Not at all.
Some details:
PC - Laptop Lenovo Y580
Operating system - Windows 8.1 64 bit
Android - 5.0.2 I think (Lollipop)
My phone notices the cable (asks for internet tethering etc.) but I don't see it anywhere in pc's Device Manager (neither does HTC Sync Manager).
I've tried numerous things. I installed HTC Sync Manager, I've installed HTC drivers separately, reinstalled generic USB driver and drivers for USB 3.0, changed cable, changed port to another USB 2.0, change to USB 3.0, checked if it works on friend's pc (nope), reinstalled almost any of above mentioned things witt antivirus disabled, with firewall disabled, with almost anything that can be disabled. Nothing. It's not that case of wrong driver. My pc don't see this phone at all.
To be honest I'm tired. Like really tired. I've spent all free time I could find last week trying to somehow make it work. With no effect whatsoever. I don't see even slice of progress (noticing SOMETHING in device manager would be nice). I would love to see some way to analise this. I'm getting closer and closer to just buying new phone. Even though I don't want one, but I can't do any testing with this device.
EDIT: Few things I've remembered about my tries: I've tried both USB debugging on and off, and I've also already done factor reset of the phone - to no effect obviously.
When connected to pc, phone can be charged, but PC doesn't react in any way (no "USB connected", popping up HTC Sync Manager or "Media device connected" info).
I'll appreciate any help. Especially if it manages to change something in my situation.
Best regards,
Hisuu
Hisuu said:
Like in the topic. My pc can't seem to notice my HTC one phone. Not at all.
Some details:
PC - Laptop Lenovo Y580
Operating system - Windows 8.1 64 bit
Android - 5.0.2 I think (Lollipop)
My phone notices the cable (asks for internet tethering etc.) but I don't see it anywhere in pc's Device Manager (neither does HTC Sync Manager).
I've tried numerous things. I installed HTC Sync Manager, I've installed HTC drivers separately, reinstalled generic USB driver and drivers for USB 3.0, changed cable, changed port to another USB 2.0, change to USB 3.0, checked if it works on friend's pc (nope), reinstalled almost any of above mentioned things witt antivirus disabled, with firewall disabled, with almost anything that can be disabled. Nothing. It's not that case of wrong driver. My pc don't see this phone at all.
To be honest I'm tired. Like really tired. I've spent all free time I could find last week trying to somehow make it work. With no effect whatsoever. I don't see even slice of progress (noticing SOMETHING in device manager would be nice). I would love to see some way to analise this. I'm getting closer and closer to just buying new phone. Even though I don't want one, but I can't do any testing with this device.
I'll appreciate any help. Especially if it manages to change something in my situation.
Best regards,
Hisuu
Click to expand...
Click to collapse
When you plug in your phone to the computer do you get the following:
USB Connected
HTC Sync Manager
Media device [MTP] connected
Can you charge your phone while connected to the computer or do you have to use the wall charger to charge your phone? If you don't see the programs listed above, it sounds like a hardware issue with the USB port on your phone.
@majmoz
When you plug in your phone to the computer do you get the following:
USB Connected
HTC Sync Manager
Media device [MTP] connected
Click to expand...
Click to collapse
No, no and no. My pc seems to not react with anything (neither did friend's pc).
Can you charge your phone while connected to the computer or do you have to use the wall charger to charge your phone? If you don't see the programs listed above, it sounds like a hardware issue with the USB port on your phone.
Click to expand...
Click to collapse
Yes, I can charge phone when connected to PC.
And as I mentioned phone actually notices it's connected to something, and asks what mode to enter (USB tethering, smart network sharing etc.). But it also seems... kinda dodgy. Sometimes phone doesn't react, I have to reconnect or even restart it. Sometimes "USB connected, Tap to change settings" stays... even after I have already disconnected it .
Few things I've remembered about my tries: I've tried both USB debugging on and off, and I've also already done factor reset of the phone - to no effect obviously. (I'll add this info to 1st post to gather info in one place).
Any other ideas?
This topic is my last resort, because I'm out of ideas and start leaning to buying new phone just for testing purposes (either Samsung Galaxy S3 or Nexus4 I guess).
Hisuu said:
Any other ideas?
This topic is my last resort, because I'm out of ideas and start leaning to buying new phone just for testing purposes (either Samsung Galaxy S3 or Nexus4 I guess).
Click to expand...
Click to collapse
start from scratch: Uninstall HTC sync and all the drivers you have tried. Then install HTC drivers only (not the generic drivers) or install HTC sync and uninstall it but keep the drivers installed (the idea is to have the driver installed but not HTC Sync, we don't want Sync to interact with the phone).
Try another USB cable but make sure its Data enabled (not only a charging cable). Some cheap cables are for charging only, no data connection.
Try another USB port, use 2.0 usb ports, do not use any external usb hub, use th eport directly on your motherboard (at the back of your computer).
Try with another computer
Clean your phone usb port using a cotton swab with some isotropic alcohol and then apply (spray) a light coat of electrical enhancer on your usb port (see your local electronic supplier or even some hardware stores)
alray said:
start from scratch: Uninstall HTC sync and all the drivers you have tried. Then install HTC drivers only (not the generic drivers) or install HTC sync and uninstall it but keep the drivers installed (the idea is to have the driver installed but not HTC Sync, we don't want Sync to interact with the phone).
Try another USB cable but make sure its Data enabled (not only a charging cable). Some cheap cables are for charging only, no data connection.
Try another USB port, use 2.0 usb ports, do not use any external usb hub, use th eport directly on your motherboard (at the back of your computer).
Try with another computer
Clean your phone usb port using a cotton swab with some isotropic alcohol and then apply (spray) a light coat of electrical enhancer on your usb port (see your local electronic supplier or even some hardware stores)
Click to expand...
Click to collapse
Tried other cables (data enabled, they were from different phones), as well as different USB ports (both 2.0 and 3.0). Also tried another pc (no luck).
Uninstalled HTC Sync and drivers so many times I can't count it ;]
I'll try to clean the port and maybe use motherboard on friend's pc (on his machine I've only used front panel). Hopefully something works. Thanks for your input, I appreciate it.