Gentlemen, Bricked Galaxy Advance.
situation:
Downloading mode: Yes, ODIN recognizes.
Recovery Mode: No. See a bizarre Screen "buggy"
Attempting to flash:
STOCK ROMS: Various.
Error displayed:
<ID:0/005> NAND Write Start!
<ID:0/005> hidden.img.md5
<ID:0/005> kernel2.bin.md5
<ID:0/005> kernel.bin.md5
<ID:0/005> modem.bin.md5
<ID:0/005>
<ID:0/005> Complete (Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Attempt to Downgrade:
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I got flash stock kernel (From LQ4 ROM) and PASSED.
But the situation remains as shown.
Is there any way of flashing any other kernel or CWM/TWRP using ODIN?
I believe that is the only chance now.
I need to recover RECOVERY Stock or not to try to flash something for him.
Thanks for any help you can give me.
NOTE: I've tried changing ports, reinstall SAMSUNG Drivers, and all other common solutions.
Now I need an expert. Or experienced in this type of situation.
Here is a stock JB kernel thanks to shut_down, use odin 1.85 to install. Put this in the pda of odin making sure only reboot and f.reset time are checked, nothing else other than pda. it has saved my azz a few times, hope it helps for your situation. good luck
StockJBKernel
ADR USR said:
Gentlemen, Bricked Galaxy Advance.
situation:
Downloading mode: Yes, ODIN recognizes.
Recovery Mode: No. See a bizarre Screen "buggy"
Attempting to flash:
STOCK ROMS: Various.
Error displayed:
<ID:0/005> NAND Write Start!
<ID:0/005> hidden.img.md5
<ID:0/005> kernel2.bin.md5
<ID:0/005> kernel.bin.md5
<ID:0/005> modem.bin.md5
<ID:0/005>
<ID:0/005> Complete (Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Attempt to Downgrade:
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I got flash stock kernel (From LQ4 ROM) and PASSED.
But the situation remains as shown.
Is there any way of flashing any other kernel or CWM/TWRP using ODIN?
I believe that is the only chance now.
I need to recover RECOVERY Stock or not to try to flash something for him.
Thanks for any help you can give me.
NOTE: I've tried changing ports, reinstall SAMSUNG Drivers, and all other common solutions.
Now I need an expert. Or experienced in this type of situation.
Click to expand...
Click to collapse
Recovery Mode: No. See a bizarre Screen "buggy"
Like TV with no signal?
bobfrantic said:
Here is a stock JB kernel thanks to shut_down, use odin 1.85 to install. Put this in the pda of odin making sure only reboot and f.reset time are checked, nothing else other than pda. it has saved my azz a few times, hope it helps for your situation. good luck
StockJBKernel
Click to expand...
Click to collapse
Thank you. I'll try this too.
shut_down said:
Recovery Mode: No. See a bizarre Screen "buggy"
Like TV with no signal?
Click to expand...
Click to collapse
exact.
ADR USR said:
exact.
Click to expand...
Click to collapse
I had same problem. Couldn't get it fixed by myself, tried to restore backup, to flash firmware... At the end I zook it to service, and got it fixed. Did not go for warranty because I had binary counter at 4. It cost me about 20 $.
P.S. Instead of Samsung logo i was getting that no-signal TV image.
Послато са GT-I9070 користећи Тапаток 2
shut_down said:
I had same problem. Couldn't get it fixed by myself, tried to restore backup, to flash firmware... At the end I zook it to service, and got it fixed. Did not go for warranty because I had binary counter at 4. It cost me about 20 $.
P.S. Instead of Samsung logo i was getting that no-signal TV image.
Послато са GT-I9070 користећи Тапаток 2
Click to expand...
Click to collapse
Bad news.
I will not waste my time then.
Well, I'll try a bit more before giving up.
why does this happen?
Odin can not write anymore?
I got flashing a kernel. No WRITE ERROR. But did not give any result.
ADR USR said:
Bad news.
I will not waste my time then.
Well, I'll try a bit more before giving up.
What do you think that is?
Click to expand...
Click to collapse
Try with JB firmware couple times. Didn't figure out what was it. Recovery said some problem with csc. Try with guide for downgrading from JB to GB too.
And to me it just started without any reason. I restored a backup from twrp, booted. Rebooted and got bootloop, tried to restore backup again and after that got that messy screen...
Послато са GT-I9070 користећи Тапаток 2
shut_down said:
Try with JB firmware couple times. Didn't figure out what was it. Recovery said some problem with csc. Try with guide for downgrading from JB to GB too.
And to me it just started without any reason. I restored a backup from twrp, booted. Rebooted and got bootloop, tried to restore backup again and after that got that messy screen...
Послато са GT-I9070 користећи Тапаток 2
Click to expand...
Click to collapse
I've tried these things. MAs'll try some more.
Give news (good or bad) later.
Thank you guys.
ADR USR said:
I've tried these things. MAs'll try some more.
Give news (good or bad) later.
Thank you guys.
Click to expand...
Click to collapse
Make latest cocore kernel odin flashable and flash it, then you should have recovery
Sent from my GT-I9070 using xda app-developers app
frapeti said:
Make latest cocore kernel odin flashable and flash it, then you should have recovery
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
HOW? There is a 6.2 cocore flasheable with ODIN?
If not ... How Do I?
ADR USR said:
HOW? There is a 6.2 cocore flasheable with ODIN?
If not ... How Do I?
Click to expand...
Click to collapse
Try this, if it works.
http://d-h.st/2qS
Were you able to fix this? Im having the same exact issue and i have tried, not everything, but def a lot!
Any input would be greatly appreciated
The solution was to send for warranty service.
No problems even with the counter changed.
ADR USR said:
The solution was to send for warranty service.
No problems even with the counter changed.
Click to expand...
Click to collapse
did they change the mobo?..
Related
i want too root my phone! i just flashed the stock ICS ROM in Odin Pc.
i tried this - Make sure your SGN is NOT connected to your computer
- Reboot your SGN into "download mode" (Vol down + Home + Power))
- Start ODIN
- Click the PDA button, and select the "SGN_XX_OXA_KJ1_FACTORYFS.tar" file
- Connect the SGN to your computer
- Make sure "repartition" is NOT checked
- Click the START button
- Wait for the phone to reboot TWICE
- Done.
Now you have your device Rooted, Install Mobile Odin Pro n update your device to any new ROM with Mobile Odin.
but it didnt work. anyone knows the best way getting an ics stock rom rooted?
AleksLenin said:
i want too root my phone! i just flashed the stock ICS ROM in Odin Pc.
i tried this - Make sure your SGN is NOT connected to your computer
- Reboot your SGN into "download mode" (Vol down + Home + Power))
- Start ODIN
- Click the PDA button, and select the "SGN_XX_OXA_KJ1_FACTORYFS.tar" file
- Connect the SGN to your computer
- Make sure "repartition" is NOT checked
- Click the START button
- Wait for the phone to reboot TWICE
- Done.
Now you have your device Rooted, Install Mobile Odin Pro n update your device to any new ROM with Mobile Odin.
but it didnt work. anyone knows the best way getting an ics stock rom rooted?
Click to expand...
Click to collapse
Either you flashed stock ICS, flashed that KJ1 file in odin, and you went back to Gingerbread (in that case, what happened? were you able to boot up? cause of different bootloaders) or you did NOT flash stock ICS and that file you flashed (KJ1) is an already, very old stock Gingerbread rom.
In any case, http://forum.xda-developers.com/showthread.php?t=1646270
re:
dr. xp55 said:
Either you flashed stock ICS, flashed that KJ1 file in odin, and you went back to Gingerbread (in that case, what happened? were you able to boot up? cause of different bootloaders) or you did NOT flash stock ICS and that file you flashed (KJ1) is an already, very old stock Gingerbread rom.
In any case, http://forum.xda-developers.com/showthread.php?t=1646270
Click to expand...
Click to collapse
i flashed stock ICS, flashed KJ1 in odin then I got problems on the boot up, cause of different bootloaders, android chrashed every time I tried to press the android man? i did an full wipe and now i back on stock ICS trying to root again...
i flashed stock ics as well but i want to know if is safe to flash back to GB to root?
AleksLenin said:
i flashed stock ICS, flashed KJ1 in odin then I got problems on the boot up, cause of different bootloaders, android chrashed every time I tried to press the android man? i did an full wipe and now i back on stock ICS trying to root again...
Click to expand...
Click to collapse
You can flash CF-Root kernel with PC Odin but that will increase your flash counter..
Download the prerooted ICS ROM from this thread and flash it with PC Odin..
You'll have ICS ROM with root after flash
nightfox11 said:
i flashed stock ics as well but i want to know if is safe to flash back to GB to root?
Click to expand...
Click to collapse
See me reply to gain root in ICS without going back to GB
matius44 said:
You can flash CF-Root kernel with PC Odin but that will increase your flash counter..
Download the prerooted ICS ROM from this thread and flash it with PC Odin..
You'll have ICS ROM with root after flash
Click to expand...
Click to collapse
I'd like to say thanks, haha, I did not see that earlier. Unfortunately, I ran out of thanks for the day
dr. xp55 said:
I'd like to say thanks, haha, I did not see that earlier. Unfortunately, I ran out of thanks for the day
Click to expand...
Click to collapse
No worries, be proud you're trying your best to help and we all make mistakes
i flashed my phone with odin but my screeen won't turn on?!
i hear sound etc but screen stays black?
what can i do?
lol4it said:
i flashed my phone with odin but my screeen won't turn on?!
i hear sound etc but screen stays black?
what can i do?
Click to expand...
Click to collapse
Did you try a reflash?
matius44 said:
You can flash CF-Root kernel with PC Odin but that will increase your flash counter..
Download the prerooted ICS ROM from this thread and flash it with PC Odin..
You'll have ICS ROM with root after flash
i did flash with pre rooted rom however no root access mobile odin cant work because of this any ideas
Click to expand...
Click to collapse
anubis1126 said:
matius44 said:
You can flash CF-Root kernel with PC Odin but that will increase your flash counter..
Download the prerooted ICS ROM from this thread and flash it with PC Odin..
You'll have ICS ROM with root after flash
i did flash with pre rooted rom however no root access mobile odin cant work because of this any ideas
Click to expand...
Click to collapse
Are you sure you got the prerooted ROM? It's reported that it works..
You can get the CF-Root kernel from Chainfire's thread and flash it using "already rooted.bat" method described in post #2 of said thread..
If that did not work then your only way is Gingerbread, root it, flash ICS with Mobile Odin and keeping root
Click to expand...
Click to collapse
matius44 said:
Did you try a reflash?
Click to expand...
Click to collapse
yes i've tried 3 times with 2 differents roms
EDIT:
dat happens:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.img
<ID:0/003> NAND Write Start!!
<ID:0/003> factoryfs.img
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> zImage
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/005> Added!!
reflashed with the prerooted but no root access
lol4it said:
yes i've tried 3 times with 2 differents roms
EDIT:
dat happens:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.img
<ID:0/003> NAND Write Start!!
<ID:0/003> factoryfs.img
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> zImage
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/005> Added!!
Click to expand...
Click to collapse
I have no idea why your screen is black, sorry..
Try to get a pit file for the 16GB Note and do repartition?
anubis1126 said:
reflashed with the prerooted but no root access
Click to expand...
Click to collapse
Then your only way is to flash directly rootable Gingerbread ROM and start from there, sorry..
where can i get a pit file??
lol4it said:
where can i get a pit file??
Click to expand...
Click to collapse
Search dr.ketan thread..use at your own risk..
matius44 said:
Search dr.ketan thread..use at your own risk..
Click to expand...
Click to collapse
anyways it doen't work now so can it be any worse using odin?
lol4it said:
anyways it doen't work now so can it be any worse using odin?
Click to expand...
Click to collapse
yes use PC Odin, flash the ROM and check if it solved..try couple of reboots also
matius44 said:
yes use PC Odin, flash the ROM and check if it solved..try couple of reboots also
Click to expand...
Click to collapse
his post is so complicated Oo
can u tell me what to download?
lol4it said:
his post is so complicated Oo
can u tell me what to download?
Click to expand...
Click to collapse
Sorry I did not do repartition before and I do not want to be responsible for any possible bricks..you can ask dr.ketan he knows about Odin better than me
It basicially got stuck at Odin while trying to update to Jelly Bean, then I took out the battery & now keeps appearing "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Also can't factory reset as well as it to detect at Kies. Only place I can access is Odin currently.
This what happens every time in Odin both before & now.
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> data.img
<ID:0/003> factoryfs.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Can anyone help please?
Thanks
Install drivers on your pc
Sent from my GT-N7000 using Tapatalk 2
abhinav quietly brilliant said:
Install drivers on your pc
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Which drivers?
How many time you try Flashing it???...
These drivers
For x64 http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x64.shtml
For x86 http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x86.shtml
Sent from my GT-N7000 using Tapatalk 2
IzoKuro said:
It basicially got stuck at Odin while trying to update to Jelly Bean, then I took out the battery & now keeps appearing "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Also can't factory reset as well as it to detect at Kies. Only place I can access is Odin currently.
This what happens every time in Odin both before & now.
Can anyone help please?
Thanks
Click to expand...
Click to collapse
you may have to repartition.. read this..
http://forum.xda-developers.com/showthread.php?t=1667886
stuck at factoryfs.img is a symptom of emmc brick..
your phone might encountered lock up some sectors on your internal storage.. so repartitioning might be a consideration..
Okay, so far I've flashed a eMMC Safe Kernel via Odin and now able to go to recovery mode.
It now shows model number display with the yellow triangle sign showing & can't go further than that.
Any idea what to do next?
IzoKuro said:
Okay, so far I've flashed a eMMC Safe Kernel via Odin and now able to go to recovery mode.
It now shows model number display with the yellow triangle sign showing & can't go further than that.
Any idea what to do next?
Click to expand...
Click to collapse
If it Driver problem PC Odin will not detect you phone...
now you can go to stock recovery or what?...try flash Philz kernel using PC Odin.. if done, boot to recovery and flash any custom Rom...if no luck i'm sure your phone already hard brick/super bricked....
check out this method to revive bricked phone...PIT file method to revive your phone from a MMC_CAP_ERASE brick
Now you have safe kernel then boot into recovery do all the wipes and then boot into download mode and then try flashing the rom from pc odin
Sent from my GT-N7000 using Tapatalk 2
It seems that the only thing that is stopping me from getting a full recovery is now the eMMC...working on it atm.
abhinav quietly brilliant said:
Now you have safe kernel then boot into recovery do all the wipes and then boot into download mode and then try flashing the rom from pc odin
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Hey guys,
I've been working with IzoKuro in trying to figure out how to sort out this phone, We have sorted out everything as Izo has said but now as he has said we are having trouble flashing the custom rom I've tried to do it via recovery mode and it comes up with this:
E:Error in /emmc/CUSTOM ROM.zip
(Status:7)
Installation aborted.
Click to expand...
Click to collapse
I've tried it with a stock ROM as well and that isn't any better.
For that it comes up with:
E:Can't open /emmc/CUSTOM ROM.zip
(Bad)
Installation aborted.
Click to expand...
Click to collapse
So can someone let me know what option on PC Odin that we have to use to flash that rom.
Thanks,
Nippon
What recovery?..stock or what?..give more detail..
What kernel do you flash before?
What custom rom that you try to flash on recovery?
How many time you flash on PC Odin and stuck on factoryfs.img?
What rom your on before you flash using Odin in the 1st place?
Did you make a wipe on stock ICS kernel/recovery?
Sent from my GT-N7000 using Tapatalk HD
It's possible that the zip you have downloaded is bad so download a fresh new copy and as you said you want flash a custom rom! Is that rom a cyanogen based rom? If yes then download cm kernel and flash it in recovery then install the custom rom
Sent from my GT-N7000 using Tapatalk 2
Hello everyone! I hope you're all doing great. I am a new user to this site. I hope this is the right place to get assistance, because my case is different than everyone else
I have a GT-N7000, and it's in a bootloop. I can access both recovery and download modes. But when I try to wipe data in recovery, it gets stuck. And when I try to flash a rom, it also gets stuck. I tried flashing stock firmware via Odin. I have tried a lot of firmwares (GB, ICS, and JB). The flashing process gets stuck. I have tried everything I could. If you can provide me with a solution for how to get out of this ordeal, I would really appreciate it so much.
Thank you in advance !
Sam322 said:
Hello everyone! I hope you're all doing great. I am a new user to this site. I hope this is the right place to get assistance, because my case is different than everyone else
I have a GT-N7000, and it's in a bootloop. I can access both recovery and download modes. But when I try to wipe data in recovery, it gets stuck. And when I try to flash a rom, it also gets stuck. I tried flashing stock firmware via Odin. I have tried a lot of firmwares (GB, ICS, and JB). The flashing process gets stuck. I have tried everything I could. If you can provide me with a solution for how to get out of this ordeal, I would really appreciate it so much.
Thank you in advance !
Click to expand...
Click to collapse
Where does it gets stuck? From what I read I am afraid it is an emmc superbrick. But I cant judge because I dont know where it gets stuck..
Sent from my Galaxy Nexus using XDA Premium HD app
What recovery do you have?
mrgnex said:
Where does it gets stuck? From what I read I am afraid it is an emmc superbrick. But I cant judge because I dont know where it gets stuck..
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
Here is the odin log while flashing GB firmware.
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection
<ID:0/005> Initialization
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> factoryfs.img
It is stuck right here.
Hi all,
I am getting mad after several hours trying to just install CWM in the GT-7000.
I root it using the farmaroot and it was smooth.
after I tried the easy way of rom manager... and it didnt work.
I even download myself the Philz CMW 6
http://forum.xda-developers.com/showthread.php?t=1901191
philz_touch_6.07.9-n7000.tar.md5
I start the phone volume down - power-home , click volume up to enter into the downloading mode
run Odin 3.09 getting after install the samsung drivers... I get COM9 (light blue?)
I select the md5 file with the AP and click start and this is the output
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> recovery.img
<ID:0/009> NAND Write Start!!
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
really I dont know what else to try on...any idea??
thanks in advance.
jose
jacortijo said:
Hi all,
I am getting mad after several hours trying to just install CWM in the GT-7000.
I root it using the farmaroot and it was smooth.
after I tried the easy way of rom manager... and it didnt work.
I even download myself the Philz CMW 6
http://forum.xda-developers.com/showthread.php?t=1901191
philz_touch_6.07.9-n7000.tar.md5
I start the phone volume down - power-home , click volume up to enter into the downloading mode
run Odin 3.09 getting after install the samsung drivers... I get COM9 (light blue?)
I select the md5 file with the AP and click start and this is the output
really I dont know what else to try on...any idea??
thanks in advance.
jose
Click to expand...
Click to collapse
You can try to flash philz kernel from here http://forum.xda-developers.com/showthread.php?t=1901191
This time try .zip file and flash from stock recovery
Sent from my GT-N7000 using Tapatalk
Where did you select the file in Odin? What's AP?
treacherous_hawk said:
You can try to flash philz kernel from here http://forum.xda-developers.com/showthread.php?t=1901191
This time try .zip file and flash from stock recovery
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
I finally managed to install using an old Odin version 1.84 a whole custom ROM with the cwm included. Then I could boot into recovery and install the cyanogenmod custom ROM that I wanted.
Thanks a lot anyway,
Hi jacortijo plus help me out how you did that because I'm feeling same to install kitkat rom in my note 1n7000 plus help me out I have rooted my phone nd I'm using jellybean rom
I want to install philztouchrecovery to install kitkat rom but I'm not able to do that so old help me out
Hey, so i tried rooting my galaxy tab s2 810, i tried flashing a custom kernel, and then used an autoroot. it didn't seem like it was working, and now im afraid that i have gotten myself in more trouble that i thought was possible.. when i try to boot my device it stays on the boot screen saying either '' Kernel is not seandroid enforcing'' or ''recovery is not seandroid enforcing''. i cannot enter the recovery menu by pressing Power+home+vol up.
however i can enter the download section...
i have tried a bunc of different fixes, and i dont know if all i did was make my problem worse... i could really use some help.
Try flashing the newest stock ROM over ODIN 5.1.1_XAC-T810XXU2BOJ1-20151102191344.zip
And start over from the beginning, take the right files ( android 5.1.1)
I've tried but it wont flash it for some reason it keeps failing
At which step exactly? What ist the output in ODIN?
Gesendet von meinem Nexus 5X mit Tapatalk
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> boot.img
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
No need to create 3 threads on the same subject.
http://forum.xda-developers.com/showpost.php?p=64748665&postcount=98
Which android version was your tablet running and what region is it from?
I think u are trying to downgrade your bootloader. Do you really have the latest Stock rom ? Take the one i posted above.
Gesendet von meinem Nexus 5X mit Tapatalk
ashyx said:
No need to create 3 threads on the same subject.
http://forum.xda-developers.com/showpost.php?p=64748665&postcount=98
Which android version was your tablet running and what region is it from?
Click to expand...
Click to collapse
woops, got kind of desperate there.. its 5.1.1 and i bought it in the US
ashyx said:
No need to create 3 threads on the same subject.
http://forum.xda-developers.com/showpost.php?p=64748665&postcount=98
Which android version was your tablet running and what region is it from?
Click to expand...
Click to collapse
I have also flashed the twrp with succes. i could get into the custom recovery, so i tried to wipe it from there and nothing happened.... when i try to boot my device from twrc is says ''no os installed''
no stock ROM that i have tried has been able to flash
jever55 said:
I have also flashed the twrp with succes. i could get into the custom recovery, so i tried to wipe it from there and nothing happened.... when i try to boot my device from twrc is says ''no os installed''
no stock ROM that i have tried has been able to flash
Click to expand...
Click to collapse
OK so your half way there.
Did you try flashing the rom westernmg posted? That is the one you should be flashing.
Also quit with the random wiping before you go making things worse. Wipe is rarely needed except for the data partition.
If that doesn't work there is a custom rom by BigBot96 for the t810 in the development section. Flash that with twrp and you should be up and running again.
ashyx said:
OK so your half way there.
Did you try flashing the rom westernmg posted? That is the one you should be flashing.
If that doesn't work there is a custom rom for the t810 in the development section. Flash that with twrp and you should be up and running again.
Click to expand...
Click to collapse
i have tried the ROM he posted but with no succes... im not quite sure how to flash anything with twrp
jever55 said:
i have tried the ROM he posted but with no succes... im not quite sure how to flash anything with twrp
Click to expand...
Click to collapse
Read the post or Google.
ashyx said:
Read the post or Google.
Click to expand...
Click to collapse
thank you, but he wants me to flash a firmware package over ODIN, in order too do the flash via Twrp right ? i have attempted that flash and failed...
Maybe you have killed your OS while wiping it in TWRP and not flashing a new system.
Thats why i told you to flash a fresh stock ROM with ODIN.
You can also try flashing CM12.1 over TWRP...
jever55 said:
thank you, but he wants me to flash a firmware package over ODIN, in order too do the flash via Twrp right ? i have attempted that flash and failed...
Click to expand...
Click to collapse
What do you mean you've flashed with TWRP, what did you flash?