[Q] Imposible to install CWM in GT7000 4.1.2 - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Hi all,
I am getting mad after several hours trying to just install CWM in the GT-7000.
I root it using the farmaroot and it was smooth.
after I tried the easy way of rom manager... and it didnt work.
I even download myself the Philz CMW 6
http://forum.xda-developers.com/showthread.php?t=1901191
philz_touch_6.07.9-n7000.tar.md5
I start the phone volume down - power-home , click volume up to enter into the downloading mode
run Odin 3.09 getting after install the samsung drivers... I get COM9 (light blue?)
I select the md5 file with the AP and click start and this is the output
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> recovery.img
<ID:0/009> NAND Write Start!!
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
really I dont know what else to try on...any idea??
thanks in advance.
jose

jacortijo said:
Hi all,
I am getting mad after several hours trying to just install CWM in the GT-7000.
I root it using the farmaroot and it was smooth.
after I tried the easy way of rom manager... and it didnt work.
I even download myself the Philz CMW 6
http://forum.xda-developers.com/showthread.php?t=1901191
philz_touch_6.07.9-n7000.tar.md5
I start the phone volume down - power-home , click volume up to enter into the downloading mode
run Odin 3.09 getting after install the samsung drivers... I get COM9 (light blue?)
I select the md5 file with the AP and click start and this is the output
really I dont know what else to try on...any idea??
thanks in advance.
jose
Click to expand...
Click to collapse
You can try to flash philz kernel from here http://forum.xda-developers.com/showthread.php?t=1901191
This time try .zip file and flash from stock recovery
Sent from my GT-N7000 using Tapatalk

Where did you select the file in Odin? What's AP?

treacherous_hawk said:
You can try to flash philz kernel from here http://forum.xda-developers.com/showthread.php?t=1901191
This time try .zip file and flash from stock recovery
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
I finally managed to install using an old Odin version 1.84 a whole custom ROM with the cwm included. Then I could boot into recovery and install the cyanogenmod custom ROM that I wanted.
Thanks a lot anyway,

Hi jacortijo plus help me out how you did that because I'm feeling same to install kitkat rom in my note 1n7000 plus help me out I have rooted my phone nd I'm using jellybean rom
I want to install philztouchrecovery to install kitkat rom but I'm not able to do that so old help me out

Related

bricked note

For people who are bricked but still get in too download mode.
Flash this abyss 3.9 tar with odin pc and you have redpill. Many people got there backup restored with redpiil.
new tar file. Unzip and flash tar with odin.
Thanks chrisx
http://db.tt/wI2MU3q0
what if there is no nand backup can we flash a custom rom via cwm
brockyneo said:
what if there is no nand backup can we flash a custom rom via cwm
Click to expand...
Click to collapse
If it works, you certainly can. I emphasize 'if it works'.
chasmodo said:
If it works, you certainly can.
Click to expand...
Click to collapse
You also can flash a rom. Best a ics rom. Normale recovery will not work so thats why i made a tar abyss with redpill.
robertberma said:
You also can flash a rom. Best a ics rom. Normale recovery will not work so thats why i made a tar abyss with redpill.
Click to expand...
Click to collapse
hi why a ics rom
brockyneo said:
hi why a ics rom
Click to expand...
Click to collapse
Because you can not flash gb over ics. When restored ics you flash gb with odin.
Unable to install through odin, stuck on
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
My CWM is working can you upload CWM version So I can try...
robertberma said:
Because you can not flash gb over ics. When restored ics you flash gb with odin.
Click to expand...
Click to collapse
my cwm is gone already and download mode is working. going to try your kernel thru odin now mate. i was on aosp 4.0.3 earlier, and thanks to angelom im in a mess.
but anyway, i dont have a nandroid backup, so if i am able to successfully flash kernel via odin, whts the next step i should do mate?
androidindian said:
and thanks to angelom im in a mess.
Click to expand...
Click to collapse
The only one you can blame is yourself as you didn't have to or needed to install his kernel. As always.
I did not use that kernel as I didn't have the need too... it added nothing directly usefully.
| GalaxyNote ICS | Tapatalk |
hakimkkb4u said:
Unable to install through odin, stuck on
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
My CWM is working can you upload CWM version So I can try...
Click to expand...
Click to collapse
I am having the same issue as well. stuck in zimage and no progress bar in odin.
i dont have cwm access. it says firmware upgrade error , try recovery thru kies when i try to go into cwm. please help bro
If my tar does not work. Angelom is going to post a correct odin 3.9 kernel. Please wait.
androidindian said:
I am having the same issue as well. stuck in zimage and no progress bar in odin.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
i dont have cwm access. it says firmware upgrade error , try recovery thru kies when i try to go into cwm. please help bro
Click to expand...
Click to collapse
please help bro
I can get to cwm I am going too install abys3.9 and do nand back up but my nand is on my ex sd . Will it be OK to copy it to sd in case it doesn'trecognize my ex sd thx
Sent from my GT-N7000 using xda premium
Ok hope this will work. This kernel is odin but not for ower device. It wiil give you recovery back i hope and than flash redpill kernel. Long shot but try. Make sure you have redpill on sd.
http://www.theandroidsoul.com/root-xxjvs/
Not working for me...
I installed it via CWM...
try to do Restore
able to restore boot image and system...
but unable to restore data, getting following errors...
Error while restoring/data!
I think may be the problem is with data partition...
hakimkkb4u said:
I installed it via CWM...
try to do Restore
able to restore boot image and system...
but unable to restore data, getting following errors...
Error while restoring/data!
I think may be the problem is with data partition...
Click to expand...
Click to collapse
With redpill?
robertberma said:
Ok hope this will work. This kernel is odin but not for ower device. It wiil give you recovery back i hope and than flash redpill kernel. Long shot but try. Make sure you have redpill on sd.
http://www.theandroidsoul.com/root-xxjvs/
Click to expand...
Click to collapse
i just took jamies help, on this: http://forum.xda-developers.com/showpost.php?p=23241667&postcount=2140
and got back my cwm thru this cf kernel bro. using tar!
tHX Robert but your *.tar is not right.
I build a *.tar.md5 for Odin (PC)
Pls note, first you MUST extract this *.zip! XDA does not allow the upload of *.tar.md5 files!
Then you will have a *.tar.md5.
Pls flash this file with Odin!
Here we go...
(Pls add this file to your first post)
Chris X. said:
tHX Robert but your *.tar is not right.
I build a *.tar.md5 for Odin (PC)
Pls note, first you MUST extract this *.zip! XDA does not allow the upload of *.tar.md5 files!
Then you will have a *.tar.md5.
Pls flash this file with Odin!
Here we go...
(Pls add this file to your first post)
Click to expand...
Click to collapse
chris, thank you so much!
i just flash cf kernel i9220 via odin and got back cwm. should i flash this via odin and get abyss recovery .. i dont have a nandroid backup. so can i install a custom rom gb after that?
androidindian said:
chris, thank you so much!
i just flash cf kernel i9220 via odin and got back cwm. should i flash this via odin and get abyss recovery .. i dont have a nandroid backup. so can i install a custom rom gb after that?
Click to expand...
Click to collapse
I know that, unfortunately, not yet.
I'll test it.
Greets

[Q] how to root an SGN after flashing stock ICS with odin pc

i want too root my phone! i just flashed the stock ICS ROM in Odin Pc.
i tried this - Make sure your SGN is NOT connected to your computer
- Reboot your SGN into "download mode" (Vol down + Home + Power))
- Start ODIN
- Click the PDA button, and select the "SGN_XX_OXA_KJ1_FACTORYFS.tar" file
- Connect the SGN to your computer
- Make sure "repartition" is NOT checked
- Click the START button
- Wait for the phone to reboot TWICE
- Done.
Now you have your device Rooted, Install Mobile Odin Pro n update your device to any new ROM with Mobile Odin.
but it didnt work. anyone knows the best way getting an ics stock rom rooted?
AleksLenin said:
i want too root my phone! i just flashed the stock ICS ROM in Odin Pc.
i tried this - Make sure your SGN is NOT connected to your computer
- Reboot your SGN into "download mode" (Vol down + Home + Power))
- Start ODIN
- Click the PDA button, and select the "SGN_XX_OXA_KJ1_FACTORYFS.tar" file
- Connect the SGN to your computer
- Make sure "repartition" is NOT checked
- Click the START button
- Wait for the phone to reboot TWICE
- Done.
Now you have your device Rooted, Install Mobile Odin Pro n update your device to any new ROM with Mobile Odin.
but it didnt work. anyone knows the best way getting an ics stock rom rooted?
Click to expand...
Click to collapse
Either you flashed stock ICS, flashed that KJ1 file in odin, and you went back to Gingerbread (in that case, what happened? were you able to boot up? cause of different bootloaders) or you did NOT flash stock ICS and that file you flashed (KJ1) is an already, very old stock Gingerbread rom.
In any case, http://forum.xda-developers.com/showthread.php?t=1646270
re:
dr. xp55 said:
Either you flashed stock ICS, flashed that KJ1 file in odin, and you went back to Gingerbread (in that case, what happened? were you able to boot up? cause of different bootloaders) or you did NOT flash stock ICS and that file you flashed (KJ1) is an already, very old stock Gingerbread rom.
In any case, http://forum.xda-developers.com/showthread.php?t=1646270
Click to expand...
Click to collapse
i flashed stock ICS, flashed KJ1 in odin then I got problems on the boot up, cause of different bootloaders, android chrashed every time I tried to press the android man? i did an full wipe and now i back on stock ICS trying to root again...
i flashed stock ics as well but i want to know if is safe to flash back to GB to root?
AleksLenin said:
i flashed stock ICS, flashed KJ1 in odin then I got problems on the boot up, cause of different bootloaders, android chrashed every time I tried to press the android man? i did an full wipe and now i back on stock ICS trying to root again...
Click to expand...
Click to collapse
You can flash CF-Root kernel with PC Odin but that will increase your flash counter..
Download the prerooted ICS ROM from this thread and flash it with PC Odin..
You'll have ICS ROM with root after flash
nightfox11 said:
i flashed stock ics as well but i want to know if is safe to flash back to GB to root?
Click to expand...
Click to collapse
See me reply to gain root in ICS without going back to GB
matius44 said:
You can flash CF-Root kernel with PC Odin but that will increase your flash counter..
Download the prerooted ICS ROM from this thread and flash it with PC Odin..
You'll have ICS ROM with root after flash
Click to expand...
Click to collapse
I'd like to say thanks, haha, I did not see that earlier. Unfortunately, I ran out of thanks for the day
dr. xp55 said:
I'd like to say thanks, haha, I did not see that earlier. Unfortunately, I ran out of thanks for the day
Click to expand...
Click to collapse
No worries, be proud you're trying your best to help and we all make mistakes
i flashed my phone with odin but my screeen won't turn on?!
i hear sound etc but screen stays black?
what can i do?
lol4it said:
i flashed my phone with odin but my screeen won't turn on?!
i hear sound etc but screen stays black?
what can i do?
Click to expand...
Click to collapse
Did you try a reflash?
matius44 said:
You can flash CF-Root kernel with PC Odin but that will increase your flash counter..
Download the prerooted ICS ROM from this thread and flash it with PC Odin..
You'll have ICS ROM with root after flash
i did flash with pre rooted rom however no root access mobile odin cant work because of this any ideas
Click to expand...
Click to collapse
anubis1126 said:
matius44 said:
You can flash CF-Root kernel with PC Odin but that will increase your flash counter..
Download the prerooted ICS ROM from this thread and flash it with PC Odin..
You'll have ICS ROM with root after flash
i did flash with pre rooted rom however no root access mobile odin cant work because of this any ideas
Click to expand...
Click to collapse
Are you sure you got the prerooted ROM? It's reported that it works..
You can get the CF-Root kernel from Chainfire's thread and flash it using "already rooted.bat" method described in post #2 of said thread..
If that did not work then your only way is Gingerbread, root it, flash ICS with Mobile Odin and keeping root
Click to expand...
Click to collapse
matius44 said:
Did you try a reflash?
Click to expand...
Click to collapse
yes i've tried 3 times with 2 differents roms
EDIT:
dat happens:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.img
<ID:0/003> NAND Write Start!!
<ID:0/003> factoryfs.img
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> zImage
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/005> Added!!
reflashed with the prerooted but no root access
lol4it said:
yes i've tried 3 times with 2 differents roms
EDIT:
dat happens:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.img
<ID:0/003> NAND Write Start!!
<ID:0/003> factoryfs.img
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> zImage
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/005> Added!!
Click to expand...
Click to collapse
I have no idea why your screen is black, sorry..
Try to get a pit file for the 16GB Note and do repartition?
anubis1126 said:
reflashed with the prerooted but no root access
Click to expand...
Click to collapse
Then your only way is to flash directly rootable Gingerbread ROM and start from there, sorry..
where can i get a pit file??
lol4it said:
where can i get a pit file??
Click to expand...
Click to collapse
Search dr.ketan thread..use at your own risk..
matius44 said:
Search dr.ketan thread..use at your own risk..
Click to expand...
Click to collapse
anyways it doen't work now so can it be any worse using odin?
lol4it said:
anyways it doen't work now so can it be any worse using odin?
Click to expand...
Click to collapse
yes use PC Odin, flash the ROM and check if it solved..try couple of reboots also
matius44 said:
yes use PC Odin, flash the ROM and check if it solved..try couple of reboots also
Click to expand...
Click to collapse
his post is so complicated Oo
can u tell me what to download?
lol4it said:
his post is so complicated Oo
can u tell me what to download?
Click to expand...
Click to collapse
Sorry I did not do repartition before and I do not want to be responsible for any possible bricks..you can ask dr.ketan he knows about Odin better than me

[Q] how can I repair wrong installed KERNEL on GT-I9220 - Help please!

Hi Folks,
please bare with me I am a total new comer in this forum and new on Android because of my new Phone:
Samsung Galaxy Note GT-I9220 Chinese Version (but no fake it has Android 4.0.4 and was bought from amazon)
I accidentially installed the franco.Kernel .... don't aks me why.... and since then I am in big troubles :crying:
I can not get a USB Connection to my Win7x64 PC anymore (MTP driver installation fails.... anything I tried did not work)
Eventhough Odin does see my phone but after clicking START if shows me FAILED (Odin 1.85 nor 1.87 works) ... and the phone does seems to do anything (not turn black ... as decsribe in the following threat: http://forum.xda-developers.com/showthread.php?t=1660012 )
So how do I get back to a "normal" Kernel and which file can I use?
Thanks a lot for looking into this.
Le_Tifou:
cowboy:
PS:
All this issues only have come up, because I actually only tried to get full access to all GOOGLE PLAY STORE apps, but google always (90% of all apps) tells me this is incompatible with your phone ... and under [+] sometime says it can not be delivered to your country China or so...
Are you putting the phone in download mode when you connect to odin? If yes then paste the odin logs.
here the ODIN log for 1.87 but same for 1.85
nokiamodeln91 said:
Are you putting the phone in download mode when you connect to odin? If yes then paste the odin logs.
Click to expand...
Click to collapse
Thanks for having a look into this.
So Windows recognizes the following drivers if it is in Download mode
SAMSUNG Mobile USB CDC Composite Device
SAMSUNG Mobile USB Modem
And ODIN 1.87 recognizes the device under ID:COM yellow 0:[com3]
<ID:0/003> Added!!
after START PIT and Bootloader
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The Phone does not do anything. :crying:
I assume that the wrong KERNEL is causing this missbehaviour!?
what to do now? Any idea?
Thx 1000times
So how do I first get a new fitting Kernel?
Le_Tifou said:
Hi Folks,
please bare with me I am a total new comer in this forum and new on Android because of my new Phone:
Samsung Galaxy Note GT-I9220 Chinese Version (but no fake it has Android 4.0.4 and was bought from amazon)
I accidentially installed the franco.Kernel .... don't aks me why.... and since then I am in big troubles :crying:
I can not get a USB Connection to my Win7x64 PC anymore (MTP driver installation fails.... anything I tried did not work)
Eventhough Odin does see my phone but after clicking START if shows me FAILED (Odin 1.85 nor 1.87 works) ... and the phone does seems to do anything (not turn black ... as decsribe in the following threat: http://forum.xda-developers.com/showthread.php?t=1660012 )
So how do I get back to a "normal" Kernel and which file can I use?
Thanks a lot for looking into this.
Le_Tifou:
cowboy:
PS:
All this issues only have come up, because I actually only tried to get full access to all GOOGLE PLAY STORE apps, but google always (90% of all apps) tells me this is incompatible with your phone ... and under [+] sometime says it can not be delivered to your country China or so...
Click to expand...
Click to collapse
You would better restock your note.
You will need a rom with four files: .pit , .pda, modem and csc
The rom MUST be made for your phone and you may find it in samfirmware.com.
If your phone can't enter dowload mode, you'll need a USB JIG.
Hope this can help.
After reading the Odin resulst, try to flash only PDA as your error is comming from the PIT file.
Uncheck "repartition"
First get a kernel for your phone in tar.md5, and flash it by selecting it in the PDA tab. Don't use PIT for now.
---------- Post added at 03:12 PM ---------- Previous post was at 03:10 PM ----------
Phone has to be in download mode to use odin
Is that the right file: 165512339/c6b85b4/I9220ZCLPL_I9220OZHLPL_CHN.zip ??
nokiamodeln91 said:
First get a kernel for your phone in tar.md5, and flash it by selecting it in the PDA tab. Don't use PIT for now.
---------- Post added at 03:12 PM ---------- Previous post was at 03:10 PM ----------
Phone has to be in download mode to use odin
Click to expand...
Click to collapse
Thanks for your adive.
How do I get the right kernel files I have no glue for what I should search for....
Ok I found recently this threat which seams to point to the origínal chinese android versions:
droidevelopers dot com/f479/11859-samsung-galaxy-note-i9220-china-firmware-list.html
which points to the following
CHINA I9220 Ice Cream Sandwich 4.0.4 Firmwares
Download PDA Version Release Date CSC version Country / Carrier
Link I9220ZCLPL 4.0.4 2012 July I9220OZHLPL China
from hotfile DOT com/dl/165512339/c6b85b4/I9220ZCLPL_I9220OZHLPL_CHN.zip =606MB
Is that the right stuff? I am just downloading it.
Thx
Even if you get a whole rom, it's good. Flash with odin without the pit
Le_Tifou said:
Thanks for your adive.
How do I get the right kernel files I have no glue for what I should search for....
Ok I found recently this threat which seams to point to the origínal chinese android versions:
droidevelopers dot com/f479/11859-samsung-galaxy-note-i9220-china-firmware-list.html
which points to the following
CHINA I9220 Ice Cream Sandwich 4.0.4 Firmwares
Download PDA Version Release Date CSC version Country / Carrier
Link I9220ZCLPL 4.0.4 2012 July I9220OZHLPL China
from hotfile DOT com/dl/165512339/c6b85b4/I9220ZCLPL_I9220OZHLPL_CHN.zip =606MB
Is that the right stuff? I am just downloading it.
Thx
Click to expand...
Click to collapse
Yes, should be fine, it's made for GT-I9220. Just flash PDA.:good:
Thanks KERNEL has been changed back to original
lionelia said:
Yes, should be fine, it's made for GT-I9220. Just flash PDA.:good:
Click to expand...
Click to collapse
Thanks both of you!!!
Odin 1.87 worked so far. And immediately Windows recognized the phone as GT-I9220 again.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9220ZCLPL_I9220ZCLPI_I9220OZHLPL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Sbl.bin
<ID:0/003> param.lfs
<ID:0/003> factoryfs.img
<ID:0/003> zImage
<ID:0/003> hidden.img
<ID:0/003> cache.img
<ID:0/003> modem.bin
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
I got after disconneting and taking out battery and restart -
got into mode VOL-up + power-on + center key
and made a factory reset as well as deleted cache
Modell: GT-I9220
Android version: 4.0.4
Baseband: I9220ZCLPI
KERNEL: 3.0.15 - ...
Build: IMM76D.ZCLPL
When I unpacked the ZIP file there was an additioal file ss_DL.dll what shall I do with it?
now it works thanks to you!
Great!
Nothing to do with the the dll file. Congrats for a working phone.
Rooting failure
nokiamodeln91 said:
Nothing to do with the the dll file. Congrats for a working phone.
Click to expand...
Click to collapse
Please help,
I was trying to root my Samsung galaxy note gt-i9220, I followed the video instructions from rootgalaxynote.com, I used the CWM.Zip, CWM-supers-v0.87.zip and after I installed the franco kernel-r5.zip
PROBLEM: after installing the franco kernel when I restarted the system my note comes on and shows Galaxy Note GT-I9220 and after that I have a black screen.
What can I do to get back the original state, it seems I can not handle rooting it. However it can get to the download mode when I place the volume up+power+home burton.
NB: I did not use a computer while doing this neither did I backup any thing

[ODIN][TAR] 5.0.0 I9505GUEUDNL3 Full Restore

NL3 is released.
NOTE: This image is *NOT* rooted! If you need root, see here.
WARNING: Stop asking if you can flash this on other phones. You can NOT. It is meant for the I9505G ONLY. This is NOT a "rom". This is a system image for the I9505G. Flashing to any other phone will brick it.
Kernel Source:
http://opensource.samsung.com/reception/receptionSub.do?method=search&searchValue=GT-I9505G
OTA zip (must be sideloaded in stock recovery):
http://android.clients.google.com/p...USER_I9505G_XAR_UCNF3_to_UDNL3_Update_FWD.zip
ODIN FULL RECOVER IMAGE (root is NOT built in):
Shamelessly stealing @MJHawaii instructions from this thread (THANK YOU):
http://forum.xda-developers.com/showthread.php?t=2398217
(DISCLAIMER) Please read and follow the instructions carefully. I nor anyone else on this forum is responsible if you brick your phone, lose your job, or life as you know it ends. Make sure you fully Understand what you're doing before you do it. Modifying any phone comes with a risk.
INSTRUCTIONS:
WARNING: Please do not flash this if you're low on battery...go charge your phone!
o) Download the I9505GUEUDxxx_FULL.tar.md5.gz package from below
o) Make sure you have the USB Drivers installed and you have Odin 3.09 from below
o) Put your phone in download mode and connect it to USB:
-Disconnect the phone from USB
-Power OFF your phone
-Hold Volume Down, Home, and Power
-When the "WARNING!!!" screen comes up, release the buttons
-Volume up to enter download mode
-Connect the phone to USB
o) Open Odin
o) Click on AP, then select the I9505GUEUDxxx_FULL.tar.md5.gz package you downloaded
o) Odin will extract the tar md5 file from the gzip archive, and this will take a while...be patient
o) Once the tar md5 is loaded, make sure you have a COM PORT in Odin ( any )
o) Click Start and wait till it finishes flashing...your phone should reboot when it's done
NOTE: If your phone does not boot, then boot into stock recovery and Wipe Data Factory Reset.
DOWNLOADS:
ODIN 3.09
I9505GUEUDNL3_FULL
A GIANT thank you to @MJHawaii for helping me learn this process!!!
Thank you for this. This has been a very much needed update IMO. Your work is always appreciated here. Whether or not the odin image is rooted, it is an easy fix for sure. Once again thank you. And enjoy the fresh Lolli.
I specifically decided not to use a rooted image this time due to the fact that being rooted blew up the ota for me. I wanted a place to start from that was clean. I figure our first 5.x update was a good place to kick out a new, fresh baseline build.
SamuriHL said:
I specifically decided not to use a rooted image this time due to the fact that being rooted blew up the ota for me. I wanted a place to start from that was clean. I figure our first 5.x update was a good place to kick out a new, fresh baseline build.
Click to expand...
Click to collapse
Good choice, in my opinion.
jpculp said:
Good choice, in my opinion.
Click to expand...
Click to collapse
I second (or 3rding) that .
For the first time ever i'm going to use Stock img with no root and happy about that
How to install a firmware i9505G GPE in an international I9505?
opoeta said:
How to install a firmware i9505G GPE in an international I9505?
Click to expand...
Click to collapse
You read the big red warning at the top of the post!
I9505 and I9505G isnt the same device?
Same way as I9505 ROM works in a I9505G, should happen otherwhise (or no?)
I just installed this and so far everything is working great. One small thing is confusing me though. I can't seem to find the settings for the Home button. When I push it nothing happens, unless I hold it down and then I get the app switcher. I feel really dumb right now. Lol
_DrizeX_ said:
I9505 and I9505G isnt the same device?
Same way as I9505 ROM works in a I9505G, should happen otherwhise (or no?)
Click to expand...
Click to collapse
Read the OP
So, isnt a ROM
Im sorry
_DrizeX_ said:
I9505 and I9505G isnt the same device?
Same way as I9505 ROM works in a I9505G, should happen otherwhise (or no?)
Click to expand...
Click to collapse
This is NOT A ROM. Doesn't it SAY that in the OP? Does it not also say that it will brick any device OTHER than an i9505G? They are NOT the same device. They use completely different partition tables. Rom devs take that into account. Since this is not a rom, it will not take that into account.
_DrizeX_ said:
So, isnt a ROM
Im sorry
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2557353
Thanks for this
Attempted to flash the I9505GUEUDNL3_FULL.tar.md5 image and it failed. Here is the Odin message:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> NON-HLOS.bin
<ID:0/003> modem.bin
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Now I am soft bricked. I can successfully flash a stock recovery and get into recovery but that's it. Odin flashing any full image fails at the same spot.
Any tips or help would be greatly appreciated!
P.S. I can flash a stock recovery but attempting to flash a modem fails at the same spot. Confused.
Best regards,
Derek
What rom are you coming from?
Latest Stock 4.4.4 Rooted (I think NF3 but can't tell since I can't start up )
Just installed this last night on my stock S4 GPE. Working flawlessly and the phone feels a lot snappier than with 4.4.4. Lollipop is such a nice update.
Not exactly a problem, but I notice that the stock Android Messenger (SMS/Text) app is gone and that it's now Hangouts that by default handles texts/SMS. I find no separate stock texting app installed, unlike on my Nexus 6 with Lollipop.
DerekChas said:
Attempted to flash the I9505GUEUDNL3_FULL.tar.md5 image and it failed. Here is the Odin message:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> NON-HLOS.bin
<ID:0/003> modem.bin
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Now I am soft bricked. I can successfully flash a stock recovery and get into recovery but that's it. Odin flashing any full image fails at the same spot.
Any tips or help would be greatly appreciated!
P.S. I can flash a stock recovery but attempting to flash a modem fails at the same spot. Confused.
Best regards,
Derek
Click to expand...
Click to collapse
Try a different USB cable and./or USB port. See if that makes any difference.
People have been asking about root quite a bit. I put together a new tool for those that aren't sure how to install it on a phone like this.
DOWNLOADS:
GPE Root
https://www.clockworkmod.com/rommanager (Use the i9505 NON touch version for rooting)
http://download.chainfire.eu/supersu
INSTALL:
o) Create a C:\GPE-Root folder
o) Unzip GPE-Root.zip to the C:\GPE-Root folder. NOTE: If you do not follow directions, then do NOT have spaces in the path you choose to use or it WILL fail.
o) Copy the CWM recovery img file to the C:\GPE-Root\recovery folder
o) Copy the SuperSU zip file to the C:\GPE-Root\supersu folder
USAGE:
o) Run the run.bat in the C:\GPE-Root folder
o) Follow instructions
NOTE: If your phone is not detected in ADB sideload mode, install the universal ADB diver in the C:\GPE-Root\ADB_USB folder

Bricked :(

I can't boot my phone, it says Custom binary blocked by FRP
I can't flash twrp, and whenever I try to flash a stock md5, odin fails
What do I do?
Update- I tried to flash a stock rom from http://forum.xda-developers.com/not...ware-firmware-kernel-modem-recovery-t2902574/
Results were
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Firs of all. How did you brick your phone?
Sent from my SM-N910T using Tapatalk
Did you by chance turned on the Samsung Activation Lock?.This happened to me the first time i tried to install custom rom, i thought the phone had bricked but I was able to get into recovery mode and restart the OS. Try booting into recovery mode and choose restart system If not you will need to flash a stock rom but it needs to be the same version you had.
nano303 said:
Firs of all. How did you brick your phone?
Sent from my SM-N910T using Tapatalk
Click to expand...
Click to collapse
I booted it into recovery and got the Custom Binary Blocked message when I try to boot
glm0025 said:
Did you by chance turned on the Samsung Activation Lock?.This happened to me the first time i tried to install custom rom, i thought the phone had bricked but I was able to get into recovery mode and restart the OS. Try booting into recovery mode and choose restart system If not you will need to flash a stock rom but it needs to be the same version you had.
Click to expand...
Click to collapse
I would, but I can't boot into recovery mode
Fixed it! I flashed about a dozen different files on Odin, finally got a 5.1.1 tar.md5, that's working
aaronfrickinaustin said:
Fixed it! I flashed about a dozen different files on Odin, finally got a 5.1.1 tar.md5, that's working
Click to expand...
Click to collapse
Which one worked?? Please tell me! Stuck in the same situation
This error is due to the Samsung Activation Lock being on before flashing a custom rom, be sure to turn this off in the future before installing another rom. If by chance you forget and get the error just try flashing back the stock version of the rom you currently have and it should come up.

Categories

Resources