Database Develop

[q] ROM flash problem, help!!!

Whilst attempting to update a custom ROM through my SD card. I ended up with my Samsung endlessly stuck in Samsung Galaxy S start up screen. I followed the instrutions in the Q &A section
by using ODIN to flash the 513 PIT (PDA Phone and CSC)
this what ODIN said:
PIT 513 flashed
then
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> Removed!!
device did not start by itself
ODIN says "RESET!"
the device did not reset automatically, nor could i manually. I repeated the process via ODIN
I removed battery and started my galaxy into download mode.
and this is what is said (i believe including my previous attempt)
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> Removed!!
<ID:0/007> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> Removed!!
In the top lefthand big box of ODIN the word 'PASS!' is displayed on a green back ground
once again I am unable to restart my galaxy from the on off button.
I am able to start the phone in download mode and my laptop reassuring goes 'bong' to tell me it can see it. I wanted to ask advice on what to do next as I feel I am at a critical point. If I mess it up from here I feel I may have no way back. Please advice....

First.. Your phone is NOT bricked.
Change the title......
Second read what you need to do with the custom Rom in that tread you got it from.
I guess you don't need pit and don't need to re-partition the phone and i don't think you even use the right pit file even if you needed it.
Else just flash back a good firmware.
Sent from GT-I9000 jpo. My own kernel for z4mod and with 342MB Ram

DamianGto said:
First.. Your phone is NOT bricked.
Change the title......
Second read what you need to do with the custom Rom in that tread you got it from.
I guess you don't need pit and don't need to re-partition the phone and i don't think you even use the right pit file even if you needed it.
Else just flash back a good firmware.
Sent from GT-I9000 jpo. My own kernel for z4mod and with 342MB Ram
Click to expand...
Click to collapse
Thank you for your response, and I have changed my title.
The custom ROM that I installed was from the sd card not from ODIN so there is no detailed information about this in the ROM thread.
After the failed sd card flash I have not been able to get back into recovery mode or switch the phone back on. I could only get into download mode, so I resorted to following some of the ODIN instructions on Q&A.
I am assuming that the best route is, as you say to use odin to flash the ROM back using some 'good' firmware.
Can you recommend a suitable ROM and where I can download it?
Thanking you in advance.

I'd suggest flashing an Eclair ROM that has 2e Recovery with Odin incl. Repartition.
Or a 2.2 ROM like JPK and then CF-Root to get 2e Recovery back.
Then flash the custom ROM.
I doubt that no flash instructions were given...
Not once did you even tell us what files you even used (ROM etc.)

xero2002 said:
I'd suggest flashing an Eclair ROM that has 2e Recovery with Odin incl. Repartition.
Or a 2.2 ROM like JPK and then CF-Root to get 2e Recovery back.
Then flash the custom ROM.
I doubt that no flash instructions were given...
Not once did you even tell us what files you even used (ROM etc.)
Click to expand...
Click to collapse
Hi xero2002
Thank you for your advice.
As the ROM was an SD rom update odin isnt talked about a lot in the thread. The ROM I was upgrading to was Darky's latest Legendary Steel 4.1 Voodoo. . I was upgrading from Darky's previous Raw Steel 4.0 edition. Apologies for not having said it before

I don't think Darky's rom is meant to be flashed through odin Read the instructions in the thread on how you're supposed to upgrade it
I suggest flashing to some old eclair firmware, since that comes with 2e recovery, will save you the step of having to get CF root for it

nwsk is right. Darky's isn't meant to be flashed with Odin.
And he is also right on what he said to do next.
Pretty much what I also suggested.
You have two options.
Either flashing an Eclair (2.1) ROM which comes with 2e Recovery using Odin.
Or flashing a Froyo (2.2) ROM which comes with 3e Recovery using Odin and then applying CF-Root to get the 2e Recovery back.
From there on you can then flash the newest Darky using his instructions.
http://forum.xda-developers.com/showthread.php?t=814091
This time please READ EVERYTHING he has to say. It really does help a lot!
For whatever reason I can't find the last Eclair post anymore.
So here's the second option I gave you, it's just one small extra step.
Do this and precisely follow instructions:
http://forum.xda-developers.com/showthread.php?t=790686
Just the part where it says "HOWTO UPGRADE TO JPK USING ODIN:".
Then go here and grab the file "CF-Root-JPK-v1.1.zip" from the attachments.
http://forum.xda-developers.com/showthread.php?t=788108
Flash following instructions.
When done, you can continue with Darky's or some other custom ROM.

Thank you all for your help!
Thanks for all your input, its all sorted out now
Abso

[Q] how to root an SGN after flashing stock ICS with odin pc

i want too root my phone! i just flashed the stock ICS ROM in Odin Pc.
i tried this - Make sure your SGN is NOT connected to your computer
- Reboot your SGN into "download mode" (Vol down + Home + Power))
- Start ODIN
- Click the PDA button, and select the "SGN_XX_OXA_KJ1_FACTORYFS.tar" file
- Connect the SGN to your computer
- Make sure "repartition" is NOT checked
- Click the START button
- Wait for the phone to reboot TWICE
- Done.
Now you have your device Rooted, Install Mobile Odin Pro n update your device to any new ROM with Mobile Odin.
but it didnt work. anyone knows the best way getting an ics stock rom rooted?

AleksLenin said:
i want too root my phone! i just flashed the stock ICS ROM in Odin Pc.
i tried this - Make sure your SGN is NOT connected to your computer
- Reboot your SGN into "download mode" (Vol down + Home + Power))
- Start ODIN
- Click the PDA button, and select the "SGN_XX_OXA_KJ1_FACTORYFS.tar" file
- Connect the SGN to your computer
- Make sure "repartition" is NOT checked
- Click the START button
- Wait for the phone to reboot TWICE
- Done.
Now you have your device Rooted, Install Mobile Odin Pro n update your device to any new ROM with Mobile Odin.
but it didnt work. anyone knows the best way getting an ics stock rom rooted?
Click to expand...
Click to collapse
Either you flashed stock ICS, flashed that KJ1 file in odin, and you went back to Gingerbread (in that case, what happened? were you able to boot up? cause of different bootloaders) or you did NOT flash stock ICS and that file you flashed (KJ1) is an already, very old stock Gingerbread rom.
In any case, http://forum.xda-developers.com/showthread.php?t=1646270

re:
dr. xp55 said:
Either you flashed stock ICS, flashed that KJ1 file in odin, and you went back to Gingerbread (in that case, what happened? were you able to boot up? cause of different bootloaders) or you did NOT flash stock ICS and that file you flashed (KJ1) is an already, very old stock Gingerbread rom.
In any case, http://forum.xda-developers.com/showthread.php?t=1646270
Click to expand...
Click to collapse
i flashed stock ICS, flashed KJ1 in odin then I got problems on the boot up, cause of different bootloaders, android chrashed every time I tried to press the android man? i did an full wipe and now i back on stock ICS trying to root again...

i flashed stock ics as well but i want to know if is safe to flash back to GB to root?

AleksLenin said:
i flashed stock ICS, flashed KJ1 in odin then I got problems on the boot up, cause of different bootloaders, android chrashed every time I tried to press the android man? i did an full wipe and now i back on stock ICS trying to root again...
Click to expand...
Click to collapse
You can flash CF-Root kernel with PC Odin but that will increase your flash counter..
Download the prerooted ICS ROM from this thread and flash it with PC Odin..
You'll have ICS ROM with root after flash
nightfox11 said:
i flashed stock ics as well but i want to know if is safe to flash back to GB to root?
Click to expand...
Click to collapse
See me reply to gain root in ICS without going back to GB

matius44 said:
You can flash CF-Root kernel with PC Odin but that will increase your flash counter..
Download the prerooted ICS ROM from this thread and flash it with PC Odin..
You'll have ICS ROM with root after flash
Click to expand...
Click to collapse
I'd like to say thanks, haha, I did not see that earlier. Unfortunately, I ran out of thanks for the day

dr. xp55 said:
I'd like to say thanks, haha, I did not see that earlier. Unfortunately, I ran out of thanks for the day
Click to expand...
Click to collapse
No worries, be proud you're trying your best to help and we all make mistakes

i flashed my phone with odin but my screeen won't turn on?!
i hear sound etc but screen stays black?
what can i do?

lol4it said:
i flashed my phone with odin but my screeen won't turn on?!
i hear sound etc but screen stays black?
what can i do?
Click to expand...
Click to collapse
Did you try a reflash?

matius44 said:
You can flash CF-Root kernel with PC Odin but that will increase your flash counter..
Download the prerooted ICS ROM from this thread and flash it with PC Odin..
You'll have ICS ROM with root after flash
i did flash with pre rooted rom however no root access mobile odin cant work because of this any ideas
Click to expand...
Click to collapse

anubis1126 said:
matius44 said:
You can flash CF-Root kernel with PC Odin but that will increase your flash counter..
Download the prerooted ICS ROM from this thread and flash it with PC Odin..
You'll have ICS ROM with root after flash
i did flash with pre rooted rom however no root access mobile odin cant work because of this any ideas
Click to expand...
Click to collapse
Are you sure you got the prerooted ROM? It's reported that it works..
You can get the CF-Root kernel from Chainfire's thread and flash it using "already rooted.bat" method described in post #2 of said thread..
If that did not work then your only way is Gingerbread, root it, flash ICS with Mobile Odin and keeping root
Click to expand...
Click to collapse

matius44 said:
Did you try a reflash?
Click to expand...
Click to collapse
yes i've tried 3 times with 2 differents roms
EDIT:
dat happens:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.img
<ID:0/003> NAND Write Start!!
<ID:0/003> factoryfs.img
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> zImage
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/005> Added!!

reflashed with the prerooted but no root access

lol4it said:
yes i've tried 3 times with 2 differents roms
EDIT:
dat happens:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.img
<ID:0/003> NAND Write Start!!
<ID:0/003> factoryfs.img
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> zImage
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/005> Added!!
Click to expand...
Click to collapse
I have no idea why your screen is black, sorry..
Try to get a pit file for the 16GB Note and do repartition?
anubis1126 said:
reflashed with the prerooted but no root access
Click to expand...
Click to collapse
Then your only way is to flash directly rootable Gingerbread ROM and start from there, sorry..

where can i get a pit file??

lol4it said:
where can i get a pit file??
Click to expand...
Click to collapse
Search dr.ketan thread..use at your own risk..

matius44 said:
Search dr.ketan thread..use at your own risk..
Click to expand...
Click to collapse
anyways it doen't work now so can it be any worse using odin?

lol4it said:
anyways it doen't work now so can it be any worse using odin?
Click to expand...
Click to collapse
yes use PC Odin, flash the ROM and check if it solved..try couple of reboots also

matius44 said:
yes use PC Odin, flash the ROM and check if it solved..try couple of reboots also
Click to expand...
Click to collapse
his post is so complicated Oo
can u tell me what to download?

lol4it said:
his post is so complicated Oo
can u tell me what to download?
Click to expand...
Click to collapse
Sorry I did not do repartition before and I do not want to be responsible for any possible bricks..you can ask dr.ketan he knows about Odin better than me

[Q] Firmware update encountered an issue.

It basicially got stuck at Odin while trying to update to Jelly Bean, then I took out the battery & now keeps appearing "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Also can't factory reset as well as it to detect at Kies. Only place I can access is Odin currently.
This what happens every time in Odin both before & now.
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> data.img
<ID:0/003> factoryfs.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Can anyone help please?
Thanks

Install drivers on your pc
Sent from my GT-N7000 using Tapatalk 2

abhinav quietly brilliant said:
Install drivers on your pc
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Which drivers?

How many time you try Flashing it???...

These drivers
For x64 http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x64.shtml
For x86 http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x86.shtml
Sent from my GT-N7000 using Tapatalk 2

IzoKuro said:
It basicially got stuck at Odin while trying to update to Jelly Bean, then I took out the battery & now keeps appearing "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Also can't factory reset as well as it to detect at Kies. Only place I can access is Odin currently.
This what happens every time in Odin both before & now.
Can anyone help please?
Thanks
Click to expand...
Click to collapse
you may have to repartition.. read this..
http://forum.xda-developers.com/showthread.php?t=1667886
stuck at factoryfs.img is a symptom of emmc brick..
your phone might encountered lock up some sectors on your internal storage.. so repartitioning might be a consideration..

Okay, so far I've flashed a eMMC Safe Kernel via Odin and now able to go to recovery mode.
It now shows model number display with the yellow triangle sign showing & can't go further than that.
Any idea what to do next?

IzoKuro said:
Okay, so far I've flashed a eMMC Safe Kernel via Odin and now able to go to recovery mode.
It now shows model number display with the yellow triangle sign showing & can't go further than that.
Any idea what to do next?
Click to expand...
Click to collapse
If it Driver problem PC Odin will not detect you phone...
now you can go to stock recovery or what?...try flash Philz kernel using PC Odin.. if done, boot to recovery and flash any custom Rom...if no luck i'm sure your phone already hard brick/super bricked....
check out this method to revive bricked phone...PIT file method to revive your phone from a MMC_CAP_ERASE brick

Now you have safe kernel then boot into recovery do all the wipes and then boot into download mode and then try flashing the rom from pc odin
Sent from my GT-N7000 using Tapatalk 2

It seems that the only thing that is stopping me from getting a full recovery is now the eMMC...working on it atm.

abhinav quietly brilliant said:
Now you have safe kernel then boot into recovery do all the wipes and then boot into download mode and then try flashing the rom from pc odin
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Hey guys,
I've been working with IzoKuro in trying to figure out how to sort out this phone, We have sorted out everything as Izo has said but now as he has said we are having trouble flashing the custom rom I've tried to do it via recovery mode and it comes up with this:
E:Error in /emmc/CUSTOM ROM.zip
(Status:7)
Installation aborted.
Click to expand...
Click to collapse
I've tried it with a stock ROM as well and that isn't any better.
For that it comes up with:
E:Can't open /emmc/CUSTOM ROM.zip
(Bad)
Installation aborted.
Click to expand...
Click to collapse
So can someone let me know what option on PC Odin that we have to use to flash that rom.
Thanks,
Nippon

What recovery?..stock or what?..give more detail..
What kernel do you flash before?
What custom rom that you try to flash on recovery?
How many time you flash on PC Odin and stuck on factoryfs.img?
What rom your on before you flash using Odin in the 1st place?
Did you make a wipe on stock ICS kernel/recovery?
Sent from my GT-N7000 using Tapatalk HD

It's possible that the zip you have downloaded is bad so download a fresh new copy and as you said you want flash a custom rom! Is that rom a cyanogen based rom? If yes then download cm kernel and flash it in recovery then install the custom rom
Sent from my GT-N7000 using Tapatalk 2

My N7000 is in a bootloop. How can I fix it?

Hello everyone! I hope you're all doing great. I am a new user to this site. I hope this is the right place to get assistance, because my case is different than everyone else
I have a GT-N7000, and it's in a bootloop. I can access both recovery and download modes. But when I try to wipe data in recovery, it gets stuck. And when I try to flash a rom, it also gets stuck. I tried flashing stock firmware via Odin. I have tried a lot of firmwares (GB, ICS, and JB). The flashing process gets stuck. I have tried everything I could. If you can provide me with a solution for how to get out of this ordeal, I would really appreciate it so much.
Thank you in advance !

Sam322 said:
Hello everyone! I hope you're all doing great. I am a new user to this site. I hope this is the right place to get assistance, because my case is different than everyone else
I have a GT-N7000, and it's in a bootloop. I can access both recovery and download modes. But when I try to wipe data in recovery, it gets stuck. And when I try to flash a rom, it also gets stuck. I tried flashing stock firmware via Odin. I have tried a lot of firmwares (GB, ICS, and JB). The flashing process gets stuck. I have tried everything I could. If you can provide me with a solution for how to get out of this ordeal, I would really appreciate it so much.
Thank you in advance !
Click to expand...
Click to collapse
Where does it gets stuck? From what I read I am afraid it is an emmc superbrick. But I cant judge because I dont know where it gets stuck..
Sent from my Galaxy Nexus using XDA Premium HD app

What recovery do you have?

mrgnex said:
Where does it gets stuck? From what I read I am afraid it is an emmc superbrick. But I cant judge because I dont know where it gets stuck..
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
Here is the odin log while flashing GB firmware.
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection
<ID:0/005> Initialization
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> factoryfs.img
It is stuck right here.

[Q] Imposible to install CWM in GT7000 4.1.2

Hi all,
I am getting mad after several hours trying to just install CWM in the GT-7000.
I root it using the farmaroot and it was smooth.
after I tried the easy way of rom manager... and it didnt work.
I even download myself the Philz CMW 6
http://forum.xda-developers.com/showthread.php?t=1901191
philz_touch_6.07.9-n7000.tar.md5
I start the phone volume down - power-home , click volume up to enter into the downloading mode
run Odin 3.09 getting after install the samsung drivers... I get COM9 (light blue?)
I select the md5 file with the AP and click start and this is the output
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> recovery.img
<ID:0/009> NAND Write Start!!
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
really I dont know what else to try on...any idea??
thanks in advance.
jose

jacortijo said:
Hi all,
I am getting mad after several hours trying to just install CWM in the GT-7000.
I root it using the farmaroot and it was smooth.
after I tried the easy way of rom manager... and it didnt work.
I even download myself the Philz CMW 6
http://forum.xda-developers.com/showthread.php?t=1901191
philz_touch_6.07.9-n7000.tar.md5
I start the phone volume down - power-home , click volume up to enter into the downloading mode
run Odin 3.09 getting after install the samsung drivers... I get COM9 (light blue?)
I select the md5 file with the AP and click start and this is the output
really I dont know what else to try on...any idea??
thanks in advance.
jose
Click to expand...
Click to collapse
You can try to flash philz kernel from here http://forum.xda-developers.com/showthread.php?t=1901191
This time try .zip file and flash from stock recovery
Sent from my GT-N7000 using Tapatalk

Where did you select the file in Odin? What's AP?

treacherous_hawk said:
You can try to flash philz kernel from here http://forum.xda-developers.com/showthread.php?t=1901191
This time try .zip file and flash from stock recovery
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
I finally managed to install using an old Odin version 1.84 a whole custom ROM with the cwm included. Then I could boot into recovery and install the cyanogenmod custom ROM that I wanted.
Thanks a lot anyway,

Hi jacortijo plus help me out how you did that because I'm feeling same to install kitkat rom in my note 1n7000 plus help me out I have rooted my phone nd I'm using jellybean rom
I want to install philztouchrecovery to install kitkat rom but I'm not able to do that so old help me out