Database Develop

[Q] Need Mac help going from GE back to stock

So I was able to completely convert my AT&T One to a GE phone per the thread over at http://forum.xda-developers.com/showthread.php?t=2358781.
I find out afterwards that my bottom mic does not work on phone calls, not sure how long it's been this way since I normally use bluetooth. The back mic works for speakerphone but that won't do me any good. Now I want to get back to stock to see if the mic comes back to life and in case I have to take it back to AT&T.
I've managed to maneuver my way around the terminal in Mac OSX to flash custom roms and such. I'm S-off and have super CID. The part I'm stuck at is finding a RUU zip to revert back to stock. Most of the links I've found are dead or are for the exe that will run in windows only.
This is the readout of my getvar:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.14.1700.15
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: xxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4282mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-21fde4b846
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I can't even seem to flash the developer RUU without an error, and I'm wondering if it might have do do with the MID. Need some pointing in the right direction, thanks!

when you converted did you back up your stock HBOOT?
if so you can put it back,
then run the AT&T RUU
OR conversely it has been discovered that if you flash the 2.17 firmware found in this post
http://forum.xda-developers.com/showpost.php?p=42556698&postcount=24958
you can then flash a downgraded RUU.

sent luditr
gunnyman said:
when you converted did you back up your stock HBOOT?
if so you can put it back,
then run the AT&T RUU
OR conversely it has been discovered that if you flash the 2.17 firmware found in this post
http://forum.xda-developers.com/showpost.php?p=42556698&postcount=24958
you can then flash a downgraded RUU.
Click to expand...
Click to collapse
Thanks gunny, I was hoping you'd answer since you use a mac also. I did not back up my HBOOT, but I believe I have the stock one that someone else uploaded. I'll give the firmware and downgrade a shot. Do you happen to know where to find the zip and not exe for the stock AT&T One?

acquiredhate said:
Thanks gunny, I was hoping you'd answer since you use a mac also. I did not back up my HBOOT, but I believe I have the stock one that someone else uploaded. I'll give the firmware and downgrade a shot. Do you happen to know where to find the zip and not exe for the stock AT&T One?
Click to expand...
Click to collapse
I'm afraid I don't.
I use vmware and an old copy of windows XP when I need an RUU.
If you don't have VMware Virtualbox is free and will also work

[Q] Firmware and S-OFF

I'm using an AT&T and I'm looking to get S-OFF but I'm having issues with it and failing after pouring 8 times. I've tried it several times with no success. Now I had a stock AT&T ONE, not a GPE, but I flashed a signed, 3.06.1700.10 firmware, which I'm now on. I'm stuck because I can't update my firmware and cannot get S-OFF.
I'd like to figure out how I can get S-OFF or update my firmware and try another version of rumrunner.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.18.3263.15
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.06.1700.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT3XXXXXXXXX
(bootloader) imei: XXXXXXXXXXXXXXXXX
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4243mV
(bootloader) partition-layout: Generic
(bootloader) security: on
Click to expand...
Click to collapse

Goatshaver said:
I'm using an AT&T and I'm looking to get S-OFF but I'm having issues with it and failing after pouring 8 times. I've tried it several times with no success. Now I had a stock AT&T ONE, not a GPE, but I flashed a signed, 3.06.1700.10 firmware, which I'm now on. I'm stuck because I can't update my firmware and cannot get S-OFF.
I'd like to figure out how I can get S-OFF or update my firmware and try another version of rumrunner.
Click to expand...
Click to collapse
Did you meet all the requirements in this page?
http://rumrunner.us/instructions/

Prash8429 said:
Did you meet all the requirements in this page?
http://rumrunner.us/instructions/
Click to expand...
Click to collapse
All but USB 2.0. I tried using this ROM first, 3.06.1700.10 - Stock HTC Google Play Edition v1.1, but I had problems with it failing on the ADB. So I flashed ARHD 4.1 GE ROM and didn't have any ADB issues but it would just go through the pours and tell me to try again.
Someone mentioned udating the firmware to 3.07.1700.10 but I can't do that as it doesn't appear to be a signed firmware.

I've achieved S-OFF.
I was on firmware 3.06.1700.10. Flashed ARHD 4.1 GE ROM and used the Rumrunner for firmware 3.07.1700.10 and had no problems at all. Worked the first time through.

[Q] HTC ONE 802D HELP PLZZ!!:crying:

I have a HTC One 802d (m7c_dwg) indian dual sim version..
I have messed it up pretty much.
I am new to XDA forum. Maybe I am not able to search well.
However, when my phone was working perfectly fine and stock it was:
version: 0.5
version-bootloader: 2.27.0000
version-baseband: 1.01.32.0917
version-cpld: None
version-microp: None
version-main: 2.23.720.2
version-misc: PVT SHIP S-ON
product: m7cdwg
platform: HBOOT-8064
modelid: PN0751000
cidnum: HTC__038
partition-layout: Generic
security: on
build-mode: SHIP
hbootpreupdate: 11
gencheckpt: 0
After this I have made a terrible mistake.
I went S-OFF and flashed this RUU. The onl;y RUU.exe i could find.
ruu_m7c_dwg_jb_50_htccn_chs_ct_1.12.1401.1_radio_1237.17.18.0423release_signed
This has changed my hboot, software no., radio everything and i am not able to get any signal on my phone.
After this i upgraded the firmware to
OTA_M7C_DWG_JB_50_S1_HTCCN_CHS_CT_2.40.1401.1-2.36.1401.1_release_339188zxf4sldwhr7k7cw8
MY condition now is:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.27.0000
(bootloader) version-baseband: 2.03.30.1025
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.40.1401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT382MP00013
(bootloader) imei: 357607050351635
(bootloader) meid: A1000037A614ED
(bootloader) product: m7cdwg
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0751000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 4120mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-b78ee36f
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Still of no help. I am not getting any signal even now. Whenever i try to get back to stock via installing Nandroid backup i created when it was stock. It flashes well.
But as soon as it boots. It reboots after few seconds and keeps rebooting like that.:crying:
I dont know now what to do. I have tried flashing soul ROMs, still the same issue.
It boots up but i dont see anything on the screen, just the battery icon and no signal. it again reboots.
PLEASE HELP ME WITH THIS. I DONT KNOW WHAT TO DO NOW.
If you can post HTC One 802d indian official firmware package, it will be of great great help.!
Also, Please tell me how i can get back to S-ON as i will have to visit service center, i suppose.
Please Help!!
(I am sort of a noob, please don't mind if i sound dumb)
THANK YOU FOR YOUR HELP IN ADVANCE.

i had same problem,
my device keep bootloop after reintsalling stock..
my device HTC one 802D ( indonesia/wwe ) i think the RUU same with indian HTC One DS 802d
anyone can share the RUU ?? please :crying:

dj_rizkycore said:
i had same problem,
my device keep bootloop after reintsalling stock..
my device HTC one 802D ( indonesia/wwe ) i think the RUU same with indian HTC One DS 802d
anyone can share the RUU ?? please :crying:
Click to expand...
Click to collapse
There seems to no RUU for us brother..!
I have searched everywhere. All that is available is Chinese and European RUU only.
Only way left now is to hand it over to HTC Repair.
Please post the stock nandroid back if anyone has. Here is extra info.
version: 0.5
version-bootloader: 2.27.0000
version-baseband: 1.01.32.0917
version-cpld: None
version-microp: None
version-main: 2.23.720.2
version-misc: PVT SHIP S-ON
product: m7cdwg
platform: HBOOT-8064
modelid: PN0751000
cidnum: HTC__038
partition-layout: Generic
security: on
build-mode: SHIP
hbootpreupdate: 11
gencheckpt: 0

initeshx said:
There seems to no RUU for us brother..!
I have searched everywhere. All that is available is Chinese and European RUU only.
Only way left now is to hand it over to HTC Repair.
Please post the stock nandroid back if anyone has. Here is extra info.
version: 0.5
version-bootloader: 2.27.0000
version-baseband: 1.01.32.0917
version-cpld: None
version-microp: None
version-main: 2.23.720.2
version-misc: PVT SHIP S-ON
product: m7cdwg
platform: HBOOT-8064
modelid: PN0751000
cidnum: HTC__038
partition-layout: Generic
security: on
build-mode: SHIP
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
Make S-OFF with rumrunner, make super CID, Install stock Chinese ROM, then you can flash SoulROM it is okay to use with any operator.

suzdalenko said:
Make S-OFF with rumrunner, make super CID, Install stock Chinese ROM, then you can flash SoulROM it is okay to use with any operator.
Click to expand...
Click to collapse
+1 on that

suzdalenko said:
Make S-OFF with rumrunner, make super CID, Install stock Chinese ROM, then you can flash SoulROM it is okay to use with any operator.
Click to expand...
Click to collapse
criszz said:
+1 on that
Click to expand...
Click to collapse
I am already s-off and have done what you have suggested here already. Doesn't work..!!
My condition now is when i restore my stock nandroid backup and reboot the phone. I get the welcome and setup screen. (Radio is gone, so no signal whatsoever)
After i finish setup and get to the homescreen. It doesn't load. I have to tap settings and when i press home back, i see all the icons and everything as it was. The phone stays like that for few seconds and then reboots.
After it reboots, only battery, clock and cellular signals icon are visible and it stays like that for few seconds and reboots again.
Any idea whats going on??

What exactly doesn't work with suggested scheme? Does the phone boot after installing original chinese ROM?

initeshx said:
I am already s-off and have done what you have suggested here already. Doesn't work..!!
My condition now is when i restore my stock nandroid backup and reboot the phone. I get the welcome and setup screen. (Radio is gone, so no signal whatsoever)
After i finish setup and get to the homescreen. It doesn't load. I have to tap settings and when i press home back, i see all the icons and everything as it was. The phone stays like that for few seconds and then reboots.
After it reboots, only battery, clock and cellular signals icon are visible and it stays like that for few seconds and reboots again.
Any idea whats going on??
Click to expand...
Click to collapse
Hello, did you find any resolution yet? I am also stuck with the same issue. :crying:

[Q] Help with SIM unlock AT&T HTC One (paying for help)

Hello,
I recently got HTC One locked to AT&T network and bought code online but it didn't work. I also made sure SIM card was active and had positive amount, not locked by PIN or PUK, phone is not stolen or blacklisted. Did factory reset and tried again but no luck..
First I tried it on stock phone:
- Android 4.1.2,
- Baseband version 4A.14.3250.13_10.33.1150.01L,
- Build number 1.26.502.10 CL166754 release-keys
Then I followed this guide [Tutorial] Root, Unlock, Recovery and flashing a Custom ROM ... unlocked bootloader, flashed CWM recovery, installed stock rooted 1.26.502.15 Android 4.1.2. I did not install custom rom/kernel.
Tried unlocking with code but again, no luck.
After that I followed this guide [GUIDE] How to Return to 100% Stock ... I got S-Off with revone, restored using a RUU.exe, removed Tampered.
Atm this is info from bootloader:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.12
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT34NWxxxxxx
(bootloader) imei: 3544390xxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4183mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
Do I have to relock bootloader and try applying the code again?
Please help me solve this problem. I'm willing to donate 20$, to whoever help me solve problem.
Should I try updating 4.4.2 zip OTA and then applying the code? Will that help anyhow?

Tswigly said:
Hello,
I recently got HTC One locked to AT&T network and bought code online but it didn't work. I also made sure SIM card was active and had positive amount, not locked by PIN or PUK, phone is not stolen or blacklisted. Did factory reset and tried again but no luck..
First I tried it on stock phone:
- Android 4.1.2,
- Baseband version 4A.14.3250.13_10.33.1150.01L,
- Build number 1.26.502.10 CL166754 release-keys
Then I followed this guide [Tutorial] Root, Unlock, Recovery and flashing a Custom ROM ... unlocked bootloader, flashed CWM recovery, installed stock rooted 1.26.502.15 Android 4.1.2. I did not install custom rom/kernel.
Tried unlocking with code but again, no luck.
After that I followed this guide [GUIDE] How to Return to 100% Stock ... I got S-Off with revone, restored using a RUU.exe, removed Tampered.
Atm this is info from bootloader:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.12
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT34NWxxxxxx
(bootloader) imei: 3544390xxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4183mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
Do I have to relock bootloader and try applying the code again?
Please help me solve this problem. I'm willing to donate $$ to whoever help me solve problem.
Should I try updating 4.4.2 zip OTA and then applying the code? Will that help anyhow?
Click to expand...
Click to collapse
Why did you started a new thread? You already have one here with the exact same info...
5. Create a thread or post a message only once.
As a large forum, we don't need unnecessary clutter. You're free to edit your message as you like, so if you do not receive an answer, revisit your message and see if you can describe your problem better. Not everyone is online at the same time so it might take a while before you receive an answer. (Also refer to Rule 16)
Click to expand...
Click to collapse
Unfortunately I'm not familiar with the process of sim-unlocking, but i'm sure you'll receive help soon. You can bump your thread once a day if it get to far in the queu, no need to start additional ones.

alray said:
Why did you started a new thread? You already have one here with the exact same info...
Unfortunately I'm not familiar with the process of sim-unlocking, but i'm sure you'll receive help soon. You can bump your thread once a day if it get to far in the queu, no need to start additional ones.
Click to expand...
Click to collapse
Well I wanted to delete the first thread using the delete/button but it was too late until I realized I can't do that

M7UL firmware repos

I am in the following state on my US AT&T HTC One:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.10
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
And I'm running Maximus HD 42.0.0 (Android 4.4.3 | Sense 6.0) rom. As you can see, I have old firmware but I believe that my phone is otherwise prepared to accept an upgrade (S-OFF, Super CID, etc).
To the point... I would like to update the firmwmare but am a little confused on where to get them. I was thinking Vomer's Guide because he spells out the steps so well, has an organized collection of what's available, and in the guide he mentions:
"Following this guide will allow you to (in this sequence):
- Upgrade to the latest firmware (UL edition) without loosing any data on your SD card" (Emphasis on the UL)
However, many of the download mirrors say they're for M7C_DUG (dual sim) so it would appear they're not actually M7_UL. This inconsistency has me confused. Are these files for M7_UL or M7C_DUG? If not UL, where is an alternate repo for FW for my UL device? I would like to locate ones that do not wipe or require wiping my data which I know is possible because Vomer's Guide states that "SD card will not be wiped using these files".
I would also like to work my way up from my Android 4.1 base to be safe and monitor the transition in increments. i.e. flash "3.xx.401.x then 4.x.401.x then 5.x.401.x then 6.x" as recommended by the very knowledgeable clsA on another forum. So a complete list of FW is preferred.

TXjames said:
I am in the following state on my US AT&T HTC One:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.10
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
And I'm running Maximus HD 42.0.0 (Android 4.4.3 | Sense 6.0) rom. As you can see, I have old firmware but I believe that my phone is otherwise prepared to accept an upgrade (S-OFF, Super CID, etc).
To the point... I would like to update the firmwmare but am a little confused on where to get them. I was thinking Vomer's Guide because he spells out the steps so well, has an organized collection of what's available, and in the guide he mentions:
"Following this guide will allow you to (in this sequence):
- Upgrade to the latest firmware (UL edition) without loosing any data on your SD card" (Emphasis on the UL)
However, many of the download mirrors say they're for M7C_DUG (dual sim) so it would appear they're not actually M7_UL. This inconsistency has me confused. Are these files for M7_UL or M7C_DUG? If not UL, where is an alternate repo for FW for my UL device? I would like to locate ones that do not wipe or require wiping my data which I know is possible because Vomer's Guide states that "SD card will not be wiped using these files".
I would also like to work my way up from my Android 4.1 base to be safe and monitor the transition in increments. i.e. flash "3.xx.401.x then 4.x.401.x then 5.x.401.x then 6.x" as recommended by the very knowledgeable clsA on another forum. So a complete list of FW is preferred.
Click to expand...
Click to collapse
the firmwares in vomers thread are for the m7_u and m7_ul phones, on AFH they are hosted under the Dual-SIM section (can't remember the reason) but are actually for m7_u/ul