[Q] HTC ONE 802D HELP PLZZ!!:crying: - One (M7) Q&A, Help & Troubleshooting

I have a HTC One 802d (m7c_dwg) indian dual sim version..
I have messed it up pretty much.
I am new to XDA forum. Maybe I am not able to search well.
However, when my phone was working perfectly fine and stock it was:
version: 0.5
version-bootloader: 2.27.0000
version-baseband: 1.01.32.0917
version-cpld: None
version-microp: None
version-main: 2.23.720.2
version-misc: PVT SHIP S-ON
product: m7cdwg
platform: HBOOT-8064
modelid: PN0751000
cidnum: HTC__038
partition-layout: Generic
security: on
build-mode: SHIP
hbootpreupdate: 11
gencheckpt: 0
After this I have made a terrible mistake.
I went S-OFF and flashed this RUU. The onl;y RUU.exe i could find.
ruu_m7c_dwg_jb_50_htccn_chs_ct_1.12.1401.1_radio_1237.17.18.0423release_signed
This has changed my hboot, software no., radio everything and i am not able to get any signal on my phone.
After this i upgraded the firmware to
OTA_M7C_DWG_JB_50_S1_HTCCN_CHS_CT_2.40.1401.1-2.36.1401.1_release_339188zxf4sldwhr7k7cw8
MY condition now is:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.27.0000
(bootloader) version-baseband: 2.03.30.1025
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.40.1401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT382MP00013
(bootloader) imei: 357607050351635
(bootloader) meid: A1000037A614ED
(bootloader) product: m7cdwg
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0751000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 4120mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-b78ee36f
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Still of no help. I am not getting any signal even now. Whenever i try to get back to stock via installing Nandroid backup i created when it was stock. It flashes well.
But as soon as it boots. It reboots after few seconds and keeps rebooting like that.:crying:
I dont know now what to do. I have tried flashing soul ROMs, still the same issue.
It boots up but i dont see anything on the screen, just the battery icon and no signal. it again reboots.
PLEASE HELP ME WITH THIS. I DONT KNOW WHAT TO DO NOW.
If you can post HTC One 802d indian official firmware package, it will be of great great help.!
Also, Please tell me how i can get back to S-ON as i will have to visit service center, i suppose.
Please Help!!
(I am sort of a noob, please don't mind if i sound dumb)
THANK YOU FOR YOUR HELP IN ADVANCE.

i had same problem,
my device keep bootloop after reintsalling stock..
my device HTC one 802D ( indonesia/wwe ) i think the RUU same with indian HTC One DS 802d
anyone can share the RUU ?? please :crying:

dj_rizkycore said:
i had same problem,
my device keep bootloop after reintsalling stock..
my device HTC one 802D ( indonesia/wwe ) i think the RUU same with indian HTC One DS 802d
anyone can share the RUU ?? please :crying:
Click to expand...
Click to collapse
There seems to no RUU for us brother..!
I have searched everywhere. All that is available is Chinese and European RUU only.
Only way left now is to hand it over to HTC Repair.
Please post the stock nandroid back if anyone has. Here is extra info.
version: 0.5
version-bootloader: 2.27.0000
version-baseband: 1.01.32.0917
version-cpld: None
version-microp: None
version-main: 2.23.720.2
version-misc: PVT SHIP S-ON
product: m7cdwg
platform: HBOOT-8064
modelid: PN0751000
cidnum: HTC__038
partition-layout: Generic
security: on
build-mode: SHIP
hbootpreupdate: 11
gencheckpt: 0

initeshx said:
There seems to no RUU for us brother..!
I have searched everywhere. All that is available is Chinese and European RUU only.
Only way left now is to hand it over to HTC Repair.
Please post the stock nandroid back if anyone has. Here is extra info.
version: 0.5
version-bootloader: 2.27.0000
version-baseband: 1.01.32.0917
version-cpld: None
version-microp: None
version-main: 2.23.720.2
version-misc: PVT SHIP S-ON
product: m7cdwg
platform: HBOOT-8064
modelid: PN0751000
cidnum: HTC__038
partition-layout: Generic
security: on
build-mode: SHIP
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
Make S-OFF with rumrunner, make super CID, Install stock Chinese ROM, then you can flash SoulROM it is okay to use with any operator.

suzdalenko said:
Make S-OFF with rumrunner, make super CID, Install stock Chinese ROM, then you can flash SoulROM it is okay to use with any operator.
Click to expand...
Click to collapse
+1 on that

suzdalenko said:
Make S-OFF with rumrunner, make super CID, Install stock Chinese ROM, then you can flash SoulROM it is okay to use with any operator.
Click to expand...
Click to collapse
criszz said:
+1 on that
Click to expand...
Click to collapse
I am already s-off and have done what you have suggested here already. Doesn't work..!!
My condition now is when i restore my stock nandroid backup and reboot the phone. I get the welcome and setup screen. (Radio is gone, so no signal whatsoever)
After i finish setup and get to the homescreen. It doesn't load. I have to tap settings and when i press home back, i see all the icons and everything as it was. The phone stays like that for few seconds and then reboots.
After it reboots, only battery, clock and cellular signals icon are visible and it stays like that for few seconds and reboots again.
Any idea whats going on??

What exactly doesn't work with suggested scheme? Does the phone boot after installing original chinese ROM?

initeshx said:
I am already s-off and have done what you have suggested here already. Doesn't work..!!
My condition now is when i restore my stock nandroid backup and reboot the phone. I get the welcome and setup screen. (Radio is gone, so no signal whatsoever)
After i finish setup and get to the homescreen. It doesn't load. I have to tap settings and when i press home back, i see all the icons and everything as it was. The phone stays like that for few seconds and then reboots.
After it reboots, only battery, clock and cellular signals icon are visible and it stays like that for few seconds and reboots again.
Any idea whats going on??
Click to expand...
Click to collapse
Hello, did you find any resolution yet? I am also stuck with the same issue. :crying:

Related

[Q] Htc One Telecom Italia Mobile Rom

i'm sorry if it's wrong section, but i don't know where i can post one similar thread.
i have htc one tim(now unbranded) and i speaking to all you, xda comunity, if some one have a stock ruu for this phone or a backup can you post it here please? or update it somewhere? Thanks
p.s. i'm sorry for my english
ATM there isn't any ruu for TIM.
Which is your version main?
3.63.901.2 is now released by tim(so i wish go back to stock)
i was on 4.2.2 and i did nandroid backup(for get the stock back one time...) but afrer first flash it was deleted from the phone T_T(stupid me)
now i have 3.62.401.1(but in fastboot the field is blank), s-off and super cid. but i wanna be stock(branded or unbranded is the same but stock) for getting updates via ota
but i'm no sure that i can keep another cid(htc__001 for example) and go on stock s-on lock
p.s. version of firmware was 2.24.901.1 and the kernel is available on htcdev but i dont know what to do with that zipped file
p.p.s. sorry for my bad english
https://drive.google.com/folderview?id=0BzAxVcJ9UmabVnlDZW1qSjJiMW8&usp=sharing i found TWRP backup of 2.24.901.1
by the way, now im trying to do something with http://forum.xda-developers.com/showthread.php?t=1994705 this i hope i can restore mine recovery. but if no it's good anyway
solved, i just changed my cid to htc__405 > installed Ruu HTC Europe 1.28.401.7 > full lock > remove revolt. No red warnings, no brand, full stock locked phone(without any logos of tim in soft and on back) and it receives ota without any error(i dont know if i'll send it to htc they will repair it, just hope that i dont need them)
Hello Guys, Please can somebody help me upload a nanodroid backup(TWRP) of HTC ONE M7 cid: TIM__401, my phone just started randomly rebooting,so i factory reset it but still it keeps messing up,so i decided to root it and install CM11 which happen to work well but there is a catch, I lost my IMEI NO, so i can't connect to mobile network. I tried almost everything including:
#Running RUU.exe
#Guru's Reset method
#Flashing Stock Rom.zip
#Flashing different custom roms
etc etc....
this is my phone status:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH35EW904090
(bootloader) imei: 354436056744087
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: TIM__401
(bootloader) battery-status: good
(bootloader) battery-voltage: 4146mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e5f7432d
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
pls can anybody can help?

[Q] Random reboots/shut downs

Hello,
I have a problem with my m7 that several times a day restart or shut down and some times only starts again with the powerbutton for 10sec. Can I find log files anywhere to see what that is?
Besides reboots, I feel that everything is working fine fine.
Configuration are:
KitKat, ViperOne 4.3.0, fw_4.19.401.8, ElementalX-m7-10.10.1.
Version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.23.3263.28
version-cpld: None
version-MicroP: None
version-main: 4.19.401.8
version-misc: PVT SHIP S-OFF
SerialNo: XXXX
imei: XXXX
MEID: 00000000000000
product: m7_ul
Platform: HBOOT-8064
modelid: PN0710000
cidnum: 11111111
battery-status: good
battery-voltage: 4044mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FAST BOOT
commitno-bootloader: dirty-4dab9d12
hbootpreupdate: 11
gencheckpt: 0
bebbej said:
Hello,
I have a problem with my m7 that several times a day restart or shut down and some times only starts again with the powerbutton for 10sec. Can I find log files anywhere to see what that is?
Besides reboots, I feel that everything is working fine fine.
Configuration are:
KitKat, ViperOne 4.3.0, fw_4.19.401.8, ElementalX-m7-10.10.1.
Version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.23.3263.28
version-cpld: None
version-MicroP: None
version-main: 4.19.401.8
version-misc: PVT SHIP S-OFF
SerialNo: XXXX
imei: XXXX
MEID: 00000000000000
product: m7_ul
Platform: HBOOT-8064
modelid: PN0710000
cidnum: 11111111
battery-status: good
battery-voltage: 4044mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FAST BOOT
commitno-bootloader: dirty-4dab9d12
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
Between ViperOne and ElementalX, that's a lot of settings to deal with, anything could go wrong. I would put my Phone back to stock and see if the problem persists. If the problem goes away Start over and make note of all the custom settings you choose.
The logcat can be collected from recovery using adb
as soon as the phone reboots/shuts down go into recovery and from your adb/fastboot directory type adb logcat -d > logcat.txt
bebbej said:
Hello,
I have a problem with my m7 that several times a day restart or shut down and some times only starts again with the powerbutton for 10sec. Can I find log files anywhere to see what that is?
Besides reboots, I feel that everything is working fine fine.
Configuration are:
KitKat, ViperOne 4.3.0, fw_4.19.401.8, ElementalX-m7-10.10.1.
Version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.23.3263.28
version-cpld: None
version-MicroP: None
version-main: 4.19.401.8
version-misc: PVT SHIP S-OFF
SerialNo: XXXX
imei: XXXX
MEID: 00000000000000
product: m7_ul
Platform: HBOOT-8064
modelid: PN0710000
cidnum: 11111111
battery-status: good
battery-voltage: 4044mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FAST BOOT
commitno-bootloader: dirty-4dab9d12
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
have you overclocked or undervolted something with that elementalx?
If yes, that's the problem.
Uxepro said:
have you overclocked or undervolted something with that elementalx?
If yes, that's the problem.
Click to expand...
Click to collapse
I had a slight undervolt and has now got back to stockvalues.
Thanx! Lets see if it helps.
clsA said:
Between ViperOne and ElementalX, that's a lot of settings to deal with, anything could go wrong. I would put my Phone back to stock and see if the problem persists. If the problem goes away Start over and make note of all the custom settings you choose.
The logcat can be collected from recovery using adb
as soon as the phone reboots/shuts down go into recovery and from your adb/fastboot directory type adb logcat -d > logcat.txt
Click to expand...
Click to collapse
Guess a lot of things can go wrong with all that. Gonna wait for ViperOne 5 and try the latest ElementalX before going back to stock.
Didnt understand anything of the logfile. But thanx for instructions. :good:
Decrypt logcat
As mentioned I have a problem with random reboots several times a day. Posting a logcat and hope to get some help decrypting it.
is it the same on stock firmware?
SaHiLzZ said:
is it the same on stock firmware?
Click to expand...
Click to collapse
Yes, it is. Never reboots while charging though....
what this type of things happens to me i stick to the basics.. redownload rom make sure it was a good download.. fresh install wipe everything cache,davlik,data.. install rom full wipe on aroma options.. then run the rom as it is maybe a halfday check if the problem is still there.. if everything is ok no reboots or whatnot after halfday or better the whole day then flash the custom kernel.. without any overclocks or undervolt.. usually this method finds the real culprit..

[Q] M7 stuck in boot loop after running RUU.exe

Hello everybody, hope everyone is having a better day than I am. I will try to keep this short but I am more than happy to provide more details as they are needed.
I picked up a replacement HTC One (ATT) after a warranty claim for a bad speaker and I immediately rooted it. After rooting the phone and before flashing a custom rom it started rebooting itself every couple of minutes. I went ahead and flashed a custom rom (many to be honest) and the phone booted up just fine, however, the phone would not recognize the sim card. I tried the sim card in a different phone and it worked fine. Then, with the sim card replaced, all of a sudden the phone worked for about 30 minutes. After that it started rebooting itself at will every couple of minutes. I decided that i must have flashed a bad file or something so i decided to go back to stock with RUU.exe. I locked the bootloader and ran the .exe from my laptop (windows 7) Now my phone i "relocked" and the RUU flashed a recovery that I can not get into. My boot screen now reads this
***relocked***
M7_UL PVT SHIP S-ON RH
HBOOT-1.55.0000
RADIO-4A.19.3263.13
OpenDSP-v31.120.274.0617
OS-3.17.502.3
eMMC-boot 2048MB
(date and time)
this is the RUU.exe I loaded
RUU M7 UL JB43 SENSE50 MR Cingular US 3.17.502.3 Radio 4A.19.3263.13 10.38j.1157.04 Release 334235 Signed 2 - HTC1Guru
Now when I start my phone it loads to the ATT screen with the globe, sometimes plays the chim, and then goes to a white screen with the green HTC. after about a minute it reboots and loads to the exact same spot. It will do this until I enter the bootloader and power it down
I don't know what to do anymore as I have read about a thousand threads and I am getting confused on what the next step should be. I would greatly appreciate a point in the right direction.
Although the POS phone I am using with a modified sim card holder is pretty awesome
Thanks in advance
Get ATT to replace to it again?
there is more back story that I did not go into and i don't know if I can get it replaced again.
Now when I turn on the phone it loads to the initial start up screen where it ask to set up my account and set up wifi. but agian after a minute or so it just reboots and loads to about the same spot and then restarts.
I still think this is fixable
Can anyone point me in the right direction?
Thanks
What software version are you on now? I'm not near a computer but my first thought is that because you are s-on, you can not run an RUU that is older than your current version. So if you are on KitKat now, you can't run a Jelly bean 4.3 ruu.
You would need to be s-off in order to do that.
Sent from my HTC One using Tapatalk
to tell you the truth I don't know anymore because i have tried to load so many different things, how can I tell for sure?
another question...Now that I have a relocked bootloader can I try to rerun the RUU.exe file? I will check my getvar this evening to find the correct RUU but just don't know if this will work with a locked bootloader and no recovery.
redraider25 said:
another question...Now that I have a relocked bootloader can I try to rerun the RUU.exe file? I will check my getvar this evening to find the correct RUU but just don't know if this will work with a locked bootloader and no recovery.
Click to expand...
Click to collapse
Sure will work as long as RUU is same level as your phone
I would try re-running the RUU. Sometimes they don't do everything correctly. But done right, it should wipe your phone of any custom software and take you back to clean stock.
Finally made it back home I wanted to post my getvar all so please tell me if you see something bad
c:\miniadb_m7>adb devices
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.19.3263.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.17.502.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4062mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-2da61e5e88
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Please advise me if I should still rerun the RUU.exe file above or do I need to do something different first
Well it looks like you are on 3.17 and the Ruu is 3.17 so give it a shot.
Sent from my HTC One using Tapatalk
redraider25 said:
Finally made it back home I wanted to post my getvar all so please tell me if you see something bad
c:\miniadb_m7>adb devices
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.19.3263.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.17.502.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4062mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-2da61e5e88
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Please advise me if I should still rerun the RUU.exe file above or do I need to do something different first
Click to expand...
Click to collapse
What about factory reset from bootloader?
42 22435958
Well I tried to RUU.exe again and now the phone will load to the setup. I went through that, but it is not recognizing my sim card. I can sign on to wifi which works and I can navigate the homescreens. after about 2 minutes the phone reboots itself and the whole cycle happens again. i tried to do a software update but with out the sim card being recognized it says Network not available. the signal bar has an "X" and it does not recognize when I try to remove the sim card to reposition it.
should I try a different RUU.exe file? Thanks for all the help, I think we are getting close. One thing I think is strange is when I ran getvar all, it has a strange line I noted it below. Anybody know what this means?
c:\miniadb_m7>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.19.3263.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.17.502.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4062mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-2da61e5e88 THIS LINE HERE!!!!!!!!!!!!!!!!!!!!!!!!!
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Thanks in advance
While the phone is up, can you go to settings > about devices > hardware info> baseband.. is it empty?
The baseband says "unknown"
redraider25 said:
The baseband says "unknown"
Click to expand...
Click to collapse
Its dead Jim.
SaHiLzZ said:
Its dead Jim.
Click to expand...
Click to collapse
really, thats it? No mas htc one for me?
So am I the proud owner of a BRICK?

stuck in recovery with s-on

hi trying the going back to stock with ruu installation and give me an error. some diggin i found that i use the wrong ruu after that im back to s-on and for some reason any custom rom that i installed cant get pass the boot screen
now ı cant find the right ruu any where on the net
thats my phones getvar
version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.25.3263.21
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
serialno:
imei:
meid: 00000000000000
product: m7_u
platform: HBOOT-8064
modelid: PN0711000
cidnum: HTC__M27
battery-status: good
battery-voltage: 4300mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: RUU
commitno-bootloader: dirty-c6bbb6d4
hbootpreupdate: 11
gencheckpt: 0
Press and hold the power button, you will eventually start up. WHY DID YOU S-ON??
phone is working fine until the boot screen came up and endless loding
turned back because i might sending to varanty
huan_mb said:
phone is working fine until the boot screen came up and endless loding
turned back because i might sending to varanty
Click to expand...
Click to collapse
Post a screenshot of your bootloader. What steps have you tried to get back to stock.. links to RUU's etc please
Sent from my HTC One using Xparent Skyblue Tapatalk 2
solved
after formating the sdcard custom rom just work fine

Htc M7 no inicia ayuda

please help my phone does not pass the logo of Android, can put a custom , but if I touch something restart or eh aid could put a ruu
S -on unloked , hboot 1.56
DiegoJhosue said:
please help my phone does not pass the logo of Android, can put a custom , but if I touch something restart or eh aid could put a ruu
S -on unloked , hboot 1.56
Click to expand...
Click to collapse
please post the output of "fastboot getvar all" (remove imei/sn)
already asked the same thing here btw
and you didn't replied...
sorry did not see in time , here my information
version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.23.3263.28
version-cpld: None
version-microp: None
version-main: 4.19.631.9
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0712000
cidnum: ROGER001
battery-status: good
battery-voltage: 3858mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4dab9d12
hbootpreupdate: 11
gencheckpt: 0
DiegoJhosue said:
sorry did not see in time , here my information
version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.23.3263.28
version-cpld: None
version-microp: None
version-main: 4.19.631.9
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0712000
cidnum: ROGER001
battery-status: good
battery-voltage: 3858mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4dab9d12
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
Relock your bootloader:
Code:
fastboot oem lock
then flash this RUU
http://www.htc1guru.com/2014/03/rogers-android-ruu/
ok thanks downloading , but not back to factory recovery?
DiegoJhosue said:
ok thanks downloading , but not back to factory recovery?
Click to expand...
Click to collapse
The RUU will reset your phone back to stock
thanks friend one last question I install in fastboot mode or RUU
thank you very much friend I could relive my phone I have two major problems
1- serves no wifi or bt
2- if I turn off the phone will not turn back until discharge and charging from 0%
DiegoJhosue said:
thank you very much friend I could relive my phone I have two major problems
1- serves no wifi or bt
2- if I turn off the phone will not turn back until discharge and charging from 0%
Click to expand...
Click to collapse
Looks like you have an hardware problem. Flashing a RUU should fix any software or firmware issue so its most likely the hardware.
OK thanks very much my fone went sat
Enviado desde mi SM-G900F mediante Tapatalk

Categories

Resources