[Q] S1 slow after upgrading to JB - Galaxy S I9000 Q&A, Help & Troubleshooting

S1 Dead slow upgrading to 4.2
Anybody pls help what to do downgrade iam using Mackey 4.2.2

kk258 said:
S1 Dead slow upgrading to 4.2
Anybody pls help what to do downgrade iam using Mackey 4.2.2
Click to expand...
Click to collapse
http://androidadvices.com/firmware-upgrade-downgrade-steps-for-galaxy-s-i9000-version/
That's what I found , it says in the lower page how to gowngrade. But also , try flashing another rom , I tried a lot of roms with 4.2.2 on my i9000 and none was laggy , also try this : http://forum.xda-developers.com/showthread.php?t=2273317
EDIT: Download i9000 firmware from http://www.sammobile.com/firmwares/ and flash with Odin.

Related

new bee needs help upgrading roms

my i9000 international running on firmware 2.2.1 ,how do i go about it to upgrade to gingerbread by darkyy or galaxian roms ?
Please advice ,thank you .
Firstly upgrade. To 2.3.4. Go to samfirmware.com make an account and follow basic guide instructions to upgrade to 2.3.4!
i did but fail using kies ,no respond from software.Using update from phone said no update available .
firmware version 2.2.1
baseband version i9000zsjpg
kernel version 2.6.32.9([email protected]#1
build number froyo.zsjpk
mccm said:
my i9000 international running on firmware 2.2.1 ,how do i go about it to upgrade to gingerbread by darkyy or galaxian roms ?
Please advice ,thank you .
Click to expand...
Click to collapse
Hi,
Check out this link (GingerReal - V7.1.4 JVQ) It has clear instructions how to flash a custom rom and all the downloads.
Here is another link (Martux ROM V3) as well, with JVR base rom link
Hope this helps you
okok ,i manage to upgrade to 2.3.3 ,which developer roms are the best at present ?
Thank you for your time
mccm said:
okok ,i manage to upgrade to 2.3.3 ,which developer roms are the best at present ?
Thank you for your time
Click to expand...
Click to collapse
Dude, upgrade it to 2.3.4 (via Odin), then flash a custom rom
Dfolt said:
Dude, upgrade it to 2.3.4 (via Odin), then flash a custom rom
Click to expand...
Click to collapse
sir,sorry to mention im using asia firmware that doesnt have 2.3.4.
thank you

[Q] Flash GB on JB

Hi,
I have my Galaxy S advanced. (GT-I9070)
A few weeks ago i flashed Android 4.1.2 using odin. JB
I got the software i flashed from samsung-updates.com
But my phone gets laggy and now want Gingerbread back.
When i trie to flash a 2.3.6 software back also from samsung-updates.com my phone get stuck at the boot logo
I have done a factory reset.
Now i have a kernel with a recovery build in (TWRP).
So my question is is it possible to flash Advanced-stock rom back as a zip file? Link here
if not possible how can i get my 2.3.6 software back ?
thanks!
Одг: [Q] Flash GB on JB
roboneter said:
Hi,
I have my Galaxy S advanced. (GT-I9070)
A few weeks ago i flashed Android 4.1.2 using odin. JB
I got the software i flashed from samsung-updates.com
But my phone gets laggy and now want Gingerbread back.
When i trie to flash a 2.3.6 software back also from samsung-updates.com my phone get stuck at the boot logo
I have done a factory reset.
Now i have a kernel with a recovery build in (TWRP).
So my question is is it possible to flash Advanced-stock rom back as a zip file? Link here
if not possible how can i get my 2.3.6 software back ?
thanks!
Click to expand...
Click to collapse
You have guide how to downgrade. And it is sticky. http://forum.xda-developers.com/showthread.php?t=2100642
It is easyer to make new thread, than to look for it.
Sent from Galaxy S Advance
Why dont you post in the existing thread?
Sent from my GT-I9070 using xda premium
shut_down said:
You have guide how to downgrade. And it is sticky. http://forum.xda-developers.com/showthread.php?t=2100642
It is easyer to make new thread, than to look for it.
Sent from Galaxy S Advance
Click to expand...
Click to collapse
Thanks a lot ! i wil try it tomorrow!

[Q]How to updrade from GB to JB XXMC8

i tried to upgrade From GB to JB via ODIN
JB I8160XXMC8 from samsung-updates.com
doesn't contain pit file
the phone bricked it restarts before bootscreen animation
any help plz ?
Master-ZizO said:
i tried to upgrade From GB to JB via ODIN
JB I8160XXMC8 from samsung-updates.com
doesn't contain pit file
the phone bricked it restarts before bootscreen animation
any help plz ?
Click to expand...
Click to collapse
install leaked mb2 and then mc8..
mkel91 said:
install leaked mb2 and then mc8..
Click to expand...
Click to collapse
MB2 or MB4 is it ok ? Or Just MB2 ?
hy,
for installing the new jelly firmware for i8160 please follow next step:
1. flash first firmware jelly bean I8160_OXAMB2, like in this link:
http://www.youtube.com/watch?v=2LZqCD3-Ytk
2. then flash the last firmware jelly bean I8160XXMC8
Thank u all...
problem solved after flashing MB4 or MB2 then Going to MC8
baseband unknow
flashing stopped on "nand write" while flash mb2 or mb4.
if flashing mc8 directly from gb stock rom region hongkong success..
but baseband unknow.
Try flash back to gb stock different region still baseband unknow..
Now i flash gb stock region hk, and back normal again..
How should i do?thank u.
For a moment I thought I wasn't browsing on the ace forums....! Had to check back... Please post on the right forums peeps.
Sent from my GT-Xperia S using xda premium

[Q] Lost Phone Signal on Flashing ROM

Hi Guys,
Since I am new, I cannot post on the development groups. I was installing a ROM on my friend's S Advance. Whenever I flash a ROM, I am able to install everything properly but I have lost my mobile signal completely . I cannot make calls or send messages, the SIM works fine on other phones. What could be the problem here?
In Phone Status, it shows :
Network : Unknown
Signal strength : 0 dBm 99asu
Mobile Network Type : Unknown:0
Service Status : Radio Off
I have an Indian version of the phone, Baseband : i9070DDLK2
I tried looking for Radio files to Flash, but cannot seem to find it anywhere on XDA,
Please please help me out. Thank You so much for reading. Please let me know how to make it work.
What ROM did you flash?
szzlgupta said:
What ROM did you flash?
Click to expand...
Click to collapse
Flashed this ROM :
http://forum.xda-developers.com/showthread.php?t=2324100
I tried flashing a few other ROMs too. Same issue with them.
NOOOOO
These roms can be flashed ONLY over JB 4.1.2 firmware! You have GB.
Please first upgrade to JB and then flash this rom!
szzlgupta said:
NOOOOO
These roms can be flashed ONLY over JB 4.1.2 firmware! You have GB.
Please first upgrade to JB and then flash this rom!
Click to expand...
Click to collapse
Whoah! Okay
I tried flashing a stock firmware over ODIN from a link with stock firmware files. Phone went into a bootloop. Could you please forward me to a link with the firmware I should flash? Thanks
Did you make a factory clean? It will boot up!
szzlgupta said:
Did you make a factory clean? It will boot up!
Click to expand...
Click to collapse
Yes. Factory reset in recovery then rebooted in download mode and flashed via Odin
What FW did you flash? 2.3.6 or 4.1.2 ?
szzlgupta said:
What FW did you flash? 2.3.6 or 4.1.2 ?
Click to expand...
Click to collapse
I tried flashing this :
I9070DDULP8_ODDULP8_India_Android_4.1.2 Since the following were the only 2 available for India on the XDA links and the others I found, I thought I'd give it a try :
REGION: INU (India) | PDA: I9070DDLJ1 | CSC: I9070DDLJ1
DOWNLOAD
REGION: INU (India) | PDA: I9070DDLI1 | CSC: I9070DDLD4
DOWNLOAD
Click to expand...
Click to collapse
Then I figured out it won't work for i9070DDLK2 so I'm trying to reflash to stock 2.3.6
If you know where I could find a 4.1.2 link for i9070DDLK2, do let me know. I'd be grateful
No.. ddlk2 is 2.3.6 and ddulp8 is 4.1.2
First u need to flash ddlk2 which is 2.3.6 and then flash ddulp8 which is 4.1.2!
szzlgupta said:
No.. ddlk2 is 2.3.6 and ddulp8 is 4.1.2
First u need to flash ddlk2 which is 2.3.6 and then flash ddulp8 which is 4.1.2!
Click to expand...
Click to collapse
Okay. Thanks for clarifying. All these baseband versions on Samsung have me thoroughly confused.
I am pretty new to Samsung devices when it comes to rooting. Really appreciate you clarifying it.
Actually I had jumped from Firmware 2.3.6 to a custom ROM on 4.2.2 and then tried jumping back to Firmware 4.1.2 and hence the bootloop was occurring. (It's kind of making some sense now )
Thank you so much for clarifying, didn't read it clearly on blogs I guess, my bad. Firmware 2.3.6 is on download. I'll do a clean install of the firmware on ODIN and then try 4.1.2 and then custom ROMs. Thanks
Yes. And don't need to say 'Thanks', just HIT it!

[Q] If update official update from different country will baseband change?

Hello guys, i will explain the story in order, sorry for my bad Grammar.
first i have the official GTI9070 but i forgot the baseband (GB)
then i accept software update that appear in notification bar, my baseband become I9070DXLK2 (GB)
and i see there's CM11 out that can make kit kat running in I9070.
but it requires root to install CMW / TWRP..
so hard to find root zip for DXLK2, and then i found one full ROM rooted then flash it with odin.
my baseband still I9070 (GB) but rooted (binary counter++)
after that i flash TWRP with odin too.
then i try flashing CM11 with TWRP.
it success, but no mobile network.
i search at this forum and someone say "no mobile network happen because flashing from GB (2.3.x) directly to KK (4.4.x)"
he said first update from GB to official samsung JB.
the problem, there's no official samsung JB update for my country/region (DXLK2)
my question, if i flash the official samsung JB update from other region.. let say it italy.. will my baseband change?
if it changed, what's the problem and whats the negative impact? what should i do better?
thx in advance.
PS: my device is Samsung Galaxy S Advance GT-I9070 (Indonesian)
amaDetoir said:
my question, if i flash the official samsung JB update from other region.. let say it italy.. will my baseband change?
if it changed, what's the problem and whats the negative impact? what should i do better?
thx in advance.
Click to expand...
Click to collapse
You don't have any negative impact if you flash any stock JB firmware, only with your warranty if you still have one.
Please, follow this guide from point A (JELLYBEANIZATION): [GUIDE] From stock GB to Custom JB (Noob-friendly)
After you updgraded to JB, ask/read some tutorials linked here: [{INDEX of GUIDES/TUTORIALS}] Galaxy S Advance [GT-I9070].
Be sure when you proceed to do something OR ASK before, NOT AFTER you doing something wrong.
R_a_z_v_a_n said:
You don't have any negative impact if you flash any stock JB firmware, only with your warranty if you still have one.
Please, follow this guide from point A (JELLYBEANIZATION): [GUIDE] From stock GB to Custom JB (Noob-friendly)
After you updgraded to JB, ask/read some tutorials linked here: [{INDEX of GUIDES/TUTORIALS}] Galaxy S Advance [GT-I9070].
Be sure when you proceed to do something OR ASK before, NOT AFTER you doing something wrong.
Click to expand...
Click to collapse
thank you for the response.
i'll tell the result later after i can download it, at my office the download link show 404 Not Found (maybe blocked)
Search JB on www.samsung-updates.com.
Powered by CM11
amaDetoir said:
thank you for the response.
i'll tell the result later after i can download it, at my office the download link show 404 Not Found (maybe blocked)
Click to expand...
Click to collapse
Or maybe removed. Try on samsung-updates.com or sammobile.com
In Canada, have XXLK2 (Africa?). Want JB, use UK version?
I bought my unlocked I9070 almost 2 years ago and am thinking about upgrading to Android 4.1.2 (JB).
On samsung-updates there appear to be lots of JB versions for different regions.
Can I just select the one for Britain (XXLQE)? Is there anything I need to check re: compatibility?
coghlan said:
I bought my unlocked I9070 almost 2 years ago and am thinking about upgrading to Android 4.1.2 (JB).
On samsung-updates there appear to be lots of JB versions for different regions.
Can I just select the one for Britain (XXLQE)? Is there anything I need to check re: compatibility?
Click to expand...
Click to collapse
Yes you can flash any stock firmware for I9070. Be sure you don't flash firmware for I9070P.
Powered by CM11 M11 snapshot
Flashing worked...once I found a .zip file
R_a_z_v_a_n said:
Yes you can flash any stock firmware for I9070. Be sure you don't flash firmware for I9070P.
Powered by CM11 M11 snapshot
Click to expand...
Click to collapse
I had a lot of trouble trying to get the samsung-updates.com download to work (used the free one, which either didn't start most of the time or died during download). Eventually, I took the filename (for Britain) and Googled it, and found a download site that let me download it (required 3 hours).
Armed with the .zip file and ODLIN, it worked like a charm. All my installed apps and data survived, which surprised me. I thought this would be a vanilla install.

Categories

Resources