Database Develop

[Q] Soft bricked phone need help

This was my first flash and here is my noob story. I flashed a custom rom last night and didn't like it. When I went to flash it back to stock I did not properly disable voodoo lagfix and it froze on odin. I pulled the battery and ended up with the triangle and computer signs. It is a 1008 series so 3 button doesn't work although I can access download mode with a Jig. According to the Voodoo site this can be repaired by "Re-installing Voodoo by flashing the Kernel with Odin: Your ext4 data will be back if the previous procedure didn’t format DATA partition, or Starting into recovery and wipe data. Warning, like it says, you’ll loose your personal data. If you don’t have backup, use this option in last resort." My question is how do I flash just the kernel with Odin? I currently have Odin 1 click and realize this isn't the proper program. Any help would be appreciated.

Killerfish1450 said:
This was my first flash and here is my noob story. I flashed a custom rom last night and didn't like it. When I went to flash it back to stock I did not properly disable voodoo lagfix and it froze on odin. I pulled the battery and ended up with the triangle and computer signs. It is a 1008 series so 3 button doesn't work although I can access download mode with a Jig. According to the Voodoo site this can be repaired by "Re-installing Voodoo by flashing the Kernel with Odin: Your ext4 data will be back if the previous procedure didn’t format DATA partition, or Starting into recovery and wipe data. Warning, like it says, you’ll loose your personal data. If you don’t have backup, use this option in last resort." My question is how do I flash just the kernel with Odin? I currently have Odin 1 click and realize this isn't the proper program. Any help would be appreciated.
Click to expand...
Click to collapse
If its Odin one click then you don't need to disable voodoo. Try again? How long did you wait?
Don't do all that kernel stuff... u probably lost some data when you unplugged the phone... just re-do the whole flash with a ROM
Sent from my SGH-I897 using XDA App

Is there a way I can just reflash the custom rom I had installed without having to go back to stock then use CWM to do it? Is there a way to get into recovery mode instead of download mode? ADB says there is no device connected so i cant use that.

If you still have the rom zip on your internal sd you can reflash that in clockwork recovery and see if it works.

[Q] Galaxy S hangs on bootscreen, no recovery mode after flashing

Hi,
I recently flashed a new rom (ultimate galaxy s v.7) from xda, and I flashed it via clockwork.
clockwork installed it and I rebooted, and it seemed to hang on the lockscreen for an abnormally long amount of time.
when i take the battery out and try to boot into recovery mode, it flashes to black then shows the galaxy s boot again.
previous to flashing this rom i have cleared the cache and all data on the phone. i have a nandroid backup so if i could get back to clockwork recovery this would be helpful.
also previous to flashing this rom i had a 3 UK rom which i installed by accident via kies, running 2.1...this rom seemed to be quite resistant to installing another rom from kies.
help would be MUCH appreciated...
thanks in advance

so recovery mode isnt an option then ?
What about Download mode ?

Hi,
Download mode worked before.
I have now managed by some miracle to get into recovery mode and now have gained options about a speedmod universal lagfix.
Is this associated with clockwork / ultimate 7.0 rom / a sign that the rom has installed in some form, and should i reboot, or should i now do a nandroid back to the rom i had before?

I believe speedmod uses CWM, so you can just do the rollback to your previous rom

nwsk said:
I believe speedmod uses CWM, so you can just do the rollback to your previous rom
Click to expand...
Click to collapse
however would it be safe to reboot, as i'm currently in recovery mode and considering to do a nandroid OR alternatively reboot and see if the new rom starts up..

well u cant leave it in recovery mode forever lol, reboot it, if it doesnt come on, try recovery mode again or just flash another ROM thru ODIN

ok. how long do you think is a reasonable time to wait before concluding that the rom doesn't work and I should nandroid back to my old rom...?

Half an hour gives plenty of time .
jje

what would be the reason that it hangs on the galaxy s bootscreen?

could be anything.... installing process not completed properly. best to just re flash .

azzledazzle said:
could be anything.... installing process not completed properly. best to just re flash .
Click to expand...
Click to collapse
do you mean recover via nandroid or reflash the same rom, then leave it?

choice is yours, ive never restored using nandroid so dunno what its like. but try it first, if no success re flash using odin. u will lose all your data

CWM - full wipe / nandroid problem

2 days ago I had to reinstal system on my Note. I decided to flash stock GB rom using odin with re-partition (SGN 16bg pit file). After that I flashed once again using stock GB rooted rom, and install CF kernel with CWM using mobile odin. Everything was fine. Next I installed a cooked rom (CleaNote v5, ). I thought that everything is fine till i decided to install TouchwixUX Launcher prepared to Note. The instalation process stucks on about 20%, I thought that maybe package is corrupted, I downloaded it again, but it didn't help, so I decided backup my phone using nandroid and wipe to factory data. And there is a problem:
1. I try to make a backup using nandroid, and it stops on some *.txt file and stucks. (backup include 3 files)
2. I can't do the wipe. I launched full wipe and nandroid returned a message "can't open /SDCARD/.amndroid_secure ..."
3. When I try to mount SDCARD, CWM Recovery show's the message "Cant mount SDCARD"
There is a one thing which make me sad. I tried to install CleaNote .zip by CWM Recovery once again, and instaltion process stucks to. It means that i probably wont be able to flash any other rom.
Is there any way to solve this problem?

Pre100n said:
2 days ago I had to reinstal system on my Note. I decided to flash stock GB rom using odin with re-partition (SGN 16bg pit file). After that I flashed once again using stock GB rooted rom, and install CF kernel with CWM using mobile odin. Everything was fine. Next I installed a cooked rom (CleaNote v5, ). I thought that everything is fine till i decided to install TouchwixUX Launcher prepared to Note. The instalation process stucks on about 20%, I thought that maybe package is corrupted, I downloaded it again, but it didn't help, so I decided backup my phone using nandroid and wipe to factory data. And there is a problem:
1. I try to make a backup using nandroid, and it stops on some *.txt file and stucks. (backup include 3 files)
2. I can't do the wipe. I launched full wipe and nandroid returned a message "can't open /SDCARD/.amndroid_secure ..."
3. When I try to mount SDCARD, CWM Recovery show's the message "Cant mount SDCARD"
There is a one thing which make me sad. I tried to install CleaNote .zip by CWM Recovery once again, and instaltion process stucks to. It means that i probably wont be able to flash any other rom.
Is there any way to solve this problem?
Click to expand...
Click to collapse
Can you go download mode and flash gb rom in pc odin? After flashing gb rom in pc odin if still stuck go to recovery and wipe data and cache.
The way you explained it i dont believe it is superbrick.

NO NO NO - there is no superbrick My phone works, I can connect phonr to Odin, Mobile Obin, I can run in Recovery mode, but i can't for example do a nandroid backup or ful wipe under cwm recovery. I think, that there is some problem with permition to files on SD card, but I didn't meet with that problem on other rom (I used Paranoid Android (CM9 and CM10) and there was everything fine).
The reason I wrote is that I am worry if some parts of internal memory maybe corrupted, and flashing rom using Odin/Mobile Odin may caused superbrick.

Pre100n said:
NO NO NO - there is no superbrick My phone works, I can connect phonr to Odin, Mobile Obin, I can run in Recovery mode, but i can't for example do a nandroid backup or ful wipe under cwm recovery. I think, that there is some problem with permition to files on SD card, but I didn't meet with that problem on other rom (I used Paranoid Android (CM9 and CM10) and there was everything fine).
The reason I wrote is that I am worry if some parts of internal memory maybe corrupted, and flashing rom using Odin/Mobile Odin may caused superbrick.
Click to expand...
Click to collapse
Download EMMC CHECK from google play and after you run it check your heart also.

I used eMMC Brickbug Check. Result - Congratulation, test pass.
So I understand, that if there is some bug, there is caused by software, not hardware problem and I can reflash phone using Odin.
BTW - what means "Brick Bug ? - Yes. Insane chip." ?
I change kernel from stock to CF 5.3 before flashing to CleaNote. I found some info, that this kernel (cf 5.3) is not safe. Kernel after flashing ia NoteCore 12,3. Can it be the reason why i couldn't do a full wipe?
... I almost forgot - I used TriangleAway to remove flash counter. Maybe this is a problem?

[Q] Help Needed Phone stuck on N7000 screen

Phone won't boot past Galaxy Note Boot image
Phone will go in download mode by pressing Vol-Home Power buttons
Phone will go in recovery menu by pressing Vol+Home Power buttons but if i try to flash anything it shows verification error.
Anything flashed with Odin, goes successfully without any errors, but phone still won't boot past Galaxy Note boot image. When connected to PC in Odin mode USB recognised, when connected to PC with Galaxy Note boot image, USB not recognised (malfunctioning error appears)
I tried flashing ics/gb stock roms, kernels, pit files, and nothing helps
Please help
lastly
HAVE FLASHED N7000DDLC1_N7000ODDLC1_N7000DDLC1_HOME.tar.md5 using pc odin 3.04 and still stuck on gnote boot image
and lastly updated with :: N7000XXKL3_N7000ODDKL1_N7000DDKL1_HOME.tar.. but to no avail..
please help

do you have a custom kernal on such as hydroacore if you do or can try wiping cache and dalvic and factory reset then try reflashing if using pc maker sure kies is installed but dont use it use odin to flash a stock rom

anubis1126 said:
do you have a custom kernal on such as hydroacore if you do or can try wiping cache and dalvic and factory reset then try reflashing if using pc maker sure kies is installed but dont use it use odin to flash a stock rom
Click to expand...
Click to collapse
actually was on the stock ics and tried to install kingdroid by CWM.zip
and wiped data and cache from touch/temporary cwm..
then after install it got stuck on the first screen...
since then have tried to flash stock ics / gb firmwares but not getting past the first screen

first of all, make sure you don't make some foolish steps in wiping your phone., secondly, try to uninstall cmpletely PC kies and reinstall it again after. Once you've reinstalled that, don't open it, just open PC ODIN and try to boot back your phone in download mode. Make sure you have a yellow box on COM:1 in ODIN and use an extracted stock GB tar file and start flashing again.
EDIT: Since you've just mentioned you already wipe data in stock ICS.. are you using a safe kernel when you did the wiped?
if not, you may have toasted your Note.. imho...

it can take 5 to 10 mins after install to start however if it still goes no further and you can get into recovery can you flash any custom kernal,if you can do so then wipe and try to reflash if not i would ask dr ketan as he is awesome and may be able to help

^ No need to wait for that, as OP has already done a stupid thing of wiping on a touch CWM.. something that shouldn't be done at all....
only thing he can do is go to the section for the pit method partition to revive his phone... that's it!

letters_to_cleo said:
first of all, make sure you don't make some foolish steps in wiping your phone., secondly, try to uninstall cmpletely PC kies and reinstall it again after. Once you've reinstalled that, don't open it, just open PC ODIN and try to boot back your phone in download mode. Make sure you have a yellow box on COM:1 in ODIN and use an extracted stock GB tar file and start flashing again.
EDIT: Since you've just mentioned you already wipe data in stock ICS.. are you using a safe kernel when you did the wiped?
if not, you may have toasted your Note.. imho...
Click to expand...
Click to collapse
i was using the temp cwm used to gain root to flash .. very stupid i know..
my recovery and download modes are accessible so is my phone toast..
and if yes it is toast .. how to recover ??

letters_to_cleo said:
^ No need to wait for that, as OP has already done a stupid thing of wiping on a touch CWM.. something that shouldn't be done at all....
only thing he can do is go to the section for the pit method partition to revive his phone... that's it!
Click to expand...
Click to collapse
since i do have warranty on my phone left for another 2 months should i give it to the samsung repair center ?? what will they repair and how much time is expected it to repair ??

I suggest you ran first the partition scanner from here: http://forum.xda-developers.com/showthread.php?t=1823918, see if your partition don't have one of those bricked blocks....(courtesy of hg42)
Also consider this link - http://forum.xda-developers.com/showthread.php?t=1667886 for the pit file method

letters_to_cleo said:
I suggest you ran first the partition scanner from here: http://forum.xda-developers.com/showthread.php?t=1823918, see if your partition don't have one of those bricked blocks....(courtesy of hg42)
Also consider this link - http://forum.xda-developers.com/showthread.php?t=1667886 for the pit file method
Click to expand...
Click to collapse
but sadly the stock recovery is not accessing my memory card files and only internal sd and it has no option to mount storage ..
how to access the files i put in my memory card.. or should i flash some other ics stock rom as they have more options in stock recovery ??

no need to aggravate the problem by flashing another ICS... your Note's been bitten already.. don't let it bite twice...

Your last rom flashed is KL3 then have you wipe cache and data from recovery?
If not then do it, it should boot then.
Make sure last rom was flashed correctly and u are currently on KL3
If you have to press home button in recovery to enter your choice then it should be gb (kl3)rom (on ics you need to press power to select)
If wiping cache and data also not work, then flash wipe version of gb rom. If it stuck at data.img then yu have got damaged and should send to service Centre, without doing anything
Sent from my GT-N7000 using xda premium

i8190 got into bootloop, can't flash any ROM

Sorry for my bad English
I have a problem with my phone, I received it with stock Rom but it was very slow (abnormal slow even after factory reset) so I wanted to install Maclaw's ROM (I already succesfully installed it in two other phones I8190L and I8190N)
But I encountered several problems:
First I had problems with connecting into PC (drivers already installed) ODIN didn't recognized it, I had to try in another computer and ODIN detected it, but I tried several times to flash TWRP and CWM recovery and phone passed, ODIN was ok but still had stock recovery when it rebooted.
After several failed tries, I rooted the phone via PC with vRoot and installed TWRP, I succesfully flashed maclaw's ROM via TWRP and it was faster but phone had no signal, IMEI and Baseband were null
I tried to flash latest baseband via TWRP but then it got into bootloop
I tried flashing stock ROM via Odin (in another PC by the way, mine still doesn't recognize it) and it says it is installed but when phone reboots and its in about 25% of loading it stops and gets into bootloop again
Now I can't install ANY ROM, neither via Odin or TWRP, all folders are empty after installing and rebooting
Note: I did wipe dalvik/cache every time I installed new ROMs, factory reset, etc. I tried literally EVERYTHING, I can enter into recovery and download mode so I think it is not dead yet
Any solution?