[Q] Phone is not usable with random reboots - One (M7) Q&A, Help & Troubleshooting

I've been experiencing random reboots since I bought my Developer Edition but today I think it hit me real hard with the random reboots in short intervals.
this kind of reboots happened to me both on completely stock and custom rom but today heavy reboots occurred when I was on Insert Coin 2.0.3 (S-Off).
According to someone's advice, I installed catlog and try to record the events until the phone reboots. So I post my logs here and hope some one could save me from this misery.
the first file was recorded with "write to disk every 200 lines" so it may miss some very last event when phone rebooted. The next ones were recorded with "write to disk every 100, 20 and 10 lines". I hope some devs could have a clue on what is happening with my phone.
I also save the log file AFTER phone reboot but they were too big to attach. If you think those might helo, I'll post them somewhere else.

Might be something to do with Xposed

BenPope said:
Might be something to do with Xposed
Click to expand...
Click to collapse
Yeah, I've noticed that some custom ROMs got issues with Xposed on S-Off device. However, as I mentioned earlier, this happened to me while I was on completely stock rom, too.
I've made a few observations and found out that I haven't got a single reboot on AOSP for a whole day but AOKP still gave me random reboots (not as frequent as on InsertCoin but still).
Any help would be very appreciated

might be worth trying to install sense rom again stock or custom and do full wipe, cache and dalvik. strange that an aosp rom works fine. must be something caused by a sense rom, drivers or framework. was this problem introduced when you started using 4.2.2 roms? have you updated to the new firmware.zip?

well, my habit of installing new roms is always do a full wipe so I think the cause of reboot should not be related to that.
After getting no reboot on AOSP roms (carbon, cm 10.1), I decided to go back on custom sense roms but no luck. reboots just came back no matter what roms I was on (renovate rev 45, insertcoin rev36, rayglobe 4.3).
I went to stock again with RUU dev edition (.16 one). Phone gave me a reboot right after I finished setting up (as new phone). However, it has been running stable up to now (3 hours).
Should the reboot have any thing to do with Sense, i'm wondering. I would be very thankful if any devs can help me on this issue. I'm willing to make as many logs as required or install any custom, stock roms if neccessary.
Sincere

Related

[Q&A] [ROMS][SGH-T679]Mass CM Thread

Q&A for [ROMS][SGH-T679]Mass CM Thread
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
I noticed that the kernels are linked separately from the ROMs. Am I supposed to download and flash the kernels separately? I've flashed about half a dozen ROMs, but I've never flashed a kernel before. From what I've read, though, it sounds like following the same procedure. How about GApps? Do I need to download and flash those, too? And, if so, which pack should I use?
fajrero said:
I noticed that the kernels are linked separately from the ROMs. Am I supposed to download and flash the kernels separately? I've flashed about half a dozen ROMs, but I've never flashed a kernel before. From what I've read, though, it sounds like following the same procedure. How about GApps? Do I need to download and flash those, too? And, if so, which pack should I use?
Click to expand...
Click to collapse
Roms come with a kernel the kernel linked is just special some have overclock under volt etc etc.
Explains the kernel options.
If you do flash them do it after rom.
Gapps you dont technicly have to but yes. (for a standard setup flash gapps)And there should be a gapps linked at the start of rom. If not there will be soon.
Can't import contacts from SIM
Thanks! That clears up a lot.
I installed CM, and it looks very cool and smooth. But when I tried to import contacts from my SIM card, it said "No contacts". I thought maybe it was because I hadn't installed GApps, so I downloaded the "small" GApps package linked from the CM wiki and installed it from CWM. Still no contacts on the SIM card. Next, I thought that maybe my contacts actually weren't on my SIM for some reason. So, I booted back into CWM recovery and restored my previous system. Then, from the phone app, I went to Import/Export > Manage SIM card contacts. Sure enough, all of my contacts were there.
It seems like CM isn't reading my SIM. Any idea what's causing this?
Edit: Never mind. I found out that newer versions of Android don't allow you to store contacts locally. Somehow, the contacts got silently added without me having to import them, though. That's odd, because I don't remember allowing Google to store them in the cloud, and the SIM card appears blank... Oh, well, I installed MyLocalAccount, so I'll see if I can store the contacts locally that way.
@cars1189 running 10/18 build with 10/19(PAgapps micro) and 9/9k^k UV vhm kernel and have had no issues! Thanks for the great work, this runs solid and smooth!
I recently installed 10.2 and am loving it so far. One thing I ran into though was that the cLock widget was showing lots of wakelocks, so I disabled it and battery life has been great. Haven't run into any other issues (other than the screen staying on when off and charging), so this one is a keeper for me.
Didn't see this problem with 10.1, so curious if this is a known issue or not with the cLock widget? Also, are there any other planned updates coming for 10.2?
Thanks.
@RobbyG2112 I noticed it too when I was on 10.2 how ever I only ran it for a week maybe b4 going to cm11 I will say not sure if cars will update 10.2 but if you haven't tried cm11 its super stable and gets updated monthly!!
Thanks for confirming canodroid15, I wasn't sure what the lock screen would show when I disabled the widget but it put the default digital clock and date in it's place so it works out ok. I had disabled the weather and alarm widgets also so wasn't sure why having only the clock widget would cause wakelocks.
I'll probably get around to installing CM11 next, I'm a little slow on upgrading. I had been using CM10 for a long time and finally got tired of seeing the green preview pictures every time I used the camera so decided to go to CM10.1/10.2 recently.
Sure man, about the wakelocks you can try to catch it in a log. Enjoy 10.2 bro!!
kernel for cm11 (SGH-T679)
I recently installed @cars1189's CM11 10-4-14 build for the SGH-T679, with kernel 3.4.104-cyanogenmod-gda4bf58. It took a few tries, but it finally succeeded.
However, there's a slight issue in that I can't access my SIM card contacts. When I try to import from the dialer, it says "no contacts." I've searched around these threads and on the internet, and it seems that it is an issue with the kernel. Would it be possible for someone to recommend or point me to a compatible kernel that would fix that issue for me? Thank you so much for your help!
@valmeras I really don't think it has anything to do with the stock cm kernel but if your on 10/4/14 you can flash 9/9k^k kernels safely on that build about sim contacts idk I use my Google account to sync my contacts hope this helps good luck!
Edit: look for the rom & kernel dates/links in OP.
@canodroid15 - thanks for the response and suggestion. I'll give that kernel a try in the next few days. Not sure this is the solution, but hopefully that works. I've also seen some reference to SIM Tool Kit (STK), but I wasn't able to figure out if it that was the issue.
I would definitely use Google for syncing the contacts once I get this fixed, but for now, that's not possible because my phone is not able to read the SIM properly. I've tried saving a contact to the SIM, but I get an error like "unable to write, SIM is full" but I know for sure that's not the case. Alternatively, I might try to revive my old dumb phone and try to retrieve the contacts that way, then hopefully export that in some way.
@valmeras no prob man, if you have contacts on your sim and u put the sim in the dumb phone and export to storage u could then send a vcard via Bluetooth to the exhibit go into contacts and import from storage then Google sync good luck let me kno if u get it
So I flashed the kernel, but that didn't fix my issue. I do have some more free RAM now though
My old phone doesn't support exporting multiple contacts/vcards via bluetooth, but fortunately, Motorola has a contact exporter utility that exported everything into a CSV file to my laptop via USB. I had to install the drivers for the old phone to be recognised first. I was skeptical it would work given it was a new all-in-one driver thingie and my Motorola was quite old, but somehow it did! The whole process took several hours, but my contacts are now synced!
Sensors/rotation problem
Thanks for posting these ROMs! I just upgraded from Peach Sunrise and I'm really impressed with how well CM11 runs on this phone.
I want to report a problem I had and my solution for the next guy's benefit. With the latest 12-9-14 CM11 ROM, my sensors and compass didn't work correctly. The biggest symptom was auto-rotation did not work at all. Downgrading to the 9-9-14 ROM fixed everything. I didn't try any other ROMs, so they might work too.
Question about getting Google apps running on a SGH-T679
I installed CM 10.2 (cm-10.2-20140627-UNOFFICIAL-ancora_tmo) and it worked fine. I tried a couple different gapps downloads (doing a reinstall of CM10.2 between tries although I may have done that step incorrectly). But no matter what 4.3 gapps build I tried, Google Play Services would crash.
My main goal is to get to 4.3 or higher, so CM 10.2 or CM 11 would be great. (I'm open to other ROMs too. The only reason I'm choosing CM is because those are the only ROMs indicated as still maintained here: http://forum.xda-developers.com/wiki/Samsung_Galaxy_Exhibit_4G )
My question is whether anyone has either CM version running on a T679 and which gapps did you use? I nearly bricked my phone and would like to know that someone else has gapps running okay before I try again.
Thanks!
EDIT: I followed the 2 following threads to install CM 11 with the PA pico gapp package and added a few other Google apps manually from the Play store. I also made sure to reboot several times to make sure everything got fully initialized.
http://forum.xda-developers.com/showthread.php?t=2542793
http://forum.xda-developers.com/showthread.php?t=2397942
masteff said:
Question about getting Google apps running on a SGH-T679
I installed CM 10.2 (cm-10.2-20140627-UNOFFICIAL-ancora_tmo) and it worked fine. I tried a couple different gapps downloads (doing a reinstall of CM10.2 between tries although I may have done that step incorrectly). But no matter what 4.3 gapps build I tried, Google Play Services would crash.
My main goal is to get to 4.3 or higher, so CM 10.2 or CM 11 would be great. (I'm open to other ROMs too. The only reason I'm choosing CM is because those are the only ROMs indicated as still maintained here: http://forum.xda-developers.com/wiki/Samsung_Galaxy_Exhibit_4G )
My question is whether anyone has either CM version running on a T679 and which gapps did you use? I nearly bricked my phone and would like to know that someone else has gapps running okay before I try again.
Thanks!
EDIT: I followed the 2 following threads to install CM 11 with the PA pico gapp package and added a few other Google apps manually from the Play store. I also made sure to reboot several times to make sure everything got fully initialized.
http://forum.xda-developers.com/showthread.php?t=2542793
http://forum.xda-developers.com/showthread.php?t=2397942
Click to expand...
Click to collapse
Hey man! I hope you got it figured out! The only Gapps I use are PA Gapps! There are others but PA is the most complete package & has many options "IMO". You need to use a package that will fit your phone I use the micro package, or the nano. You need to use a package that matches your ROMs version, if your on 4.4.x then use 4.4.x Gapps. If on 4.3 use 4.3 Gapps. PA Gapps has a 4.3 package but its hard to find if you don't know where to look. 4.3 package can be found in the devs (Tkruzze) files on android file host, same place as the 4.4.x Gapps! Sorry if you didn't get answered b4 this I haven't been on this thread for weeks it seems! Hope this helps
So I've been trying out the CM11 OS2SD ROM (the last one in December), but I need to switch back as the bugs are just too much. I need my phone to work and stay charged, which is not happening on this ROM. And since it looks like CM12 is being worked on now that it's not likely the bugs in CM11 OS2SD will get fixed any time soon.
So first the problem. My USB socket on the phone is a little iffy, so I know that is where most of the problem is coming in. However, on the CM11 OS2SD ROM I'm using right now (the one dated 12/25) it frequently says it is plugged in, but is not charging. I've actually seen times where the battery monitor I'm using shows it has discharged the battery as much as 20% before I caught it, yet the status bar battery icon shows it as full and plugged in. On the older ROMs it didn't do this, so something isn't right with how the ROM handles the charging circuits in the phone. Plus, I've had frequent periods of "cpu hogging" (massive CPU load that doesn't seem to come from any one source and that doesn't seem to show up in OS Monitor) that can end up in a crash-reboot of the phone.
So as a result, I want to switch back to an older version of the CM11 ROM. I was using one of the November builds for quite a while, only having to put up with an occasional crash-reboot (the current ROM seems to do this at least every other day, the older one could go a whole week and maybe have it happen only once). What is the process to undo what was done to the phone for the OS2SD build to be loaded?
can't install
I have a problem after installing it via cwm and rebooting, the ensender shows me a screen where I order a factory reset but when I was I do not ensiende the phone
CM 12 Android is upgrading every boot
Ever since I flashed Cyanogenmod 12 every time I reboot it says "android is upgrading optimizing app 1 of 1" and it takes about 8 minutes. There are no odex files in data/app so that cant be the problem. Someone please help. The first time I flashed CM 12 I wiped data and factory reseted but since i seen this happen I flashed Cm 12 again but this time I formatted System, Data, Boot, and SDcard 0 but it still seems to happen. Also, recently my phone has been shutting off by itself every time I turn off the screen. And I know this isn't a hardware problem because the phone never turns off while music is playing with the screen off. It didn't start happening with CM 12. It was already happening with CM11 but it only started happening about a week ago. Im really thankful for cars1189 working on the rom and anyone else who worked on it. You guys are great. Hopefully you can help me out.

Help with Pure Nexus Project would be greatly appreciated

I am new to my Nexus 6 and new to flashing custom roms. I have read the thread all morning long and still don't feel comfortable with what information I have obtained. I'm currently running marshmallow 6.0 rooted with supersu 2.52. How can I flash the latest pure Nexus project 6.0.1 correctly? I do have TWRP recovery installed and I'm running on build number MRA58R
Make a backup in TWRP, wipe your system partition, Flash the ROM zip and the GAPPS zip, reboot, profit. If anything fails you can roll back to your backup and try again.
Real simple. Download the latest built as well as the latest google apps (gapps)
Reboot to TWRP
Do a backup, so you have a restore point if something happens
Go to wipe->advanced wipe and choose both caches, system and data. DO NOT wipe internal storage
Go to install, choose the ROM and gapps and install them
Reboot
You will now be on the latest. You will have to set your phone up again, and all your text messages, home screen, act will be gone but all your stuff on your sdcard (internal storage) will be untouched.
You can also get real ambitious and make backups with something like titanium backup of all your apps and data and restore it after booting PN, but try to not back up system apps or system data (it should be an option... I dont know, I never use tibu). The main thing you lose without backing up is texts, I usually just deal with it/redownload apps/set up home screen again.
On future updates, unless there are major changes and its indicated by a majority of people in the PN thread, just dirty flash.
That is, backup, wipe caches, install new ROM version( I wouldn't reflash gapps ) this will leave all your apps, settings, ect... But should only be done when flashing the same or a very similar ROM. If you dirty flash and experience problems, go back and clean flash as I first instructed.
So I should not worry about flashing the new 32r radio?
shouldnt this have been one of the first things to learn BEFORE you ever rooted your phone? yea, nice job jumping in before learning your way around. i bet you even used a toolkit to root your device..
Everyone's got to start somewhere. And no toolkit here but thanks for your input! And thank you for the helpful responses.
roy.garlington said:
Everyone's got to start somewhere. And no toolkit here but thanks for your input! And thank you for the helpful responses.
Click to expand...
Click to collapse
no tool kit? ok, your -1 on not learning before rooting has a +1 right by it, for rooting the proper way. you just might earn some respect
Hey there simbo, what do you say about flashing the radio?
Sure. Or don't.
Whatever.
The radio is pretty separate from android. Its basically drivers to tell you phone how to use hardware.
FI has certain requirements for activation that may check what radio you have, but outside of that run what ever works good for you., its not going to for sure be any specific one. Newer may often be better but its not uncommon that an older one may work a little better.
Different apps can help you monitor (I dunno which ones... But I know its a thing ), you can also go into about phone -> status -> sim status and check signal strength where lower dBm is better(well a lower numeric value... Its technically a negative number, so higher is better i.e. -113 is worse then -104). This will vary slightly minute to minute and place to place so just taking a glance once won't really settle it for you
I just use it for a day or two, pay attention to how my signal is (just kinda how often did I have decent # of bars, nothing scientific), and check battery stats clicking on cell standby and looking at % of time with out signal.
roy.garlington said:
Hey there simbo, what do you say about flashing the radio?
Click to expand...
Click to collapse
youre choice. you can try any of the radios, from previous android versions, on any android version. they arent specific. im using the 27R radio. whichever one works best for you, thats whats important
roy.garlington said:
I am new to my Nexus 6 and new to flashing custom roms. I have read the thread all morning long and still don't feel comfortable with what information I have obtained. I'm currently running marshmallow 6.0 rooted with supersu 2.52. How can I flash the latest pure Nexus project 6.0.1 correctly? I do have TWRP recovery installed and I'm running on build number MRA58R
Click to expand...
Click to collapse
Well, it's all very easy if you read a little. Still i will give you one extra tip in case you start flashing all kinds of roms: You unlocked your bootloader. Before doing that you enabled "OEM unlocking" in 'Developer options'. Leave that enabled (this setting is 'sticky'. even when you wipe the device)!!!!. Leaving OEM unlocking enabled will disable "Device Protection" that causes sometimes a 72 hours lock-out from your Google account.

Problem with lockup / display not turning on across various roms, rooted droid

I successfully rooted my droid (that came with lollipop), using this guide
https://forum.xda-developers.com/droid-turbo/general/guide-how-to-unlock-bootloader-install-t3292684
installed twrp backed up the stock OS and installed resurrection remix lollipop rom. I did not install any different modems or radios as I planned to stay on lollipop.
Everything worked great yet after a day or two the display/phone would appear to lock up. I can press power, the display doesn't come on and when (usually) moving the the volume up/down I do hear sounds. Sometimes at this point it will reboot by itself, other times I have to reboot it.
When it comes up it goes through the android is upgrading thing, and sometimes works fine after, sometimes not, regardless eventually this problem repeats.
Thinking it was perhaps RR I tried straight Cyanogenmod, and eventually the rooted stock OS, both have this same problem.
I've tried using it with very minimal installed in the way of apps, same issue.
I've tried saving the log to SD to peer at later, but going through it I don't really see anything obvious to show what the problem is.
I"m wondering if there's a problem with the phone itself (it's a refurb) and am considering unrooting it and returning it.
Anyone seen this or thoughts on what might be the issue?
p.s.
if you happen to have a good link handy to an unrooting guide you might shoot it my way thanks.
thanks in advance!
What versions of the other ROMs did you use? Lollipop also, or Marshmallow? Nougat? For rooted stock ROM did you upgrade to Marshmallow? None of the Lollipop ROMs are supported anymore, so hard to answer for those.
There are ways to grab logs after a reboot, but here's another suggestion...
I use Auto Reboot app (needs root) to schedule a reboot my phone every day while I'm asleep.
This seems to keep the cobwebs cleared out, so the phone runs better. I know you want to find the issue, but maybe it's an accumulation of apps not releasing RAM orb something. This might help prevent that.
thanks for the reply
ChazzMatt said:
What versions of the other ROMs did you use? Lollipop also, or Marshmallow? Nougat? For rooted stock ROM did you upgrade to Marshmallow? None of the Lollipop ROMs are supported anymore, so hard to answer for those.
Click to expand...
Click to collapse
I tried the last released CM lollipop snapshot, as well as the last nightly.
For RR it was last released, "ROM OS Version: 5.1.x Lollipop"
ChazzMatt said:
There are ways to grab logs after a reboot,
Click to expand...
Click to collapse
Yeh I've been saving it to the SD so I can view it after a reboot, I've looked at 4 or 5 of them after the problem occurred and at least to me nothing really stood out
ChazzMatt said:
but here's another suggestion...
I use Auto Reboot app (needs root) to schedule a reboot my phone every day while I'm asleep.
This seems to keep the cobwebs cleared out, so the phone runs better. I know you want to find the issue, but maybe it's an accumulation of apps not releasing RAM orb something. This might help prevent that.
Click to expand...
Click to collapse
Yeh I expect it might periodically need a reboot but if it's just unpredictiably locking up or rebooting on its own it's not very usable.
I think I'm just going to have to try to unroot and return, maybe I'll go with a LG V20 as I don't want to have pay to re-root another one of these and possibly have same issue. Also the whole pay to have some app do something secret to my phone does leave me a bit uneasy.
Kind of a bummer as I'm actually pretty impressed with this device, fast, good battery, takes nice photos, only drawbacks for me are no removable SD and lack of LED notification, but I was willing to live without those given how good everything else was.
thanks
Same here,
I tried with different Roms 7.X, still blocking and display not turning on.
I'd appreciate some help.
Thanks!
Android Version: 7.1.2
Current Rom: AOKP
Kernel: 3.10.107-Stock-bhb27-nougat-kerneL
MrN00b said:
Same here,
I tried with different Roms 7.X, still blocking and display not turning on.
I'd appreciate some help.
Thanks!
Click to expand...
Click to collapse
FWIW and in case it helps you or someone else, I seem to have fixed mine finally, here's what I did.
First I installed latest twrp (mod 4) https://androidfilehost.com/?w=files&flid=39562 (there's a thread on this twrp if you want tor read on it). That in itself didn't fix the issue but did finally let me format and got rid of an 'mkfs.f2fs: invalid option -- r, ERROR=1' type error I used to get.
I installed this stock zip from twrp as described in thread:
https://forum.xda-developers.com/droid-turbo/development/rom-su4tl-49-100-stock-t3390041
It would never actually boot it would shut my phone off not long after showing the boot screen, and I'm not sure if doing that was necessary or not.
Taking some suggestions from here:
https://forum.xda-developers.com/droid-turbo/help/help-request-custom-rom-phone-unlocked-t3767070
I dug up the last official CM 13 snapshot:
https://www.google.com/search?q=cm-13.0-20161221-SNAPSHOT-ZNH5YAO3Y5-quark.zip
sha1: 9a219dd487c27e51b0c5c4922812838f394099c5
Wipe and installed with no gapps and voilĂ  it would boot consistently. Without reinstalling I tried installing pico gapps and it would still boot though it took maybe 15 mins initially.
I want Nougat so I wiped and installed lineage-14.1-20180612-UNOFFICIAL-quark.zip from https://forum.xda-developers.com/moto-maxx/development/rom-t3494646 again no gapps and it also booted fine, whereas previously it would hang on booting. Without reinstalling ROM I tried installing opengapps nano and it would just hang.
I could then no longer get it to boot again, so I reinstalled CM13 no gapps, which booted fine, wipe and install lineage-14.1-20180612-UNOFFICIAL-quark.zip no gapps, and now it boots fine though currently it's taking a while.
I should perhaps note I took twrp backups inbetween steps whenever I had a working boot, (ex before installing gapps), but once the phone went back to hanging on boot, those restores didn't help. Only reflashing CM13 seemed to clear things up.
My ultimate goal is a LOS ish Nougat/Oreo ROM with no gapps using microg, and running tmobile, I'll see what I end up with.

Just ordered razer phone 2 looking for custom os instructions.

So from what i gathered TWRP doesnt work yet on the razer phone 2 and lineage os doesnt have a build for this phone yet i gotta ask what is available for modding razer and what is the step by step to make that happen. i seen some instructions but other than root there isnt much to do.
SynGreis said:
So from what i gathered TWRP doesnt work yet on the razer phone 2 and lineage os doesnt have a build for this phone yet i gotta ask what is available for modding razer and what is the step by step to make that happen. i seen some instructions but other than root there isnt much to do.
Click to expand...
Click to collapse
TWRP works just fine on this device. It's installed when you fastboot flash arter97 kernel and it works perfect. He just updated it to r10. Good luck!!
Edit: as far as ROMs look around in this forum you'll find a couple of different ones in the same section as arter97 :good:
which one do you suggest? i dont see much of a selection.
SynGreis said:
which one do you suggest? i dont see much of a selection.
Click to expand...
Click to collapse
Right now there really aren't any, although there are a few in development, such as AOSP. I think the initial high price, specialized hardware & relative unpopularity has not helped attract any serious development.
I've noticed that ROM development has decreased significantly in the last few years. I remember the days of the Samsung Galaxy Nexus & the HTC Evo 4G where it seemed as if there was a new ROM released every week. I think its because (a) recent Android operating systems are offering greater customization out of the box, & (b) with the new A/B partitioning scheme, it makes ROM development more difficult.
Cancel your order. Get your money back. This phone while it is awesome at gaming and has a great screen. The OS is ****ty to say the least. I have had more issues with it freezing up. Not wanting to download apps from the play store. Not allowing me to install apps that I have already downloaded on my device. Now it's showing up as the Asus Rog II. This phone is the biggest heaviest piece of **** I've ever had. I promise you if everyone knew the issues this phone has you couldn't give it away free.
mattwheat said:
Cancel your order. Get your money back. This phone while it is awesome at gaming and has a great screen. The OS is ****ty to say the least. I have had more issues with it freezing up. Not wanting to download apps from the play store. Not allowing me to install apps that I have already downloaded on my device. Now it's showing up as the Asus Rog II. This phone is the biggest heaviest piece of **** I've ever had. I promise you if everyone knew the issues this phone has you couldn't give it away free.
Click to expand...
Click to collapse
Mine showed as in rog 2 the last time I reloaded the OS. It's because it searches for "phone 2" and randomly guesses. No biggie, just fix it in the settings. No issues here from playstore, if you do it's common on every Android phone and fixable by clearing the data from the app. Maybe you should reflash the stock firmware? I don't see why you would call this phone ****ty. It's basically running AOSP stock except some theming from Razer. I fixed some freezing issues by reseating the Sim and SD card that I have. This thing rocks, just saying.
I've cleared the play stores cache, data, and dalvic in every method imaginable. Even google play services. I've restored backups, flashed stock .imgs, and flashed the stock odex Ron and the deodexed rom. It doesn't start failing to install play store apps till after I initially install most the apps I normally use then a while later when I think of one I forgot I'll go and try to install. That's when it starts messing up. If I watch a video threw some websites built in player on the webpage I'm viewing... about 15 to 20 seconds into the video everything but sound freezes. And will not correct itself. I have to hold the power button till it reboots. Only videos I can watch without issue is from the YouTube app. It's ridiculous. I've unlocked, rooted, and crack flashed tons of roms on all of my pixel and Nexus devices without any issue besides the random freeze. Which can be quickly fixed by toggling the screen on and off. This **** is ridiculous. So over this phone.
matt that might be just you i havent experienced any issues with this phone whatsoever.
"I think its because (a) recent Android operating systems are offering greater customization out of the box, & (b) with the new A/B partitioning scheme, it makes ROM development more difficult."
can you provide more info on this A/B partition? id love to see what customizable stuff i can do with this.
mattwheat said:
I've cleared the play stores cache, data, and dalvic in every method imaginable. Even google play services. I've restored backups, flashed stock .imgs, and flashed the stock odex Ron and the deodexed rom. It doesn't start failing to install play store apps till after I initially install most the apps I normally use then a while later when I think of one I forgot I'll go and try to install. That's when it starts messing up. If I watch a video threw some websites built in player on the webpage I'm viewing... about 15 to 20 seconds into the video everything but sound freezes. And will not correct itself. I have to hold the power button till it reboots. Only videos I can watch without issue is from the YouTube app. It's ridiculous. I've unlocked, rooted, and crack flashed tons of roms on all of my pixel and Nexus devices without any issue besides the random freeze. Which can be quickly fixed by toggling the screen on and off. This **** is ridiculous. So over this phone.
Click to expand...
Click to collapse
The freezing is due to a bug in Google Chrome. All you have to do to fix this issue is roll back the app version to 72 because version 76 doesn't work on our RP2.
Edit: uncheck auto update
Only freeze I had so far was with the infamous switch switch to the tele lens. Not a single other issue with software.
Other question, if you put the display at 120hz, and you scroll something, does it 'feel' like your finger sticks to text/icons?
I mean, is there no delay like you normally would have at 60hz?
On the Oneplus 7 Pro the 90hz is already a big improvement (less delay) but 120 should really be kickass... anyone?
MasterThiefGarrett said:
Other question, if you put the display at 120hz, and you scroll something, does it 'feel' like your finger sticks to text/icons?
I mean, is there no delay like you normally would have at 60hz?
On the Oneplus 7 Pro the 90hz is already a big improvement (less delay) but 120 should really be kickass... anyone?
Click to expand...
Click to collapse
Take this with a grain of salt, as I just got the RP2, but its the most responsive, "sticky" feeling Android phone I've used. 120hz is like night and day to me.
On a related note, Firefox Fenix with webrender enabled feels significantly more responsive than Chromium atm, as it seemingly renders the whole page instead of stuttering as you scroll like Chrome.
JDBarlow said:
TWRP works just fine on this device. It's installed when you fastboot flash arter97 kernel and it works perfect. He just updated it to r10. Good luck!!
Edit: as far as ROMs look around in this forum you'll find a couple of different ones in the same section as arter97 :good:
Click to expand...
Click to collapse
how can you get twrp in? Everytime i try to flash twrp in i get stuck at powered by android logo.
SynGreis said:
how can you get twrp in? Everytime i try to flash twrp in i get stuck at powered by android logo.
Click to expand...
Click to collapse
Which version of Android are you running currently?
MR1 will be arter97 r11
MR2 will be arter97 r12
http://arter97.com/browse/aura/kernel/
duplicate post
JDBarlow said:
Which version of Android are you running currently?
MR1 will be arter97 r11
MR2 will be arter97 r12
http://arter97.com/browse/aura/kernel/
Click to expand...
Click to collapse
i havent flashed either of those arter because im worried that its gonna screw things up again.
Im sitting on the 9.0 MR1 stock image from razer.
https://developer.razer.com/razer-ph...actory-images/
SynGreis said:
i havent flashed either of those arter because im worried that its gonna screw things up again.
Im sitting on the 9.0 MR1 stock image from razer.
https://developer.razer.com/razer-ph...actory-images/
Click to expand...
Click to collapse
So are you on the global version? If so let it update to MR2 and fastboot flash boot arter97 r12 and you'll be just fine.
Which version are you running then to get stuck on boot logo?
Edit: if you want to stay on MR1 then flash arter97 r11
i tried updating to mr2 but says installation failed.
all i do is
faatboot flash boot kernal.img?
I just rooted MR2 to show you. It took me less than 5 minutes to do the whole process of fastboot flashing kernel booting straight into TWRP recovery which is included then installing magisk immediately rebooting into system and updated magisk. Done
JDBarlow said:
I just rooted MR2 to show you. It took me less than 5 minutes to do the whole process of fastboot flashing kernel booting straight into TWRP recovery which is included then installing magisk immediately rebooting into system and updated magisk. Done
Click to expand...
Click to collapse
My only question is, which version zip of magisk did you use in TWRP to flash? 20 or the latest beta? I'm rooted now with a modded boot.img that someone else used the canary/latest beta. Just don't want to screw myself and end up having to flash mr1 again then taking the update.

It is slow, slow, slow...

Hi guys,
I'm a bit concerned about my mi8. Since several weeks now the phone is getting so slow to boot, even into recovery mode !
For exemple, today before starting to see the havoc logo spinning I count more than 20 spins. Months ago it took only 5 or 6, 2 weeks ago : more than 8... Etc.
When phone is started first apps tha usualy open really fast (Viper4fx, gsam battery monitor, magisk notifications) are so slow to open. Some other apps same thing the moment I open them.
What do you think about that ? At first I thought my battery is dead. It charges as fast as usual. Discharging is like before I'd way. Not worst for sure So I hope Its nor that.
I'm using battery charge limit (the app, nor from havoc sertings) to stop at 81% and charge it always when the minimum reaches 40%. So for battery life I think I'm doing things well.
I'm still on pie. Please, see the attached picture to look at my version.
I'm wondering what could cause this big issue.
I'm used my make lot of backups with twrp 3.3.1-1. Sometimes 2 per days, sometimes none in 2 or 3 days and so from the day I unlocked the phone and installed my first and only rom : havoc. Sure I installed several updates but no other ROM and I stopped updating it cause it worked really as I expect it should. So...
Also, making twrp backups are Soooo slow. Generaly it tooks depending of the size, between 90 sec and 140. Now it takes more than 6 min !!
So before doing a last backup and do anything I wanted to ask what you all think about that before doing a clean install update/upgrade.
Do you think it worth the try ?
I tried to clear caches (both) in twrp. Nothing :/
I'm afraid I killed my phone memory or battery. Don't really know.
Last thing, maybe an important one but don't know why it would... I installed notify & fitness and sleep as Android for my mi band 4 and I noticed my phone getting slow during this period. About N&F it was on 12.27.2019.
The firmware was updated way after that issue... And of course I cleaned all app caches manualy, not using some weird app to do the job.
Sorry me for this long SOS, and please forgive my bad english. I'm starting to being crazy. OK, the phone works but oooh boy, Its slow.
Cheers
Your rom software is out of date. if you truly want the best experience on a daily basis. There is no doubt in my mind that Xiaomi.EU is still the absolute best experience overall.
It is light years better than the Global stock Rom, all of the bloat has been removed and it has some of the Pixel AOSP features integrated into the Rom. but yes it's still miui. For me that is a good thing because I am a fan. It sounds like you have never tried Xiaomi.EU so give it a shot. I guarantee, that if you keep it installed for a few days, you will not want anything else unless you are just bored. Wait until the new update comes out, it should be late today or tomorrow. by the way, you will average about 7.5 -8.5 hours SOT.
On the other hand, if you are content with Havoc, then migrate to the latest, Its pretty great but the battery SOT time is bad right at 4 hours. This can be improved by changing the kernel. I tested the LawRun_x5.0-60hz kernel and it improves SOT to 5.5 hours, and the OS gennnerally runs better. Other Roms are also good, but lack the abundance of features that Havoc has. A comparable heavily feature rich rom is CRDroid.
If you want to stay on your current rom, then clean your caches, and at least upgrade the kernel. That alone may be enough to improve your recent performance. i dont think you phone is going bad. You likely just have some corruption, or too many processes running in the background.
@tsongming Hi and cheers for replying.
To start, I forget to mention that I'm using a global version.
That being said, I did clean all caches including from all my apps. Manualy of course.
I did use Xiaomi MIUI for very long time. Since I got my first Redmi Note 4. As you well said, I did switch to custom ROMs for what you said.
Regarding SOT... And the reason why I didn't update anything on my Mi8 its because with this version of havoc and this kernel. Gsam bat monitor tells me now : 9h41 (5h58 Max) and before my issue it was 11h !
So, to answer you : before asking here I also trying to update the Rev kernel but lot of things didn't work anymore. Like unlock the phone with my fingers and I think its pretty much normal as Havoc as evolved so kernel did the same and is not compatible with older version I think. At least, mine...
Honestly I tried lot of things to make my havoc super speed, smooth with a great battery and I was happy with that
I do hope I answered to all your questions.
I don't know what to do cause I'm not 100% sure that starting from clean MIUI or custom rom will fix it. What if not ? I'll "forced" to reinstall "everything" (I'm aware of backup apps but dont wanna use them) even if I saved all important stuffs
And if I badly revert to the last MIUI (I never reinstalled MIUI after a custom ROM. I know there is good tuto, but...) I could break it and I'll loose everything. For now it works, slowly OK ^^' but I rather that than taking a risk and found what is the cause of my problem.
Erpe7 said:
@tsongming Hi and cheers for replying.
To start, I forget to mention that I'm using a global version.
That being said, I did clean all caches including from all my apps. Manualy of course.
I did use Xiaomi MIUI for very long time. Since I got my first Redmi Note 4. As you well said, I did switch to custom ROMs for what you said.
Regarding SOT... And the reason why I didn't update anything on my Mi8 its because with this version of havoc and this kernel. Gsam bat monitor tells me now : 9h41 (5h58 Max) and before my issue it was 11h !
So, to answer you : before asking here I also trying to update the Rev kernel but lot of things didn't work anymore. Like unlock the phone with my fingers and I think its pretty much normal as Havoc as evolved so kernel did the same and is not compatible with older version I think. At least, mine...
Honestly I tried lot of things to make my havoc super speed, smooth with a great battery and I was happy with that
I do hope I answered to all your questions.
I don't know what to do cause I'm not 100% sure that starting from clean MIUI or custom rom will fix it. What if not ? I'll "forced" to reinstall "everything" (I'm aware of backup apps but dont wanna use them) even if I saved all important stuffs
And if I badly revert to the last MIUI (I never reinstalled MIUI after a custom ROM. I know there is good tuto, but...) I could break it and I'll loose everything. For now it works, slowly OK ^^' but I rather that than taking a risk and found what is the cause of my problem.
Click to expand...
Click to collapse
The current version of Havoc already uses the Revolution kernel, and its part of the current problem so use something else. The Law kernel that I mentioned is extremely good. but so are the others latest release such as Mipa and Twisted. and no fingerprint issues with these kernels.
As a longtime user you do know that anytime you switch the kernel that you should remove all passkeys, screenlocks, face unlock etc.? This could explain the slowness, you have encryption issues.
Android 10 is much improved over pie, except for the battery 11 hours SOT is unheard of on Android 10. Except for 1 guy claiming 11 hours on the ION rom. I tried the rom and it is good. but I am only getting 7 hours Sot, and the Rom is like Lineage, just the basics. No fingerprint issues.
You truly need a full clean install, including formatting storage. just backup your files first.
Xiaomi Miui? Did you mean Xiaomi.EU? if not Xiaomi.EU , then you really should try it, you wouldn't know from a past experience. This is Miui 11 on Android 10 and its flawless.
thx again @tsongming
Yep, I note all what you said to me. But to be honest last year anytime I switched from kernels to kernels I never had to reset screenlock etc. Last year cause as I said once I found the kernel which suits me I stuck with it.
So I can state its note related to that cause I didn't change it since month trust me, just tried the last kernel one or week ago to be sure if it was the cause or not. Just installed and uninstalled apps since.
look at this screenshot you'll see what I meant about SOT which was better month ago. :/ Maybe I didn't explain well...
I'm not against trying any roms including xiaomi.eu perhaps (I do have links for this I think but any link is appreciated just in case. I just download the lastest stable 11 from xiaomi.eu if its what you have in mind) but I want to be sure if it'll fix what I'm facing. You know ?
I'm afraid that doing a clean install with any rom won't fix my beautiful Mi8 ^^
Erpe7 said:
thx again @tsongming
Yep, I note all what you said to me. But to be honest last year anytime I switched from kernels to kernels I never had to reset screenlock etc. Last year cause as I said once I found the kernel which suits me I stuck with it.
So I can state its note related to that cause I didn't change it since month trust me, just tried the last kernel one or week ago to be sure if it was the cause or not. Just installed and uninstalled apps since.
look at this screenshot you'll see what I meant about SOT which was better month ago. :/ Maybe I didn't explain well...
I'm not against trying any roms including xiaomi.eu perhaps (I do have links for this I think but any link is appreciated just in case. I just download the latest stable 11 from xiaomi.eu if its what you have in mind) but I want to be sure if it'll fix what I'm facing. You know ?
I'm afraid that doing a clean install with any rom won't fix my beautiful Mi8 ^^
Click to expand...
Click to collapse
You posted a question asking for help, but then you dont want to try anything because you tried things before. Yes, its true that Magisk is sometimes persistent, but it depends on the release. it is safer to remove the passkeys.
But if you really think about it, what would cause the phone to cool down, ignore the battery stats especially from Gsam it's often very wrong, I use it too, for years and in your case you are getting good SOT because you have a zero % for the phone. It's almost like a Sim card isn't installed? Every rom will provide extremely fantastic SOT when a sim card isn't being used. If you have an active sim card then something is wrong with the monitoring because Gsam is showing 0%, it should show something even if you havent made a phone call for days.
Do whatever you want it's your phone:
I still think that you have encryption or corruption issues and its bad enough for your to make a post about it. FYI : The battery dying doesnt slow down the phone. Yes, some stock roms, notably Apple intentionally by choice changed the kernel core settings automatically on aging batteries. Hence the huge controversy a couple of years ago, that isn't happening to you.
A dying battery doesn't slow down the phone, evn cold solder joints do not slow down the phone, they keep a phone from booting to system and to recovery. The only thing left is corruption or thermals, which on this phone good luck editing thermals because they are mostly encrypted. The remaining possibility is corruption, post your log files and lets see what's actually going on.
Again, what would slow down your phone even in recovery?
It's always thermals, or corruption. Slow to start up, even in recovery.: We can rule out thermals unless your battery temp or cores temps are extremely high. This leaves corruption. if its slow while booted into the system, then you may have apps or processes crashing and you are not aware of it. If that is true, then eventually the phone may stop booting up altogether. If its thermals causing overheating you should truly resolve this issue immediately before actual heat damage occurs. Did you ever flash display refresh rate mods? If so your DTBO partition could be the issue....corruption.
Use this program to provide an app list : https://play.google.com/store/apps/details?id=de.onyxbits.listmyapps ( Weed out any unknown programs that you may not realise are installed. Post the list along with complete logs. Once you see these crashes, that I am sure the logs will show: Do as I suggested earlier: wipe and "format" your phone. Then later use best practices and remove passwords before changing kernels
Cheers. I'll try what you suggest.
I might have some questions in the future regarding format and some other things.
Never flashes display refresh rate and never noticed any overheat issue on my phone.
Sure, I'll do something like you said as soon as possible.
PS : you said "before remove passwords". You mean in the parameters of the phone like schema/diagram, pin, etc ?
Cheers
Erpe7 said:
Cheers. I'll try what you suggest.
I might have some questions in the future regarding format and some other things.
Never flashes display refresh rate and never noticed any overheat issue on my phone.
Sure, I'll do something like you said as soon as possible.
PS : you said "before remove passwords". You mean in the parameters of the phone like schema/diagram, pin, etc ?
Cheers
Click to expand...
Click to collapse
You could remove password under data/system/locksettings.bin But it's better to just go the settings//security/ *.* < remove whatever you have setup : prints and face unlock first before, pattern or pin.
Another good practice for Android 10, should you go there is :
Extract the boot image from the rom
Place it inside the downloads folder.
When ready to flash root, patch to the boot image first, ( this links the existing system binary credentials into the boot image)
Boot to recovery flash boot to boot
Then flash magisk > then boot to system and you will have no issues whatsoever with root.
Afterwards, if you decide to flash different kernel, Magisk is more likely to stay stay persistent.
I hope everything is good from this point forward take care.
@tsongming Thanks for reminding me the locksettings.bin thing because I used it once on my old phone and I forgot that.
Never installed 10 yet. But I take carefuly your advice.
Hello!
Did you fix it? Because it's happening to my Mi 8 too. It's exactly the same issue, the phone takes a long time to boot up, to open apps and even to boot into TWRP
I have that issues on my mi8
I had this problem with me before and I solved it by flashing the last official ROM, Now the problem happened to me again and I do not know what is the reason behind it @tsongming
Sent from my MI 8 using Tapatalk
ahmadbasher011 said:
I have that issues on my mi8
I had this problem with me before and I solved it by flashing the last official ROM, Now the problem happened to me again and I do not know what is the reason behind it @tsongming
Sent from my MI 8 using Tapatalk
Click to expand...
Click to collapse
I recently had some issues with my phone as well. I was able to get my phone back to normal functioning by flashing the latest stable fastboot rom using the flashall.bat method. (dipper_global_images_V11.0.3.0.QEAMIXM_20200118.0000.00_10.0_global)
I kept everything stock for a few days even recovery, to ensure once that everything was back to normal.
Next I flashed the latest OrangeFox beta recovery, and I highly recommend the latest beta build over any other version of Recovery, it will decrypt when official Twrp will not. It is now more up to date than the LR Team version, and all of the bugs have been solved by DarthJabba. In fact, he even added a script to work around poorly designed startup scripts, which are suprisening not consistent between the wide range of custom roms for the Mi8.
Today, I am still using Orange Fox, ( OrangeFox-R10.1_002-Beta-dipper) and the latest stable Magisk. I no longer have freezing, unexpected shutdowns, slow starts, or poor battery life. My issue was without a doubt corruption, and bugs with the mid february version of Xiaomi.EU. The last 2 releases have been solid.
Since this weekend I face the same problem. Every action seems to bit slower than before. And I don't know what I did that resulted in this problem. The last thing I remember I installed was the new Miui12 live backgrounds. But I deleted them again.
I'm on stock since some weeks.
But I don't want to install everything from the beginning again.
Do you know how to solve the problem without wiping everything?
Edit: As I think about it, it seems as if the caching of the apps doesn't work as good as before and the killing of apps is too aggressiv.
But what did affect it?
Edit: I found the solution for my problem.
With Android Battery Historian was able to find the process that made the trouble.
It was the Miui wallpaper carousel app. After deleting it the problems were gone.
Erpe7 said:
Hi guys,
I'm a bit concerned about my mi8. Since several weeks now the phone is getting so slow to boot, even into recovery mode !
For exemple, today before starting to see the havoc logo spinning I count more than 20 spins. Months ago it took only 5 or 6, 2 weeks ago : more than 8... Etc.
When phone is started first apps tha usualy open really fast (Viper4fx, gsam battery monitor, magisk notifications) are so slow to open. Some other apps same thing the moment I open them.
Click to expand...
Click to collapse
it's a hardware issue and it's going to keep coming back, i spent the last two months trying to resolve it but i gave up.
it seems that UFS chip malfunctions on a lot of F1 and mi8 phones.
danielnavarrowo said:
Hello!
Did you fix it? Because it's happening to my Mi 8 too. It's exactly the same issue, the phone takes a long time to boot up, to open apps and even to boot into TWRP
Click to expand...
Click to collapse
Sorry for repling only now guys...
Thx to all who proposed to solve my issue, I will tell you what I did to fix my mi 8.
I did a crystal clean flash :
- downloaded & installed last miui image using miflash
- used "clean all" at the bottom right (be careful to not choose something else like "lock boot loader ")
- then you'll need to flash recovery (twrp), then format data by typing yes. Then copy from where you want your custom rom, flash it flash magisk and boot.
I did this several months from now and my phone is like just new!
No issue at all since.
I guess installing lot of different kernels like I did before must have broken something and hopefully this could help if you dont have more serious issues.
Ps: battery is more than ok and there is no hardware problem.
Thx again to Dexer125 for his help!
Sent from my dipper using XDA Labs
Erpe7 said:
Sorry for repling only now guys...
Thx to all who proposed to solve my issue, I will tell you what I did to fix my mi 8.
I did a crystal clean flash :
- downloaded & installed last miui image using miflash
- used "clean all" at the bottom right (be careful to not choose something else like "lock boot loader ")
- then you'll need to flash recovery (twrp), then format data by typing yes. Then copy from where you want your custom rom, flash it flash magisk and boot.
I did this several months from now and my phone is like just new!
No issue at all since.
I guess installing lot of different kernels like I did before must have broken something and hopefully this could help if you dont have more serious issues.
Ps: battery is more than ok and there is no hardware problem.
Thx again to Dexer125 for his help!
Sent from my dipper using XDA Labs
Click to expand...
Click to collapse
I can confirm this.
I have been unrooted on stock for a few months now and have had no problems since then.
Hello, I have the slow issue (Androbench app with poor performances) after several dates when I have rooted my phone: Mi8 Chinese version with stock global ROM.
After unroot the phone, several days after, the phone works fine with Androbench app with good performances.
I need root my phone to use Magisk hide for Google Pay in order to avoid the Google block for contactless payment.
Can anybody help me about the understanding of this behaviour?
I do not know the reason why the phone is slow after root and why the phone works fine after several days after rooting.
Thanks in advance. Regards
roberbas said:
Hello, I have the slow issue (Androbench app with poor performances) after several dates when I have rooted my phone: Mi8 Chinese version with stock global ROM.
After unroot the phone, several days after, the phone works fine with Androbench app with good performances.
I need root my phone to use Magisk hide for Google Pay in order to avoid the Google block for contactless payment.
Can anybody help me about the understanding of this behaviour?
I do not know the reason why the phone is slow after root and why the phone works fine after several days after rooting.
Thanks in advance. Regards
Click to expand...
Click to collapse
Hi,
Mine has hardware issue (rooted).
Didn't try to unroot it if there is a difference like you describe.
Can't help you with magisk hide. I don't use it.
I have this issue with my mi 8 guys, just happened yesterday
So flashing the latest official rom via miflash is the way to fix it?
Irish_Dude said:
I have this issue with my mi 8 guys, just happened yesterday
So flashing the latest official rom via miflash is the way to fix it?
Click to expand...
Click to collapse
Hello, yes in my case. Sometimes, with wipe all, internal storage included, the problem it solved.
Recently I have the issue again without root: only with custom rom flashed. Several times the issue was reproduced out of my habitual site during vacances.
Thanks

Categories

Resources