Database Develop

[Q] HELP ME PLZ MY GALAXY s IS BRICKED

LOOK I WOS INSTALL THE FRIMEWARE VIA ODIN AND I lost electric power AND PROCESS FAILED NOW I DO AGIN ENTER TO DL MOD AND START INSTALLL BUT ITS VERY VERY SLOWWW HELPPPP !

seah87 said:
LOOK I WOS INSTALL THE FRIMEWARE VIA ODIN AND I lost electric power AND PROCESS FAILED NOW I DO AGIN ENTER TO DL MOD AND START INSTALLL BUT ITS VERY VERY SLOWWW HELPPPP !
Click to expand...
Click to collapse
a little bit more info would be nice.....
what ROM did you flash before...
wich ODIN versio are you using.
??????

richard2311 said:
a little bit more info would be nice.....
what ROM did you flash before...
wich ODIN versio are you using.
??????
Click to expand...
Click to collapse
i wos using odin 1.7 i wos flashed jvb rom and i wos have before jvk rom than electric power gone and comp shutdown and now when i enter to dl mode and start it agin it only staying and whrite:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_XWJVB_Sbl.tar.md5 is valid.
<OSM> PHONE_XXJVK.tar.md5 is valid.
<OSM> CSC_XEE_JV3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
5 hours wating dl dont start !!!!!!!!!!!!!!!!!!!!!!

Remove the battery for a while and try again.

seah87 said:
i wos using odin 1.7 i wos flashed jvb rom and i wos have before jvk rom than electric power gone and comp shutdown and now when i enter to dl mode and start it agin it only staying and whrite:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_XWJVB_Sbl.tar.md5 is valid.
<OSM> PHONE_XXJVK.tar.md5 is valid.
<OSM> CSC_XEE_JV3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
5 hours wating dl dont start !!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
shouldn't there also be a line from PIT512 file ????
did you use pit512 and repartition???

i use 512 pit but not use repatiton

seah87 said:
i use 512 pit but not use repatiton
Click to expand...
Click to collapse
if you use PIT file in V1.7, repatition get auto checked.....
you can try flashing it with V1.3, use PIT512 and check repartition mannualy
http://dl.dropbox.com/u/19506141/flash en drivers/Odin_+_pit.exe
and here the latest XWJVH with safe bootloaders...try flashing these
http://dl.dropbox.com/u/19506141/Stock - stock modems/GT_I9000_XWJVH_XXJVO_NEEJV3_Sbl.exe
and if you may need them USB drivers for PC.
http://dl.dropbox.com/u/19506141/flash en drivers/SAMSUNG_USB_Driver_for_Mobile_Phones.exe

Thanx all i sloved problem thanks to Virtualsk

Need help flashing a Rom!!!!

I succesfully flashed Fusion V2 in my GNote. I've being trying to flash thru Odin a Stock Rom since I just prefer Stock. I flashed a GB Kernel, I think its called Abyss (sorry If I Mispell). And then try to flash the Stock ICS Rom. The process stops at:
FactoryFS.img
Nand write Start.
It stops right there.
What should I do????
Sorry for my english.

kindly post your full error log here, whether it was stopped with msg successfull0/failed 1 Or it was stuck?

dr.ketan said:
kindly post your full error log here, whether it was stopped with msg successfull0/failed 1 Or it was stuck?
Click to expand...
Click to collapse
The thing is that Odin doesnt show any error, it just stops. I waited 30mins and nothing so I unplugged the phone. The phone didnt show a download bar. The phone was in download mode.

That is really bad sign
Any way download any Stock GB ROM
and flash again with pit file
If your device is 16GB model (not 32GB) then use this pit with re partition option enable on PC Odin
http://d-h.st/FVh

dr.ketan said:
That is really bad sign
Any way download any Stock GB ROM
and flash again with pit file
If your device is 16GB model (not 32GB) then use this pit with re partition option enable on PC Odin
http://d-h.st/FVh
Click to expand...
Click to collapse
Yes is a 16gb model. Where can I get the Pit file?

I have pasted link in my previous post, And you have quoted too.

darielsantana said:
Yes is a 16gb model. Where can I get the Pit file?
Click to expand...
Click to collapse
Perfect just saw the download link.
Ill try that once I get home.
Btw your posts are great. Thanks for them.

dr.ketan said:
I have pasted link in my previous post, And you have quoted too.
Click to expand...
Click to collapse
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKK3_N7000ODDKK1_N7000DDKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
Im trying to flash the GB Rom with the Pit file you gave me and thats the msg I get. Is this process really slow or am I having trouble?
I have around 10mins waiting and nothing else is happening

darielsantana said:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKK3_N7000ODDKK1_N7000DDKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
Im trying to flash the GB Rom with the Pit file you gave me and thats the msg I get. Is this process really slow or am I having trouble?
I have around 10mins waiting and nothing else is happening
Click to expand...
Click to collapse
Got this error!!!
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKK3_N7000ODDKK1_N7000DDKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)

It appears ODIN is struggling to find your device, Do you have the correct drivers installed ? Have you exited kies (including system tray?) Have you tried alternative USB ports ? Preferably direct into the MoBo (back of tower?) What shows up in ODIN when you connect your phone in download mode ?

azzledazzle said:
It appears ODIN is struggling to find your device, Do you have the correct drivers installed ? Have you exited kies (including system tray?) Have you tried alternative USB ports ? Preferably direct into the MoBo (back of tower?) What shows up in ODIN when you connect your phone in download mode ?
Click to expand...
Click to collapse
Now it connected but when trying to Flash Stock GB it shows this:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKKA_N7000OXXKK6_N7000XXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
<ID:0/007> factoryfs.img
whats happening? why cant i flash the rom??

How log has it been stuck like that for ??
Usually sticking at factoryfs.img is not a good sign, You can use the unbrick method to repartition the phone and get you up and running again, However you will lose some space (2-3gb)
Here's the link http://forum.xda-developers.com/showthread.php?t=1667886
I would wait for some confirmation from someone else firstly, Someone like the god himself - Dr.Ketan
Ive never bricked my note so luckily ive never had to try that method ^^

azzledazzle said:
How log has it been stuck like that for ??
Usually sticking at factoryfs.img is not a good sign, You can use the unbrick method to repartition the phone and get you up and running again, However you will lose some space (2-3gb)
Here's the link http://forum.xda-developers.com/showthread.php?t=1667886
I would wait for some confirmation from someone else firstly, Someone like the god himself - Dr.Ketan
Ive never bricked my note so luckily ive never had to try that method ^^
Click to expand...
Click to collapse
Yeah I followed that method but only can flash Custom Roms after the repartition. I dont know what to do :S. I've being waiting his reply.

Why can you only flash custom ROMs ? Cant you flash a stock one via ODIN but include the patched .pit file ?
Sorry im of no use

azzledazzle said:
Why can you only flash custom ROMs ? Cant you flash a stock one via ODIN but include the patched .pit file ?
Sorry im of no use
Click to expand...
Click to collapse
I cant flash stock rom with pit file given :s
Its ok at least someone is trying to help

Do you have warranty ?? You could flash a stock ROM without pit, which will put your phone back into the bricked state, Then send it off for warranty ?

azzledazzle said:
Do you have warranty ?? You could flash a stock ROM without pit, which will put your phone back into the bricked state, Then send it off for warranty ?
Click to expand...
Click to collapse
no warranty

Why dont you have warranty ? All Samsungs come with at least 12-24 months manufacturer warranty.

azzledazzle said:
Why dont you have warranty ? All Samsungs come with at least 12-24 months manufacturer warranty.
Click to expand...
Click to collapse
well i might have but I bought in Ebay. And live at Dominican Republic. There is no Samsung representative over here. And I dont have a Bill.

Well hold on for some other opinions, But if you dont get a solution then consider sending it to samsung, They should repair it, However you might have to pay postage charges, Give them a call first and blame it on a OTA / Kies update

[Q] Flashing never finishes

Hi,
I own Samsung Galaxy S Plus. I've been using GIGABREAD+ ROM but since I want my warranty back I tried to restore stock ROM but failed so far. First I tried flashing stock ROM directly, using Odin but it displayed "<1> big partition size!!" and than "<1> something.bin download.." and for a few hours nothing happened. Then i restored my phone and tried Broodrom rc5 but same thing happens :"<1> big partition size!!" and "<1> partition.bin download.." taking forever. Do you know how to solve this problem?
P.S sorry if topic already appeared but couldn't find it. sorry for my english too.

You have to put the repartition flag on Odin.
But use with carefully, you need a ROm that support repartition.
Otherwise you risk brick your device

casaprocida said:
You have to put the repartition flag on Odin.
But use with carefully, you need a ROm that support repartition.
Otherwise you risk brick your device
Click to expand...
Click to collapse
Thanks, but how do I do that?

Try This HERE

EwOkie said:
Try This HERE
Click to expand...
Click to collapse
Thank you. Please correct me if I'm wrong. I am supposed to download older version of Odin, since 4.43 doesn't have PIT option, and then use it with PIT to repartition and flash with stock ROM?

1.85 ODIN is fine thats what i use Check my signature on How To to Flash with ODIN

Yeah Odin 1.85, 512 pit file, repartition checked, and flash gingerbread jw4 would do nicely.
You will also have to flash dbdata.rfs as PDA in Odin after the rom if you get 'can't mount' rfs error.<<<< Actually, you probably won't need that because you're still GB-based.
Then just reboot and profit.
Sent from my GT-I9000 using Tapatalk 2

Okay, one more question before I start. In a package of stock rom i downloaded there is a file called "APBOOT_I9001XXKQ6_CL980980_REV00_user_low_ship_ONLY.tar.md5". As I understand it's bootloader files. Am I supposed to falsh this too?
knuckles1978 said:
Yeah Odin 1.85, 512 pit file, repartition checked, and flash gingerbread jw4 would do nicely.
You will also have to flash dbdata.rfs as PDA in Odin after the rom if you get 'can't mount' rfs error.<<<< Actually, you probably won't need that because you're still GB-based.
Then just reboot and profit.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse

amkxxx said:
Okay, one more question before I start. In a package of stock rom i downloaded there is a file called "APBOOT_I9001XXKQ6_CL980980_REV00_user_low_ship_ONLY.tar.md5". As I understand it's bootloader files. Am I supposed to falsh this too?
Click to expand...
Click to collapse
Try it without the bootloader first. Unnecessarily flashing a bootloader is better avoided. I have a gt-i9000, not a 9001 and I've not had a bootloader included with a ROM before, but I know to only flash bootloaders when you have to, or you can end up in a world of hurt.
Sent from my Nexus 7 using Tapatalk HD

I tried flashing but nothing happened, and I mean nothing. phone is as it was. here's odins output:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SMD_PDA_I9001XXKQ6_CL980980_REV00_user_low_ship_EMMC.smd.md5 is valid.
<OSM> SMD_MODEM_I9001XXKPK_CL977162_REV00_user_low_ship_EMMC.smd.md5 is valid.
<OSM> SMD_CSC_GT-I9001-CSC-SERKP7_EMMC.smd.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<OSM> All threads completed. (succeed 0 / failed 1)

amkxxx said:
I tried flashing but nothing happened, and I mean nothing. phone is as it was. here's odins output:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SMD_PDA_I9001XXKQ6_CL980980_REV00_user_low_ship_EMMC.smd.md5 is valid.
<OSM> SMD_MODEM_I9001XXKPK_CL977162_REV00_user_low_ship_EMMC.smd.md5 is valid.
<OSM> SMD_CSC_GT-I9001-CSC-SERKP7_EMMC.smd.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Like I said, I have a gti9000, not a 9001, so your flashing files are a bit different, but if I were you I'd try downloading a different stock firmware, could be a dodgy download, seen that plenty of times.
Sent from my Nexus 7 using Tapatalk HD

Solved
I used same rom but witch odin 4.43 and somehow it worked, even though it displayed "big partition!" error. So I'm back on stock. Thaks for all your help!

Samsung galaxy Note GT-N7000 bricked. Need HELP!!

The phone shows " Firmware upgrade issue encountered an issue. Please select recovery mode in Kies & try again". I cant go to recovery mode ie. vol up+home+power. THings I have tried:
1. with Kies the device isnt recognised. I have updated the driver as well.
2. with odin every thing fails... flashing "all samsung recovery.tar", flashing stock jelly bean, flashing .pit file
I have googled for days and tried many things but isnt working. Need help

Where and why the stock firmware flashing is going wrong?

nokiamodeln91 said:
Where and why the stock firmware flashing is going wrong?
Click to expand...
Click to collapse
Hello,
Now the odin is not even recognising the device, Before it couldnt perforn the NAND write.

Start fresh... Remove battery and let the phone rest for couple of minutes.. Then try again.. Just go ahead and flash a stock rom. And check where it fails.

nokiamodeln91 said:
Start fresh... Remove battery and let the phone rest for couple of minutes.. Then try again.. Just go ahead and flash a stock rom. And check where it fails.
Click to expand...
Click to collapse
I had done what you've suggested. It dint work. The message in the odin3 v3.04 when trying to flash stock jellybean was
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N7000XXLSZ_N7000OXALSZ_906407_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)

loveandroider said:
I had done what you've suggested. It dint work. The message in the odin3 v3.04 when trying to flash stock jellybean was
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N7000XXLSZ_N7000OXALSZ_906407_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Where did you download this file from? SAMmobile?
Try redownloading the file, it may be corrupted during download.

AutumQueen92 said:
Where did you download this file from? SAMmobile?
Try redownloading the file, it may be corrupted during download.
Click to expand...
Click to collapse
Hello. I can say that the file isnt corrupt because I have flash that ROM a numerous time before. But until the last time when I was flashing custom rom night owl lollypop version, it stuck in boot loop and then when I tried to flash that , it dint work. Now I cant even go to recovery mode.

loveandroider said:
Hello. I can say that the file isnt corrupt because I have flash that ROM a numerous time before. But until the last time when I was flashing custom rom night owl lollypop version, it stuck in boot loop and then when I tried to flash that , it dint work. Now I cant even go to recovery mode.
Click to expand...
Click to collapse
As the log say "<ID:0/003> SetupConnection.." and not move ahead.. there is some connection problem with Phone and PC... Could be a driver problem.. or Kies might be running in the background...
There is no writing of data what so ever.

I tried in another laptop and it worked. My mobile was dead for weeks and its back to life. But I had samsung driver. I dint have Kies installed. dont know was the problem in connection. Anyways thanks to nokiamodeln91 and AutumQueen92 :good:

Help Needed to Flash Stock Rom for Samsung GT-I9001

Dear altruists,
My phone (Samsung GT-I9001) is virus affected. All apps on the phone doesn't run & force close pop-up appears. So I want to flash it to stock rom. I have downloaded the stock rom from samfirmware & now trying to flash it in downloading mode using odin. I am now stuck on the following step from last few hours-
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9001XXKPU_I9001XXKPH_I9001OXAKP1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
Next steps doesn't comes. What can I do?
Notes-
I have samsung drivers for mobile phones installed.
Trying using odin v3.07

@guljarsust if I remember well, you need Odin 4.43, the only version compatible with AriesVE
tetakpatalked from N7100