Dear altruists,
My phone (Samsung GT-I9001) is virus affected. All apps on the phone doesn't run & force close pop-up appears. So I want to flash it to stock rom. I have downloaded the stock rom from samfirmware & now trying to flash it in downloading mode using odin. I am now stuck on the following step from last few hours-
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9001XXKPU_I9001XXKPH_I9001OXAKP1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
Next steps doesn't comes. What can I do?
Notes-
I have samsung drivers for mobile phones installed.
Trying using odin v3.07
@guljarsust if I remember well, you need Odin 4.43, the only version compatible with AriesVE
tetakpatalked from N7100
Related
Hi so about a week ago I flashed the 2.3.3 gingerbread bootloaders and stock gingerbread rom using this method: http://forum.xda-developers.com/showthread.php?t=1045734
Then I flashed GR-11, then Continuum v5.3, and then Perception II Beta 3. Then I decided to flash back to stock 2.1 using Odin one click. But now I want to flash the 2.3.3 bootloaders and gingerbread stock rom again by using the same method (http://forum.xda-developers.com/showthread.php?t=1045734), but now everytime i try to reflash them, it fails.
this is what odin says specifically: <ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_XWJVB_Sbl.tar.md5 is valid.
<OSM> PHONE_XXJVK.tar.md5 is valid.
<OSM> CSC_NEE_JV3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone help? I tried searching for this but could not find it so sorry if there is another thread about this :\
make sure "repartition" is selected" ?
Yes I did that I followed the directions from the link exactly. Am i supposed to pull out the sim card or something?
Just wondering - did you have the phone in download mode?
When i had it plugged into odin, yeah. My phone doesnt have the 3 button fix so i had to use adb reboot download and then i disconnected it and opened odin and plugged it back in. Should i just use my jig to put it into download mode instead of using adb because that could interrupt it or something?
Switch usb ports on your pc, make sure it's on the back connected to the motherboard, not a front port our a hub.
I tried that too with no luck :'(
LOOK I WOS INSTALL THE FRIMEWARE VIA ODIN AND I lost electric power AND PROCESS FAILED NOW I DO AGIN ENTER TO DL MOD AND START INSTALLL BUT ITS VERY VERY SLOWWW HELPPPP !
seah87 said:
LOOK I WOS INSTALL THE FRIMEWARE VIA ODIN AND I lost electric power AND PROCESS FAILED NOW I DO AGIN ENTER TO DL MOD AND START INSTALLL BUT ITS VERY VERY SLOWWW HELPPPP !
Click to expand...
Click to collapse
a little bit more info would be nice.....
what ROM did you flash before...
wich ODIN versio are you using.
??????
richard2311 said:
a little bit more info would be nice.....
what ROM did you flash before...
wich ODIN versio are you using.
??????
Click to expand...
Click to collapse
i wos using odin 1.7 i wos flashed jvb rom and i wos have before jvk rom than electric power gone and comp shutdown and now when i enter to dl mode and start it agin it only staying and whrite:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_XWJVB_Sbl.tar.md5 is valid.
<OSM> PHONE_XXJVK.tar.md5 is valid.
<OSM> CSC_XEE_JV3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
5 hours wating dl dont start !!!!!!!!!!!!!!!!!!!!!!
Remove the battery for a while and try again.
seah87 said:
i wos using odin 1.7 i wos flashed jvb rom and i wos have before jvk rom than electric power gone and comp shutdown and now when i enter to dl mode and start it agin it only staying and whrite:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_XWJVB_Sbl.tar.md5 is valid.
<OSM> PHONE_XXJVK.tar.md5 is valid.
<OSM> CSC_XEE_JV3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
5 hours wating dl dont start !!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
shouldn't there also be a line from PIT512 file ????
did you use pit512 and repartition???
i use 512 pit but not use repatiton
seah87 said:
i use 512 pit but not use repatiton
Click to expand...
Click to collapse
if you use PIT file in V1.7, repatition get auto checked.....
you can try flashing it with V1.3, use PIT512 and check repartition mannualy
http://dl.dropbox.com/u/19506141/flash en drivers/Odin_+_pit.exe
and here the latest XWJVH with safe bootloaders...try flashing these
http://dl.dropbox.com/u/19506141/Stock - stock modems/GT_I9000_XWJVH_XXJVO_NEEJV3_Sbl.exe
and if you may need them USB drivers for PC.
http://dl.dropbox.com/u/19506141/flash en drivers/SAMSUNG_USB_Driver_for_Mobile_Phones.exe
Thanx all i sloved problem thanks to Virtualsk
Hi guys,
Im trying to root my I9305 and Oding keeps getting stuck.
Following this thread to the T and all i can come up with, is this log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9305_CWM_Recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Im using the cable it came with, in a working port.....
Ok so i just decided to try for some reason putting the CWM file on and install it through recovery....it failed....so i went back to DL mode and tried the flash again....and hey presto, it worked!
not exactly sure why, maybe being in recovery, my computer picked up the missing driver to make it all work, but so far it seems the have magically solved itself :good:
thanks XDA, your the best
I was coming back from CM 9.1 to Stock GB. I did wipe like Phillz stuff said, but I got stuck on:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000UBKK3_N7000UBKK1_N7000ZTOKK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
What do I do Now?
It looks like you are still on recovery mode. Go to advanced and choose reboot download. Then restart the procedure. If phone is off, the press vol downl+power+home then after a confirmation screen press vol up.
provettirodolfo said:
I was coming back from CM 9.1 to Stock GB. I did wipe like Phillz stuff said, but I got stuck on:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000UBKK3_N7000UBKK1_N7000ZTOKK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
What do I do Now?
Click to expand...
Click to collapse
In addition to what nokia told you, check that the drivers are installed in your PC and that here is no kies process running in the task manager.
hi,
well i have a galaxy gear v700, and i tryed to flash it before but i couldnt do well, after it i think it has a brick . but using this tutorial http://forum.xda-developers.com/showthread.php?t=2776157 i give my watch a new life, now i want to upgrade to tizen and i cant, kies tell me that the firmware was modify and no upgrade avable, and when i try to put a rom odin doesnt load, and stop on the last point that i show here what can i do to upgrade to tizen
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> kernel-GB-3a.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
my Smart Watch Bloked
samsung tizen not responding
sir,
i own a samsung tizen z1 ,the device is not responding only logo sign is shown, i decided to flash it but md5 bootloader is locked so not able to flash -using odin software i need bootloader file to flash it and unlock it.. plz help
radekamilo said:
hi,
well i have a galaxy gear v700, and i tryed to flash it before but i couldnt do well, after it i think it has a brick . but using this tutorial http://forum.xda-developers.com/showthread.php?t=2776157 i give my watch a new life, now i want to upgrade to tizen and i cant, kies tell me that the firmware was modify and no upgrade avable, and when i try to put a rom odin doesnt load, and stop on the last point that i show here what can i do to upgrade to tizen
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> kernel-GB-3a.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
Click to expand...
Click to collapse