Database Develop

[Q] Odin Flash Problem

Hello
I have problem with odin i can't flash
My phone is bricked if i open my phone there is a sign like phone --- caution sign ---- computer but i can open download mode i want to flash 2.3.3 JVB stock rom
i have 3 files pda phone and csc i do re-partition auto reboot f. reset time on and dump phone efs clear and phone bootloader update not. In flashing it says
<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_XXJVK_Sbl.tar.md5 is valid.
<OSM> PHONE_XXJVK.tar.md5 is valid.
<OSM> CSC_OXAJVK.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
and it sucks what can i do

http://forum.xda-developers.com/showthread.php?t=818556
Block 2 method .
Number 12 and you have 2.3.3 further steps and the Darky rom is your choice .
jje

JJEgan said:
http://forum.xda-developers.com/showthread.php?t=818556
Block 2 method .
Number 12 and you have 2.3.3 further steps and the Darky rom is your choice .
jje
Click to expand...
Click to collapse
thanks I'm trying now

[Q] Updating to 2.3.3 Gingerbread Stock ROM with Bootloaders

Hi so about a week ago I flashed the 2.3.3 gingerbread bootloaders and stock gingerbread rom using this method: http://forum.xda-developers.com/showthread.php?t=1045734
Then I flashed GR-11, then Continuum v5.3, and then Perception II Beta 3. Then I decided to flash back to stock 2.1 using Odin one click. But now I want to flash the 2.3.3 bootloaders and gingerbread stock rom again by using the same method (http://forum.xda-developers.com/showthread.php?t=1045734), but now everytime i try to reflash them, it fails.
this is what odin says specifically: <ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_XWJVB_Sbl.tar.md5 is valid.
<OSM> PHONE_XXJVK.tar.md5 is valid.
<OSM> CSC_NEE_JV3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone help? I tried searching for this but could not find it so sorry if there is another thread about this :\

make sure "repartition" is selected" ?

Yes I did that I followed the directions from the link exactly. Am i supposed to pull out the sim card or something?

Just wondering - did you have the phone in download mode?

When i had it plugged into odin, yeah. My phone doesnt have the 3 button fix so i had to use adb reboot download and then i disconnected it and opened odin and plugged it back in. Should i just use my jig to put it into download mode instead of using adb because that could interrupt it or something?

Switch usb ports on your pc, make sure it's on the back connected to the motherboard, not a front port our a hub.

I tried that too with no luck :'(

[Q] Question.

I was wandering if anyone could create a backup from from the firmware that I will provide, since I can´t load my phone using Odin 4.07 because it will crash and close on my PC, so all I need is to someone to load it into their Ace, use CWM to create a backup rom, and load it here so I can just use my CWM and load it into my phone?
Here´s the firmware, if any one would like to help me recover my phone to it´s original fw, since this wasn´t in Samfirmware.
http://www.hotfile.com/dl/184799313/0a34cc8/S5830MWHLK2_S5830MICELK1_ICE.zip.html

Mike02x said:
I was wandering if anyone could create a backup from from the firmware that I will provide, since I can´t load my phone using Odin 4.07 because it will crash and close on my PC, so all I need is to someone to load it into their Ace, use CWM to create a backup rom, and load it here so I can just use my CWM and load it into my phone?
Here´s the firmware, if any one would like to help me recover my phone to it´s original fw, since this wasn´t in Samfirmware.
http://www.hotfile.com/dl/184799313/0a34cc8/S5830MWHLK2_S5830MICELK1_ICE.zip.html
Click to expand...
Click to collapse
LOL!!! ODIN 4.07 WHAAT???
Did you try using Odin 4.38????

Viper The Ripper said:
LOL!!! ODIN 4.07 WHAAT???
Did you try using Odin 4.38????
Click to expand...
Click to collapse
My bad, I meant Odin 4.38 and also Odin 3.07.

flashing other device nandroid backup can cause problem try using odin in some other pc

Mike02x said:
My bad, I meant Odin 4.38 and also Odin 3.07.
Click to expand...
Click to collapse
Unistall kies and samsung drivers, reboot your PC and install the lastest driver update then try again
You can flash a custom rom too via recovery

manoj94 said:
flashing other device nandroid backup can cause problem try using odin in some other pc
Click to expand...
Click to collapse
Thanks!
Will try in another device!
Also this is what happens, when I try to use Odin3 v1.85
Code:
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830MWHLK2_S5830MICELK1_S5830MWHLK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
And it just hangs in there forever!
Thanks!

Mike02x said:
Thanks!
Will try in another device!
Also this is what happens, when I try to use Odin3 v1.85
Code:
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830MWHLK2_S5830MICELK1_S5830MWHLK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
And it just hangs in there forever!
Thanks!
Click to expand...
Click to collapse
... Is your phone model GT-S5830? or GT-S5830M?? Beacuse I think you are flashing an incorrect firmware or .ops file or whatever related with your device model so check out carefully

Viper The Ripper said:
... Is your phone model GT-S5830? or GT-S5830M?? Beacuse I think you are flashing an incorrect firmware or .ops file or whatever related with your device model so check out carefully
Click to expand...
Click to collapse
GTS5830

Mike02x said:
GTS5830
Click to expand...
Click to collapse
So that's what I was saying you, this firmware (S5830MWHLK2_S5830MICELK1_ICE.zip) is a GT-S5830M firmware!! Please go to sammobile and download a correct firmware!!

Mike02x said:
Thanks!
Will try in another device!
Also this is what happens, when I try to use Odin3 v1.85
Code:
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830MWHLK2_S5830MICELK1_S5830MWHLK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
And it just hangs in there forever!
Thanks!
Click to expand...
Click to collapse
here s detailed instruction with files http://yagyagaire.blogspot.in/2012/03/upgrading-galaxy-ace-to-s5830ddkq8.html#.Ub00ClyVhw0

manoj94 said:
here s detailed instruction with files http://yagyagaire.blogspot.in/2012/03/upgrading-galaxy-ace-to-s5830ddkq8.html#.Ub00ClyVhw0
Click to expand...
Click to collapse
Well, I think we've a great tutorial HERE so...

Help Needed to Flash Stock Rom for Samsung GT-I9001

Dear altruists,
My phone (Samsung GT-I9001) is virus affected. All apps on the phone doesn't run & force close pop-up appears. So I want to flash it to stock rom. I have downloaded the stock rom from samfirmware & now trying to flash it in downloading mode using odin. I am now stuck on the following step from last few hours-
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9001XXKPU_I9001XXKPH_I9001OXAKP1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
Next steps doesn't comes. What can I do?
Notes-
I have samsung drivers for mobile phones installed.
Trying using odin v3.07

@guljarsust if I remember well, you need Odin 4.43, the only version compatible with AriesVE
tetakpatalked from N7100

Phone starts only in "downloading mode"

Hello
My phone starts only in "downloading mode".
My phone: Galaxy Note 8 SM-N950F
Downloaded firmware: N950FXXS8DSK5/N950FOXM8DSK1/N950FXXS8DSK1/N950FXXS8DSK5
I had root. I switched OEM and the phone has not started. I decided to upload the original software but Odin stopped and showed an error. Since then, the phone starts only in downloading. Take a look at the pictures ... this downloading is not normal:
attachment "myphone.jpg"
there is no information as during normal uploading:
attachment: "normal.jpg"
I cannot turn off the phone with the power button. I can only reset by holding VolUP and Power. After restart I have a black screen, I can't turn on the phone. The phone starts automatically after about 1 hour in Downloading mode.
Odin shows:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Added!!
<ID:0/011> Odin engine v(ID:3.1401)..
<ID:0/011> File analysis..
<ID:0/011> Total Binary size: 6116 M
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse

Attachments have not been added

dippaolo said:
Attachments have not been added
Click to expand...
Click to collapse
I can't find any help on this with Google!
Have you tried flashing TWRP again? Then you could try flashing a rom, so at least you have a working device for now.

YES. When uploading TWRP, Odin stops at:
Odin ver 3.12, 3.13, 3.14.
TWRP ver 3.2.1.0,
<ID:0/011> Added!!
<ID:0/011> Odin engine v(ID:3.1203)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse

dippaolo said:
YES. When uploading TWRP, Odin stops at:
Odin ver 3.12, 3.13, 3.14.
TWRP ver 3.2.1.0,
Click to expand...
Click to collapse
I wish I knew how to help you further. Keep bumping the thread in a hope that someone more knowledge knows what to do. :fingers-crossed:

Correction. Not VOLUP + POWER, but the phone only reacts to VOLDOWN + POWER.
The phone only responds to the VOLDOWN + POWER button
The phone does not respond to the POWER button.
Maybe it is worth disconnecting the phone and wait until the battery runs out ...

Flash the correct PIT file with odin and it will work again..had the same issue and it worked for me without loosing data

Should I unpack the PIT file from CSC?

dippaolo said:
Should I unpack the PIT file from CSC?
Click to expand...
Click to collapse
Yes or you download only the pit file