Phone starts only in "downloading mode" - Samsung Galaxy Note 8 Questions and Answers

Hello
My phone starts only in "downloading mode".
My phone: Galaxy Note 8 SM-N950F
Downloaded firmware: N950FXXS8DSK5/N950FOXM8DSK1/N950FXXS8DSK1/N950FXXS8DSK5
I had root. I switched OEM and the phone has not started. I decided to upload the original software but Odin stopped and showed an error. Since then, the phone starts only in downloading. Take a look at the pictures ... this downloading is not normal:
attachment "myphone.jpg"
there is no information as during normal uploading:
attachment: "normal.jpg"
I cannot turn off the phone with the power button. I can only reset by holding VolUP and Power. After restart I have a black screen, I can't turn on the phone. The phone starts automatically after about 1 hour in Downloading mode.
Odin shows:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Added!!
<ID:0/011> Odin engine v(ID:3.1401)..
<ID:0/011> File analysis..
<ID:0/011> Total Binary size: 6116 M
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse

Attachments have not been added

dippaolo said:
Attachments have not been added
Click to expand...
Click to collapse
I can't find any help on this with Google!
Have you tried flashing TWRP again? Then you could try flashing a rom, so at least you have a working device for now.

YES. When uploading TWRP, Odin stops at:
Odin ver 3.12, 3.13, 3.14.
TWRP ver 3.2.1.0,
<ID:0/011> Added!!
<ID:0/011> Odin engine v(ID:3.1203)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse

dippaolo said:
YES. When uploading TWRP, Odin stops at:
Odin ver 3.12, 3.13, 3.14.
TWRP ver 3.2.1.0,
Click to expand...
Click to collapse
I wish I knew how to help you further. Keep bumping the thread in a hope that someone more knowledge knows what to do. :fingers-crossed:

Correction. Not VOLUP + POWER, but the phone only reacts to VOLDOWN + POWER.
The phone only responds to the VOLDOWN + POWER button
The phone does not respond to the POWER button.
Maybe it is worth disconnecting the phone and wait until the battery runs out ...

Flash the correct PIT file with odin and it will work again..had the same issue and it worked for me without loosing data

Should I unpack the PIT file from CSC?

dippaolo said:
Should I unpack the PIT file from CSC?
Click to expand...
Click to collapse
Yes or you download only the pit file

Related

[q] phone maybe bricked after lpy cwm format help!!!

Hi All,
So, I was one of those people who last night decided I needed to have clean install for my newly LPY ICS flashed through odin PC. Obviously, I had not read the warning threads only after my phone got stuck on format and then rebooted and got stuck on logo did I visit XDA and saw the new warning Anyhow, what I had flashed was a rooted version of LPY ICS. Now, I have access to download mode but when I tried to reflash through Odin PC I get a failed attempt with this message !!!
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N7000XXLB2_REV_05_CL1106002.tar.md5 is valid.
<OSM> Rooted_Stock_Odex_N7000XXLC1.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OXALC1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Set PIT file..
<ID:0/013> DO NOT TURN OFF TARGET!!
<ID:0/013> Can't open the specified file. (Line: 1876)
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone please help. I have no idea what I should do

Odin + flash GB Error

I was coming back from CM 9.1 to Stock GB. I did wipe like Phillz stuff said, but I got stuck on:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000UBKK3_N7000UBKK1_N7000ZTOKK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
What do I do Now?
It looks like you are still on recovery mode. Go to advanced and choose reboot download. Then restart the procedure. If phone is off, the press vol downl+power+home then after a confirmation screen press vol up.
provettirodolfo said:
I was coming back from CM 9.1 to Stock GB. I did wipe like Phillz stuff said, but I got stuck on:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000UBKK3_N7000UBKK1_N7000ZTOKK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
What do I do Now?
Click to expand...
Click to collapse
In addition to what nokia told you, check that the drivers are installed in your PC and that here is no kies process running in the task manager.

[Q] Which rom should I flash

A friend of mine has an SCH- I537 that justbstays in Download mode, he was trying to update it and something went wrong, so I looked on SamMobile and there are a lot of versions(Mexico Urugay etc) which one should I flash in Odin?
The phone is from AT&T
Thank you guys
Sent from my D2305 using XDA Free mobile app
Alfred1516 said:
A friend of mine has an SCH- I537 that justbstays in Download mode, he was trying to update it and something went wrong, so I looked on SamMobile and there are a lot of versions(Mexico Urugay etc) which one should I flash in Odin?
The phone is from AT&T
Thank you guys
Sent from my D2305 using XDA Free mobile app
Click to expand...
Click to collapse
Assuming you have the AT&T version of the i537, then look here: http://forum.xda-developers.com/showthread.php?t=2892445
Devo7v said:
Assuming you have the AT&T version of the i537, then look here: http://forum.xda-developers.com/showthread.php?t=2892445
Click to expand...
Click to collapse
thanksssssssssssssss
Alfred1516 said:
thanksssssssssssssss
Click to expand...
Click to collapse
Im having an issue that when Odin says selecting PIT its says FAILED and i can flash the stock rom, i need your help @Devo7v
PD: re-pratition wasnt checked
Alfred1516 said:
Im having an issue that when Odin says selecting PIT its says FAILED and i can flash the stock rom, i need your help @Devo7v
PD: re-pratition wasnt checked
Click to expand...
Click to collapse
Are you flashing the entire Odin package or are you just trying to flash a pit file? What firmware are you currently on and what firmware are you trying to flash? What steps are you taking that it's failing? Can you post the Odin log?
Devo7v said:
Are you flashing the entire Odin package or are you just trying to flash a pit file? What firmware are you currently on and what firmware are you trying to flash? What steps are you taking that it's failing? Can you post the Odin log?
Click to expand...
Click to collapse
Im fixing it and its not mine so i dont know which version it was running,
Today i itried with the Odin_I537UCUBML2.zip and i put the AP on PDA, BL on BOOTLOADER,
CP on Phone; the PIT on the PIT place and CSC on CSC and i got this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I537UCUBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I537UCUBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I537UCUBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_I537ATTBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Added!!
<ID:0/011> Removed!!
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..
<ID:0/011>
<ID:0/011> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I need your help ASAP @Devo7v
thanks
Second try wiith oficial samsung rom and same thng
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I537UBUBNI1_I537TFGBNI1_I537UBUBNI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> FAIL!
<ID:0/011>
<ID:0/011> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)ry with Odin and
Alfred1516 said:
Second try wiith oficial samsung rom and same thng
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I537UBUBNI1_I537TFGBNI1_I537UBUBNI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> FAIL!
<ID:0/011>
<ID:0/011> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)ry with Odin and
Click to expand...
Click to collapse
This last one you tried to flash is never going to work because it's not AT&T i537 Firmware. I would try flashing the NE3 Odin package, it's got the latest bootloader do it should work. Give it a shot and let me know.
Okey I will try to flash the I537UCUCNE3 full package then I will let you know thanks, do I need pit for this o no?
Did iI placed the files in the right order on Odin? @Devo7v
Sent from my D2305 using XDA Free mobile app
Alfred1516 said:
Okey I will try to flash the I537UCUCNE3 full package then I will let you know thanks, do I need pit for this o no?
Did iI placed the files in the right order on Odin? @Devo7v
Sent from my D2305 using XDA Free mobile app
Click to expand...
Click to collapse
I have no idea if you placed them in the right place, but it seems like you did. As long as you follow the instructions and it looks like the pictures you should be fine.
Okey I will, but the CP file goes to the Phone chart right?
But i will do it and i will let you know @Devo7v
Thanks
Sent from my D2305 using XDA Free mobile app
Alfred1516 said:
Okey I will, but the CP file goes to the Phone chart right?
But i will do it and i will let you know @Devo7v
Thanks
Sent from my D2305 using XDA Free mobile app
Click to expand...
Click to collapse
Bootloader = BL
PDA = AP
Phone = CP
CSC = CSC
I know you are having problems with the pit file, the CSC file in the Odin package contains the pit file, so if you're having problems with it maybe you have a corrupted download. Try downloading the package again and checking the MD5 against the one that is posted to ensure they match. Before you try the attached file I would try flashing the CSC file only, it should work.
In either case I've attached the NE3 pit file that I extracted from the Odin package. I'm not sure which slot this needs to be flashed in, but be careful because this could brick your phone. This file cannot be flashed through the phone's recovery, you must extract the zip and flash the pit file inside through Odin.
I placed everything on its place and got the same error.......... Im giving up with this @Devo7v
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_I537ATTCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> FAIL!
<ID:0/011>
<ID:0/011> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Alfred1516 said:
I placed everything on its place and got the same error.......... Im giving up with this @Devo7v
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_I537ATTCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> FAIL!
<ID:0/011>
<ID:0/011> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
It's definitely the AT&T version of the i537 and not the TelCel or Uruguayan version, correct?
It says AT&T on the back cover, is there any other way to confirm that is from AT&T? @Devo7v
Sent from my D2305 using XDA Free mobile app
Alfred1516 said:
It says AT&T on the back cover, is there any other way to confirm that is from AT&T? @Devo7v
Sent from my D2305 using XDA Free mobile app
Click to expand...
Click to collapse
Check the sticker under the battery as well.
It says SGH-i537
Sent from my D2305 using XDA Free mobile app
Alfred1516 said:
It says SGH-i537
Sent from my D2305 using XDA Free mobile app
Click to expand...
Click to collapse
I think you have a bad download then. Try downloading the NE3 package again and try a different version of Odin, 3.07 or 3.09.
Thanks for your help but my friend says he will buy another Mother board or sell the phone, but thanks! a lot
Sent from my D2305 using XDA Free mobile app

Can't Re-Flash Kit Kat; Fails after Set Pit File;There is no PIT partition

I am trying to root Lollipop on my I537 so I flashed back to KK successfully. Towelroot is successful so I flash LP as instructed using Flashfire but I never got rebooted to download mode. I get stuck on the S4 Active boot screen and the device seems to power down. So I boot to download mode manually and flashed the I537_OC7_Bootloader using odin but still cant get past the Active Boot screen. So I am trying to flash back to KK again. I was able to do this before last night but today I can't seem to get the firmware to flash! Can some one help me?
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_I537ATTCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
When I try to flash the I537_OC7_Bootloader it says no pit partition found:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWM-Recovery-gt-i9295_v1-2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
Ok so I got Odin to flash everything from SGH-I537UCUCNE3_v4.4.2_ATT_ALL and even a pit file i found here. Problem is I get the S4A boot screen and it says booting recovery in blue at the top right but then it dies. Any Ideas? I got Odin to flash by using a USB port on back of my PC on the mobo rather then the front USB ports on the case.
I also do not have access to stock recovery even after a successful NE3 flash with Odin! Have I bricked my device or just soft bricked it?
Anyone?

Need help PLEASE! Samsung Galaxy Note 8 SM-N950N Exynos 8895 STUCK IN DOWNLOAD MODE

So I am a poor guy that has a dream of using a Note 8 for this is my dream phone. Somebody post a listing in Facebook that his note 8 is somewhat useless for he don't know what is the problem and he is selling it as a bargain so I grab it.
Now I am stuck with this phone that won't turn on (unless you go and place it on a wireless charger then it will turn on by itself), won't do anything and is stuck with download mode(see photo 1).
I try to flash a SM-N950N firmware using Odin v3.13.1 but I am getting an error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 4226 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
(see photo 2)
Please help me. I really want to have this note 8.
Unfortunately, XDA forums won't allow me to upload pics. You can email me @ [email protected]
Could be that the internal storage is faulty and needs repaired.
iceepyon said:
Could be that the internal storage is faulty and needs repaired.
Click to expand...
Click to collapse
What do you mean internal storage? like the emmc?
eunszette said:
What do you mean internal storage? like the emmc?
Click to expand...
Click to collapse
Yes.
iceepyon said:
Yes.
Click to expand...
Click to collapse
That is sad. Well I try to do it again and I am getting a different error which is
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Flash the root file via odin. That is the easiest way to repartion. This worked for me.
Sent from my SM-N950F using Tapatalk
where is that root file via odin @yashthemw ?
iceepyon said:
Could be that the internal storage is faulty and needs repaired.
Click to expand...
Click to collapse
Hi am wondering if you could help with my Galaxy Note 8
I am able to install the firmware using ODIN without any errors on download mode but after ODIN is finished the phone turns off and does not boot.
I have taken the phone to a repair shop as well and they have confirmed that there is no hardware issues,
truenitos said:
where is that root file via odin @yashthemw ?
Click to expand...
Click to collapse
Just wondering if you got the issue fixed, I have the exact same problem
Many thanks for the help in advance
Yashfauuu said:
Just wondering if you got the issue fixed, I have the exact same problem
Many thanks for the help in advance
Click to expand...
Click to collapse
Here it is, flash it via odin in AP tab.
https://mega.nz/#!ft0mWAJB!DbVu2omeZIHpXvYPGVBJZmKE1ga5_dH4oIUx5WXhkck
Here it is, flash it via odin in AP tab.
https://mega.nz/#!ft0mWAJB!DbVu2omeZ...dH4oIUx5WXhkck
Click to expand...
Click to collapse
I have the same problem. Only download mode available. Cannot turn on the phone after restarting, the phone turns on automatically after about 1 hour.
The above file stops at:
<ID:0/011> Added!!
<ID:0/011> Odin engine v(ID:3.1401)..
<ID:0/011> File analysis..
<ID:0/011> Total Binary size: 6116 M
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
did it will work forme ( N950N) u5
the file in meag is encrypted could you pleasegive us the decription password
my phone stops also like this

Categories

Resources