Hello
I have problem with odin i can't flash
My phone is bricked if i open my phone there is a sign like phone --- caution sign ---- computer but i can open download mode i want to flash 2.3.3 JVB stock rom
i have 3 files pda phone and csc i do re-partition auto reboot f. reset time on and dump phone efs clear and phone bootloader update not. In flashing it says
<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_XXJVK_Sbl.tar.md5 is valid.
<OSM> PHONE_XXJVK.tar.md5 is valid.
<OSM> CSC_OXAJVK.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
and it sucks what can i do
http://forum.xda-developers.com/showthread.php?t=818556
Block 2 method .
Number 12 and you have 2.3.3 further steps and the Darky rom is your choice .
jje
JJEgan said:
http://forum.xda-developers.com/showthread.php?t=818556
Block 2 method .
Number 12 and you have 2.3.3 further steps and the Darky rom is your choice .
jje
Click to expand...
Click to collapse
thanks I'm trying now
Related
LOOK I WOS INSTALL THE FRIMEWARE VIA ODIN AND I lost electric power AND PROCESS FAILED NOW I DO AGIN ENTER TO DL MOD AND START INSTALLL BUT ITS VERY VERY SLOWWW HELPPPP !
seah87 said:
LOOK I WOS INSTALL THE FRIMEWARE VIA ODIN AND I lost electric power AND PROCESS FAILED NOW I DO AGIN ENTER TO DL MOD AND START INSTALLL BUT ITS VERY VERY SLOWWW HELPPPP !
Click to expand...
Click to collapse
a little bit more info would be nice.....
what ROM did you flash before...
wich ODIN versio are you using.
??????
richard2311 said:
a little bit more info would be nice.....
what ROM did you flash before...
wich ODIN versio are you using.
??????
Click to expand...
Click to collapse
i wos using odin 1.7 i wos flashed jvb rom and i wos have before jvk rom than electric power gone and comp shutdown and now when i enter to dl mode and start it agin it only staying and whrite:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_XWJVB_Sbl.tar.md5 is valid.
<OSM> PHONE_XXJVK.tar.md5 is valid.
<OSM> CSC_XEE_JV3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
5 hours wating dl dont start !!!!!!!!!!!!!!!!!!!!!!
Remove the battery for a while and try again.
seah87 said:
i wos using odin 1.7 i wos flashed jvb rom and i wos have before jvk rom than electric power gone and comp shutdown and now when i enter to dl mode and start it agin it only staying and whrite:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_XWJVB_Sbl.tar.md5 is valid.
<OSM> PHONE_XXJVK.tar.md5 is valid.
<OSM> CSC_XEE_JV3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
5 hours wating dl dont start !!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
shouldn't there also be a line from PIT512 file ????
did you use pit512 and repartition???
i use 512 pit but not use repatiton
seah87 said:
i use 512 pit but not use repatiton
Click to expand...
Click to collapse
if you use PIT file in V1.7, repatition get auto checked.....
you can try flashing it with V1.3, use PIT512 and check repartition mannualy
http://dl.dropbox.com/u/19506141/flash en drivers/Odin_+_pit.exe
and here the latest XWJVH with safe bootloaders...try flashing these
http://dl.dropbox.com/u/19506141/Stock - stock modems/GT_I9000_XWJVH_XXJVO_NEEJV3_Sbl.exe
and if you may need them USB drivers for PC.
http://dl.dropbox.com/u/19506141/flash en drivers/SAMSUNG_USB_Driver_for_Mobile_Phones.exe
Thanx all i sloved problem thanks to Virtualsk
Hi All,
So, I was one of those people who last night decided I needed to have clean install for my newly LPY ICS flashed through odin PC. Obviously, I had not read the warning threads only after my phone got stuck on format and then rebooted and got stuck on logo did I visit XDA and saw the new warning Anyhow, what I had flashed was a rooted version of LPY ICS. Now, I have access to download mode but when I tried to reflash through Odin PC I get a failed attempt with this message !!!
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N7000XXLB2_REV_05_CL1106002.tar.md5 is valid.
<OSM> Rooted_Stock_Odex_N7000XXLC1.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OXALC1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Set PIT file..
<ID:0/013> DO NOT TURN OFF TARGET!!
<ID:0/013> Can't open the specified file. (Line: 1876)
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone please help. I have no idea what I should do
Hi,
I was downgrading from JB to GB, while doing odin, it was failed and I removed the battery and tried doing it again, but no use. nothing is happening. Please help. very very urgent.
Your help is higly appreciated.
The odin is freezing at this place.
<ID:0/021> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> APBOOT_I9000XWJVZ_CL762604_REV03_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9000XWJVZ_CL762604_REV03_user_low_ship.tar.md5 is valid.
<OSM> GT-I9000-CSC-HOME-MULTI-OXAJVT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/021> Odin v.3 engine (ID:21)..
<ID:0/021> File analysis..
<ID:0/021> SetupConnection..
<ID:0/021> Initialzation..
<ID:0/021> Set PIT file..
<ID:0/021> DO NOT TURN OFF TARGET!!
Thanks,
Ajay:crying:
Can you describe what happens when you attempt to turn on the phone?
Put a pit file,tick repartition and start again
Inviato dal mio GT-I9000 con Tapatalk 2
Stop any running KIES process while using Odin!
Dear altruists,
My phone (Samsung GT-I9001) is virus affected. All apps on the phone doesn't run & force close pop-up appears. So I want to flash it to stock rom. I have downloaded the stock rom from samfirmware & now trying to flash it in downloading mode using odin. I am now stuck on the following step from last few hours-
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9001XXKPU_I9001XXKPH_I9001OXAKP1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
Next steps doesn't comes. What can I do?
Notes-
I have samsung drivers for mobile phones installed.
Trying using odin v3.07
@guljarsust if I remember well, you need Odin 4.43, the only version compatible with AriesVE
tetakpatalked from N7100
note 8 stuck on "An error has occured while updating the deivce software........"
Hello,
my phone (Galaxy note 8 SM-N950F) have problem that is stuck on screen "An error has occured while updating the device software.Use the Emergency recovery function in the smart Switch PC software"
i can't go to download/recovery mode ,cause when i tried to go to download mode my phone just reboot and when i tried to go to recovery mode my phone is still on that screen. I already use smart switch and that can't solve that problem
i hope you can't help me to fix
YukiArima said:
Hello,
my phone (Galaxy note 8 SM-N950F) have problem that is stuck on screen "An error has occured while updating the device software.Use the Emergency recovery function in the smart Switch PC software"
i can't go to download/recovery mode ,cause when i tried to go to download mode my phone just reboot and when i tried to go to recovery mode my phone is still on that screen. I already use smart switch and that can't solve that problem
i hope you can't help me to fix
Click to expand...
Click to collapse
Just plug it in to the computer and flash N950F firmware and just flash it on that error screen.. It will still flash on that screen.
MrMike2182 said:
Just plug it in to the computer and flash N950F firmware and just flash it on that error screen.. It will still flash on that screen.
Click to expand...
Click to collapse
thanks for your solution friend,but what i got is
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 5866 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and i already try 3 stock rom and all i got is same
YukiArima said:
thanks for your solution friend,but what i got is
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 5866 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and i already try 3 stock rom and all i got is same
Click to expand...
Click to collapse
Which bootloader version are you on and what firmware are you flashing?
For example:
If your on N950FXXU"6"DSF6 your on bootloader version 6 so I would flash any N950FXXU"6".... firmware, you can't flash any firmware below that, so no ver 5 or below
(N950FXXU"5"..... not going to flash). Same goes for 5 , 4 , 3, and 2 bootloaders can't downgrade to lower version!
If you're on multi-CSC OXM (csc N950F"OXM"U6DSF6) use any with the OXM in the firmware name.
Use the home-CSC to keep data intacted!
Or
Use the CSC file to erase data and go back to stock.
If you are coming from a carrier csc phone like OVF to OXM you have to use the CSC file.
Try another usb cable and/or usb port.
Please give more information:
What firmware you are on?
What CSC are you on?
What firmware you tried to flash?
Look at the Download mode screen for Bootloader version and CSC.
edit....
Look for the line:
RP SWVER B: 6 K: 1 S: 1 (the B: 6 is your bootloader version).
BluePhnx said:
Which bootloader version are you on and what firmware are you flashing?
For example:
If your on N950FXXU"6"DSF6 your on bootloader version 6 so I would flash any N950FXXU"6".... firmware, you can't flash any firmware below that, so no ver 5 or below
(N950FXXU"5"..... not going to flash). Same goes for 5 , 4 , 3, and 2 bootloaders can't downgrade to lower version!
If you're on multi-CSC OXM (csc N950F"OXM"U6DSF6) use any with the OXM in the firmware name.
Use the home-CSC to keep data intacted!
Or
Use the CSC file to erase data and go back to stock.
If you are coming from a carrier csc phone like OVF to OXM you have to use the CSC file.
Try another usb cable and/or usb port.
Please give more information:
What firmware you are on?
What CSC are you on?
What firmware you tried to flash?
Look at the Download mode screen for Bootloader version and CSC.
edit....
Look for the line:
RP SWVER B: 6 K: 1 S: 1 (the B: 6 is your bootloader version).
Click to expand...
Click to collapse
Which bootloader version are you on and what firmware are you flashing? i tried N950FXXU3BRA8_N950FOLE2BQKG_XID,N950FXXU3CRE5_N950FOLE3CRE5_XID,N950FXXU6DSF6_N950FOLE6DSF6_XID
what firmware you are on? i don't,cause i can't go to download mode and my phone is suddenly get error
what csc are you on? i don't
What firmware you tried to flash?N950FXXU3BRA8_N950FOLE2BQKG_XID,N950FXXU3CRE5_N950FOLE3CRE5_XID,N950FXXU6DSF6_N950FOLE6DSF6_XID,
have not tried bootloader 4 and 5
YukiArima said:
Which bootloader version are you on and what firmware are you flashing? i tried N950FXXU3BRA8_N950FOLE2BQKG_XID,N950FXXU3CRE5_N950FOLE3CRE5_XID,N950FXXU6DSF6_N950FOLE6DSF6_XID
what firmware you are on? i don't,cause i can't go to download mode and my phone is suddenly get error
what csc are you on? i don't
What firmware you tried to flash?N950FXXU3BRA8_N950FOLE2BQKG_XID,N950FXXU3CRE5_N950FOLE3CRE5_XID,N950FXXU6DSF6_N950FOLE6DSF6_XID,
have not tried bootloader 4 and 5
Click to expand...
Click to collapse
You can not get into download mode with power+bixby+vol-down at all?
Can you get into recovery mode?
If you can try doing a factory reset or selecting the option to boot into download mode.
Try using Samsung smart switch on pc to do a factory recovery.
Or visit a Samsung repair store.
plz help
hello i have the same problem & i did what you told him to do only that i didnt try flashing the stock firmware i tried flashing the rooted firmware that i origenaly wanted to flash now im stock at the upload screen and it wont boot to any other screen & how do i know what bootloader version it has BTW i didnt check or save any of the devices info ooops...:crying: and also i have a differnt version of note 8 it is the snapdragon version sm-n950u1 can you guys help plz??? Iv been at this for three days now & at this point i just want to get my phone up and running again so this is what it says..........=
[ UPLOAD MODE ]
Unknow Error
-------------------------------------------
DDR Vendor : Samsung
SOC_HW_REVISION : 2.1
skip print_summary_to_lcd...
Generating summary...
>>General Info
>>DDR Info
>>DCVS Info
>>RPM
>>TrustZone
>>Hypervisor
Done!
thanks in advance
mrbigruben said:
hello i have the same problem & i did what you told him to do only that i didnt try flashing the stock firmware i tried flashing the rooted firmware that i origenaly wanted to flash now im stock at the upload screen and it wont boot to any other screen & how do i know what bootloader version it has BTW i didnt check or save any of the devices info ooops...:crying: and also i have a differnt version of note 8 it is the snapdragon version sm-n950u1 can you guys help plz??? Iv been at this for three days now & at this point i just want to get my phone up and running again so this is what it says..........=
[ UPLOAD MODE ]
Unknow Error
-------------------------------------------
DDR Vendor : Samsung
SOC_HW_REVISION : 2.1
skip print_summary_to_lcd...
Generating summary...
>>General Info
>>DDR Info
>>DCVS Info
>>RPM
>>TrustZone
>>Hypervisor
Done!
thanks in advance
Click to expand...
Click to collapse
You are probably better off asking for help in the thread of the rom you tried to flash (try seaching on the thread for the same problem as yours first), or creating your own thread to ask for help.