Hi
I think i may have got some water damage on my phone. My home button has stopped working but the other two at either side of it are still fine. The thing is i can still use it to get into recovery.download mode. Has anyone had this problem? Is there anything i can do?
I have been reading about a softkey that can be used if home button dead. Is that a program or part of a rom?
Thanks in advance
James
Slim Bean rom has soft keys, such as Home, available.
Related
Alright my At&t tilt front face buttons started to not work (i could only use the arrow buttons and the ok button) and my keyboard stopped working but the arrow keys would. i upgraded the rom after calling htc for help. that didnt fix a thing and now today none of the buttons work. i keep getting the PTT to come up and ask for installation and edfc keeps typing themselves on the screen. so idk if it is a software problem or if the hard ware is malfunctioning.
Damn, I got the same problem. Does anybody know how to fix this?
the same problem here... :/
same problema here.
i already tried another radio, another SPL, another ROM and nothing.
any idea?
Just updating.
Yesterday my tytn started working perfectly again, but today the same problem is occuring. I did nothing, so probably is really a hardware issue.
I have a similar problem.
Send/End + Soft Keys + Keyboard are not working. The issue is not resolved yet?
Wow, this problem just happened to me as well. I've searched everywhere on the net and couldn't find anything.
So is this a pervasive issue? Anyone with any hint as to what might be the source of the problem?
Originally, I thought it the PTT button was stuck in the PRESSED position because the phone behaves as if this button was constantly being pressed. For example my PTT button was mapped to Voice Recorder if the PTT button was held down. The voice recorder constantly comes on everytime I turn the phone on!!
1234567890
I have the exact same problem.
The only change I recently made (two weeks ago) was installing tom tom navigator.
First I thought it was a virus and I installed bull guard, but with no success.
It opens/closes the start menu every second, no buttons work apart from the directional buttons and it writes "edfc" in my textmessages when I turn on/off the screen with the power button.
Most of the time(!) this irritating opening/closing of the start menu only happens after I first turn off/on the screen (with the power button).
I saw this problem described in a post dating back almost two years ago. Someone ought to know the answer to our problems. What does HTC say about it?
I have been lucky and not had this issue yet; but I would recommend starting by flashing the stock rom from HTC. Then hard reset; that will clear everything back to original. If you still experence this after that, then you have a hardware issue. Good luck
This just happened to me this morning. I cant use any buttons and nothing is popping up. This is soo wierd cause the phone was just sitting there overnight!!
Me too...
I have been going nuts with this issue for a couple months now. Makes the phone unusable half the time. I am so disappointed to find that a ROM reload doesn't fix it!! I remapped the 6 key to none and that sort of helps but it was mapped to Voice record before and it would constantly record memos until all the memory was gone in the phone and then it would all crash from there. So frustrating.
I too get the edfc message after I reboot....
It really seems like a virus the way it acts but I guess if it is a hardware issue then it's not a virus.
Anyone ever figure anything out with this? Nothing has changed on my phone recently.
Still an issue?
Holy Toledo fellow Tilt Users. Have you ditched your half-functioning touchscreen, or have we figured out how to solve this issue.
Recently I FOUND THE SAME PROBLEM!
I am going to do what was suggested (original HTC Rom & hard reset) and will let you know if I get the rest of my keyboard back...
All buttons except for power and... NOT WORKING
Outside "Enter" buttons work but they are mapped to Windows key. ? Weird. For some reason the kaiser thinks it is something else. I do not know how it got this way, but there must be a way to convince the hardware of the existence of all my other buttons. The entire keyboard does not work.
Hard Reset & stock HTC Rom did not help. I was surprised that I could hard reset it at all since the two soft buttons are unresponsive to software.
Anyone figure this out yet?
Hi, I got the same issue today as well - Has anyone got rid of this?
So all my physical keys on my xperia x1 including the Volume button, the ok button, the X panel button, the pick up call button, the end call button, the two silver buttons all don't work. None of the keys on my keyboard work either.
I've been trying to hard reset but every method I've found includes holding down the volume button (which doesnt work since that button is unresponsive). I've tried the 2 silver button method along with the poking the stylus in the hard reset hole in the back of the phone but that doesnt work either since the silver buttons are unresponsive.
So now I'm looking for the Clear_Storage thing I've been reading about but I can't find it so could someone please supply me with the directory I could find it in or any other solution you can think of to help me hard reset my phone so I can flash a new ROM.
BTW I've used Hard-SPL to flash roms before, it's just this last ROM from itje got all screwy and made the buttons stop working.
Thanks, Nik
Setting > System > Clear Storage.
Sometimes Itje takes it out of his ROMs, though. You can try reflashing by pc method if it's not there.
Yea I've checked and it's not in there, how would you do it by pc?
Is it that ruu executable that you run while it's synced? For some reason
that never actually worked with my comp which is why I always resorted to the SD Card Flash method, but I can't get into the Hard-SPL loader now cause of the button problem.
Does anyone know how to hard-reset without having to use the hardware buttons, because I really need to be able to use my phone again.
Need Help =/
Next to malfunctioning buttons, is the phone starting up?
What happens, if you plug a USB cable in? If you can select ActiveSync mode, then you could easily try to re-flash another ROM image - maybe the one you have been using was corruptly downloaded or something.
Or, if you get too much of strange behaviour like this, try a stock ROM first, then another custom ROM.
It boots up and works fine as long as I stick to using the touch screen and I can USB ActiveSync it too. I know some of the older ROMs used to have an exe you could run while in ActiveSync and it would auto install but most of the new ROMs assume you're using the SD Card Method so I can't find the PC Installer app.
Alright so I managed to isntall a new version of that Firestorm Rom (3.8 I think) and my hardware buttons still don't work.
Like from the buttons that Works:
Power Button
Camera Button
Optical Joypad (only the center square)
Stuff that doesn't work:
X-Panel Button
Ok Button
Volume Button (up, down, center)
Pick up Call
Hang Up Call
Two Silver Buttons (left and right)
Left and Ride on "D-Pad"
ALL KEYBOARD KEYS
What is their left to do if a new ROM doesn't fix the problem?
what are my options for getting this fixed?
my volume keys dont work, dont know why but sometimes theyre working and sometimes not.
i have the same issue. but my g-letter button works. and all other buttons make the volume go up one notch and then down again. further more when i go into settings and the menu that controls what the buttons it only says it has a left and a right button.
have u been able to figure something out??
began working again
after a month it suddenly started to work again! dont know why or how
is a hardware problem, with your flex.
i can tell you this is hardware problem.flash your phone with orginal spl and orginal rom and send sony ericson.i had same problem.they gave me new unit after 3 months fight good luck.
no doubt, it's hardware problem..
Agree with human75, flash your x1 with stockSPL n original ROM before u send it to SE. Do it via your PC.. Goodluck bro
Hi, I have developed a BIG problem today with my X1. A button (enter button) keeps going off as soon as I start the phone. I have tried to flash a new ROM however this did no good. Its going to be a hardware problem. I managed to install AEBPlus to try and disable the button, however the phone is too fast for me and I cannot get to the right screen to disable it. Short of that I have run out of ideas as to the cause/solution to my problem. Any ideas?
Thanks Hornet
I tried searching the forums but I couldn't find anything about my specific issue.
I have a samsung galaxy s 19000m
The problem is my soft keys, specifically the "go back" key or return key, lags. Sometimes when i press it the light shuts off and it just hangs for awhile and then finally works. The phone is frozen, as I can use the touchscreen just fine. It's like the button is "sticking" because when it freezes if I hit the home key it will take a screenshot.
I was using darkyrom 10.2.2 when it started to happen after a few months. I've recently installed simplicity 2.1 and it still has the problem with the keys, but installing cyanogen mod 7 I haven't had any problems with the key malfunctioning. However, I want to use simplicity 2.1, not cyanogen.
Any solutions as to why this is happening and how to fix it?
Hey guys, I just recently purchased (used), a Verizon Galaxy S3 mini in physically good shape. However, I didn't completely check it out (yeah, my fault majorly). In getting back to my office I noticed that the Home key does not work, also, the "Back" and "Menu" keys also do not light up,nor do they work. So if I am in an app, I can't back out or even go to the home screen. Basically screwed. It has 4.2.2 on it and is completely stock to my knowledge. I cannot get into recovery mode either. So either the home button is not functioning completely, or the phone is really screwed up. Here are a couple of questions. There is no SIM installed, it tells me that, but I should still be able to use it as an android device, just not make normal calls right? If the Home button board is disconnected from the main board, wouldn't the home button not work, but the "back" and "menu" buttons still work, just not light up? I really hope it is something simple, I bought this fairly cheap, but didn't want to spend a ton of money as I can buy one with a warranty for like $100. Any help/ideas are appreciated!