Related
I apologize in advance if this same issue has been replied to elsewhere. I'm in kind of a unique situation and couldn't find an answer anywhere.
I'm got an N1 with 2.3.6 stock ROM, rooted. Recently I downloaded Titanium Backup PRO and while attempting to integrate dalvik cache to ROM, my phone rebooted into a bootloop. I'm assuming this is a bootloop. I get the colorful splash screen, it freezes for a second of two, then continues on, and on, and on....
Is there a way to get me out of this loopwithout having to wipe all my data, so I can backup all my stuff before I flash a custom ROM?
Everything I see about bootloops, mentions unlocking the bootloader and wiping all your data. I've seen downgrading using PASSIMG and loading stock rom. I'd really just like a simple way to get out of this loop hell and get my phone back up. It's in teh ship now getting it's power button fixed.
Thanks in advance
first thing i do on bootloops is pull battery
if no go pull battery and then pwr on by pressing pwr and trackball at same time--you can then get to recovery and maybe wipe dalvik and cache and reboot
i have never used TB for anything other than backup/restores, so can't help with dalvik integration
You might be able to fix it by wiping your cache from recovery.
Sent from my Nexus One using xda premium
Thanks for the advice! I'll give it a try as soon as I get my phone back from being fixed.
Hey guys, I hope you can help. I got my phone back with new power button, Yay! When I try to boot into recovery, teh Nexus X logo comes on for a moment and then I get a white triangle with an orange exclamation point. Do I need to use ADB to try and go to recovery and wipe my cache? I've never installed a recovery image. Do I need to do that or should there be a stock image already on my phone? Am I SOL?
One more thing that might help. I notice that when I go into HBOOT, the phone searching for 4 images from my SD card and can't find them. They go by too fast to write them all down but I think some are PASSIMG, PASSDIAG, etc. Again, do I need to load a recovery like clockworkmod on my phone first and then go into recovery to attempt to wipe my cache?
I get the same passimg all the time--no problem
If your phone came back from repair, you are probably unrooted and hence the triangle. At least that is the way I remember it, but has been two years since I rooted
If that is comfirmed by someone else, you wil need to reroot and install a recovery
A good time, if you haven't, to install android sdk and root/install recovery the right way and have full adb/fastboot features
there other ways I am not familiar with
does the lock show unlocked on the screen, they could have relocked bootloader
the wiki has the instructions, just have to navigate to the htc smartphones and N1
jus to make sure that if u still got root. install su checker app from play store and confirm.
if not root using SUPER ONE CLICK ROOT.
flash recovery (4EXT is good) www.4ext.net
do a backup and then flash the rom u want
Sent from my Nexus One using Tapatalk
Thanks I'll check. I only had teh power button fixed and not by HTC so I doubt they unrooted it. I'm still in a bootloop but I can use superoneclick still, so I'll give that a try.
so what I'm trying to do is wipe my cache without wiping my data. I don't think my bootloader is unlocked. Am I screwed?I'm in a bootloop, so I can 't install anything to the phone. I probably could put a recovery image on the SD card, but if my bootloader is locked, I'm guessing that won't work. I'm rooted. When I go to HBOOT, the phone looks for passim files and doesn't find them, then when I choose recovery I get the white triangle. I've try to flash a recovery image through ADB but I get an error, failed to load image. Again, is that a bootloader issue?
I'm almost at the point of just wiping my data and hoping I can get it all back somehow.
holtonhj said:
so what I'm trying to do is wipe my cache without wiping my data. I don't think my bootloader is unlocked. Am I screwed?I'm in a bootloop, so I can 't install anything to the phone. I probably could put a recovery image on the SD card, but if my bootloader is locked, I'm guessing that won't work. I'm rooted. When I go to HBOOT, the phone looks for passim files and doesn't find them, then when I choose recovery I get the white triangle. I've try to flash a recovery image through ADB but I get an error, failed to load image. Again, is that a bootloader issue?
I'm almost at the point of just wiping my data and hoping I can get it all back somehow.
Click to expand...
Click to collapse
You really know nothing huh. The triangle is the recovery. Press power button and volume up at the same time, it will the show you some options like wipe cache.
n1newbie said:
jus to make sure that if u still got root. install su checker app from play store and confirm.
if not root using SUPER ONE CLICK ROOT.
flash recovery (4EXT is good) www.4ext.net
do a backup and then flash the rom u want
Sent from my Nexus One using Tapatalk
Click to expand...
Click to collapse
Did you miss the "stuck in boot loop" part?
sorry,
meant that the triangle is your stock recovery--
you install recovery thru fastboot not adb
i would still, if you haven't, install android sdk on pc-unlock bootloader (fastboot oem unlock) and fastboot recovery--all in wiki
i think it was mentioned--holding down pwr and tb will get you into fastboot mode--phone connected and usb debugging selected on phone
you'll just have more flexibility with flashing roms etc and getting out of trouble
Hi guys, hoping one you can help.
I recently had my unlocked/rooted HTC One replaced after it completely died on me. Almost the exact same thing as what happen to this guy http://forum.xda-developers.com/showthread.php?t=2295374
Anyway, I went to unlock/install custom recovery on my new One. Done the unlock process fine, I've always used ClockWorkMod but I decided I'd flash TWRP to try. Files were sent/written ok and everythig seemed fine. But when I try to boot into recovery it shows the "Entering Recovery" screen (with the red warning text at the bottom) for a split second, then it just reboots the phone... So I tried Flashing CWM instead, again process went as normal but still can't boot to recovery. Even flashed the stock recovery and still the same. Tried flashing CWM through Rom Manager, just gives me "An error occurred while flashing your recovery".
It's a 3uk phone and their is no RUU for it yet that I've seen, so I thought if I can get S-Off I can change CID and use a generic European RUU. This when I realised it's not rooted and as I can't get to recovery I can't root it that way. Tried using the "Perm Root" option in the All-In-One kit but that just throws errors back.
Also the TAMPERED doesn't show above UNLOCKED for me in bootloader.
Any ideas? I stumped
Thanks.
Anyone?
saibogu009 said:
Anyone?
Click to expand...
Click to collapse
Try 'fastboot erase cache'
MacHackz said:
Try 'fastboot erase cache'
Click to expand...
Click to collapse
Yeah I had done that, before and after flashing.
Funny thing is this morning after a full charge (wasn't like it was flat last night, had at least 50%) it worked fine, fired up the bootloader and the TAMPERED had appeared and now it loads the recovery perfect... :/ Just rooted it and now I'm off to S-Off and super CID.
Very strange but it's working now so I'm not complaining.
Thanks anyway guys.
Hi I have the Developer edition 64Gb and I have this problem too...
Aparently the TWRP flash went well (I tried both ways, AIl in one kit and fastbbot ways) but I cannot get into recovery.
I erased cache and reflashed again but nope.
Since this phone comes unlocked I assumed that I can just skip those steps of unlocking it (am I correct there?) and went straight into flashing recovery but it does not seem to have worked.
Anybody has a different suggestion?
Thanks,
EDIT:
Never mind, I just waited few hours and tried again and it works
???
Very noobish issue. Rooted, unlocked bootloader on Atrix HD. Set up SafeStrap as recovery. Everything checked and working. After letting SafeStrap install Cyan 10.3 and rebooting, phone entered CyanogenMod boot screen and become stuck for an hour. Realized that I forgot to reset and wipe all stock settings and cache (yes, I know that should have been obvious step). Figured I could just go into SafeStrap and make the quick fix.
Seems that I'm unable to enter my custom recovery, instead I'm lead to the familiar bricked android stock recovery. No options to access stock rom (assuming it was deleted during install or lost, etc). Tried installing a different recovery, but fastboot on PC is unable to find device. Help at this point is very much appreciated, either to do any of the following:
1. Somehow access SafeStrap again (assuming that it wasn't wiped aswell) so I can clear stock settings and cache, get Cyan 10.3 going properly.
2. Instructions/links to another method to otherwise forcibly delete stock settings and cache (please keep in mind, fastboot is currently unable to find device).
3. Otherwise completely clear phone of EVERYTHING, then reinstal stock recovery and or/stock ROM so I can give up on flashing custom and stick with stock.
*Update:
Was finally able to get phone into AP Fastboot Flahsh Mode. My computer itself can't see the phone, but device manager shows it as "Fastboot QINARA S" and I'm able get a response through my PC's end of flashboot.
Tried using RSD lite to install a stock ROM, but no success since the phone isn't off and can't be turned off without trying to go into another Boot Loop. Also tried installing a new recovery through fastboot, but I keep getting the response, "(Bootloader) variable not supported."
At this point, I'd be really happy if I could get the proper commands to wipe and factory reset my phone while in fastboot. At least then I'd have Cyan. I could try installing stock if it continued to glitch.
Update Motorola drivers on your computer and check threads for fastboot files from skeevydude.
Sent from my MB886 using XDA Premium 4 mobile app
Well safestrap is for use with locked bootloaders so there lies your problem. Maybe you can make a factory cable or buy one to put your phone into fastboot so you can flash stock through rsd.
Sent from my PACMAN MATRIX HD MAXX
http://forum.xda-developers.com/showthread.php?t=2226527
Sent from my MB886 using XDA Premium 4 mobile app
SkunkID said:
*Update:
Was finally able to get phone into AP Fastboot Flahsh Mode. My computer itself can't see the phone, but device manager shows it as "Fastboot QINARA S" and I'm able get a response through my PC's end of flashboot.
Tried using RSD lite to install a stock ROM, but no success since the phone isn't off and can't be turned off without trying to go into another Boot Loop. Also tried installing a new recovery through fastboot, but I keep getting the response, "(Bootloader) variable not supported."
At this point, I'd be really happy if I could get the proper commands to wipe and factory reset my phone while in fastboot. At least then I'd have Cyan. I could try installing stock if it continued to glitch.
Click to expand...
Click to collapse
The error is from using the wrong fastboot executable. Look at post 5. If you get a stickybit error, search our general forums for "stickybit" and you'll find that fix.
deeje00 said:
Well safestrap is for use with locked bootloaders so there lies your problem. Maybe you can make a factory cable or buy one to put your phone into fastboot so you can flash stock through rsd.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
With a bit of creativitity one could use SSR to dual boot Holo Blur and Batakang....or two custom 4.3's that use the same kernel....PAC + Carbon both with arrrghhh's kernel.....Only problem is ya can't be a noob at all if ya do it.
Solved issue...somehow.
Used method shown in link below to install stock recovery image since Safety Strap was apparently deleted/wiped/banished?
(can't link, still noob poster. Just search, "[Guide] How to flash back to Stock Rom - chacha. Please Sticky This !", should be the first result.)
After installing stock recovery, was able to go to the standard dead android screen, but after punching the volume buttons randomly, the option menu for stock recovery opened. Was able to factory reset and wipe cache, then properly reboot. Cyanogenmod finally got out of it's BootLoop, and everything seems to be running fine. Flashed a non-official CWM (no offical CWM or Twrp avaliable for Atric HD) and got Gapps. Phone is finally running fine.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Lingering issues worth mentioning incase there are obvious fixes.
.Cyan likes to crash whenever running programs for the first time or doing do much activity in a short amount of time (I suspect the cache has something to do with the cleared cache since revisiting apps doesn't cause crashes as often). If it persists, I'll probably just back up and look for a more stable rom.
.All notification lights are white, except the battery notification lights, despite me changing the colors and/or allowing apps to use their own light settings.
When you're at the "dead Android" screen pressing Vol Down + Power pushes it into recovery, iirc - might seem random but there's a purpose behind it.
SkunkID said:
Solved issue...somehow.
Used method shown in link below to install stock recovery image since Safety Strap was apparently deleted/wiped/banished?
(can't link, still noob poster. Just search, "[Guide] How to flash back to Stock Rom - chacha. Please Sticky This !", should be the first result.)
After installing stock recovery, was able to go to the standard dead android screen, but after punching the volume buttons randomly, the option menu for stock recovery opened. Was able to factory reset and wipe cache, then properly reboot. Cyanogenmod finally got out of it's BootLoop, and everything seems to be running fine. Flashed a non-official CWM (no offical CWM or Twrp avaliable for Atric HD) and got Gapps. Phone is finally running fine.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Lingering issues worth mentioning incase there are obvious fixes.
.Cyan likes to crash whenever running programs for the first time or doing do much activity in a short amount of time (I suspect the cache has something to do with the cleared cache since revisiting apps doesn't cause crashes as often). If it persists, I'll probably just back up and look for a more stable rom.
.All notification lights are white, except the battery notification lights, despite me changing the colors and/or allowing apps to use their own light settings.
Click to expand...
Click to collapse
Hi, I am having the same issue you had... how the heck were you able to get back into stock recovery? Every time I try my phone just reboots and gets stuck again. I cant even turn off my phone with out it rebooting. I have read your posts and followed that other forum you mentioned but if I cannot boot into recovery and if my computer cant see my phone it wont work. Please help when you get a chance.
As I said, the phone is not currently bricked. I can do a normal boot into the OS and Download Mode, however recovery is a different story.
I believe the issue stems from the latest OTA update to version VS98026A. I had a custom ROM on here before, but the developer stopped support so I went back to stock doing a complete wipe through TWRP, including both caches, system, data, and internal storage. I then flashed the stock Verizon ROM for version 24A, rooted, temp unrooted to take the OTA for VoLTE, restored root, and installed TWRP. I have been unable to boot into recovery AT ALL. I have tried through the TWRP manager app and ADB. Both times I was simply presented with a fastboot screen stating processing commands eternally, I let it sit there for a good 10 minutes to be sure. I also tried different versions of TWRP, but they all either failed entirely and just rebooted normally or gave me fastboot.
I have access to ADB terminal on my PC, the TWRP manager app, fastboot (I know, not ideal), and download mode. I can flash most parts of the system through ADB, with a little help. I have the basics down.
I've got backups of everything from when I had TWRP on here before, even my EFS. Any suggestions, no matter how drastic, are welcome.
UPDATE: I've used fastboot to replace my boot, aboot, laf, and recovery partitions. Now when I enter recovery, I'm presented with the android with the red exclamation triangle, but no recovery options.
Just to try it I put TWRP back on and I still get fastboot.
Starcruiser322 said:
As I said, the phone is not currently bricked. I can do a normal boot into the OS and Download Mode, however recovery is a different story.
I believe the issue stems from the latest OTA update to version VS98026A. I had a custom ROM on here before, but the developer stopped support so I went back to stock doing a complete wipe through TWRP, including both caches, system, data, and internal storage. I then flashed the stock Verizon ROM for version 24A, rooted, temp unrooted to take the OTA for VoLTE, restored root, and installed TWRP. I have been unable to boot into recovery AT ALL. I have tried through the TWRP manager app and ADB. Both times I was simply presented with a fastboot screen stating processing commands eternally, I let it sit there for a good 10 minutes to be sure. I also tried different versions of TWRP, but they all either failed entirely and just rebooted normally or gave me fastboot.
I have access to ADB terminal on my PC, the TWRP manager app, fastboot (I know, not ideal), and download mode. I can flash most parts of the system through ADB, with a little help. I have the basics down.
I've got backups of everything from when I had TWRP on here before, even my EFS. Any suggestions, no matter how drastic, are welcome.
UPDATE: I've used fastboot to replace my boot, aboot, laf, and recovery partitions. Now when I enter recovery, I'm presented with the android with the red exclamation triangle, but no recovery options.
Just to try it I put TWRP back on and I still get fastboot.
Click to expand...
Click to collapse
Was there ever a resolution to this?
I believe I might be having the same issue.
Sent from my LG-VS980
Well, it was sort of resolved for me. If you follow the steps in THIS THREAD, you better hope you have enough battery to last through the process. If you do, great, you'll have your phone back in running order soon enough. A bit of Linux experience helps with this.
After my battery died it refused to come back on, and I brought it to the Verizon store and told them I woke up one day and it wouldn't turn on.
They replaced it under warranty.
I assume other major carriers would do the same.
Is your phone still under warranty? What model and carrier?
After a bit of searching, I did confirm that the 26A update locks the bootloader and implements tighter security policies.
Q&A for [RECOVERY] TWP 2.7.1.0 for One Mini 2
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY] TWP 2.7.1.0 for One Mini 2. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
new twrp's won't work
Hi there,
I just tried to root my htc mini 2 with and it says that it is tampered now and I can't reboot my recovery. So I tried the newest twrp and some in between because I've read in this forum that somebody had the same problem and he just got the newest twrp but that didn't work for me at all.
Is there any way to undo the whole thing by replacing the twrp with the original one or do I have to wait till there is gonna be a root for the htc mini 2?
When I try to recover everything it says that this build is for development purpose only...
Does somebody have an idea?
I would appreciate it a lot if somebody has an idea.
Hornochse7958 said:
Hi there,
I just tried to root my htc mini 2 with and it says that it is tampered now and I can't reboot my recovery. So I tried the newest twrp and some in between because I've read in this forum that somebody had the same problem and he just got the newest twrp but that didn't work for me at all.
Is there any way to undo the whole thing by replacing the twrp with the original one or do I have to wait till there is gonna be a root for the htc mini 2?
When I try to recover everything it says that this build is for development purpose only...
Does somebody have an idea?
I would appreciate it a lot if somebody has an idea.
Click to expand...
Click to collapse
When the bootloader says "tempered" means that it was unlocked. when you see " this build is for development purpose only" its referring to TWRP because you now using a custom recovery. Not sure the nature of your problem but to undo, simply boot into boot loader and flash original recovery.img you can find in the forum.
I can't you open TWRP?
kativiti said:
When the bootloader says "tempered" means that it was unlocked. when you see " this build is for development purpose only" its referring to TWRP because you now using a custom recovery. Not sure the nature of your problem but to undo, simply boot into boot loader and flash original recovery.img you can find in the forum.
I can't you open TWRP?
Click to expand...
Click to collapse
Thank you for the quick respond and I wanted to try and undo everything but no my problem is that my phone completely froze in the twrp screen. I can't do anything, I can't unlock it nor shut down my phone or start the bootloader... that kind of sucks. Any suggestions now? Is it possible to open the htc one mini 2 and take out the battery? or do I have to wait till it runs out by it self and than start it again?
Hornochse7958 said:
Thank you for the quick respond and I wanted to try and undo everything but no my problem is that my phone completely froze in the twrp screen. I can't do anything, I can't unlock it nor shut down my phone or start the bootloader... that kind of sucks. Any suggestions now? Is it possible to open the htc one mini 2 and take out the battery? or do I have to wait till it runs out by it self and than start it again?
Click to expand...
Click to collapse
Read this tread. Someone had the same problem
http://forum.xda-developers.com/one-mini-2/help/rooting-htc-one-mini-2-t2880936
Unresponsive after boot up from dead battery
THanks to U-ra I get the enjoy my fav DSP Viper!!!
Cheers Man,
I have a small niggling problem that I can't work out, My battery tends to die alot, once I place the phone on charge after a flat battery, the phone auto boots to Twp, I am really cool with that but the annoying thing is buttons and screen are unresponsive? I can't do a thing, just have the Twp menu. The power of button does turn the screen off/on but thats its. Tried doing factory resets, reboots holding down power, vol buttons. Just nothing.
only way around it is to use adb and reboot command.
Is anyone else experiencing this problem.
http://forum.xda-developers.com/one...recovery-twp-2-7-1-0-one-mini-2-t2801370/page 4 here's the answer, so far
@u-ra is there any clue about getting official twrp support? (I was thinking about that problem of the self-booting recovery when phone is off and plugged in)
gibihr said:
@u-ra is there any clue about getting official twrp support? (I was thinking about that problem of the self-booting recovery when phone is off and plugged in)
Click to expand...
Click to collapse
I'll try to get to it this weekend.
HELP TWRP stuck at swipe to unlock
Hello all,
for unknown reason the phone restarded and now is stuck at swipe to unlock but it is not working. I try to hold power+volume down, but no way to turn it off. What can I do?
Thanks in advance
PS: well, it restarted... I don't know what happend but now it's ok
sorry for sounding like a newb
i have the verizon htc one remix, which i believe is the same as the one mini 2 . will this work on it?
akubenz said:
i have the verizon htc one remix, which i believe is the same as the one mini 2 . will this work on it?
Click to expand...
Click to collapse
you can try but i think someone here couldn't unlock bootloader trough HTC Dev.
Help: Stock rom updated between boots, TWRP non responsive, fastboot doesnt recognise
Hello to anyone that can help or in a similar situation,
Have brand new HTC one mini 2, rooted. Am trying to install cyanogenmod and followed the instructions on their page. All went well and was ready to flash the rom from TWRP. Decided to do a backup to SD first and then apply super user. Forced to reboot and accidentally let it boot to android (stock rom). Didnt notice the last time i had it booted wifi downloaded a system update which was automatically applied next time i booted into the stock rom after backup and Superuser in TWRP. Rebooted to recovery (TWRP) as soon as i could, but TWRP is no longer responding to touch. I realise i have probably updated the phone to a point where TWRP is no longer working, and i have to use something else to flash my rom. Am trying to flash an updated TWRP or Clockworkmod recovery, but fastboot/adb no longer recognise the device when booted into the stock rom, and when i boot into TWRP (non-responsive) it also doesnt recognise the device attached, even if i catch it before the screen goes black from inactivity. Any suggestions greatly appreciated....
snorglamp said:
Hello to anyone that can help or in a similar situation,
Have brand new HTC one mini 2, rooted. Am trying to install cyanogenmod and followed the instructions on their page. All went well and was ready to flash the rom from TWRP. Decided to do a backup to SD first and then apply super user. Forced to reboot and accidentally let it boot to android (stock rom). Didnt notice the last time i had it booted wifi downloaded a system update which was automatically applied next time i booted into the stock rom after backup and Superuser in TWRP. Rebooted to recovery (TWRP) as soon as i could, but TWRP is no longer responding to touch. I realise i have probably updated the phone to a point where TWRP is no longer working, and i have to use something else to flash my rom. Am trying to flash an updated TWRP or Clockworkmod recovery, but fastboot/adb no longer recognise the device when booted into the stock rom, and when i boot into TWRP (non-responsive) it also doesnt recognise the device attached, even if i catch it before the screen goes black from inactivity. Any suggestions greatly appreciated....
Click to expand...
Click to collapse
A kind member replied to me in another post indicating that fastboot commands only work in the bootloader, and that adb commands only work in TWRP which is why I am having problems re-flashing TWRP (requiring the "fastboot flash recovery TWRP.img" command). However I thought TWRP replaced the bootloader, so I seem to be locked out of re-flashing TWRP because i have TWRP. This seems not to make a lot of sense, can anyone else confirm or otherwise explain what I have misunderstood about that? As stated neither adb nor fastboot recognises the device is attached to the computer any more, so commands are not executing...
snorglamp said:
Hello to anyone that can help or in a similar situation,
Have brand new HTC one mini 2, rooted. Am trying to install cyanogenmod and followed the instructions on their page. All went well and was ready to flash the rom from TWRP. Decided to do a backup to SD first and then apply super user. Forced to reboot and accidentally let it boot to android (stock rom). Didnt notice the last time i had it booted wifi downloaded a system update which was automatically applied next time i booted into the stock rom after backup and Superuser in TWRP. Rebooted to recovery (TWRP) as soon as i could, but TWRP is no longer responding to touch. I realise i have probably updated the phone to a point where TWRP is no longer working, and i have to use something else to flash my rom. Am trying to flash an updated TWRP or Clockworkmod recovery, but fastboot/adb no longer recognise the device when booted into the stock rom, and when i boot into TWRP (non-responsive) it also doesnt recognise the device attached, even if i catch it before the screen goes black from inactivity. Any suggestions greatly appreciated....
Click to expand...
Click to collapse
I think I have found the solution for myself: I went back into the stock rom and did a factory reset (from within android booted up as normal), which after completion rebooted me into TWRP which now works fine (is responding to touch again, and i can flash the Cyanogen image now). Hopefully this helps someone else in this situation one day, or maybe I am the only idiot that needed to ask hehe. I should clarify that after flashing TWRP I lost access to the fastboot screen and could not push anything over ADB or fastboot commands from windows (plugged in via USB). Holding down volume down and power booted directly into TWRP, and i had no way to get to fastboot screen. After doing factory resent from within the Android OS, holding volume down and power booted me to the fastboot screen, and only when I selected "Recovery" did it take me to TWRP, and I was again able to run fastboot and ADB commands from PC. Weird (or maybe not if you know more than me), but there it is...
snorglamp said:
A kind member replied to me in another post indicating that fastboot commands only work in the bootloader, and that adb commands only work in TWRP which is why I am having problems re-flashing TWRP (requiring the "fastboot flash recovery TWRP.img" command). However I thought TWRP replaced the bootloader, so I seem to be locked out of re-flashing TWRP because i have TWRP. This seems not to make a lot of sense, can anyone else confirm or otherwise explain what I have misunderstood about that? As stated neither adb nor fastboot recognises the device is attached to the computer any more, so commands are not executing...
Click to expand...
Click to collapse
Sorry, but it seems to me that you don't know the difference between bootloader and recovery. I apologize if you do. If not, search in CM wikis or ask here for explanations.
corbeau56 said:
Sorry, but it seems to me that you don't know the difference between bootloader and recovery. I apologize if you do. If not, search in CM wikis or ask here for explanations.
Click to expand...
Click to collapse
I do indeed know the difference between the bootloader and recovery, its just that the bootloader (Hboot) was not longer accessible in my situation and TWRP (the recovery) was imposing itself when you would normally expect to find the bootloader (i.e. my bootloader was for all intents and purposes replaced by my recovery, while I am sure this is not true in fact, it was in effect). As I say, doing a factory reset from within the OS restored the bootloader (HBoot) and I was able to continue modding. I am today extremely happy with my fully secured cyanogenmodded HTC One Mini 2 via TWRP recovery method. I hope that is somewhat clearer.
Can you enter bootliader now? I got stuck in a bootloop once and couldn't enter bootloader because I continued pressing power and Volume down like I did on my One S. For Mini 2, we have to hold the Volume UP and Power buttons until HBOOT appears, then release the buttons.
corbeau56 said:
Can you enter bootliader now? I got stuck in a bootloop once and couldn't enter bootloader because I continued pressing power and Volume down like I did on my One S. For Mini 2, we have to hold the Volume UP and Power buttons until HBOOT appears, then release the buttons.
Click to expand...
Click to collapse
That may well have been an alternative solution to my problem, however it was fixed by the factory reset and volume down and power then took me to HBoot (this would appear to contradict what you have said above, but maybe volume down and power does different things depending on how what you have done to the phone, not sure), so I cannot confirm whether or not that also would have worked for me. Good suggestion though, especially if you are not in a position to do a factory reset. and it would certainly be easier if it worked...I am convinced my problem was the result of a conflict between the TWRP version i installed (downloaded from here) and the android update that occurred between boots.
I am indeed able to get into bootloader/hboot and successfully flashed cyanogenmod from TWRP. I can confirm post flashing TWRP and Cyanogenmod, holding volume down and power takes me to HBoot (and then the option to go to fastboot or recovery).
Holding power up and power just loads cyanogenmod for me now as if I had just pressed power.
I thought I should confirm whether or not holding volume up vs volume down with power results in bootloader vs recovery loading. For me, they both took me to TWRP.
Also, TWRP doesnt seem to work on HTC One Mini 2 after you do anything to set up your phone. It just doesnt recognise touch input any more so you cant do anything with it. However the fix i noted earlier (factory reset) even works with other roms installed, confirmed for cyanogenmod 11 and 12 nightlies as at the date of this post. After factory reset TWRP works again, but if you go through the setup steps and start installing apps, TWRP goes unresponsive again. I hope we might get an official TWRP update soon!