Database Develop

[Q] Nexus One stuck at X/ No recovery

First of all, I have checked around quite a bit on this forum as well as others to try and avoid having to ask a question that's already been answered. Here's my problem/ what happened. I was rooted (one-click with locked bootloader) and had tried out several roms for a couple of months now. A few days ago I reverted back to an old stock 2.2 backup. My phone received two ota updates and I'm pretty sure I lost root. I had just went on using the phone for about two days when I ran into a problem today. After shutting the phone off I have now become "stuck" at the initial "X" screen (not animated). I pulled the battery and tried again several times. I then tried to reboot into recovery from the bootloader/ 3 skateboards screen with no luck. Any time I hit recovery it simply takes me back to my stuck "X" screen. I have an entire backup of my SD card from earlier as well as at least 4 nandroid backups (one of which was the stock 2.2 before the latest ota). I am thinking I need to somehow put clockwork recovery back on my phone so I can restore to one of my backups. I do not know how to do this. Sorry for the lengthy post but I want to provide as much information as possible. Any help at all would be greatly appreciated.

Just like you restore to stock 2.2. You should have used recovery.img. use adb fastboot to put the stock or anom recovery. I am not am expert but I have had the same problem few times. Always use adb commands
Sent from my Nexus One using Tapatalk

Does my n1 have to be in usb debugging mode because it's acting like it's not connected or something. I get the message "error: device not found." I'm on the fastboot screen on my n1 and using terminal on a mac. I usually didn't leave debugging mode on

No it doesn't but you have to have the drivers installed as well as the SDK with dependencies.

Whew! Thank God! I ended up getting a FRG33 stock rom onto the sd card and the bootloader detected it. I'm not sure what happened but when I tried recovery after that it took me to the android with an "!" point (meaning no recovery?) and then back to the X. This time however it loaded on through and went right back to the way it was before it was stuck. Again, not sure what happened but thanks for the replies and help.

fastbook oem unlock
install Amon RA recovery
flash new rom.

Caseyp789 said:
Whew! Thank God! I ended up getting a FRG33 stock rom onto the sd card and the bootloader detected it. I'm not sure what happened but when I tried recovery after that it took me to the android with an "!" point (meaning no recovery?) and then back to the X. This time however it loaded on through and went right back to the way it was before it was stuck. Again, not sure what happened but thanks for the replies and help.
Click to expand...
Click to collapse
The exclamation mark is just the stock Android recovery - it was re-installed when you loaded the stock FRG33 ROM.
Performing OTA updates requires you to have the stock recovery installed. Simply reverting to a stock 2.2 nandroid isn't sufficient, so trying to install those OTAs (which should have failed without stock recovery) may have broken something there.
GldRush98 said:
fastbook oem unlock
install Amon RA recovery
flash new rom.
Click to expand...
Click to collapse
This is by far the easiest (and safest) way. Google/HTC provided us an easy and safe method for gaining full access to our phones.... Why so many people refuse to use it is beyond me. If you root it the proper way (with fastboot oem unlock), it will make recovery from any further issues a lot more simple.

From what I can tell, I am having the same symptoms as the topic creator. I believe the problems started during a failed flash of cyanogenmod 6, but I am not sure by what means the flashing took place.
I can't boot the phone normally, it hangs on the X splash screen and the same occurs when trying to enter recovery mode.
I have tried the passimg approach to fix this, it either doesn't recognize my zip or starts loading it and freezes on a loading bar.
Fastboot flashing recovery completes, but doesn't fix the issue.
I can fastboot flash every image partition except system or radio, both hang.
As danger rat and dude random both know, I have posted this problem on the nexus one forums but I thought I'd post here to have some more minds look at it.

Solved - Locked Boot Screen, Unable To Access Custom Recovery Image.

Very noobish issue. Rooted, unlocked bootloader on Atrix HD. Set up SafeStrap as recovery. Everything checked and working. After letting SafeStrap install Cyan 10.3 and rebooting, phone entered CyanogenMod boot screen and become stuck for an hour. Realized that I forgot to reset and wipe all stock settings and cache (yes, I know that should have been obvious step). Figured I could just go into SafeStrap and make the quick fix.
Seems that I'm unable to enter my custom recovery, instead I'm lead to the familiar bricked android stock recovery. No options to access stock rom (assuming it was deleted during install or lost, etc). Tried installing a different recovery, but fastboot on PC is unable to find device. Help at this point is very much appreciated, either to do any of the following:
1. Somehow access SafeStrap again (assuming that it wasn't wiped aswell) so I can clear stock settings and cache, get Cyan 10.3 going properly.
2. Instructions/links to another method to otherwise forcibly delete stock settings and cache (please keep in mind, fastboot is currently unable to find device).
3. Otherwise completely clear phone of EVERYTHING, then reinstal stock recovery and or/stock ROM so I can give up on flashing custom and stick with stock.

*Update:
Was finally able to get phone into AP Fastboot Flahsh Mode. My computer itself can't see the phone, but device manager shows it as "Fastboot QINARA S" and I'm able get a response through my PC's end of flashboot.
Tried using RSD lite to install a stock ROM, but no success since the phone isn't off and can't be turned off without trying to go into another Boot Loop. Also tried installing a new recovery through fastboot, but I keep getting the response, "(Bootloader) variable not supported."
At this point, I'd be really happy if I could get the proper commands to wipe and factory reset my phone while in fastboot. At least then I'd have Cyan. I could try installing stock if it continued to glitch.

Update Motorola drivers on your computer and check threads for fastboot files from skeevydude.
Sent from my MB886 using XDA Premium 4 mobile app

Well safestrap is for use with locked bootloaders so there lies your problem. Maybe you can make a factory cable or buy one to put your phone into fastboot so you can flash stock through rsd.
Sent from my PACMAN MATRIX HD MAXX

http://forum.xda-developers.com/showthread.php?t=2226527
Sent from my MB886 using XDA Premium 4 mobile app

SkunkID said:
*Update:
Was finally able to get phone into AP Fastboot Flahsh Mode. My computer itself can't see the phone, but device manager shows it as "Fastboot QINARA S" and I'm able get a response through my PC's end of flashboot.
Tried using RSD lite to install a stock ROM, but no success since the phone isn't off and can't be turned off without trying to go into another Boot Loop. Also tried installing a new recovery through fastboot, but I keep getting the response, "(Bootloader) variable not supported."
At this point, I'd be really happy if I could get the proper commands to wipe and factory reset my phone while in fastboot. At least then I'd have Cyan. I could try installing stock if it continued to glitch.
Click to expand...
Click to collapse
The error is from using the wrong fastboot executable. Look at post 5. If you get a stickybit error, search our general forums for "stickybit" and you'll find that fix.
deeje00 said:
Well safestrap is for use with locked bootloaders so there lies your problem. Maybe you can make a factory cable or buy one to put your phone into fastboot so you can flash stock through rsd.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
With a bit of creativitity one could use SSR to dual boot Holo Blur and Batakang....or two custom 4.3's that use the same kernel....PAC + Carbon both with arrrghhh's kernel.....Only problem is ya can't be a noob at all if ya do it.

Solved issue...somehow.
Used method shown in link below to install stock recovery image since Safety Strap was apparently deleted/wiped/banished?
(can't link, still noob poster. Just search, "[Guide] How to flash back to Stock Rom - chacha. Please Sticky This !", should be the first result.)
After installing stock recovery, was able to go to the standard dead android screen, but after punching the volume buttons randomly, the option menu for stock recovery opened. Was able to factory reset and wipe cache, then properly reboot. Cyanogenmod finally got out of it's BootLoop, and everything seems to be running fine. Flashed a non-official CWM (no offical CWM or Twrp avaliable for Atric HD) and got Gapps. Phone is finally running fine.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Lingering issues worth mentioning incase there are obvious fixes.
.Cyan likes to crash whenever running programs for the first time or doing do much activity in a short amount of time (I suspect the cache has something to do with the cleared cache since revisiting apps doesn't cause crashes as often). If it persists, I'll probably just back up and look for a more stable rom.
.All notification lights are white, except the battery notification lights, despite me changing the colors and/or allowing apps to use their own light settings.

When you're at the "dead Android" screen pressing Vol Down + Power pushes it into recovery, iirc - might seem random but there's a purpose behind it.

SkunkID said:
Solved issue...somehow.
Used method shown in link below to install stock recovery image since Safety Strap was apparently deleted/wiped/banished?
(can't link, still noob poster. Just search, "[Guide] How to flash back to Stock Rom - chacha. Please Sticky This !", should be the first result.)
After installing stock recovery, was able to go to the standard dead android screen, but after punching the volume buttons randomly, the option menu for stock recovery opened. Was able to factory reset and wipe cache, then properly reboot. Cyanogenmod finally got out of it's BootLoop, and everything seems to be running fine. Flashed a non-official CWM (no offical CWM or Twrp avaliable for Atric HD) and got Gapps. Phone is finally running fine.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Lingering issues worth mentioning incase there are obvious fixes.
.Cyan likes to crash whenever running programs for the first time or doing do much activity in a short amount of time (I suspect the cache has something to do with the cleared cache since revisiting apps doesn't cause crashes as often). If it persists, I'll probably just back up and look for a more stable rom.
.All notification lights are white, except the battery notification lights, despite me changing the colors and/or allowing apps to use their own light settings.
Click to expand...
Click to collapse
Hi, I am having the same issue you had... how the heck were you able to get back into stock recovery? Every time I try my phone just reboots and gets stuck again. I cant even turn off my phone with out it rebooting. I have read your posts and followed that other forum you mentioned but if I cannot boot into recovery and if my computer cant see my phone it wont work. Please help when you get a chance.

[Asus Zenfone Go ZC500TG] Hard bricked or?..

Hello XDA,
I'm not sure if this is the right spot to ask about this, lemme know if it is.
Right, time to get to the problem I'm facing.
I've got an Asus ZC500TG in this year's August, rooted it the same month, and everything was working fine until last night.
After doing a basic procedure of using TWRP 2.8.7.0 to flash Infinix Hot 2 AOSP port(was working for me many times), the device decided to just boot into recovery even though i pick 'boot to system'.
The bad news don't stop there either. When I plug my phone with USB while it's powered off, instead of going into the ROM part that shows the battery symbol and charges... it goes back into recovery instead?
Also, doing the keystroke(holding power+volume up), instead of going into bootloader mode(the thing that lets you pick between recovery, fastboot and normal boot), it also boots to recovery instead.
If i boot to fastboot through TWRP, it boots into fastboot fine, but that's pretty much it. Fastboot and recovery modes is the only thing I can access.
Even though I was with the rooting community ever since I've had my first smartphone in 2012, I've never experienced such an issue where the only thing bootable is either Recovery or Fastboot using the said recovery.
Here's what I've tried so far:
-Wiping cache/dalvik cache/system/data;
-flashing a known working stock ROM;
-Trying to sideload it using TWRP's ADB sideload, seemed to check out and came back to same issue;
-Trying to flash/sideload custom ROMs I know should function properly, same issue occured;
-Flashing stock recovery back and attempt to flash stock ROM, also failed;
-tried to wipe /system, /data, /cache and /dalvik-cache using fastboot, then flashing ROM using recovery, also failed;
-looking up anything that's related to it, mostly fraud websites and/or Russian websites suggesting to do what I did already.
Has anyone ever encountered this, and is there a possible fix to this?
Thanks in advance to all your answers.
-MrRubikon

Help me zenfone go zc500tg zoovd my phone is wrong root then total dead can not live

antho111 said:
Help me zenfone go zc500tg zoovd my phone is wrong root then total dead can not live
Click to expand...
Click to collapse
I have some problem,,
,,somebody can give solution pleace,,!?

Nokia 8 hangs on boot

Hey there so, I've recently been trying to root my new Nokia 8. I have successfully unlocked the bootloader via downgrade to Android 8.1, and running HMD's app. I then have updated to 9 via OTA, and flashed TWRP to boot_b (the current active slot). Next i flashed Magisk 18.1 from the official thread here on XDA, using TWRP. Upon reboot, the phone now hangs and does not respond to any input. My only option is to let it go flat. Attempting to charge it afterwards, results in the red battery plug in icon, which does come up if i press any buttons. After it charges enough, it attempts to boot (kind of?) on its own, and just freezes, and i'm back to square one. This is a brand new phone so this would suck so bad if i can't fix it..
Thanks for any help guys

t0r3n0 said:
Hey there so, I've recently been trying to root my new Nokia 8. I have successfully unlocked the bootloader via downgrade to Android 8.1, and running HMD's app. I then have updated to 9 via OTA, and flashed TWRP to boot_b (the current active slot). Next i flashed Magisk 18.1 from the official thread here on XDA, using TWRP. Upon reboot, the phone now hangs and does not respond to any input. My only option is to let it go flat. Attempting to charge it afterwards, results in the red battery plug in icon, which does come up if i press any buttons. After it charges enough, it attempts to boot (kind of?) on its own, and just freezes, and i'm back to square one. This is a brand new phone so this would suck so bad if i can't fix it..
Thanks for any help guys
Click to expand...
Click to collapse
Which version of twrp did you flash ? Where did you get it from?
Flash the stock recovery of your pie version using the right file from here http://bit.ly/nokia-nb1 and then do a factory reset or sideload the pie rom.
Once that is done use the same link to flash the corresponding patched twrp boot img, boot into recovery and then flash magisk from inside twrp

MDV106 said:
Which version of twrp did you flash ? Where did you get it from?
Flash the stock recovery of your pie version using the right file from here bit.ly/nokia-nb1 and then do a factory reset or sideload the pie rom.
Once that is done use the same link to flash the corresponding patched twrp boot img, boot into recovery and then flash magisk from inside twrp
Click to expand...
Click to collapse
I got the TWRP version from the folder from that link actually.
I've managed to get the phone to boot somehow. The phone would expose fastboot for a few seconds after having just enough battery from getting a bit of charge after letting it go flat, before freezing when presumably trying to load the OS. So i managed to send 'fastboot reboot recovery' to it after letting it go flat once again, and successfully entered TWRP, and factory reset. Now my phone boots into Android, TWRP still flashed, and bootloader unlocked, but no root. What would the safest option to install magisk? Wouldn't want to brick the phone again...

t0r3n0 said:
I got the TWRP version from the folder from that link actually.
I've managed to get the phone to boot somehow. The phone would expose fastboot for a few seconds after having just enough battery from getting a bit of charge after letting it go flat, before freezing when presumably trying to load the OS. So i managed to send 'fastboot reboot recovery' to it after letting it go flat once again, and successfully entered TWRP, and factory reset. Now my phone boots into Android, TWRP still flashed, and bootloader unlocked, but no root. What would the safest option to install magisk? Wouldn't want to brick the phone again...
Click to expand...
Click to collapse
you can install it using Magisk Manager apk, or flash the Magisk zip file inside TWRP, your choice. I dont think either of the two menthods are risky

t0r3n0 said:
Hey there so, I've recently been trying to root my new Nokia 8. I have successfully unlocked the bootloader via downgrade to Android 8.1, and running HMD's app. I then have updated to 9 via OTA, and flashed TWRP to boot_b (the current active slot). Next i flashed Magisk 18.1 from the official thread here on XDA, using TWRP. Upon reboot, the phone now hangs and does not respond to any input. My only option is to let it go flat. Attempting to charge it afterwards, results in the red battery plug in icon, which does come up if i press any buttons. After it charges enough, it attempts to boot (kind of?) on its own, and just freezes, and i'm back to square one. This is a brand new phone so this would suck so bad if i can't fix it..
Thanks for any help guys
Click to expand...
Click to collapse
I currently have a similar problem. successfully installed twrp and booted into recovery to see if it works. It did. so now i got the magisk install zip and wanted to install it via twrp, but after executing adb reboot recovery my phone now is stuck on the bootloader unlocked warning screen. The phone doesnt react to any input and doesnt connect to adb or fastboot. currently waiting for the battery to die and try with a fresh reboot after that...

shadow87qft said:
I currently have a similar problem. successfully installed twrp and booted into recovery to see if it works. It did. so now i got the magisk install zip and wanted to install it via twrp, but after executing adb reboot recovery my phone now is stuck on the bootloader unlocked warning screen. The phone doesnt react to any input and doesnt connect to adb or fastboot. currently waiting for the battery to die and try with a fresh reboot after that...
Click to expand...
Click to collapse
For me, i found that fastboot was being exposed for a few seconds when it would start to turn back on after the battery dying out. I was able to send 'fastboot reboot recovery' and it didn't boot into recovery, but it booted into Android... A bit strange.

Issue returning N6 to stock - I've done it all

Trying to give the mother in law my old N6. It was rooted / bootloader unlocked. First attempt was to factory reset from within the OS. That worked fine, until I rebooted... it wouldn't boot.
I then downloaded the Shamu factory images from Google's website (shamu-n6f27m-factory-bf5cce08) and ran the flash-all.bat script. Multiple errors showed up during the script... but I chalked it up to ADB looking for boot slots etc, whereas this one has none.
Phone booted fine. Installed apps, set up the phone, power cycled it and promptly entered a bootloop.
Ran flash.all again, phone booted fine. Flashed TWRP, booted into recovery, checked things out in there (didn't do anything but flash the TWRP) tried to reboot, phone bootloops.
Flashed TWRP, booted into Recovery, tried to erase system, etc.... multiple errors again. Booted into bootloader, ran Flash-all... phone boots. Installed some apps, rebooted phone and bootloop again.
Then I did something REALLY stupid, I locked the bootloader from ADB. Now I'm on the bootloader, but can't OEM unlock because it's asking me to boot into the OS and enable the ability from Developer options.
I've no idea why this phone is doing this - booting fine into the OS once and then getting into a bootloop every time thereafter.
If anyone can shed some light on this, I'd appreciate it. Also, how in the hell do I unlock the bootloader now that I've locked it and I can't boot into the OS or run the Flash-all.bat anymore since it's locked?

Is your recovery stock? If it is, sideload the last OTA from Google and that should get you back into Android so you can toggle the OEM Unlock button.

Thanks. I was getting the "no command" on Stock recovery. Finally fixed this freaking issue after multiple flashes and wipes and everything else I could think of. Finally got it sorted.

usafle said:
Thanks. I was getting the "no command" on Stock recovery. Finally fixed this freaking issue after multiple flashes and wipes and everything else I could think of. Finally got it sorted.
Click to expand...
Click to collapse
So did you finally figure out what it could have been that you were doing wrong?

Strephon Alkhalikoi said:
So did you finally figure out what it could have been that you were doing wrong?
Click to expand...
Click to collapse
No. I could only assume I had messed something up when I was using it back in the day and really hosed something up. System wouldn't wipe, cache wouldn't wipe, userdata wouldn't wipe in "fasboot" just kept getting "unable to find XXXX".
So multiple flashes into TWRP and bootloops trying to really REALLY wipe the device finally fixed it. I just kept erasing / wiping every partition I could find in Stock Recovery, TWRP, and with fastboot commands. Finally I got them all wiped/cleared and was able to flash the stock OS back on and have it 'stick'.