[Q] Bricked? S/W upgrading please wait..... - LG Optimus 2x

I gave my phone to my son, cause i got a new one. he decided to put it back on stock firmware and now its saying: S/W upgrading please wait while upgrading.
I was running on TonyP JB without problems. Idid a recovery to ics with the ICS-cwm-6.0.2.5. This was also running fine.
My son tried to update to stock firmware with the official lg update tool and emergency repair. Now its stuck on the updating screen.
I tried to reinstall the new bootloader --> succeeded
Install the recovery (ICS-cwm-6.0.2.5) --> succeeded
above 2 things were done with the AIO toolkit v5
When i put the device on the same message appears?
Anyone a solution?
Thanks in advance

mavds72 said:
............
I tried to reinstall the new bootloader --> succeeded
Install the recovery (ICS-cwm-6.0.2.5) --> succeeded
above 2 things were done with the AIO toolkit v5
When i put the device on the same message appears?
Anyone a solution?
Thanks in advance
Click to expand...
Click to collapse
May be a silly question, but did you flash a ROM after finally doing the above that I quoted

owais40 said:
May be a silly question, but did you flash a ROM after finally doing the above that I quoted
Click to expand...
Click to collapse
Yes, i tried flashing a rom. Without result, keeps saying the s/w upgrade, please wait while upgrading.
Also tried smartflashing with v30a, no result.
I can install the new bootloader an the ics partitition size.
I also tried a full restore ROM and Data (Kernel, System, Data), no result

mavds72 said:
Yes, i tried flashing a rom. Without result, keeps saying the s/w upgrade, please wait while upgrading.
Also tried smartflashing with v30a, no result.
I can install the new bootloader an the ics partitition size.
I also tried a full restore ROM and Data (Kernel, System, Data), no result
Click to expand...
Click to collapse
Looks like you are on old bootloader but not completed the full flashing....
I think it is better to do a nvflash .....download the nvflash tool AIOT or progmaq nvflash tool....
Be aware that you will loose all the personal data.

I got the software upgrade screen once on stock unrooted Froyo. But that was due to my pressing the Volume key (I don't remember which one-most probably Volume Up) simultaneously when pressing the Power On key at start up. Are you doing anything similar.

Got the phone reset!!!
Used option 4 in the AIO toolkit and chose the for option 4. After this i flashed to new bootloader, and used option 1 in the tool to recover all.

Related

[Q] Help- Need help to root lg optimus black v20E

hi guys im running on gingerbread 2.3.4 V20E and i cant root my device. iv tried unlock root, gingerbreak superone click but doesn't work. also i gave tried blackjack v1.2 but i didnt get proper root access. HELP! thanks for reading!
ashvinfroyo said:
hi guys im running on gingerbread 2.3.4 V20E and i cant root my device. iv tried unlock root, gingerbreak superone click but doesn't work. also i gave tried blackjack v1.2 but i didnt get proper root access. HELP! thanks for reading!
Click to expand...
Click to collapse
No exploit will work... LG fixed that.. damn lg
Anyways why did not you search before, there are a no of threads regarding rooting.
Use cwm injection method and flash your rom again. http://forum.xda-developers.com/showthread.php?t=1512203
By the way you should try other custom roms here as well rather than stock.
A future reference and best rooting technique http://tinyurl.com/6t9vm27:thumbup:
Sent from my LG-P970 using XDA
First of all, since you're new to this board please read the Welcome To The LG Optimus Black Section..... (Please Read If You're New)
Also, read the [HOW TO]The Big N00B how-to! since it will answer most of your questions.
Second, if you would have searched you would have found your answer already, but i'll help you (i'm in a good mood today too ).
You can find an already rooted v20E firmware HERE.
Just follow the steps from THIS post but instead of using the V20B firmware files use the ones from the V20E firmware (i've already given the link to the V20E above).
Good luck and happy modding
Can't wipe data/factory reset
hello i just flashed my optimus black with smartflash as instructed i boot into recovery but however when i select wipe data there is no "yes" option to select i can only select no! HELP
Are you on cwm touch??? If you are, then yes option will be below the no. Scroll down with your volume rocker...
Sent from my LG-P970 using XDA
wow it worked!
thanks man it worked! many thanks!
ashvinfroyo said:
thanks man it worked! many thanks!
Click to expand...
Click to collapse
You are welcome ... by the way touch scrolling is also available... :-D
Sent from my LG-P970 using XDA
Smartflashtool has stopped working
Hi, my OB also has v20E firmware installed by default. I 've tried to root the phone by using smartflashtool method that has already been described above. However, whenever I tried to root my device, it always ended up in failures. The smartflashtool program either showed "Timeout error is occurred" (sometimes) up or "Smartflashtool MFC has stopped working" (most of the times) at various points in the rooting progress
I used all of the programs mentioned on the posts above but still no luck
- Installed LGSmartPhone_ModemlinkDUNDrive_WHQL_ML_Ver_1.0
- Installed LGWindowsMobile_USBDriver_WHQL_ML_Ver_1.0
- Installed LGUnitedMobileDriver_S4981MAN36AP22_ML_WHQL_Ver_3.6
- [patched]V20E_SEA.bin
- V20e_SEA.fls
And currently, my phone cannot boot into the main phone screen (it can only display LG logo at best). Please help!
b3aver said:
Hi, my OB also has v20E firmware installed by default. I 've tried to root the phone by using smartflashtool method that has already been described above. However, whenever I tried to root my device, it always ended up in failures. The smartflashtool program either showed "Timeout error is occurred" (sometimes) up or "Smartflashtool MFC has stopped working" (most of the times) at various points in the rooting progress
I used all of the programs mentioned on the posts above but still no luck
- Installed LGSmartPhone_ModemlinkDUNDrive_WHQL_ML_Ver_1.0
- Installed LGWindowsMobile_USBDriver_WHQL_ML_Ver_1.0
- Installed LGUnitedMobileDriver_S4981MAN36AP22_ML_WHQL_Ver_3.6
- [patched]V20E_SEA.bin
- V20e_SEA.fls
And currently, my phone cannot boot into the main phone screen (it can only display LG logo at best). Please help!
Click to expand...
Click to collapse
hi,
sure, you haven't root your device !
phone will reboot recovery
13. Wipe all data/factiry reset
14. flash Superuser.zip " for root device
15. Reboot system now
superuser.zip download : http://www.mediafire.com/?a1re78800owv3aj Flash with cmw touch in recovery
run smartflashtool with rights administrator also...
use this patched rom => http://forum.xda-developers.com/showpost.php?p=23833005&postcount=186
YkZ_1967 said:
hi,
sure, you haven't root your device !
phone will reboot recovery
13. Wipe all data/factiry reset
14. flash Superuser.zip " for root device
15. Reboot system now
Hi, thanks for your reply. Unfortunately, I haven't gotten to the point where the phone was rooted successfully (100%), whenever I tried to run B_SmartFlashTool_Extern.exe, it always ended up in error. What did I do wrong? I've used the appropriate files and installer, haven't I? Now, I'm totally freaked out because my phone has run out of battery and doesn't show any sign of charging even though I've connected the charger
Oh by the way, I've already used the patch rom for V20e, but still no avail and already tried running the program with admin rights
Click to expand...
Click to collapse
are you able to enter in S/W update mode now ?
key volume + and usb plugged
or use r&dtt method => http://forum.xda-developers.com/showthread.php?t=1111771
Ok, I'm totally freaked out now. I can't even start the S/W update mode anymore although I've been charging the phone for about 15 minutes. No, I don't know how to use r&dtt method, tried to read the post but I don't which one is r&dtt method. Can you help me? I've checked the charger and it felt warm after 15 minutes of charging though
b3aver said:
Ok, I'm totally freaked out now. I can't even start the S/W update mode anymore although I've been charging the phone for about 15 minutes. No, I don't know how to use r&dtt method, tried to read the post but I don't which one is r&dtt method. Can you help me? I've checked the charger and it felt warm after 15 minutes of charging though
Click to expand...
Click to collapse
remove the battery and leave five minutes without
phone must be on power off
plug usb cable and press volume keys+
say me if the phone can be enter in S/W update mode, i' m watching for LGFlashTool.exe, never used again, always unbrick my Ob with smartflash tools method
Question about root
Hi, I just root rights to V20O not only to root recovery, how to do it. Recovery mode without dissolving it.

[Q] is my i9000 bricked?

My i9000 respond to Downloading Mode (Volume Down+Home+Power) but it doesn't boot...the logo stay on and on until I decided to take off the battery.
Is there a foolproof method to recover my phone? It was locked to T-Mobile and has been unlocked to all networks and rooted - the ROM was Gingerbread 2.3 and working perfectly until I decided to "upgrade" to Jelly Bean...:silly:
I did backup the previous ROM via CWR but right now I can't access any partition...
Help!
with gazbil
Does ODIN recognize your phone when you're in download mode? If so, you should be able to flash gingerbread without losing all your data.
Skire90 said:
Does ODIN recognize your phone when you're in download mode? If so, you should be able to flash gingerbread without losing all your data.
Click to expand...
Click to collapse
thanks for your reply....
Yes Odin recognize my phone and I've tried to update using "JW4" (these 3 letters represent the end of a ROM file which isn't Gingerbread - I've followed this tip from another thread) - Odin says PASS (green box) but when I try to reboot the phone get stuck in Recovery mode (3?) - there are some errors, related to Data and Cache which I believe need to be erased from previous install but still no luck...
I'll try to post a picture of the error messages (or maybe I just copy the text here). At least the booting gives some signals now - there is a logo loop while before there was no boot whatsoever - so, things seems to improve a bit.
solved!
I've solved the problem by installing dbdata.rfs:
hope this helps others....
in the end I got into troubles because I didn't wipe data and cache before flashing the new ROM.

[SOLVED][ERROR] Device stuck on boot! Error: Boot Image Signature

Guys,
I'm relatively new to flashing recovery and ROMs..
So, sorry if this is a noob question..
I really need urgent help!
I am on V20a (ESA-XXX) and have successfully rooted my phone.
I tried installing CWM using this method..
http://forum.xda-developers.com/showthread.php?t=2180138
I used the unsecure boot provided by gordon0001
http://forum.xda-developers.com/showthread.php?p=39918805&highlight=unsecure#post39918805
After i restarted my phone, it got stuck at boot!!
Its gives the following error and turns of in 5 seconds..
[LG-Security] Error: Boot Image Signature!
The phone doesn't start and does not go into recovery either..
The phone is not even recognised by my PC.. keeps restarting (to error screen) if i connect to pc..
Please, someone help me.. I'm really scared.. I don't want to lose my phone.. :crying:
I read a similar prob, but no solution found..
http://forum.xda-developers.com/showthread.php?t=2223697
PLEASE HELP!!
SOLUTION:
Reflash .kdz via Software Upgrade Mode (hold Power button and Volume - )
Dude, reflashing your phone should work. As long as SW mode is still accessible, your phone isn't dead yet. Follow the instructions on this post http://forum.xda-developers.com/showthread.php?p=35971349 Be freaking sure all necessary drivers are properly installed.
Or you can put your phone in recovery mode (power + vol +) and reinstall the stock rom using recovery LG tools providing your Internet connection is fast and stable
Sent from my LG-P880 using Tapatalk 2
hey dude, i have flashed 7 times exactly since this morning only. and i have gotten that error 3 times of those 7. so it should not be a problem
Thanks!
After a few attempts, was able to go to the s/w upgrade mode.. (power + vol(-) )
Reflashed .kdz and it's all good.. (had to root again)
Actually, i was freaked out more coz it's my new phone and i didn't find others with the problem..
I hope that this thread would help if anyone faces a similar problem in the future..
Thanks for the prompt response, guys!
TechnoBraker said:
After a few attempts, was able to go to the s/w upgrade mode.. (power + vol(-) )
Reflashed .kdz and it's all good.. (had to root again)
Actually, i was freaked out more coz it's my new phone and i didn't find others with the problem..
I hope that this thread would help if anyone faces a similar problem in the future..
Thanks for the prompt response, guys!
Click to expand...
Click to collapse
You don't read a lot, right?...
If I had 100€ for each user that had that same problem...
(thinking about 1€, hummm?... of course not, 100's better)
TechnoBraker said:
Guys,
I'm relatively new to flashing recovery and ROMs..
So, sorry if this is a noob question..
I really need urgent help!
I am on V20a (ESA-XXX) and have successfully rooted my phone.
I tried installing CWM using this method..
http://forum.xda-developers.com/showthread.php?t=2180138
I used the unsecure boot provided by gordon0001
http://forum.xda-developers.com/showthread.php?p=39918805&highlight=unsecure#post39918805
After i restarted my phone, it got stuck at boot!!
Its gives the following error and turns of in 5 seconds..
[LG-Security] Error: Boot Image Signature!
The phone doesn't start and does not go into recovery either..
The phone is not even recognised by my PC.. keeps restarting (to error screen) if i connect to pc..
Please, someone help me.. I'm really scared.. I don't want to lose my phone.. :crying:
I read a similar prob, but no solution found..
http://forum.xda-developers.com/showthread.php?t=2223697
PLEASE HELP!!
SOLUTION:
Reflash .kdz via Software Upgrade Mode (hold Power button and Volume - )
Click to expand...
Click to collapse
But WHY AND HOW did it happen? have you flashed a custom rom now without errors?
GeBoe said:
But WHY AND HOW did it happen? have you flashed a custom rom now without errors?
Click to expand...
Click to collapse
You needed to unlock bootloader first, either "adb reboot oem-unlock" or download terminal emulator, root the phone and type:
su
echo 40000000c8 > /sys/firmware/fuse/odm_reserved
Sent from my rooted P880
I solved the problem flashing back to stock rom.
From this page http://lg-phone-firmware.com/ you may download your original stock rom.
WARNING: IF YOU FLASHED YOUR PHONE WITH A CUSTOM ROM, NEVER TRY TO FLASH BACK TO AN ORIGINAL STOCK ROM.
askinkoc said:
I solved the problem flashing back to stock rom.
From this page http://lg-phone-firmware.com/ you may download your original stock rom.
WARNING: IF YOU FLASHED YOUR PHONE WITH A CUSTOM ROM, NEVER TRY TO FLASH BACK TO AN ORIGINAL STOCK ROM.
Click to expand...
Click to collapse
And once again:
flashing stock is not at all dangerous. it will not brick your device or something else.
Sometimes you even have to re-stock your phone.
Stock is safe!
askinkoc said:
I solved the problem flashing back to stock rom.
From this page http://lg-phone-firmware.com/ you may download your original stock rom.
WARNING: IF YOU FLASHED YOUR PHONE WITH A CUSTOM ROM, NEVER TRY TO FLASH BACK TO AN ORIGINAL STOCK ROM.
Click to expand...
Click to collapse
haha, flashing the stock rom back can never be a problem..
that is the only rom which inherently supposed to be problem-free!
@non4 said:
You needed to unlock bootloader first, either "adb reboot oem-unlock" or download terminal emulator, root the phone and type:
su
echo 40000000c8 > /sys/firmware/fuse/odm_reserved
Sent from my rooted P880
Click to expand...
Click to collapse
just tried this ^^^ worked thanks
Had the exact same problem as TechnoBraker however if you held the power button as the phone turned to "power save" and you timed it perfectly it would start normally and as long as i didnt try to go into recovery mode it was fine
Hello. PLEASE, can anyone help me, I have a LG 4x and I've tried to flash CWM image from here http://forum.xda-developers.com/showthread.php?t=2298420 but I cannot entry after that in Software Update ( Volume - and Power button) and not even with (Volume + Home and Power Button). I get this error [LGE _SECURITY]error: boot image signature
[LGE _SECURITY]5 seconds after power is turned off for power saving
My phone start very well, I can talk from him but I can not make Factory Reset and flash back the stock rom.
Sorry for my english and I hope someone can help me!
Thank you!
alexxutzu said:
Hello. PLEASE, can anyone help me, I have a LG 4x and I've tried to flash CWM image from here http://forum.xda-developers.com/showthread.php?t=2298420 but I cannot entry after that in Software Update ( Volume - and Power button) and not even with (Volume + Home and Power Button). I get this error [LGE _SECURITY]error: boot image signature
[LGE _SECURITY]5 seconds after power is turned off for power saving
My phone start very well, I can talk from him but I can not make Factory Reset and flash back the stock rom.
Sorry for my english and I hope someone can help me!
Thank you!
Click to expand...
Click to collapse
you installed cwm without unlocking bootloader. re-flash 20a/20b (jellybean 4.1.2) kdz, then unlock your bootloader, then install any custom recovery you want/need
Have i go bak to JB anytime?
Flying_Bear said:
you installed cwm without unlocking bootloader. re-flash 20a/20b (jellybean 4.1.2) kdz, then unlock your bootloader, then install any custom recovery you want/need
Click to expand...
Click to collapse
HEy
I have a question:
Have I flash to JB back anyway or can I only Unlock my BL and then it will work?
Sry my English is very bad
mivoe99 said:
HEy
I have a question:
Have I flash to JB back anyway or can I only Unlock my BL and then it will work?
Sry my English is very bad
Click to expand...
Click to collapse
Bootloader unlocking is only available if you're on JB. If your boot image is faulty you need to revert back to official JB.
Sent from my LG-P880 using XDA Premium 4 mobile app
Ok, but I haven't installed a cousom ROM
Omario-242 said:
Bootloader unlocking is only available if you're on JB. If your boot image is faulty you need to revert back to official JB.
Sent from my LG-P880 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I havent' installed a cusotm ROM yet. I have only installed CWM with ROM Manager, but i have already tried to delete the CWM I want to flash it manual.
My ROM is the normal LG P880 ROM JB.
How or have I go back to the normal JB?
Sry for my English I'm german
mivoe99 said:
I havent' installed a cusotm ROM yet. I have only installed CWM with ROM Manager, but i have already tried to delete the CWM I want to flash it manual.
My ROM is the normal LG P880 ROM JB.
How or have I go back to the normal JB?
Sry for my English I'm german
Click to expand...
Click to collapse
German here too
So if I understood you right, you tried to install CWM without unlocking your boot loader? So now you got a boot image error? I'd suggest to try LG Mobile Support Tool and flash V20A/V20B and then unlock Boot loader. Even if you're on "official JB" as of now, installing CWM without unlocked bootloader screwed your boot image and there's no way to do anything without flashing back a kdz.
Sent from my LG-P880 using XDA Premium 4 mobile app
LG Mobil Support Tool doesn't work
Omario-242 said:
German here too
So if I understood you right, you tried to install CWM without unlocking your boot loader? So now you got a boot image error? I'd suggest to try LG Mobile Support Tool and flash V20A/V20B and then unlock Boot loader. Even if you're on "official JB" as of now, installing CWM without unlocked bootloader screwed your boot image and there's no way to do anything without flashing back a kdz.
Sent from my LG-P880 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hey,
I have tried to do the Update to the Firmware by LG Mobile Support Tool but there is a Error every try. I have tried it about ten times but the Update fails every time. What can I do now? :/
There is no Error Code or something.
Can help a factory reset there?
Or should i falsh the Original Recovery with the All-in-One toolkit?
mivoe99 said:
Hey,
I have tried to do the Update to the Firmware by LG Mobile Support Tool but there is a Error every try. I have tried it about ten times but the Update fails every time. What can I do now? :/
There is no Error Code or something.
Can help a factory reset there?
Or should i falsh the Original Recovery with the All-in-One toolkit?
Click to expand...
Click to collapse
Could be due to wrong drivers. Reinstall them and try again.
Sent from my LG-P880 using XDA Premium 4 mobile app
Reinstalled Drivers
Omario-242 said:
Could be due to wrong drivers. Reinstall them and try again.
Sent from my LG-P880 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hey,
I have reinstalled the drivers for my device, but the installation failed again.
What can I do else? :/

[Q] Root/bootloader problem

Hello,
I tried to root my P990 with option 3 from All-In-One Toolkit. All went well until it asked me to change to a new ICS bootloader. I choose the second option ICS-cwm-6.0.2.5.img. It went well until it wanted to send ics-bootloader.bin to the phone. It got stuck at 655360/891024 bytes sent. Now my phone won't start. What should I do?
username10000 said:
Hello,
I tried to root my P990 with option 3 from All-In-One Toolkit. All went well until it asked me to change to a new ICS bootloader. I choose the second option ICS-cwm-6.0.2.5.img. It went well until it wanted to send ics-bootloader.bin to the phone. It got stuck at 655360/891024 bytes sent. Now my phone won't start. What should I do?
Click to expand...
Click to collapse
Use AIO P990 TOOL that is in the Android Develpment, there is an option to change to GB/ICS layout , try it, and you will have your phone running again!
MrAlez said:
Use AIO P990 TOOL that is in the Android Develpment, there is an option to change to GB/ICS layout , try it, and you will have your phone running again!
Click to expand...
Click to collapse
I tried it but I still get errors. I tried all 3 options from the ICS layout. I even tried the GB versions.
I also forgot to mention that I have android 4.0(V30b).
username10000 said:
I tried it but I still get errors. I tried all 3 options from the ICS layout. I even tried the GB versions.
I also forgot to mention that I have android 4.0(V30b).
Click to expand...
Click to collapse
have you try installing a OFFICIAL STOCK FIRMWARE? after a you change the layout you have to FLASH your device
MrAlez said:
have you try installing a OFFICIAL STOCK FIRMWARE? after a you change the layout you have to FLASH your device
Click to expand...
Click to collapse
But how can I install a official stock firmware? I cannot open my phone. I can only enter in APX mode.
EDIT:
I managed to complete the layout change, but the phone still doesn't turn on. I tried to reinstall the stock rom with SmartFlash but it gave me an error at some point.
username10000 said:
But how can I install a official stock firmware? I cannot open my phone. I can only enter in APX mode.
EDIT:
I managed to complete the layout change, but the phone still doesn't turn on. I tried to reinstall the stock rom with SmartFlash but it gave me an error at some point.
Click to expand...
Click to collapse
search for a KDZ GB file if you changed to the OLD Layout, then use AIO to restore the KDZ and follow all the instruction, then you will have your phone with the stock rom
MrAlez said:
search for a KDZ GB file if you changed to the OLD Layout, then use AIO to restore the KDZ and follow all the instruction, then you will have your phone with the stock rom
Click to expand...
Click to collapse
I have the new layout. I tried to restore the KDZ with the off-line LG tool but it kept saying that to connect the phone to the computer. I also tried with the SmartFlash tool but it kept timing out.
EDIT:
I did it. Thanks for the help.
username10000 said:
I have the new layout. I tried to restore the KDZ with the off-line LG tool but it kept saying that to connect the phone to the computer. I also tried with the SmartFlash tool but it kept timing out.
EDIT:
I did it. Thanks for the help.
Click to expand...
Click to collapse
No problem mate! I'm Glad i helped you !

Many Problems with installing Cyanogenmod on LG Optimus 4X HD...

Hello everybody,
so I'm as new to this forum as I am to the android world. Just this Wednesday i bought a new LG Optimus 4X HD on amazon.de
Thought it would be nice to start of with Cyanogenmod.
So I started my search for some good "How-To's"...it were many I went through and I already invested many hours in getting this running. Sadly it still doesn't work. I actually wanted to stay with one How-To but at one point there's always a download not working so that other sources are needed.
So what did I do...
-I rooted it yes (at this point I needed to download "Rooting Toolkit for Optimus 4X HD" which wasn't downloadable so i switched to another How-To, btw. first How-To: http://androidlegend.com/android-4-2-1-via-cyanogenmod-10-1-for-lg-optimus-4x-hd-p880-cm10-1/
-Installed "LG 4X Recovery 1.2" and installed this way CWM.
-At another point here I installed ROM Manager, installed it and went into Recovery and here happend the first problem, kernel panic.
Said something like "couldn't load kernel/wrong kernel", kernel panics...Me panics too
Anyway, force kill -> auto reboot -> still kernel panic -> again -> batterie out and a few times with usb cable connected to PC -> Batterie again, works :good:
Ok so Clockworkmods Rom Manager seemed to be not that good... did recovery boot with LG 4X Recovery, tada works, I go into the folder with the Cyanogenmod-zip and want to start the ROM installation and it says Status 7 (of course I googled Status 7 and searched here in the xda-boards for it, nothing helpful found yet)
Installed older version of LG 4X Recovery (1.1), still same fault.
I uninstall the ROM manager, redownload and reinstall, try to backup -> Kernel panic.
I search for a different How-To, yet nothing good happened. Others go something similar and say "at booting press On-Button and Volume down-button at the same time", I do that -> Kernel panic
I have no idea whats wrong with the kernel...but normal booting works fine.
Next I read something about needing to unlock bootloader, have a workthrough aka this http://forum.xda-developers.com/showthread.php?t=2224020
After I enter "adb reboot oem-unlock" in DOS command window it should say something concerning "open bootloader", but not in my case, just a normal reboot happened (this is what it looks like at least). Checking the hidden menu also doesn't show anything as I don't have the option with the boot-loader status there.
Next trick, I go to LG Recovery again and first wipe the whole stuff and try then the Cyanogen istall, still doesn't work and as I wasn't able to backups before (tried Titanium but it froze at 12% and the stuff about ROM Manager is told^^) I now had a clean factory install, all my work before lost, nothing rooted and still a kernel which panics when I do the "safe-boot"(this volume- and on-button-thing).
I also tried 3-All-in-one solutions, neither of them worked. (2 german ones, and one english one)
So I think thats it, ah wrong, still not finished. I also tried to install a new kernel to erase that f****ng problem with the kernel panic. I choose to use WerwewolfJB_v005 http://forum.xda-developers.com/showthread.php?t=2256899
the easy and fast way made the same as the try before with the "open bootloader"-try, just normal restart. When I enter the second line in the command line, it just says "waiting for device".
So yeah, thats it. I don't know what else to do. Does anyone know what I could also do, or is this case unsolvable? Is the Smartphone broken or did I make a mistake at any point? What should I do?
I'd be super glad if anyone could help me here. I hope I described my case well enough. I hope I didn't forget anything.
Thanks in advance!
Greetz chrisus
I am also new to this stuff but maybe i could help you anyway
What is the Firmware Version of your phone?
(Sorry for bad english )
The old "adb reboot oem-unlock" didn't work for me on UK, v234-000 either. I followed this thread instead and it worked perfectly first time.
As long as your phone has been turned on and connected to the network for long enough on v20x you should be fine - once you get the notification from LG about your phone being registered or similar then you'll be fine, normally a couple of hours.
Just reflash your phone to stock, wait for the notification and try the two-step method from the above post and you should be fine.
root , recorery and unlock boot loader
you must have your bootloader unlocked in order to flash kernels
( this worked for me but I can't guarantee it will work for others you can only try !! be aware when messing with firmware and bootloader you warranty could be voided )
make sure your phone is rooted you know if it is rooted because you will have superuser installed in your apps ( grey square icon with green android head on it ). if not I used this method to root my phone so try this http://forum.xda-developers.com/showthread.php?t=2180688
if your phone is rooted next you will need a recovery this will help to backup your phone and create a restore point so in case any thing goes wrong. to install a recovery go to play store and download rom manager ( clockworkmod ) once installed open rom manger and select recovery setup. then select install or update recovery then select your phone ( lg optimus 4x hd). then select flash clockworkmod recovery. and then wait while it downloads and setup . hopefully when finished it will say succesfull. ( make sure phone is rooted or it wont work ) to check clockwork mod is working you can reboot into recovery through rom manager or power off phone then hold volume down key press power button to power up but keep holding volume down key until recovery boot up. ( be a wise option to backup phone now in recovery)
next to unlock bootloader ( so you can flash roms with kernels) go to this thread, http://forum.xda-developers.com/showthread.php?t=2224020
and download the BL_unlock_new .rar file when its download copy it to your desktop on pc and then extract it to desktop on pc . now make sure your phone is not connected to your computer go to phone settings,then go to development options, and then select usb debugging on. once debugging is on now connect your phone to pc wait for it to connect you can keep your phone on charging mode. now open the BL_unlocking_new extracted folder on desktop on pc and double click on the BL_unlock file a box should open up on your desktop asking you to tap a key to continue so press a key now your phone should reboot and some white writing will appear on screen .on your desktop the bottom line should say please... now tap a key on computer it should say press any key to continue < waiting for device> now disconnect phone from computer look on phone screen it should say now ready! now hold power button for 10 secs and let phone reboot. to test if bootloader is unlocked on phone go to dail pad and dail this 3845#*880# you should get the hidden menu on your screen scroll down to bootloader unlock check and select then select bootloader unlock check and hopefully it should say unlock...
now you have root , recovery and bootloader unlock, now you can download a rom for this phone copy rom ( should be a zip file ) to your phone then open rom manager on phone and reboot in to recovery or power off phone, hold volume down button then press power button should now boot into recovery then you want to use volume keys to scroll down and select wipe data/factory reset with power button then scroll down and select advanced then scroll down and select wipe dalvik cache then you want to select go back then select install zip from sd card then select where you saved your rom sd card or external sd card then select rom then select install...
hopefully if that's helped you or anybody else ...
Hursty uk said:
next to unlock bootloader ( so you can flash roms with kernels) go to this thread, http://forum.xda-developers.com/showthread.php?t=2224020
and download the BL_unlock_new .rar file
Click to expand...
Click to collapse
If the OP can possibly get his bootloader unlocked following the official method then he should, rather than using that file. Nobody really knows what all the 'fuses' that are blown by using that file do and that would certainly result in his warranty being voided in any country, whereas in a lot of countries his warranty won't actually be voided by using the official unlock method.
added warning
SimonTS said:
If the OP can possibly get his bootloader unlocked following the official method then he should, rather than using that file. Nobody really knows what all the 'fuses' that are blown by using that file do and that would certainly result in his warranty being voided in any country, whereas in a lot of countries his warranty won't actually be voided by using the official unlock method.
Click to expand...
Click to collapse
edited last post with a warning you could void warranty !!
Ok, thanks for the answers so far. But still, wasn't able to get any further.
@Dexxon: Firmware version is 4.0.3
Besides: Kernel Version is 2.6.39.4 and there's also something written like "[email protected] #1" in the hidden menu...is this normal? AP Bootloader Verison unknown and AP OS Version is 2.6.39.4 also this jinwoo...
@SimonTS: I tried to unlock the bootloader with your link and advices (which is the same as i tried before).
Got a message saying "Thanks for buying this LG Phone..blabla" and I guess thats what you mentantioned about that informing.
Battery was loaded to 100% so i connected it to PC, said "LG Software Mode Connection" on the phone (before I always took that "data exchange connection"), went to the adb folder and made a command window there, entered "adb reboot-bootloader", smartphone reboots, should stay in LG window screen, but it doesn't. It just boots totally normal into the home screen.
@Hursty uk: As I said in the first post. Everything regarding the ROM Manager from CWM sends my Phone into kernel panic. As this is quite hard to get a normal reboot again (even battery out for some time and back-in doesn't solve this) I really prefere to not use this option. As it is just frustrating and doesn't help.
And yes it is already rooted (I have SuperSU and I checked it with the "Root Checker"-App) Everything says it is rooted. I rooted it with that method: androidlegend.com/how-to-root-lg-optimus-4x-hd-o4x-p880
Ah I really don't know what else to do. Is something just wrong with my device?
btw I also can't do a software update with the LG Software from there website, so I could at least go 4.1 instead of 4.0.3 atm...
When I try it that way, and install the USB-Drvier for LG P880 the SW-Update button stays grey and is unclickable even though the phone is connected.
chrisus said:
Ok, thanks for the answers so far. But still, wasn't able to get any further.
@Dexxon: Firmware version is 4.0.3
Besides: Kernel Version is 2.6.39.4 and there's also something written like "[email protected] #1" in the hidden menu...is this normal? AP Bootloader Verison unknown and AP OS Version is 2.6.39.4 also this jinwoo...
@SimonTS: I tried to unlock the bootloader with your link and advices (which is the same as i tried before).
Got a message saying "Thanks for buying this LG Phone..blabla" and I guess thats what you mentantioned about that informing.
Battery was loaded to 100% so i connected it to PC, said "LG Software Mode Connection" on the phone (before I always took that "data exchange connection"), went to the adb folder and made a command window there, entered "adb reboot-bootloader", smartphone reboots, should stay in LG window screen, but it doesn't. It just boots totally normal into the home screen.
@Hursty uk: As I said in the first post. Everything regarding the ROM Manager from CWM sends my Phone into kernel panic. As this is quite hard to get a normal reboot again (even battery out for some time and back-in doesn't solve this) I really prefere to not use this option. As it is just frustrating and doesn't help.
And yes it is already rooted (I have SuperSU and I checked it with the "Root Checker"-App) Everything says it is rooted. I rooted it with that method: androidlegend.com/how-to-root-lg-optimus-4x-hd-o4x-p880
Ah I really don't know what else to do. Is something just wrong with my device?
btw I also can't do a software update with the LG Software from there website, so I could at least go 4.1 instead of 4.0.3 atm...
When I try it that way, and install the USB-Drvier for LG P880 the SW-Update button stays grey and is unclickable even though the phone is connected.
Click to expand...
Click to collapse
To unlock the bootloader following either of the official methods requires you to be running v20x (The LG Stock v4.1 code) first, so that is why the commands are doing nothing for you.
For the moment, forget about CWM, Root, Bootloaders etc - the key thing is to get your phone working again. Can you reinstall stock v10x software following the guide on this page?
SimonTS said:
To unlock the bootloader following either of the official methods requires you to be running v20x (The LG Stock v4.1 code) first, so that is why the commands are doing nothing for you.
For the moment, forget about CWM, Root, Bootloaders etc - the key thing is to get your phone working again. Can you reinstall stock v10x software following the guide on this page?
Click to expand...
Click to collapse
He might as well just flash JB with flashtool, saves him flashing ICS just to flash JB straight after
Sent from my rooted P880
SimonTS said:
To unlock the bootloader following either of the official methods requires you to be running v20x (The LG Stock v4.1 code) first, so that is why the commands are doing nothing for you.
For the moment, forget about CWM, Root, Bootloaders etc - the key thing is to get your phone working again. Can you reinstall stock v10x software following the guide on this page?
Click to expand...
Click to collapse
that would of been my next answer @SimonTS . A while back a flashed something on my phone and it got stuck at the lg bootup picture what I had to do was re-install original firmware ( through KDZ files) to get my phone working. I would try the link @SimonTS suggested .
@non4 said:
He might as well just flash JB with flashtool, saves him flashing ICS just to flash JB straight after
Click to expand...
Click to collapse
Indeed - sorry, having a slightly dense day and was more thinking about getting him back to the stage at which his phone was working correctly before.
SimonTS said:
To unlock the bootloader following either of the official methods requires you to be running v20x (The LG Stock v4.1 code) first, so that is why the commands are doing nothing for you.
For the moment, forget about CWM, Root, Bootloaders etc - the key thing is to get your phone working again. Can you reinstall stock v10x software following the guide on this page?
Click to expand...
Click to collapse
Thanks for that link, I tried it but that also didn't work (at least I guess so...)
I did everything like said at the link but at the last point the program (kdz_fw_upd.exe) crashes. Tried it 3 times, every time as administrator like mentioned in that forum post. I'm using Win 8 64bit btw...
Screenshot is in the attached .jpg. My system is japanese, but I think you can figure out what this kind of window means. It just says that the program isn't responding and needs to be shutdown.
I tried it like mentioned with putting the battery back in when the log starts and without putting it back in, in both cases the program crashes after a few seconds (~10 secs) when started.
Where do I actually see which V**x version is installed? If v10x or v20a? Surprisingly the LG Support Tool said I have v10H when the phone was still connected after the crash. And it offered me a SW-Update. But I haven't done that one yet, not sure if that would work correct...
@ chrisus
man, what is your phone status now?
in what situation you are actually?
gtdaniel said:
@ chrisus
man, what is your phone status now?
in what situation you are actually?
Click to expand...
Click to collapse
Freshly wiped so its factory reset, just rooted and LG 4X Recovery installed (for CWM touch). Nothing more.
Following Informations from Root Checker-App:
Product: x3_open_eu
Host: buildgb2
User: jinwoo.lee (wtf? i don't know what should be here at the point user, but that is clearly not me, is this factory set style?)
Additional Phone Informations from settings:
Android version: 4.0.3
Kernel version: 2.6.39.4
Build number: IML74K
Software version: LG-P880-V10h-NOV-19-2012 (ah now I see where that v10x-info is^^)
chrisus said:
Freshly wiped so its factory reset, just rooted and LG 4X Recovery installed (for CWM touch). Nothing more.
Following Informations from Root Checker-App:
Product: x3_open_eu
Host: buildgb2
User: jinwoo.lee (wtf? i don't know what should be here at the point user, but that is clearly not me, is this factory set style?)
Additional Phone Informations from settings:
Android version: 4.0.3
Kernel version: 2.6.39.4
Build number: IML74K
Software version: LG-P880-V10h-NOV-19-2012 (ah now I see where that v10x-info is^^)
Click to expand...
Click to collapse
cool!
i am glad you can bring the phone in working status again.
now you have to do to put cyanogen on your phone is:
1. install JB 4.1.2 update
2. root it again
3. install CWM Recovery again
4. unlock bootloader
for first step go to:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=
after <=> put your IMEI number
and download a v20a version compatible with your device
and apply update
if you are again in trouble post here...
and if you are else to do, please post here to not make to loose time...
gtdaniel said:
cool!
i am glad you can bring the phone in working status again.
now you have to do to put cyanogen on your phone is:
1. install JB 4.1.2 update
2. root it again
3. install CWM Recovery again
4. unlock bootloader
for first step go to:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=
after <=> put your IMEI number
and download a v20a version compatible with your device
and apply update
if you are again in trouble post here...
and if you are else to do, please post here to not make to loose time...
Click to expand...
Click to collapse
+1 this. Also, there have been many problems with running these apps using Windows 8, and you need to make sure you're not using a USB 3 port as they being other problems in to the equation.
gtdaniel said:
cool!
i am glad you can bring the phone in working status again.
now you have to do to put cyanogen on your phone is:
1. install JB 4.1.2 update
2. root it again
3. install CWM Recovery again
4. unlock bootloader
for first step go to:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=
after <=> put your IMEI number
and download a v20a version compatible with your device
and apply update
if you are again in trouble post here...
and if you are else to do, please post here to not make to loose time...
Click to expand...
Click to collapse
Ok so I've flashed JB with the LG Updater (without batterie and volume down button pressed connecting to PC, than start the update -> meanwhile putting batterie back in)
JB worked just fine and I also don't had the problem with the kernel panic when booting with volume down and power button.
So I thought, everything fresh and also different, I might give the ROM Manager App again a try (after I rooted it that way: http://forum.xda-developers.com/showthread.php?t=2180688 )...well, wasn't that smart. After I installed the Recovery for P880 in the ROM Manager, i made a normal boot (just for sure), back in the app, i wanted to go into Recovery mode and again kernel panic, bit different this time cause it does a shutdown after 5 seconds^^
Anyway, this way it didn't work, from now on I also couldn't go into safe mode anymore, same kernel panic.
As this kind of recovery doesn't seem to work, I tried the "old" way with the "LG 4X Recovery" I mentioned before. After recovery installation i just wanted to boot normal aaaand nothing happened. It stayed in the LG screen. Restart and anything didn't help here so I backed back to v10H with previous methods. Now I just got a security error saying "morning call is empty", no idea what that means but I just did the same method for JB again.
Worked afterwards, so I wanted to try it without ROM Manager Recovery installed and just LG 4X Recovery, (after rooted again of course) and it didn't boot again. Same game again.
So now I have JB installed, I'm going to root it now again, but I don't know what way I should go for doing the Recovery Part. I'm stuck on point 3 here
Any advices? btw thanks a lot until here, at least I made it half-way-through to JB now. Worst case I'd stay with that one at least.
I'm not entirely sure which threads you've been reading. Once you have the stock v20x ROM on your phone, just leave it alone for a few hours and make sure it is fully charged
After that, try to unlock the bootloader before doing anything else. If that works then you can worry about CWM and custom ROMs.
chrisus said:
Ok so I've flashed JB with the LG Updater (without batterie and volume down button pressed connecting to PC, than start the update -> meanwhile putting batterie back in)
JB worked just fine and I also don't had the problem with the kernel panic when booting with volume down and power button.
So I thought, everything fresh and also different, I might give the ROM Manager App again a try (after I rooted it that way: http://forum.xda-developers.com/showthread.php?t=2180688 )...well, wasn't that smart. After I installed the Recovery for P880 in the ROM Manager, i made a normal boot (just for sure), back in the app, i wanted to go into Recovery mode and again kernel panic, bit different this time cause it does a shutdown after 5 seconds^^
Anyway, this way it didn't work, from now on I also couldn't go into safe mode anymore, same kernel panic.
As this kind of recovery doesn't seem to work, I tried the "old" way with the "LG 4X Recovery" I mentioned before. After recovery installation i just wanted to boot normal aaaand nothing happened. It stayed in the LG screen. Restart and anything didn't help here so I backed back to v10H with previous methods. Now I just got a security error saying "morning call is empty", no idea what that means but I just did the same method for JB again.
Worked afterwards, so I wanted to try it without ROM Manager Recovery installed and just LG 4X Recovery, (after rooted again of course) and it didn't boot again. Same game again.
So now I have JB installed, I'm going to root it now again, but I don't know what way I should go for doing the Recovery Part. I'm stuck on point 3 here
Any advices? btw thanks a lot until here, at least I made it half-way-through to JB now. Worst case I'd stay with that one at least.
Click to expand...
Click to collapse
ok.
now i suppose you have a functional rooted JB 4.1.2 device.
from that you have to going on to rest of the steps to have CM installed on your device.so if it is not that (functional rooted JB device) is need to flash again JB and rooted again.
if you have the proper kdz file the tutorial for flasing is there: http://forum.xda-developers.com/showthread.php?t=2069723
and the tutorial for rooting device is there: http://forum.xda-developers.com/showthread.php?t=2180688&highlight=root+jb+4+1+2+
after that make some reboot of device to verify that:
1. the device boot to system normaly a few times (just let the device boot itself)
2. the device enter in S/W Upgrade Mode (with the device off, put the USB cable in device and PC or in device and AC adapter and press VOL DOWN + POWER) a few times
3. the device boot in Stock Recovery (with the device off, press VOL DOWN + POWER) a few time.
if you can manage to do this tree steps a few times normaly then you have a fully functional device and we go to next step that is Custom Recovery
the chance to make this steps without errors is more big if you start from scratch meaning fully wipe the device and flashing stock LG software on the device.
so, let as know here when you are ready...
gtdaniel said:
ok.
now i suppose you have a functional rooted JB 4.1.2 device.
from that you have to going on to rest of the steps to have CM installed on your device.so if it is not that (functional rooted JB device) is need to flash again JB and rooted again.
if you have the proper kdz file the tutorial for flasing is there: http://forum.xda-developers.com/showthread.php?t=2069723
and the tutorial for rooting device is there: http://forum.xda-developers.com/showthread.php?t=2180688&highlight=root+jb+4+1+2+
after that make some reboot of device to verify that:
1. the device boot to system normaly a few times (just let the device boot itself)
2. the device enter in S/W Upgrade Mode (with the device off, put the USB cable in device and PC or in device and AC adapter and press VOL DOWN + POWER) a few times
3. the device boot in Stock Recovery (with the device off, press VOL DOWN + POWER) a few time.
if you can manage to do this tree steps a few times normaly then you have a fully functional device and we go to next step that is Custom Recovery
the chance to make this steps without errors is more big if you start from scratch meaning fully wipe the device and flashing stock LG software on the device.
so, let as know here when you are ready...
Click to expand...
Click to collapse
he should unlock bootloader before flashing custom recovery.
so, dont use rom manager before you unlock bootloader, that's why you get kernel panics.

Categories

Resources