Related
Hello,
Few days ago i bought HTC At&t Tilt/8925 in USA. Now i'm at home in europe and need to unLock it.
Also find in Ebay lots, where people who have access to some databases sell "UNLOCK Code For *At&t/Cingular* Tilt/8925", but they need IMEI code of phone at first.
So my question is how to find IMEI phone on locked phone?
As i know i must type "*#06#", but how can i do it, if the only sreen that i can view is
Network is locked, please input unlock code.
To make an emergency call, type the emeregency number and tap emergency
And field under that, where i must type unlock code?
Click to expand...
Click to collapse
So where i must type "*#06#"? in the that field and click ok? I'm afraid, that phone can understand that it's unlock code (and as i know i cann't type more than 5 wrong codes )
Any advice will be appreciated
remove the battery and it should be listed on the phone.
Or type *#06# in your phone dailer .
denco7 said:
Or type *#06# in your phone dailer .
Click to expand...
Click to collapse
i cann't type, as there is one field just for UNLOCK CODE.
Typing in this field will be understand, as UNLOCK CODE
remove the battery and it should be listed on the phone.
Click to expand...
Click to collapse
really
thx
there are 3 codes:
P/n
IMEI
S/N
Waw .. thanks ... so it's the right IMEI code?
Btw, need you advice , does unclocking phone with just codes (as on ebay) work really?
A check this guys have nice rating, but as you know sometimes, just ratings don't mean anything.
Once again, thank you ChumleyEX !
Normally you are able to get a code from at&t to unlock it so I would pay for anything. Also I think you can use a method from this site to unlock.
I'm not sure if you're able to call at&t, but if you can, just call them and tell them you are traveling over seas and you need to unlock it.
http://forum.xda-developers.com/showthread.php?t=361039
;-)
Note for WM6.1 users
================
Do not try this on 6.1! You will need to downgrade to 6.0
REMOVE YOUR SIM CARD!
That will stop the "Network Lock" Message from displaying.
Then you can get your IMEI from the Device Information Page or actually get into Windows Mobile and be able to use the Unlocker found here in the forums.
alexod said:
Note for WM6.1 users
================
Do not try this on 6.1! You will need to downgrade to 6.0
Click to expand...
Click to collapse
Is it mean, that at first i must downgrade it to 6.0, unlock and only after this upgrade to 6.1 ?
Exactly.
filler
I got a note 3 clean IMEI (checked it at swappa) unlocked it via cellunlocker put in a metro sim and got this message: phone not allowed code mm#6 (the phone was rooted using kingo root)
any ideas out there?
thank you.
same problem here but i was using the phone with diferent carrier for over a year and recently the mm#6 poped up
Maybe check the imei here: http://www.protectyourdata.ca/check-the-status-of-your-device-in-canada/
The website refers to Canada but I have used it for us carrier phones too.
laraujo417 said:
I got a note 3 clean IMEI (checked it at swappa) unlocked it via cellunlocker put in a metro sim and got this message: phone not allowed code mm#6 (the phone was rooted using kingo root)
any ideas out there?
thank you.
Click to expand...
Click to collapse
Just because an IMEI is good doesn't mean the phone isn't locked to one network( doesn't apply to you but someone else maybe). Also, all these IMEI checking sites are very misleading. If a phone is under contract the IMEI always shows good. They sell the phone but later stop paying, guess what happens?
Hi guys,
I have a question, is there some way to find out the IMEI of my briked HTC ONE M7, having only the data printed in the back of the phone? I mean this data:
model: pn07120 fccid: nm8pn07120
sku: 6050a p/n: 99xxxxxxx-00
thank you
insigniared said:
Hi guys,
I have a question, is there some way to find out the IMEI of my briked HTC ONE M7, having only the data printed in the back of the phone? I mean this data:
model: pn07120 fccid: nm8pn07120
sku: 6050a p/n: 99xxxxxxx-00
thank you
Click to expand...
Click to collapse
Just how bricked is the phone. can you boot the Bootloader atleast?
Code:
fastboot getvar all
Will show the IMEI number. Failing that Do you still have the box and accompanying documentation, should have the IMEI printed some where.
insigniared said:
Hi guys,
I have a question, is there some way to find out the IMEI of my briked HTC ONE M7, having only the data printed in the back of the phone? I mean this data:
model: pn07120 fccid: nm8pn07120
sku: 6050a p/n: 99xxxxxxx-00
thank you
Click to expand...
Click to collapse
imei is also printed on the back of the box if you still have it
First, thank you for your promptly answers.
I don't have the box,
The phone has lost the sticker which use to have the imei printed in the back side.
I was planning to send the phone to htc warranty, due to the famous "qhsusb_dload" message.
But I now they require the imei number to proceed with the repairing process.
Thank you
insigniared said:
First, thank you for your promptly answers.
I don't have the box,
The phone has lost the sticker which use to have the imei printed in the back side.
I was planning to send the phone to htc warranty, due to the famous "qhsusb_dload" message.
But I now they require the imei number to proceed with the repairing process.
Thank you
Click to expand...
Click to collapse
Where did you get the phone? If it was a contract or carrier branded device you can contact them and say you need proof of purchase for warranty purposes.
They will send you a purchase order via e-mail
I'm pretty sure mine included the imei. I will check shortly to confirm.
Edit:- Yes the imei of the device was included on the proof of purchase.
Sent from my HTC One M7 - ARHD 82.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:
IMEI is printed on the bottom of the sim tray, if it's the original tray that came in the phone.
Sent from my DROID BIONIC using Tapatalk
^^^^this
He is right, never realized that and confirmed on mine. Look carefully you'll see the IMEI printed on one side of the sim tray
insigniared said:
First, thank you for your promptly answers.
I don't have the box,
The phone has lost the sticker which use to have the imei printed in the back side.
I was planning to send the phone to htc warranty, due to the famous "qhsusb_dload" message.
But I now they require the imei number to proceed with the repairing process.
Thank you
Click to expand...
Click to collapse
Hi, i have a nexus 6 thats is supposed to be from sprint. When I insert my GSM movistar or telcel sim card providers from Mexico, it will not pick up signal and it only says "emergency calls only" I dont know if the phone is supposed to be unlocked or if there is a special process for this. I have the link down here so you can see some pictures of my signal and everything.
Phone is running Root, Twrp, Chroma Rom if neccesary.
(Copy and paste this link to your browser)
photobucket.com/user/CellTech03/library/Nexus%206?sort=3&page=1
Thanks
CellTech03 said:
Hi, i have a nexus 6 thats is supposed to be from sprint. When I insert my GSM movistar or telcel sim card providers from Mexico, it will not pick up signal and it only says "emergency calls only" I dont know if the phone is supposed to be unlocked or if there is a special process for this. I have the link down here so you can see some pictures of my signal and everything.
Phone is running Root, Twrp, Chroma Rom if neccesary.
(Copy and paste this link to your browser)
photobucket.com/user/CellTech03/library/Nexus%206?sort=3&page=1
Thanks
Click to expand...
Click to collapse
its a nano sim, right? and its in the slot correctly? i dont think that sprint bought n6 are sim locked, but i could be wrong.
simms22 said:
its a nano sim, right? and its in the slot correctly? i dont think that sprint bought n6 are sim locked, but i could be wrong.
Click to expand...
Click to collapse
Sprint N6 are not SIM locked. For US carriers, only AT&T are SIM locked.
cam30era said:
Sprint N6 are not SIM locked. For US carriers, only AT&T are SIM locked.
Click to expand...
Click to collapse
right, as i said. but that leaves the op with another issue, either he/she put it in wrong, or its a bad sim card.
simms22 said:
right, as i said. but that leaves the op with another issue, either he/she put it in wrong, or its a bad sim card.
Click to expand...
Click to collapse
I agree with you. If I read the OP correctly, it sounds like he's not 100% positive it came from Sprint.
CellTech03 said:
Hi, i have a nexus 6 thats is supposed to be from sprint. When I insert my GSM movistar or telcel sim card providers from Mexico, it will not pick up signal and it only says "emergency calls only" I dont know if the phone is supposed to be unlocked or if there is a special process for this. I have the link down here so you can see some pictures of my signal and everything.
Phone is running Root, Twrp, Chroma Rom if neccesary.
(Copy and paste this link to your browser)
photobucket.com/user/CellTech03/library/Nexus%206?sort=3&page=1
Thanks
Click to expand...
Click to collapse
What model # is the phone? XT1100 or XT1103? If it is the domestic, XT1103, that might be the issue. You might need to have the XT1100 international version. However, I might be wrong. There were early reports when the phone was just being released, that certain Sprint models, sold through Amazon, were carrier locked. All units purchased directly from Sprint were unlocked. When and where did you get the device?
simms22 said:
its a nano sim, right? and its in the slot correctly? i dont think that sprint bought n6 are sim locked, but i could be wrong.
Click to expand...
Click to collapse
Hey there, yeah its a nano sim card it uses, the sim card is working perfectly since ive tryied it in other devices and its active running with service and all. Ive tried two diferent nano sims in this phone with the same outcome. Hoeping you already saw the images in the link, you think my signal is good?
Thanks
Evolution_Freak said:
What model # is the phone? XT1100 or XT1103? If it is the domestic, XT1103, that might be the issue. You might need to have the XT1100 international version. However, I might be wrong. There were early reports when the phone was just being released, that certain Sprint models, sold through Amazon, were carrier locked. All units purchased directly from Sprint were unlocked. When and where did you get the device?
Click to expand...
Click to collapse
Hi its an xt1103, ill upload a pic to that previous link of photobucket so you can see what it says in the boot up recovery. Shows model and all, I bought this through craigslist with oem box and all I double checked the meid on the box and phone to make sure it wasnt stolen was good. Guy told me it was tmobile and he clearly stated bad imei, which I truly doubt since when I check the meid through swappa it shows, sprint as carrier so most likely sprint with bad esn and it probably is a locked version. Hope you guys can get me going and let me know if it might be a signal problem or something.
Thanks
CellTech03 said:
Hey there, yeah its a nano sim card it uses, the sim card is working perfectly since ive tryied it in other devices and its active running with service and all. Ive tried two diferent nano sims in this phone with the same outcome. Hoeping you already saw the images in the link, you think my signal is good?
Thanks
Click to expand...
Click to collapse
good? no, you dont have a signal at all. are you sure that its from sprint? because att is the only us carrier that sim locks the phone. while you would need an international version, everything but lte should still work. maybe you put the sim in backwards?
---------- Post added at 06:18 PM ---------- Previous post was at 06:15 PM ----------
CellTech03 said:
Hi its an xt1103, ill upload a pic to that previous link of photobucket so you can see what it says in the boot up recovery. Shows model and all, I bought this through craigslist with oem box and all I double checked the meid on the box and phone to make sure it wasnt stolen was good. Guy told me it was tmobile and he clearly stated bad imei, which I truly doubt since when I check the meid through swappa it shows, sprint as carrier so most likely sprint with bad esn and it probably is a locked version. Hope you guys can get me going and let me know if it might be a signal problem or something.
Thanks
Click to expand...
Click to collapse
if it was a bad imei, you could try flashing the factory.img. does it list the imei number anywhere in the phone? or, in the main settings, in about phone, what does it say for baseband version?
simms22 said:
good? no, you dont have a signal at all. are you sure that its from sprint? because att is the only us carrier that sim locks the phone. while you would need an international version, everything but lte should still work. maybe you put the sim in backwards?
---------- Post added at 06:18 PM ---------- Previous post was at 06:15 PM ----------
if it was a bad imei, you could try flashing the factory.img. does it list the imei number anywhere in the phone? or, in the main settings, in about phone, what does it say for baseband version?
Click to expand...
Click to collapse
Hey there, I attached a photo to the photobucket that shows the baseband and all, when I do *#06# it shows MEID not imei and it starts with 99000 what I did notice is that the meid has one extra number at the end, when compared to the one written on the phones oem box but im thinking thats totally normal.
In about menu:
Baseband shows: MDM9625_104335.118.02.55.04R
When I turn of the phone and go into the fastboot screen baseband shows:
D4.0-9625-02.55.04
Thanks
CellTech03 said:
Guy told me it was tmobile and he clearly stated bad imei, which I truly doubt since when I check the meid through swappa it shows, sprint as carrier so most likely sprint with bad esn and it probably is a locked version. Hope you guys can get me going and let me know if it might be a signal problem or something.
Thanks
Click to expand...
Click to collapse
Neither T-Mobile nor Sprint are carrier locked. Only AT&T.
When you say "bad" IMEI, it unfortunately could mean that it's been blacklisted. Happens if the owner defaulted on his contract, or if it was reported stolen. If that's the case, you're SOL, unfortunately.
CellTech03 said:
Hey there, I attached a photo to the photobucket that shows the baseband and all, when I do *#06# it shows MEID not imei and it starts with 99000 what I did notice is that the meid has one extra number at the end, when compared to the one written on the phones oem box but im thinking thats totally normal.
In about menu:
Baseband shows: MDM9625_104335.118.02.55.04R
When I turn of the phone and go into the fastboot screen baseband shows:
D4.0-9625-02.55.04
Thanks
Click to expand...
Click to collapse
ok, well everything is there. you arent missing your radio. id try flashing tbe factory.img
---------- Post added at 06:40 PM ---------- Previous post was at 06:38 PM ----------
cam30era said:
Neither T-Mobile nor Sprint are carrier locked. Only AT&T.
When you say "bad" IMEI, it unfortunately could mean that it's been blacklisted. Happens if the owner defaulted on his contract, or if it was reported stolen. If that's the case, you're SOL, unfortunately.
Click to expand...
Click to collapse
oh yea, blacklisted! checking the imei will let you know if its blacklisted or not.
cam30era said:
Neither T-Mobile nor Sprint are carrier locked. Only AT&T.
When you say "bad" IMEI, it unfortunately could mean that it's been blacklisted. Happens if the owner defaulted on his contract, or if it was reported stolen. If that's the case, you're SOL, unfortunately.
Click to expand...
Click to collapse
Hey there, I did a swappa check and meid is clean and ready for activation it says. Swappa: MEID check says as follows -
Activation status: Clear (Sprint / MVNO) ,
blacklist: Not indicated, this device does not appear to be globally blacklisted.
Thanks
simms22 said:
ok, well everything is there. you arent missing your radio. id try flashing tbe factory.img
---------- Post added at 06:40 PM ---------- Previous post was at 06:38 PM ----------
oh yea, blacklisted! checking the imei will let you know if its blacklisted or not.
Click to expand...
Click to collapse
Hey there, I checked it and it shows clean, you can check my previous reply.
Also if I have Chroma, twrp and root exactly how can I flash the stock img? And where can I find it?
Thanks
CellTech03 said:
Hey there, I checked it and it shows clean, you can check my previous reply.
Also if I have Chroma, twrp and root exactly how can I flash the stock img? And where can I find it?
Thanks
Click to expand...
Click to collapse
you can find the factory.imgs here https://developers.google.com/android/nexus/images
you need to flash it via fastboot while youre in your bootloader. there are instructions here on xda as well. good luck!
hey please help me, do u fix it?
Hi ,
My brother bought P7-L10 from Kuwait and it worked well using SIM card from there. But when he reached India and tried Indian SIM card , it's not detecting. Tried different Service Providers SIM card, but still it's not detecting. Please let me know whether upgrading the firmware will solve the issue or not. It's having Build No: P7-L10V100R001C00B126 . Please help me to fix the problem. I've tried factory reset, but it doesn't worked.
RAJEEV A said:
Hi ,
My brother bought P7-L10 from Kuwait and it worked well using SIM card from there. But when he reached India and tried Indian SIM card , it's not detecting. Tried different Service Providers SIM card, but still it's not detecting. Please let me know whether upgrading the firmware will solve the issue or not. It's having Build No: P7-L10V100R001C00B126 . Please help me to fix the problem. I've tried factory reset, but it doesn't worked.
Click to expand...
Click to collapse
i think it's locked on that kuwaitien Service Provider, you have to unlock it
go to huawei Kuwait website get leatest update for your p7 from there
install it and i think its fix your problem
zaabolla said:
i think it's locked on that kuwaitien Service Provider, you have to unlock it
Click to expand...
Click to collapse
But "Enter SIM Unlock Code" prompt is not showing after inserting the SIM. After buying the code does it work?
RAJEEV A said:
But "Enter SIM Unlock Code" prompt is not showing after inserting the SIM. After buying the code does it work?
Click to expand...
Click to collapse
When you power on the phone, it is shown something else than Huawei (something like vodafone or orange)?
If so, the phone is locked on the respective network, and you must unlock it, like our collegue ranaji said.
If not, it is possible to be a cust problem. That means that your phone was made for a geaographic region, and it will not work properly with other networks than the ones on the specified region. If so, you must change your cust number.
First, you must see what your cust number is. For that, search on Settings, phone properties, the last line <Cust Number< and tell us what is it. Good luck!!!
The phone is a very good phone!!!
vd1122 said:
When you power on the phone, it is shown something else than Huawei (something like vodafone or orange)?
If so, the phone is locked on the respective network, and you must unlock it, like our collegue ranaji said.
If not, it is possible to be a cust problem. That means that your phone was made for a geaographic region, and it will not work properly with other networks than the ones on the specified region. If so, you must change your cust number.
First, you must see what your cust number is. For that, search on Settings, phone properties, the last line <Cust Number< and tell us what is it. Good luck!!!
The phone is a very good phone!!!
Click to expand...
Click to collapse
During power on, nothing else is showing other than Huawei. Then I think, as you said, it was made for a geographic region. Custom Version: CUSTC433D619.
I've done firmware update for the respective region, but it's of no use.
Please help to solve the problem.
ranajii said:
go to huawei Kuwait website get leatest update for your p7 from there
install it and i think its fix your problem
Click to expand...
Click to collapse
Updated latest firmware for the respective region, but same issue exists.
RAJEEV A said:
Updated latest firmware for the respective region, but same issue exists.
Click to expand...
Click to collapse
As i told you you have to unlock it, the problem is not in update firmware.
you have 2 choices:
1/ contact the koweitien opérator to get your unlock code
2/ go to repair office to unlock it with phone boxes (if exist)
zaabolla said:
As i told you you have to unlock it, the problem is not in update firmware.
you have 2 choices:
1/ contact the koweitien opérator to get your unlock code
2/ go to repair office to unlock it with phone boxes (if exist)
Click to expand...
Click to collapse
From Where you buy it in Kuwait?
Mine is from viva and im using it in Pakistan no any problem here
Some time when you cut you sim then its not working on some set check any other sim on your set
ranajii said:
From Where you buy it in Kuwait?
Mine is from viva and im using it in Pakistan no any problem here
Some time when you cut you sim then its not working on some set check any other sim on your set
Click to expand...
Click to collapse
It's also from VIVA. Tried different service provider SIM card (both cut & Micro). I think, I've to unlock it as suggested by Mr. Zaabolla.
zaabolla said:
As i told you you have to unlock it, the problem is not in update firmware.
you have 2 choices:
1/ contact the koweitien opérator to get your unlock code
2/ go to repair office to unlock it with phone boxes (if exist)
Click to expand...
Click to collapse
I've one doubt. "Enter SIM Unlock Code" prompt is not showing after inserting the SIM. Then how can I enter it after buying the code through online unlock website. Please help if it's a valid doubt.
RAJEEV A said:
I've one doubt. "Enter SIM Unlock Code" prompt is not showing after inserting the SIM. Then how can I enter it after buying the code through online unlock website. Please help if it's a valid doubt.
Click to expand...
Click to collapse
ok, to remove doubts, type this code in phone dialer ( * # * # 2846579 # * # * )
now you are in "ProjectMenu"
choose n°3 ( Network information Query )
now choose n°2 ( Sim Lock info )
if the phone is locked you will see " SIMLOCK_ACTIVE "
if not locked you see " SIMLOCK_DEACTIVE "
Hi,
It's showing "SIMLOCK_DEACTIVE".
zaabolla said:
ok, to remove doubts, type this code in phone dialer ( * # * # 2846579 # * # * )
now you are in "ProjectMenu"
choose n°3 ( Network information Query )
now choose n°2 ( Sim Lock info )
if the phone is locked you will see " SIMLOCK_ACTIVE "
if not locked you see " SIMLOCK_DEACTIVE "
Click to expand...
Click to collapse
Hi,
It's showing "SIMLOCK_DEACTIVE" .
Ok is your Kuwaiti sim still working on it?
ranajii said:
Ok is your Kuwaiti sim still working on it?
Click to expand...
Click to collapse
Currently my brother is using that SIM in Kuwait. Hence unable to check it.
zaabolla said:
ok, to remove doubts, type this code in phone dialer ( * # * # 2846579 # * # * )
now you are in "ProjectMenu"
choose n°3 ( Network information Query )
now choose n°2 ( Sim Lock info )
if the phone is locked you will see " SIMLOCK_ACTIVE "
if not locked you see " SIMLOCK_DEACTIVE "
Click to expand...
Click to collapse
Hi,
It's showing "SIMLOCK_DEACTIVE" .
RAJEEV A said:
Hi,
It's showing "SIMLOCK_DEACTIVE" .
Click to expand...
Click to collapse
can you post screen shot of mobile info pages?
ranajii said:
can you post screen shot of mobile info pages?
Click to expand...
Click to collapse
Hi,
Please find the attached snapshots.
You can flash B853 directly, try it
By force update ( 3 bottons )
May be it resolve the problem