[Q] software or motherboard - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

MY device shows it is loaded but not of course the good batteries and a good charger - I changed
Kernel and Rom I made two auto WIPE before installing and i saw that he does all the WIPE --- I bought from EBAY NEW USB and opened the device and I installed it but did not help
However the question of software problem??? How do you know with that motherboard?.??
I plug it into the computer and can be used as a USB flash disk
And it shows that the loading but not loader
philz touch 5
cwm base 6.0.3.1
I work with kernel version 3.0.31 -1103517
se .infra @ sep-126 # 3 smp preempt mon apr 1 \ kst 2013
pristine jb all lanuages ​​v 4.0 slim
baseband verision-- n7000xxlso
ios --4.1.2

Related

TOTAL RECALL not working on SAMSUNG GT-N7000

Hi there,
I am wondering, can anyone of you please guide how to install total recall in correct way, so that i can work.
My device is ROOTED .
While installing directly, it does not record any call. it records only from dictaphone with a very poor quality.
I have rooted my device for total recall only.
When i install from external storage ( by pressing vol. up + menu + power) it gives error message " invalid signature ".
Details:
Model: GT-N7000
Android Version: 4.1.2 (latest)
Baseband Version: N7000DDLS6
Kernel Version: 3.0.31 - 906407
[email protected]#3
SMP PREEMPT
Build Number: JZO54K.N7000DDLSC
creativemunky said:
hi there,
i am wondering, can anyone of you please guide how to install total recall in correct way, so that i can work.
My device is rooted .
While installing directly, it does not record any call. It records only from dictaphone with a very poor quality.
I have rooted my device for total recall only.
When i install from external storage ( by pressing vol. Up + menu + power) it gives error message " invalid signature ".
Details:
Model: Gt-n7000
android version: 4.1.2 (latest)
baseband version: N7000ddls6
kernel version: 3.0.31 - 906407
[email protected]#3
smp preempt
build number: Jzo54k.n7000ddlsc
Click to expand...
Click to collapse
try in call recorder

[HELP] Impossible to change for any ROM

Hi,
Root was OK, I have found 2 Kernels by PhilZ adapted to my actual ROM. I did the 3 wipes, then when I start ROM installation (with CWM 5 or 6), my Galaxy note Reboots after 2 or 3 minutes... I did it with 3 diffrent custom JellyBeans ROMs
I have my galaxy note since 2011, it was Gingerbread, I succeed ICS installation (official update)
I also tryed to do Format System (in mount & storage menu of CWM), but that reboot after 2 or 3 minutes...
Moreover, when I start my Galaxy note in Recovery mode (CWM), even if I don't touch it, it reboots after 2 or 3 minutes !
Have you already seen this kind of issue ? How to fix it ?
My actual config :
Samsung Galaxy Note [N7000]
Version Androïd : 4.0.4
Version Bande de Base : N7000XXLRB
Version Kernel : 3.0.15-N7000XXLRI-CL811902 [email protected] #3
Numéro de version : IMM76D.XXLRI
Thanks in advance.
Try to install a stock Rom with PC Odin in download mode. See here for instructions.
After that you'll know if your device is bricked or ok.

[Q] Can I format/wipe?

Not sure if the brick bug still applies to JB.
I inherited this phone from a friend and want to format data/wipe/reset it.
I used the "got brickbug?" app to check if my eMMC chip was vulnerable and it is (Type: VYL00M).
Model Number: GT-N7000
Android Version: 4.1.2
Baseband Version: N7000XXLT3
Kernel Version: 3.0.31-1103517, [email protected] #3, SMP PEEMT Mon Apr 1 21:33:52 KST 2013
Build Number: JZO54K.N7000XXLT4
Is it safe to boot in recovery and wipe data/factory reset? If not, what is an alternative "safe" method I can use?
Help (or redirection) would be appreciated!
There have been no cases of a brick bug on JB so I would say it is safe... however if you want to be sure then flash Philz kernel (got to the original android development) and flash it through recovery. After that you will have a safe kernel and a custom recovery.
If You want to be sure flash from stock recovery a Philz Kernel. You can put the file zip into your sdcard than go into recovery and flash it.
:good:

Error in /sdcard/cm-11 Status 7

I have a rooted N7000 with 4.0.4 on it.
This are my info:
GT=N7000
4.0.4
N7000JKLP2
3.0.15-1091908
[email protected] #3
SMP PREEMPT Tue Sep 18 20:00:33 EEST 2012
IMM76D.JKLP8
Im trying to install CM 11 via PhilZ and CWM and it gives me an error while installing, something with metadata recursive, status 7...
Anyway, I figured I should install the CWM from Odin, can anyone tell me which one to download?
If you currently have Philz kernel then download for example Raw Kernel (any version) and flash it through recovery. You won't be able to boot into your old ICS after this but you can flash straight to CM 11 with Raw. Don't forget to do a full wipe though.
Bei60 said:
I have a rooted N7000 with 4.0.4 on it.
This are my info:
GT=N7000
4.0.4
N7000JKLP2
3.0.15-1091908
[email protected] #3
SMP PREEMPT Tue Sep 18 20:00:33 EEST 2012
IMM76D.JKLP8
Im trying to install CM 11 via PhilZ and CWM and it gives me an error while installing, something with metadata recursive, status 7...
Anyway, I figured I should install the CWM from Odin, can anyone tell me which one to download?
Click to expand...
Click to collapse
I believe error 7 often indicates youre using an old/incompatible recovery-version.
Try updating that first. (install a different kernel..)

back to old kernel

Hey guys so I installed Speedmod and now I want my old, stock kernel.
I have no idea what should I download, and how to flash. can anyoe help?
This is my info:
GT-N7000
4.0.4
N7000JKLP2
3.0.15
[email protected] #k3-15
SMP PREEMPT Fri Oct 26 20:22:16 SGT 2012
IMM76D.JKLP8
Thanks.
The rom you are on is not safe with the stock kernel. Speedmod is safe. Why do you want to go back to stock kernel? If still you want to revert, then flash the ICS rom agian, or extract the zimage from the rom file and use the rom updater zip and replace the zimage (like speedmod zip) and flash..

Categories

Resources