Related
Has anyone found a way to disable system write protections? Trying to put a new boot animation in. I'm running OMJ's rom and yes I tried vipers system write protection disabler but it broke my wifi and its the wrong firmware.
S-OFF?
tbraidz said:
Has anyone found a way to disable system write protections? Trying to put a new boot animation in. I'm running OMJ's rom and yes I tried vipers system write protection disabler but it broke my wifi and its the wrong firmware.
Click to expand...
Click to collapse
You need to look at S-OFF. Vipers' solution isn't really a substitute. If you're on the newest bootloader you may be hosed though on that front.
bigdaddy619 said:
S-OFF?
Click to expand...
Click to collapse
Rirere said:
You need to look at S-OFF. Vipers' solution isn't really a substitute. If you're on the newest bootloader you may be hosed though on that front.
Click to expand...
Click to collapse
I am s-off. But I can't edit system files?
One way that's sort of worked for me is to prime the stock rom with whatever I wanted beforehand. For example, I deleted the Sprint bloat from the stock rooted rom before flashing so that they never actually get installed. You could do the same with a boot animation.
tbraidz said:
I am s-off. But I can't edit system files?
Click to expand...
Click to collapse
you should be able to....what are you editing & how?
O.M.J said:
you should be able to....what are you editing & how?
Click to expand...
Click to collapse
True, I'm probably doing it wrong. I'm trying to change my boot animation. So I have the zip (nonflashable) on a usb connected with an OTG cable and I'm trying to replace the old animation with this one.
Ok figured it out. Used FX instead of ES and it worked -_-. I feel stupid.
New question. If I don't like the current bootdown can I just delete it with no problems?
Thanks for all the help
tbraidz said:
True, I'm probably doing it wrong. I'm trying to change my boot animation. So I have the zip (nonflashable) on a usb connected with an OTG cable and I'm trying to replace the old animation with this one.
Ok figured it out. Used FX instead of ES and it worked -_-. I feel stupid.
New question. If I don't like the current bootdown can I just delete it with no problems?
Thanks for all the help
Click to expand...
Click to collapse
yeah, you should be able to delete ok....worse case, you add it back
i ahve tried to install a custom rom but it didnt flash properly, and i tried to do a restore of my stock rom but its not on my phone anymore all i can do is put the phone into bootloader and recovery, i have my stock rom backed up on my pc, but i cant find a way of getting my pc to recognise the phone to enable me to get the stock rom installed, my 400pound htc one might as well be a paperweight at this rate!!
surly there is a way i can get acess to the internal sd card??
Search for: adb sideload
BenPope said:
Search for: adb sideload
Click to expand...
Click to collapse
will that work even tho i only have acess to boot loader and recovery?
also will i loose root?
nottys4 said:
will that work even tho i only have acess to boot loader and recovery?
also will i loose root?
Click to expand...
Click to collapse
It depends on the recovery, but it works in TWRP.
It is the ROM that is rooted, so if you sideload a non-rooted ROM and flash it, you will lose root. It seems you don't have a working ROM, so you don't "have" root.
BenPope said:
It depends on the recovery, but it works in TWRP.
It is the ROM that is rooted, so if you sideload a non-rooted ROM and flash it, you will lose root. It seems you don't have a working ROM, so you don't "have" root.
Click to expand...
Click to collapse
i had root and a custom rom on my phone but i reflashed a differnt rom and it wouldnt load only to realise i didnt have the working rom on my phone, ive tried adb side load and its not working, i followed the tutorial step by step???
any suggestions
nottys4 said:
i had root and a custom rom on my phone but i reflashed a differnt rom and it wouldnt load only to realise i didnt have the working rom on my phone, ive tried adb side load and its not working, i followed the tutorial step by step???
any suggestions
Click to expand...
Click to collapse
Let me correct you. You had a custom ROM that was rooted.
My suggestion is to fix the problem.
I can't help you because:
1) I don't know what recovery you have
2) I don't know what tutorial you followed
3) I don't know in which way it is "not working"
I suggest you flash TWRP 2.6.3.4 and use adb sideload.
BenPope said:
Let me correct you. You had a custom ROM that was rooted.
My suggestion is to fix the problem.
I can't help you because:
1) I don't know what recovery you have
2) I don't know what tutorial you followed
3) I don't know in which way it is "not working"
I suggest you flash TWRP 2.6.3.4 and use adb sideload.
Click to expand...
Click to collapse
i have twrp 2.6.3.3
http://forum.xda-developers.com/showthread.php?t=2559200
thats the tutorial
it wont load any rom says it cant read the rom
Post your commands which you used to copy files
sent from my mobile device
SaHiLzZ said:
Post your commands which you used to copy files
sent from my mobile device
Click to expand...
Click to collapse
all the commands that i sent are in the tutoruial that i shared
Get hold of a OTG cable. Put the ROM from the PC onto a USB stick and then flash it through your recovery using the OTG cable
Sent from my Nexus 7 using XDA Premium HD app
bored_stupid said:
Get hold of a OTG cable. Put the ROM from the PC onto a USB stick and then flash it through your recovery using the OTG cable
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
fanstastic idea but i need my phone to be able to boot back up to install super su and it cant because i dont have a rom installed on it, any idea of where i can get a stock unrooted rom from my m7 international?
i am completly stuck!!!!! is someone willing to connect to me via skype and help me out as i need my phone bacl on asap and dont know how to do it!!!
nottys4 said:
i am completly stuck!!!!! is someone willing to connect to me via skype and help me out as i need my phone bacl on asap and dont know how to do it!!!
Click to expand...
Click to collapse
You need to get adb working on your PC or you could try what bored_stupid is suggesting. You are a long why from requiring supersu at this point.
mb_guy said:
You need to get adb working on your PC or you could try what bored_stupid is suggesting. You are a long why from requiring supersu at this point.
Click to expand...
Click to collapse
are you able to have a chat with me on skype please and explain this in more detail, i've done so much in the past few days i dont even know where i am anymore
nottys4 said:
i had root and a custom rom on my phone but i reflashed a differnt rom and it wouldnt load only to realise i didnt have the working rom on my phone, ive tried adb side load and its not working, i followed the tutorial step by step???
Click to expand...
Click to collapse
Try to be more precise! Which rom are your trying to flash? Give a link!
nottys4 said:
all the commands that i sent are in the tutoruial that i shared
Click to expand...
Click to collapse
If you have posted a screenshot of your cmd prompt maybe we could pinpoint why its failing.
nottys4 said:
fanstastic idea but i need my phone to be able to boot back up to install super su and it cant because i dont have a rom installed on it, any idea of where i can get a stock unrooted rom from my m7 international?
Click to expand...
Click to collapse
You don't even have a working rom so why are you still talking about root??? You don't need root to use a usb otg cable to flash a rom.
Make sure you have the latest android sdk installed on your computer and latest htc drivers.
Post the output of fastboot getvar all minus imei/sn
alray said:
Try to be more precise! Which rom are your trying to flash? Give a link!
If you have posted a screenshot of your cmd prompt maybe we could pinpoint why its failing.
You don't even have a working rom so why are you still talking about root??? You don't need root to use a usb otg cable to flash a rom.
Make sure you have the latest android sdk installed on your computer and latest htc drivers.
Post the output of fastboot getvar all minus imei/sn
Click to expand...
Click to collapse
many thanks guys for your help i managed to get my phone back online again!! but i now have another problem...
hi there after completely messing my phone up i managed to get this rom back on and working!! but my phone gives this error message:
There was a problem communicating with google servers.
try again later.
does anyone know why this is??
anybody else having issues with thier google account??
nottys4 said:
anybody else having issues with thier google account??
Click to expand...
Click to collapse
It is problem globally! Google is experiencing major error with sync servers.
or try this: go to accounts.google.com and in security (left panel) go to the list of 3rd party applications that are using your Google credentials and start revoking the applications that you no longer use.
Softor4pda said:
It is problem globally! Google is experiencing major error with sync servers.
Click to expand...
Click to collapse
bugger!!! i really wanna get my phone set up too, any ideas of how long they will be down?
What kernel supports BLN and usb OTG and works on stock rom?
Kobro said:
What kernel supports BLN and usb OTG and works on stock rom?
Click to expand...
Click to collapse
none
search would have shown you this
Kobro said:
What kernel supports BLN and usb OTG and works on stock rom?
Click to expand...
Click to collapse
none
efaustino84 said:
none
search would have shown you this
Click to expand...
Click to collapse
i did try searching, i did not find anything so i asked to make sure.
nope. nope. nope. nope. even hard developement in cm11(novafusion) its kind of buggy.
you can use otg transfer files plug mouse/keyboard/gamepad. but when you unplug it. phone thinks its charging something. you need to reboot phone everytime.
factorexh said:
nope. nope. nope. nope. even hard developement in cm11(novafusion) its kind of buggy.
you can use otg transfer files plug mouse/keyboard/gamepad. but when you unplug it. phone thinks its charging something. you need to reboot phone everytime.
Click to expand...
Click to collapse
i dont use otg so often, ad even if i do start, a reboot only takes, what, a minute?
Kobro said:
i dont use otg so often, ad even if i do start, a reboot only takes, what, a minute?
Click to expand...
Click to collapse
not a massive headache. just reboot after unplug otg features works well.
Hi guys i flashed a rom of Mokee (For mb886 but date after 01/07), I ignore the status 7 error on recovery using notepad++ and modifying the script file (my whole fault). So i flashed the rom and doesn't work so i restore a nandroid backup and when i connect my phone to pc or CA it doesn't work, no charge, no storage mode, nothing. So, what can i do to fix this issue? hope can u help me guys, i'm afraid of this Sorry for my bad english.
Is the phone recognized in fastboot mode? If it is, you can try and flash a stock ATT, Bell, or Mex Retail ROM.
audit13 said:
Is the phone recognized in fastboot mode? If it is, you can try and flash a stock ATT, Bell, or Mex Retail ROM.
Click to expand...
Click to collapse
Hi, yes it is recognized, you mean with RSD Lite?
You can use Myth Tools or RSD lite.
audit13 said:
You can use Myth Tools or RSD lite.
Click to expand...
Click to collapse
Thanks man, I'll try
Any luck?
audit13 said:
Any luck?
Click to expand...
Click to collapse
I have not tried yet, but when I do, I tell you
audit13 said:
Any luck?
Click to expand...
Click to collapse
Tried with RSD but still doesn't work
ErickST18 said:
Tried with RSD but still doesn't work
Click to expand...
Click to collapse
You mean RSD Lite didn't install the ROM or you installed the ROM and USB port still doesn't work?
audit13 said:
You mean RSD Lite didn't install the ROM or you installed the ROM and USB port still doesn't work?
Click to expand...
Click to collapse
I installed the ROM with RSD Lite but usb port still doesn't work :S ... Would Myth tools make any difference?
ErickST18 said:
I installed the ROM with RSD Lite but usb port still doesn't work :S ... Would Myth tools make any difference?
Click to expand...
Click to collapse
No Myth shouldn't make any difference.
Which stock ROM did you install? If you installed the ATT, you could try the Mexico Retail or Bell too.
audit13 said:
No Myth shouldn't make any difference.
Which stock ROM did you install? If you installed the ATT, you could try the Mexico Retail or Bell too.
Click to expand...
Click to collapse
Only tried with ATT and Bell, no sucess
ErickST18 said:
Only tried with ATT and Bell, no sucess
Click to expand...
Click to collapse
The ROM boots? So you can charge it with a wall charger but not your computer, right?
It's strange because it works to transfer data.
audit13 said:
The ROM boots? So you can charge it with a wall charger but not your computer, right?
It's strange because it works to transfer data.
Click to expand...
Click to collapse
yep, the ROM boots, but no, neither wall charger works. No AC, no data transfer, no charge with pc. Nothing seems to work with it, i'm getting crazy. The only thing that works is run into fastboot and pc recognize it as fastboot mode.
ErickST18 said:
yep, the ROM boots, but no, neither wall charger works. No AC, no data transfer, no charge with pc. Nothing seems to work with it, i'm getting crazy. The only thing that works is run into fastboot and pc recognize it as fastboot mode.
Click to expand...
Click to collapse
After flashing a stock ROM, try flashing the latest version of CWM and see what happens.
I used RSD to flash back to stock Bell ROM and it would always hang at the Motorola logo. Once I flashed the latest CWM, the phone started to work. Maybe CWM will help in your situation too.
audit13 said:
After flashing a stock ROM, try flashing the latest version of CWM and see what happens.
I used RSD to flash back to stock Bell ROM and it would always hang at the Motorola logo. Once I flashed the latest CWM, the phone started to work. Maybe CWM will help in your situation too.
Click to expand...
Click to collapse
I will try, i hope so... Thanks for your time bro, i'll notice you once installed cwm.
q
ErickST18 said:
Hi guys i flashed a rom of Mokee (For mb886 but date after 01/07), I ignore the status 7 error on recovery using notepad++ and modifying the script file (my whole fault). So i flashed the rom and doesn't work so i restore a nandroid backup and when i connect my phone to pc or CA it doesn't work, no charge, no storage mode, nothing. So, what can i do to fix this issue? hope can u help me guys, i'm afraid of this Sorry for my bad english.
Click to expand...
Click to collapse
Your fault repaired yet，i have the same trouble.can you help me
acecombat3 said:
Your fault repaired yet，i have the same trouble.can you help me
Click to expand...
Click to collapse
yes, i've repaired this problem. I made a backup of all blocks partitions from another Atrix HD and restore this backup on my device and this solve the issue
ErickST18 said:
yes, i've repaired this problem. I made a backup of all blocks partitions from another Atrix HD and restore this backup on my device and this solve the issue
Click to expand...
Click to collapse
Do you used recovery restored? can you send the backup to me? thank you.
[email protected]
or upload skydivce and tell me the link
acecombat3 said:
Do you used recovery restored? can you send the backup to me? thank you.
[email protected]
or upload skydivce and tell me the link
Click to expand...
Click to collapse
Sure bro, as soon as i can i will upload it and tell you how to do it. I'm on work right now. Glad to help
Hey there,
the USB port on my Note8 ist broken it doesnt recognize any sort of connection - with that working it wouldnt be a hassle for me to get back to stock
Someone recommended me to try flashfire, but im scared of bricking the device with this method since the latest version is from 2017
Is this really the only way it could work or is it possible to work with odin over wifi?
Greetings
Shurkien said:
Hey there,
the USB port on my Note8 ist broken it doesnt recognize any sort of connection - with that working it wouldnt be a hassle for me to get back to stock
Someone recommended me to try flashfire, but im scared of bricking the device with this method since the latest version is from 2017
Is this really the only way it could work or is it possible to work with odin over wifi?
Greetings
Click to expand...
Click to collapse
Is your device rooted? Flash fire you have to be rooted. And haven’t messed with flashfire in years. So I would doubt it would work.
But yes your gonna need a working USB port to flash it back to stock there’s really no other way if flashfire is not an option.
Sent from my iPhone using Tapatalk
hyelton said:
Is your device rooted? Flash fire you have to be rooted. And haven’t messed with flashfire in years. So I would doubt it would work.
But yes your gonna need a working USB port to flash it back to stock there’s really no other way if flashfire is not an option.
Click to expand...
Click to collapse
Twrp is an option if someone wrote a zip, not?
SnowFuhrer said:
Twrp is an option if someone wrote a zip, not?
Click to expand...
Click to collapse
Well that’s if there device was already rooted. Not possible if there not rooted
Sent from my iPhone using Tapatalk
My device has root and twrp.
But is there a zip?
I also posted in another forum (a german one) - and he said since I want to get back to stock bc of a warranty case I shouldnt bother me so much bc my hardware issues (broken usb / pixel errors) cannot be adressed to custom recovery / root