Related
How far is your Galaxy s stable?
mine just hits the 1.1GHZ, beyond that only crashes no matter which voltage i Use. please Use the poll so we have a good picture of what the average galaxy s is capable of..
also comment which version of SGS you are using and 8gb/ 16 Gb etc..
i9000m
PS this thread should be moved to General
had mine at 1.54ghz running MIUI with tk glitch kernel.
was amazingly fast, but my phone got hot quick, i dont like OC'ing i feel it may do more harm than good in the long run.
others may and will disagree but thats my opinion on it
Mine with 1.3GHz OC and some Undervolt is perfectly stable.....
simone201 said:
Mine with 1.3GHz OC and some Undervolt is perfectly stable.....
Click to expand...
Click to collapse
Agree with the chef ...
Although I can overclock to 1540MHz it does get hot and Im sure it will do damage in time ..
1300MHz is a great overclock ...
It will be interesting to see what my SGS 2 can be safely overclocked to
1.2 GHz seems ok for me - with UV
Doesn't really get hot.
Running mine @ 1440 MHz with MIUI but i think I can go higher if I want . I have the 8 GB version
1.3 and very stable and with great performance both q score caffiene mark and in daily use
Which voltage are you using?
Mine seems to freeze on voltages above the 1.3V,
above the 1.2 GHZ always freezes. I,m using darkeys 9.5 Rom.
someone some advice which rom is the best for OC, (just for benchmarking) for once.
rixsta said:
Agree with the chef ...
Although I can overclock to 1540MHz it does get hot and Im sure it will do damage in time ..
1300MHz is a great overclock ...
It will be interesting to see what my SGS 2 can be safely overclocked to
Click to expand...
Click to collapse
Mine can handle up to 1.3-1.4ghz
Im getting stable speeds of 1.7ghz. Im on watercooling though..
Sent from my GT-I9000 using XDA Premium App
1.4ghz is my max for full stability. 1.5ghz works fine (no reboots), but the CPU occasionally gives an invalid result during calculations, e.g. during benchmarks like linpack, results can sometimes be inaccurate; 1.44ghz also seemed to work, but I picked 1.4ghz max for longevity/reliability.
UV Values are:
100mhz - 200mV UV (750mV)
200mhz - 150mV UV (800mV)
400mhz - 100mV UV (950mV)
800mhz - 75mV UV (1125mV)
1ghz - 50mV UV (1200mV)
1.2ghz - 50mV UV (1300mV)
1.3ghz - 0mv UV (1400mV)
1.4ghz - 50mV UV (1400mV)
Max UV were found by starting from 100mhz Max frequency, decreasing UV until stable for 5 minutes of software decoding of 720p MKV, and then increasing Max frequency one step. Occasionally the previous step UV needed to be decreased by 25mV to obtain a stability at the next frequency step.
i9000M (16GB)
Guys, if you wanna push your phones to their full stability limits- play on Shadow Guardian game...)
Sent from my GT-I9000 using XDA App
I can run my SGS stable at 1540 MHz with glitch kernel in MIUI 1.5.20 ROM.
Total stability in a 48 hours stress test.
Enviado desde mi GT-I9000 usando XDA Premium App
Mine is stable at 1.5 Ghz with a 200mv undervolt, but only if I select it as a single frequency.
For multiple frequencies, I was stable at 1.4Ghz on an earlier kernel, but it's slightly unstable now... I'll probably try tweaking the governor.
I'm on a i9000m using tk-glitch's V9D-VC and CM7 #11 build.
By the way, shouldn't this thread be in general?
I am on MIUI v3 and CM7_SGSMTD_platypus-kernel_20110522_r0_quorra-prer11_test4-r2 kernel.
I don't use undervolt settings and 1.2 Ghz is fine for me; above values generally don't work stable.
By the way, 1.2 ghz is almost enough for all games and operations, I did not run into that pushing apps for high oc's.
Regards.
1.44GHz, extremely smooth and stable!
Never seen an option to go above 1.54, but 1.54 works flawlessly so I've chosen 1.5 in the poll. (16gb i9000)
1.3-1.4 GHz tkglitch kernel Miui v3
Sent from my GT-I9000 using XDA Premium App
It's not the ROm it's the KERNEL who can oc, i adviise using XAN, hardcore kernels in 2.2. or gto's ginger kernel at 2.3 they are stable and 1280 i guess it's the limit not to warm up
But a questin what send me an undervoltage config, to 1300 if the gpu games work for someone at 1300mhz
.
fstluxe said:
Which voltage are you using?
Mine seems to freeze on voltages above the 1.3V,
above the 1.2 GHZ always freezes. I,m using darkeys 9.5 Rom.
someone some advice which rom is the best for OC, (just for benchmarking) for once.
Click to expand...
Click to collapse
I've just flashed emanoN v3, it has No-Frills CPU control app by default, I used this app to set my CPU like this: Max 710Mhz, Min 245Mhz, Governor performance, I/O scheduler deadline --> Apply on Boot.
But is it me or it doesn't make any work on my Galaxy mini? I still get lag on many games like when not overclocked!
should i use chain fire 3D?
[Sorry 4 my bad English ]
Try other governors and reset your phone after making changes.
Khanate said:
Try other governors and reset your phone after making changes.
Click to expand...
Click to collapse
I did, but
should I use chainfire3d instead of NO-Frills ?
Chainfire 3D is graphics tool for better optimization of games and other 3D apps.
Did you check Apply on boot option?
as in my question: I checked Apply on boot option
If OC doesnt make any work on galaxymini, why did they add it in custom ROM 4 galaxymini?
Try other rom like CM 7.2 overclocking worked for me.
why doesn't the OC make any work on Noname ??!!
A tried over-clocking a couple of times but I really didn't feel the difference, except the battery drain, of course. Now-a-days, I don't even care to over-clock.
I am having my mini with cm7.1.0 music edition and overclocked it to 782 MHz and I find that in set CPU native benchmark I found that it took 900 micro second less when I clocked it to 782 MHz so I can say that Oct really works it also make my device run more smoothly its true that some games like angry birds lags yet after oc
boaxfux said:
A tried over-clocking a couple of times but I really didn't feel the difference, except the battery drain, of course. Now-a-days, I don't even care to over-clock.
Click to expand...
Click to collapse
maybe ur device has power enough to play many games that requires high-end hw, maybe not
but I wanna push my galaxy mini to play the effing awesome games just like the other high-end devices
dhlalit11 said:
I am having my mini with cm7.1.0 music edition and overclocked it to 782 MHz and I find that in set CPU native benchmark I found that it took 900 micro second less when I clocked it to 782 MHz so I can say that Oct really works it also make my device run more smoothly its true that some games like angry birds lags yet after oc
Click to expand...
Click to collapse
OC can improve device's performance, but that improvement was identified by ur own experiences or measurement software?
that's right, I've got lag in angry birds even after OC
my phone is OCed at 782mhz and it's lag free everything works flawlessly...
M1hai said:
my phone is OCed at 782mhz and it's lag free everything works flawlessly...
Click to expand...
Click to collapse
ur phone is Galaxy mini ?!
I also OC my CM7.0.2 RC2 with 782 OC kernel. Got 1837 score on Antutu Benchmark. Love it.
fueart said:
I also OC my CM7.0.2 RC2 with 782 OC kernel. Got 1837 score on Antutu Benchmark. Love it.
Click to expand...
Click to collapse
its really helps ur device improve its performance? did u check with some HD games?
kynam91 said:
its really helps ur device improve its performance? did u check with some HD games?
Click to expand...
Click to collapse
Many games are tailored towards devices with 1Ghz processors and newer (including dualcore and advanced GPU's like the Tegra2 and Exynos chipsets). Don't expect the latest games to run reliably on a sub-800Mhz singlecore device.
Apps that require Chainfire3D are unlikely to work very well at all on the SGM as they're generally aimed at the higher-performance devices.
If you want to see the difference an overclock makes, then run an AnTuTu CPU benchmark before & after overclocking. If the figure doesn't change much (You should expect an increase roughly relative to the % of the overclock) then something isn't working correctly.
I can play Need For Speed Shift without any lag
fueart said:
I can play Need For Speed Shift without any lag
Click to expand...
Click to collapse
lucky u! I wish I could
knightnz said:
Many games are tailored towards devices with 1Ghz processors and newer (including dualcore and advanced GPU's like the Tegra2 and Exynos chipsets). Don't expect the latest games to run reliably on a sub-800Mhz singlecore device.
Apps that require Chainfire3D are unlikely to work very well at all on the SGM as they're generally aimed at the higher-performance devices.
If you want to see the difference an overclock makes, then run an AnTuTu CPU benchmark before & after overclocking. If the figure doesn't change much (You should expect an increase roughly relative to the % of the overclock) then something isn't working correctly.
Click to expand...
Click to collapse
yup! I just expect the Oc makes change that I can feel thru my own experiences! I dont want to see a good result on Antutu then THINK my device has better performance!!! U know what I mean?
btw, just looked ur signature, u r a serious guy, arent u? haha! It's a cooler way (that's what they thought) to write, why so serious
We are lucky because s5570 is equipted with gpu. Why dont you try using cm7.2 oc with 782 kernel. Plus a2sd and v6 supercharger.
Sent from my GT-S5570 using XDA App
Hello guys,
I`ve been trying to find a way to have all 4 cpu cores online all the time to see if it helps playing games (lag) as I tested, for me every game lags when there is only 1 core running, than when the phone needs more power it turns on other cores and it lags, on that exact moment!
Trying Glowball, Tegra 3 game doesn`t lag because every core is on 100% of the time! And I`ve seen users saying that they don`t have lag on their phones because every core is active during gaming sessions, which is not my case.
I tried to use System Tuner Pro > Boot Settings > Force all CPUs online with no success and didn`t try CPU Editor as I don`t know how to install it.:silly:
If you have lags on gaming this might be a solution!
Does anyone know how to keep`em online all the time? 10H here.
Thanks for your help. :fingers-crossed:
gabrielgon said:
Hello guys,
I`ve been trying to find a way to have all 4 cpu cores online all the time to see if it helps playing games (lag) as I tested, for me every game lags when there is only 1 core running, than when the phone needs more power it turns on other cores and it lags, on that exact moment!
Trying Glowball, Tegra 3 game doesn`t lag because every core is on 100% of the time! And I`ve seen users saying that they don`t have lag on their phones because every core is active during gaming sessions, which is not my case.
I tried to use System Tuner Pro > Boot Settings > Force all CPUs online with no success and didn`t try CPU Editor as I don`t know how to install it.:silly:
If you have lags on gaming this might be a solution!
Does anyone know how to keep`em online all the time? 10H here.
Thanks for your help. :fingers-crossed:
Click to expand...
Click to collapse
Well Glowball doesnt lag because they optimized it for a tegra3 devices. so the problem is the game developer, not the phone as far as i know.
i dont know if what you want can be done.
profyler said:
Well Glowball doesnt lag because they optimized it for a tegra3 devices. so the problem is the game developer, not the phone as far as i know.
i dont know if what you want can be done.
Click to expand...
Click to collapse
Well, Shadowgun THD is in theory optimized and lags anyway. It`s just frustrating to have a quad-core high end phone that lags on so many games.
But thank you!
gabrielgon said:
Well, Shadowgun THD is in theory optimized and lags anyway. It`s just frustrating to have a quad-core high end phone that lags on so many games.
But thank you!
Click to expand...
Click to collapse
I am playing Shadowgun THD without lag I dont know why, But yes u are right about this problem.
I have tried playing most wanted It iagged but I noticed that the procesor speed are 520 mhz or such, and it makes problems,
So I put maximum 1500 MHz as minimum speed clock, but after playing more then 5 minutes processor speed was not more than 1000 MHz (even with root setup).
It turns that the problem is in the kernel, it is some sort of OVERHEATING protection.
But I am pretty sure that all 4 cores were active even the speeds didn't go more than 1000 MHz.
ljubisa_sk said:
I am playing Shadowgun THD without lag I dont know why, But yes u are right about this problem.
I have tried playing most wanted It iagged but I noticed that the procesor speed are 520 mhz or such, and it makes problems,
So I put maximum 1500 MHz as minimum speed clock, but after playing more then 5 minutes processor speed was not more than 1000 MHz (even with root setup).
It turns that the problem is in the kernel, it is some sort of OVERHEATING protection.
But I am pretty sure that all 4 cores were active even the speeds didn't go more than 1000 MHz.
Click to expand...
Click to collapse
its not a overheating problem. i play MW and theres is alwasy only 1 core at 1500MHZ at 95%. If the game could use the other cores, it wouldnt.
remember htc has exactly the same problem... its the developer fault coz there is apps and game optimized t use all cores when needed
This sucks right? If this could be done I`m quite sure that the lag problem would be solved or minimized greatly!
If anyone knows something about it please let us know!
Much appreciated.
First if you forced all the cores online ,, then you can use your phone for about 2 hours with overheat . So you will lose your battery .
and about the games it is a problem with our ''kernel'' ,, the kernel is controlling the cpu and the hardware . LG optimized the kernel for long battery use and if you noticed the cpu takes a long time to change the frequency . LG made the phone for daily use .
To test CPU use benchmark ,, not games , games are very complex application and maybe isn't compatible with tegra 3 .
Our phones have nearly the same Galaxy S3 benchmark scores .
And if you noticed our CPU is excellent with miltitasking
you can say our CPU has a hidden power .
Any custom kernel can solve this problems but we have a locked bootloader . So we should wait until JB which has unlocked bootloaders (as LG said)
Trust me, making an app that can even run on more than one thread is hard; very hard
Sent from my LG-P880 using xda app-developers app
gabrielgon said:
Well, Shadowgun THD is in theory optimized and lags anyway. It`s just frustrating to have a quad-core high end phone that lags on so many games.
But thank you!
Click to expand...
Click to collapse
never lags on when ive tried, the only game ive ever experienced lag on was when i first tried need for speed but now it doesnt seem to lag,
ljubisa_sk said:
I am playing Shadowgun THD without lag I dont know why, But yes u are right about this problem.
I have tried playing most wanted It iagged but I noticed that the procesor speed are 520 mhz or such, and it makes problems,
So I put maximum 1500 MHz as minimum speed clock, but after playing more then 5 minutes processor speed was not more than 1000 MHz (even with root setup).
It turns that the problem is in the kernel, it is some sort of OVERHEATING protection.
But I am pretty sure that all 4 cores were active even the speeds didn't go more than 1000 MHz.
Click to expand...
Click to collapse
i have that exact same problem and it IS caused by overheating..when temperature goes over 36c the max speed automatically resets to 1000mhz if the min speed was above..but when temperature is below most games work flawlessly
matatouille96 said:
i have that exact same problem and it IS caused by overheating..when temperature goes over 36c the max speed automatically resets to 1000mhz if the min speed was above..but when temperature is below most games work flawlessly
Click to expand...
Click to collapse
When playing dead trigger, mone will usually run 4cores 100% at 1500 until it reaches 42°
But I know that if, you play music it will keep at 1000 no matter what the temp is
Sent from my LG-P880 using xda app-developers app
gabrielgon said:
Hello guys,
I`ve been trying to find a way to have all 4 cpu cores online all the time to see if it helps playing games (lag) as I tested, for me every game lags when there is only 1 core running, than when the phone needs more power it turns on other cores and it lags, on that exact moment!
Trying Glowball, Tegra 3 game doesn`t lag because every core is on 100% of the time! And I`ve seen users saying that they don`t have lag on their phones because every core is active during gaming sessions, which is not my case.
I tried to use System Tuner Pro > Boot Settings > Force all CPUs online with no success and didn`t try CPU Editor as I don`t know how to install it.:silly:
If you have lags on gaming this might be a solution!
Does anyone know how to keep`em online all the time? 10H here.
Thanks for your help. :fingers-crossed:
Click to expand...
Click to collapse
I only faced game lag issue when my device is over heated or when playing multiplayer games (like SG DeadZone) with bad internet connection..never faced such issue due to CPU?
To overcome heat issue I have underclock max speed to 1.2ghz with CPU Tweak app..and it has helped a lot with over heating as well as battery life, and never faced any issue with lag even with 1.2ghz speed..
I have read in many place that even HTC One X behave similarly until JB updates arrived so you dont worry much even if some configuration or app in your device is creating game lags, it will be much better with new JB updates :fingers-crossed:
Quick note:
The Tegra 3 can run only in Single Core mode on 1.5GHz, in other words when your CPU reads 1.5GHz, only one CPU core is being utilised. If you actually want to use all 4 cores, you should set the max frequency to 1.4GHz to avoid the CPU clocking up to 1.5GHz. Lag is caused by switching between all 4 cores on 1.4GHz and single core on 1.5GHz.
I cannot set the max cpu speed. Tried different apps, iam on stock rom v10h, with root, new on p880
Sent from my LG-P880 using xda app-developers app
maus01 said:
I cannot set the max cpu speed. Tried different apps, iam on stock rom v10h, with root, new on p880
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Try this app:
http://forum.xda-developers.com/showthread.php?t=1854008
However, some users have reported bugs with this app so be careful.
Sent from my LG-P880 using Tapatalk 2
exFAT said:
Quick note:
The Tegra 3 can run only in Single Core mode on 1.5GHz, in other words when your CPU reads 1.5GHz, only one CPU core is being utilised. If you actually want to use all 4 cores, you should set the max frequency to 1.4GHz to avoid the CPU clocking up to 1.5GHz. Lag is caused by switching between all 4 cores on 1.4GHz and single core on 1.5GHz.
Click to expand...
Click to collapse
actually hardware wise tegra 3 is capable of running all 4 cores at 1.5ghz however almost all of current android app are not optimised for multicore cpu..however i have noticed when monitered using apps that it somerimes uses all 4 cores at 1.5ghz.
However its better this way if its not running all 4cores at full speed...infact i have underclocked mine to 1.2ghz this helps alot to over come heating issue as well as battery life and no issues with HD games :thumbup:
Sent from my LG-P880 using xda app-developers app
shazmekool said:
actually hardware wise tegra 3 is capable of running all 4 cores at 1.5ghz however almost all of current android app are not optimised for multicore cpu..however i have noticed when monitered using apps that it somerimes uses all 4 cores at 1.5ghz.
However its better this way if its not running all 4cores at full speed...infact i have underclocked mine to 1.2ghz this helps alot to over come heating issue as well as battery life and no issues with HD games :thumbup:
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
I'm referring to the Tegra 3 T30 present in our devices. The T33 in the HOX+ can run at 1.6GHz in quad core and 1.7GHz in single core. However, the T30 can only run at 1.5GHz single core and 1.4GHz quad core.
To cite Wikipedia,
Tegra 3 T30: 1.4 GHz Quad-core ARM Cortex-A9 (up to 1.5 GHz in single-core mode)
IIRC over at the HOX forums there was a thread on CPU management to prevent lag spikes in games when Tegra 3 switches from quad core 1.4GHz to 1.5GHz single core or something along the lines of that.
Sent from my LG-P880 using Tapatalk 2
This app is getting famous now, but in case you didn`t see, it`s called tegra overclock (not tegrak!) and it manages to force every core online pretty well. It has some good other features too.
It`s paid but it`s worth it.
not to mention it DOES improve your gaming experience.
quadcore tegra
gabrielgon said:
Hello guys,
I`ve been trying to find a way to have all 4 cpu cores online all the time to see if it helps playing games (lag) as I tested, for me every game lags when there is only 1 core running, than when the phone needs more power it turns on other cores and it lags, on that exact moment!
Trying Glowball, Tegra 3 game doesn`t lag because every core is on 100% of the time! And I`ve seen users saying that they don`t have lag on their phones because every core is active during gaming sessions, which is not my case.
I tried to use System Tuner Pro > Boot Settings > Force all CPUs online with no success and didn`t try CPU Editor as I don`t know how to install it.:silly:
If you have lags on gaming this might be a solution!
Does anyone know how to keep`em online all the time? 10H here.
Thanks for your help. :fingers-crossed:
Click to expand...
Click to collapse
try using tegra overclock. available in playstore. it works like a charm for me.
try using tegra overclock. it wkorks like a charm for me
Im using zaiben rom on my lg optimus 4x hd. The performance is poor. Overall laggy and horrible gaming. I dont like using non stock based rom as they always have some bugs. I tried custom kernel like iodak werewolf but it made my phone heat up like crazy and unusable while charging. Any solution?
Buy another device stock Roms won't give you a good performance increase.
Sent from my LG-P880 using XDA Premium 4 mobile app
I used stock with zaiben kernel for months, uninstalled all the useless system apps with Root Uninstaller, including hangouts, gmail, maps, youtube ... and then installed them again as normal applications and used the greenefy to hibernate most applications, never had a problem of lagg or excess heat. Now I'm testing some KK ROMs , and do the same thing using iodak kernel 9.95 and I'm liking the results.
Make a bakcup and test some KK ROMs.
sarnz said:
Im using zaiben rom on my lg optimus 4x hd. The performance is poor. Overall laggy and horrible gaming. I dont like using non stock based rom as they always have some bugs. I tried custom kernel like iodak werewolf but it made my phone heat up like crazy and unusable while charging. Any solution?
Click to expand...
Click to collapse
Believe me, if you're using an LG phone, custom ROMs are ALWAYS better.
Stock ROM got too many bugs and I don't really like modified stock ROMs as people usually add more bloatware.
You should really give CM11 a try.Latest nightlies got very good performance with iodak 9.5 kernel.And no important bugs you should worry about.
ottomanhero said:
Believe me, if you're using an LG phone, custom ROMs are ALWAYS better.
Stock ROM got too many bugs and I don't really like modified stock ROMs as people usually add more bloatware.
You should really give CM11 a try.Latest nightlies got very good performance with iodak 9.5 kernel.And no important bugs you should worry about.
Click to expand...
Click to collapse
If u use iodak or werwolf kernel wont phone heat up like crazy if u use ur phone or do some gaming especially. If u do it while phone is charging?
sarnz said:
If u use iodak or werwolf kernel wont phone heat up like crazy if u use ur phone or do some gaming especially. If u do it while phone is charging?
Click to expand...
Click to collapse
If you use a custom kernel like iodak or ww, you can tweak many parameters. Among them there is cpu clock frequency and voltage.
Personally, I've set the stock 1500 mhz frequency and undervolted Mpu and cpu respectively by -30 and -75 mV. My phone runs smooth as silk and never gets horribly hot.
The guys who replied before me are right, though, stock roms or their derivates cannot be compared with CM11 in terms of performance they are way better. If I were you, I would flash one of the latest nightly and a custom kernel.
After some trials and errors you will be able to find the correct balance between over/underclocking and undervolting.
That is, if you are willing of doing some experiments. If you are looking for pre-cooked solutions I am afraid you will be deceived.
Ottonet said:
If you use a custom kernel like iodak or ww, you can tweak many parameters. Among them there is cpu clock frequency and voltage.
Personally, I've set the stock 1500 mhz frequency and undervolted Mpu and cpu respectively by -30 and -75 mV. My phone runs smooth as silk and never gets horribly hot.
The guys who replied before me are right, though, stock roms or their derivates cannot be compared with CM11 in terms of performance they are way better. If I were you, I would flash one of the latest nightly and a custom kernel.
After some trials and errors you will be able to find the correct balance between over/underclocking and undervolting.
That is, if you are willing of doing some experiments. If you are looking for pre-cooked solutions I am afraid you will be deceived.
Click to expand...
Click to collapse
Tnx...which app do you. Use for undervolting and overclocking?
sarnz said:
Tnx...which app do you. Use for undervolting and overclocking?
Click to expand...
Click to collapse
Trickstermod is a favorite for most of the people.Check your tegra variant, if it's 1 or above, you can use -122mV for CPU with no problems, max freq set to 1.5 ghz
I'm using this for months now and I sometimes forget my phone can get hot, unless I do heavy gaming for 30 mins or more.
Also try to overclock GPU.Helps a lot with FPS issues.
If you want good battery life and decent performance, underclock to 1300 mhz and undervolt by -122mV (if your variant is 1 or above)
Btw you can check your variant via /sys/devices/system/cpu/cpu0/cpufreq/tegravariant after installing iodak kernel.Higher the variant, the higher you can overclock/undervolt.
@UP
My tegra variant is 3 o.o But when I undervolt 30mV on CPU and 75mV on MPU - as @peppethustra recommend in http://forum.xda-developers.com/showthread.php?t=2761923&page=2 - it causes freezes, even when I underclock to 1,3GHz :/
Artisto said:
@UP
My tegra variant is 3 o.o But when I undervolt 30mV on CPU and 75mV on MPU - as @peppethustra recommend in http://forum.xda-developers.com/showthread.php?t=2761923&page=2 - it causes freezes, even when I underclock to 1,3GHz :/
Click to expand...
Click to collapse
All phones are different you may have to tweak the values to fit your needs. Try upping the LP CPU voltage to -10 and work your way down. For MPU try -25 and work your way down on that as well.
Mine is a variant 2 and can use -20 and -110 with the 520 GPU overclock
Edit: also for more performance try changing your minfree values. Lower values mean better multitasking and high values mean more killing of background apps but more free ram for the foreground apps. I personally use 8, 12, 45, 65, 95, 165
don't forget to hit thanks!
Hello, as I mentioned I am facing low fps and poor performance in pubg and when I ran the geekbench test it games 1k in singlecore and 3k in multicore test. I am using stock oos oreo with blushark( I don't remember the name lol) kernal with unlocked bootloader. It also shows only 3 cores idk why, and the score is very low compared to other scores on browser.geekbench which shows 2k for single core and 5.5k for multicore. Please help!
I'll try to keep updating my research on this.
I did a hard reset and installed omni rom 8.1 which got me a 80% increase in single core benchmark (~1850) and 25% increase in multi core benchmark(~3925). Single core benchmarks are now around the same as of what others test results are showing in browser.geekbench, but multicore benchmark is still less. :/
Aah I settled on omni ROM 8.1 with caesium kernel and disabled touchboost and changed big cluster governer to ondemand from conservative. I now could play pubg smoothly on 1280x720p with high graphics and extreme fps thanks to gfx tool app before I couldn't even play the game with so smooth graphics and 956x500 blah blah resolution. I noticed the CPU would throttle down and reduce the frequencies for big cluster to like ~1530mhz and little to ~1350 MHz but the gameplay was good.
Assassin P780 said:
I'll try to keep updating my research on this.
I did a hard reset and installed omni rom 8.1 which got me a 80% increase in single core benchmark (~1850) and 25% increase in multi core benchmark(~3925). Single core benchmarks are now around the same as of what others test results are showing in browser.geekbench, but multicore benchmark is still less. :/
Click to expand...
Click to collapse
Stock kernel will give you the best results IMO. Try the Bane kernel, is good too
nickpapeir said:
Stock kernel will give you the best results IMO. Try the Bane kernel, is good too
Click to expand...
Click to collapse
Will try that too! Thanks!
The stock kernel gave me the above result 1850 singlecore and 3900 for multicore and after caesium kernel I got 4050 in multicore and 1650 in single core. But I don't how to go back to stock kernel without reinstalling the rom :/
Assassin P780 said:
... But I don't how to go back to stock kernel without reinstalling the rom :/
Click to expand...
Click to collapse
Use a file manager, such as Solid Explorer, to copy boot.img from the ROM zip file and flash it in TWRP by selecting Image in the install option.
Sent from my OnePlus 3T using XDA Labs
Thanks to BillGross
I am back on the stock kernel of omni rom 8.1 which gives me a average score of 1900 in single core and 3900 in multicore tests and pubg runs great on hdr 720p 60fps although it doesn't run at full 60 fps and there are some stutters here and there but gameplay is very good.
Simple fact: oos sucks except its face unlock.