Related
i dont like to use touch flo and would like to know if someone has found a way to disable it ?
thanks, eric
their is touchflo option in settings (under system I think), should allow you to disable it
Go to the the TODAY settings...
From the Today Screen:
1. Go to SETTINGS
2. Select TODAY icon
3. Select ITEMS tab (at the bottom)
4. UNCHECK the "HTC Home" item
5. Click OK and go back to the Today Screen
It should be gone!
TEC
the touchflo (finger panning) option is the one i want to turn off.
i still want to keep the htc home in my today screen.
aaronsmckee said:
their is touchflo option in settings (under system I think), should allow you to disable it
Click to expand...
Click to collapse
there is only one checked box about the sound on/off when panning. no where to disable it.
I'd love to turn touchflo off. It seems pretty worthless. It scrolls a page to slowly and in PIE its hard to get it to stop when u get to a spot you want to view.
technillion said:
From the Today Screen:
1. Go to SETTINGS
2. Select TODAY icon
3. Select ITEMS tab (at the bottom)
4. UNCHECK the "HTC Home" item
5. Click OK and go back to the Today Screen
It should be gone!
TEC
Click to expand...
Click to collapse
I had followed above with soft reset also, but still the "touch flo" function running in PIE. This is pretty annoying and useless function if you used to your finger scrolling webpages with PIE plus.
Another one can helps..Thank.
Try changing HKLM\Software\OEM\TFLOSettings\EnableScroll to 0 then reboot.
I haven't tried it yet.
Jason Lee said:
Try changing HKLM\Software\OEM\TFLOSettings\EnableScroll to 0 then reboot.
I haven't tried it yet.
Click to expand...
Click to collapse
That worked perfect neighbor. The touchflo scrolling made it near impossible to drag separator lines. I greatly prefer to tap in the scroll-bar field to page up/down. Thanks again.
jamespaulritter said:
That worked perfect neighbor. The touchflo scrolling made it near impossible to drag separator lines. I greatly prefer to tap in the scroll-bar field to page up/down. Thanks again.
Click to expand...
Click to collapse
Out of curiosity does that change also speed up PIE scrolling the normal way ? - cos it's super laggy and worse than TyTn in the out of the box setup.
Mike
Well if i hold my finger in the scroll bar field it will page up/down at 4 pages a second. The reg edit doesn't seem to have changed anything other than the touchflo scrolling
TouchFlO Scrolling and Sound
A Couple questions here:
Is there a way to tweak touchflo scrolling such that it only goes one page length at a time, instead of 4 or 5?
Is there away to turn of the clicking sound as it scrolls?
I'm assuming these are just annoyances of an immature feature that was rushed out the door, but hoping there are fixes available or that HTC is smart enough to fix the problems in future releases.
MardiG said:
A Couple questions here:
Is there a way to tweak touchflo scrolling such that it only goes one page length at a time, instead of 4 or 5?
Is there away to turn of the clicking sound as it scrolls?
I'm assuming these are just annoyances of an immature feature that was rushed out the door, but hoping there are fixes available or that HTC is smart enough to fix the problems in future releases.
Click to expand...
Click to collapse
Have you even looked at the settings in your tilt\Kaiser? you would have found atleast on answer to your questions just by looking around and learning your device!
I guess to each his/her own, but I personally think the TouchFLO interface is a huge improvement in usability. Perhaps it just takes some getting used to. And with TouchFLO, you can still essentially do all the things you could without TouchFLO. E.g. the scroll bars are still there to be used if you like that. And you can still use the stylus for normal operations. There seems to be some confusion about how it works so let me explain the "use cases".
The way TouchFLO works is this:
- use a finger (not your fingernail) to "drag" the screen up/down (or even left/right if the page is wider than the screen). The page should drag with your finger. It's semi-smooth. Not truly smooth, but smooth enough. When you drag, DON'T lift your finger from the screen till you've got it positioned to your desired spot.
OR
- If you use your finger (not your fingernail) to swipe up or down AND LIFT your finger fromthe screen as you do it, then the screen with scroll by itself to the end in that direction or until you tap the screen again to stop it.
OR
- if you use the stylus or your fingernail, then it will NOT scroll like above. It will then behave like a normal stylus control (highlites and selects instead of scrolling).
So, the screen reads a broad touch (like your finger) differently than a narrow/pinpoint touch (like your nail or stylus).
once I got used to it, i found it to be an excellent upgrade in the interface. I don't think it was a "feature that was rushed out the door" at all. in fact that it reads the stylus and your finger differently speaks to the idea that thought went into it.
Use it on a web page to see the different use cases. If you browse a PDF file, it'll drag even with a stylus because you can't "highlight and select" within a PDF file, so it knows that use case is invalid.
Also, You can change the sensitivity by using a reg tweak: HKLM-DRIVERS-TOUCHPANEL-PRESSURE THRESHOLD. Increase/decrease it for more/less sensitivity.
technillion said:
From the Today Screen:
1. Go to SETTINGS
2. Select TODAY icon
3. Select ITEMS tab (at the bottom)
4. UNCHECK the "HTC Home" item
5. Click OK and go back to the Today Screen
It should be gone!
TEC
Click to expand...
Click to collapse
You do realize this has nothing to do with TouchFlo ... right?
jomo25 said:
There seems to be some confusion about how it works so let me explain the "use cases".
Click to expand...
Click to collapse
Nice writeup, thanks!
Richard "Still Jonesing for a Tilt"
I wish there was a way to partially disable the Kaiser implementation of touchflo --specifically, the feature where if you drag scroll and your finger ends up at one of the edges of the screen (which is really easy on a 2.8" screen using your thumb) it goes into the continuous scrolling mode. I wish those edge regions of the screen were treated just like any other.
Jason Lee said:
Try changing HKLM\Software\OEM\TFLOSettings\EnableScroll to 0 then reboot.
I haven't tried it yet.
Click to expand...
Click to collapse
Thanks from me too for this tip. I don't use TouchFLO and I found the touchscreen on my TyTN II a bit annoying with this enabled. Sometimes it wouldn't react to tapping so I had to tap twice. This was maybe one out of every three or four taps.
Jason Lee said:
Try changing HKLM\Software\OEM\TFLOSettings\EnableScroll to 0 then reboot.
I haven't tried it yet.
Click to expand...
Click to collapse
didnt work for me, im using windows mobile 6.5, and its annoying to have the 6.5 scrolling and touchflo at the same time...
jonrulezz said:
didnt work for me, im using windows mobile 6.5, and its annoying to have the 6.5 scrolling and touchflo at the same time...
Click to expand...
Click to collapse
Please don't go digging in the graveyard, it disturbs the other corpses
Try going to settings>today>items>uncheck touchFlo
Hello everyone, i asked this question in the 'post your today screen' thread but got no answer so will try asking here:
I recently installed the htc home customiser and changed a few things around and generally had a play with it to see what i could create from my today screen. I then decided i was happy with how the original htc one looked so i changed it back. Unfortunately i have a slight problem.
Originally, under the htc home section i had tasks, appointments, tomtom, etc etc showin up and there was a scroll bar on the right hand side that allowed me to scroll down the list, all while keeping htc home in the same position at the top. Now though, i have a scroll bar that extends all the way up the right hand side of the screen whereas before it only went as far as the bottom of htc home. It now covers up part of the date and the sound settings button. When i scroll down my list of shortcuts, it now also scrolls htc home also. (i hope my description makes sense)
It is very annoying and also makes my home screen look ugly. Does anyone know how i can get it back to how it used to be?
thanks very much in advance!
You can fix this by updasting the registry directly. There may be another way, but off the top of my head, I don't know.
Check your entries under the registry item: HKLM/Software/Microsoft/Today/Items
Under there, you will see an entry for every Today plugin you have available in your Today settings window.
Select one and you see it has entries called:
- Enabled
- Flag
- Order
- Selectability
- Type
under each one.
- Enabled denotes if its checked for your Today screen (1 is on, 0 is off)
- Order denotes the sequence it is on the Today screen. The lower the number the higher on the screen, so usually, HTCHome is the lowest enabled since it at the top.
- Type denotes whether it is one that is "movable" or not.
Type is the one that you need to modify. Type can be 0 (moveable) or 5 (non-movable). Type 0 ones can be moved up and down in the Today settings screen, where as Type 5 ones cannot.
The issue is that if the Today screen content is too much to fit on the screen, it auto adds the scroll bar. BUT it will only make the part of the screen occupied by movable activated plugins scrollable.
Before you customized, it HTCHome was likely a Type 5, and it was Order 1 (or something low since its at top). And all others were Type 0. Thus the scrollable section DIDNT include the HTC Home. Somehow, your HTCHome type is now 0, so it is scrolling along with everything else.
Hope this helps. Of course, manually modifying the registry has inherent danges, so be careful, and I take no responsibility if you mess up (disclaimer ).
This might be configurable and modifiable via HTC HOME Customizer app itself, but not sure...I just know the above is how I would fix it if I needed to.
Cheers for that mate, i will have a look tomorrow and see if i can sort it out.
in the home customizer go to the "options" tab and check "Lock plugin on the today screen" ... this will solve your problem!
Today screen keeps scrolling up
I don't know if this is the right post to ask, but you guys seemed pretty knowledgeable about today screen...
What happens is that whenever I scroll down (with the scroll bar) my today screen, it keeps scrolling back up to beginning screen automatically.
Only way to avoid this is to scroll all the way to the bottom and then it stops there. Then I can scroll up to see my today plugins which are in the middle (e.g. if you can scroll 4 times down - 4 screens of plugins - and I want to see my plugins which are 1 screen down the initial today screen, I have to tap all the way down and then tap up 2 times to see the plugins I should have seen tapping just 1 time).
This is so annoying. I would appreciate any help. Thanks.
shogunmark said:
in the home customizer go to the "options" tab and check "Lock plugin on the today screen" ... this will solve your problem!
Click to expand...
Click to collapse
Hi:
This one didn't for me. The direct registry tweak did. Thanks to all you guys! xda rocks!!
shogunmark said:
in the home customizer go to the "options" tab and check "Lock plugin on the today screen" ... this will solve your problem!
Click to expand...
Click to collapse
Hi:
This didn't do it for me. The direct registry tweak did. Thanks to all you guys! xda rocks!!
This is for mbernstein:
You hijacked the thread but since the op had his issue resolved I can offer you just a little input. I had the same problem you mention. It started after I installed a few SPB programs. I'm not sure if it was the Pocket Plus, Mobile Shell, or something else but it was definately an SPB proggie. Once I uninstalled the programs the issue went away. I'm disappointed because they are good softwares.
Thanks. This should be the case. But it is a shame as Spb softs are quite good (otherwise).
Yes, I unchecked SPB today plugins and it took a long time (right one) for the screen to go "home". thanks.
I just noticed that the Windows icon on the upper left of my screen which opens the start menu, is cut off. Only the left half is visible and it makes it more difficult to tap to open since the icon width is half the original size. Is there a way to fix this?? BTW I did a search and there was no info available on this...
try schaps advanced config,if problems still happens then try hard resetting,you might need a different rom
bigboyhf said:
I just noticed that the Windows icon on the upper left of my screen which opens the start menu, is cut off. Only the left half is visible and it makes it more difficult to tap to open since the icon width is half the original size. Is there a way to fix this?? BTW I did a search and there was no info available on this...
Click to expand...
Click to collapse
This was an Issue on Dutty's April 1 Hybrid ROM. Did you look in there for solutions? I don't think there was. Was a bug in the Rom.
Thanks for responding. I was finally able to figure this one out. I opened WkTask from preferences and there is a setting for horizontal offset. I just increased the value in the box and it fixed it in "real time" ie as I increased the number the open program field moved to the right, uncovering the Windows icon and giving me improved access to tapping it to open the start menu. All is well!
Ok, first to the admins/moderators - I searched my ass off trying to find a thread with my problem, to no avail... so if there is one, please excuse me...
So here is my problem - I find it very difficult to scroll any list with my finger because I just end up selecting some item from the list... Is there any registry setting to, lets say, delay the select behavior of TouchFlo? I mean, for example, I try scrolling my contacts, I AM able to scroll but almost immediately after I start scrolling I end up selecting some contact!?! Am I the only one with that problem? PLEASE HELP!
Bump. Anyone?
I just have the problem the other way around, I just can't select multiple items because everything starts scrolling...
try scrolling with finger in more center of screen
selecting works if you scroll motion on left or right side usually
joshkoss said:
try scrolling with finger in more center of screen
selecting works if you scroll motion on left or right side usually
Click to expand...
Click to collapse
Also , make it more of a " flick " with your finger, instead of a touch and drag scroll.
So there's no registry setting? I have tried changing settings in HKLM\Software\OEM\TFLOSettings, HKLM\Software\HTC\HTCGesture, HKLM\Drivers\Touchpanel, HKLM\Software\HTC\TouchScroll... can't seem to make any difference!!! The screen becomes more responsive, scrolling is faster/slower, but no effect on my problem - whenever I try to scroll I always end up selecting... there HAS to be some setting that determines the delay from scrolling to selecting behavior... it works so well on the damn iPhone... also works beautifully on the S2U2 settings screen... they should fire all the idiots at HTC and hire the S2U2 guys to do their interface!!!
mmmfff said:
So there's no registry setting? I have tried changing settings in HKLM\Software\OEM\TFLOSettings, HKLM\Software\HTC\HTCGesture, HKLM\Drivers\Touchpanel, HKLM\Software\HTC\TouchScroll... can't seem to make any difference!!! The screen becomes more responsive, scrolling is faster/slower, but no effect on my problem - whenever I try to scroll I always end up selecting... there HAS to be some setting that determines the delay from scrolling to selecting behavior... it works so well on the damn iPhone... also works beautifully on the S2U2 settings screen... they should fire all the idiots at HTC and hire the S2U2 guys to do their interface!!!
Click to expand...
Click to collapse
u should blow up their forums then
Oh well, I guess I'll just wait till some genius dev out there finds out the right registry key, I give up
I hate to say this, but I think that is the expected behavior or TouchFlo scrolling.
You can drag to scroll specifically (and I don't believe this selects anything, at least on my Tilt), or you can swipe to start kinetic scrolling. If you click while kinetic scrolling is occurring, I think TouchFlo causes a selection to be made (although in places where single-click activate is the default, I don't think it actually activates the item--it simply highlights it).
You may be able to resolve this by changing the TFLOSettings\FingerPressure value.
I had a problem for the first six months with TouchFlo where the context menu would pop up about one in three times I tried to scroll (swiping or dragging). This happened even the moment I started using the device. Completely and utterly unusable. But after the third or so time I tried adjusting TFLOSettings values in the registry, I finally solved the problem. I ended up with TFLOSettings\FingerPressure=0x64 (100) and TouchPanel\PressureThreshold=0xC8 (200).
I REALLY wish HTC or someone would produce a complete guide to customizing TouchFlo scrolling (including the meanings of the TFLOSETTINGS values). It really works well, once it is optimized. Although, it will be great if Microsoft builds scrolling into the Common Controls in WM6.5.
mmmfff said:
Oh well, I guess I'll just wait till some genius dev out there finds out the right registry key, I give up
Click to expand...
Click to collapse
Actually there are genius developers in here. I think you're just being a little picky, the touch flo works fine for me.
I think I recall a touchflo sensitivity setting in KaiserTweak. Get it, then try setting the Touchflo sensitivity to the most sensitive option possible.
Dave
+1 on Kaisertweek, altho I reduced sensitivity instead of increasing it. Technique counts too. I tend to use nails or stylus for browsers, especially Opera. Use keyboard for contacts, and scrollwheel to dial it from there. Every phone is different, but reducing sensitivity via Kaisertweek worked for me.
Problem solved
Finally figured it out and now it works perfectly. The culprit was the too high value in HKLM\Drivers\Touchpanel\PressureThreshold.... I put a value of 160 (dword:000000a0) and now I have almost iPhone experience
heres a thread closer !
to bring some closure to this thread, the following utility will solve all your touchflo woes!!!
http://forum.xda-developers.com/showthread.php?t=499837
Hi,
I bought a Galaxy S 2 weeks ago,and noticed that in Web Browser,if i touch the screen and do a slide move from right to left or from left to right,i can't do a slide move from up to down of down to up(i dont pull my fingers off from the screen while doing the moves)
for example i opened a page from web browser and zoomed in..if i scroll the page from left to right,i cannot move the page upwards or downwards after that horizontal slide...(if i scroll from up to down-or down to up,i cannot move the page from left-to rigt or right to left too)(and my finger is still on the screen)
this bug happens in only straight way slide-scroll moves.the only way i can do a 360 degree move on a zoomed page is if i start the slide move in cross directions-not straight directions).then i can move the page where ever i want.
I tried this bug on stock 2,1 - 2,2 - 2.2.1 ROMs,on Darkys v5,5 - 5,6 Roms,on stock kernel,on voodoo kernel,on Stock Web browser and on Dolphin HD, i did cache - Data wipe factory reset sd format lots of times and the result is always the same.
Finally i went to shop to try a new Galaxy S to see if this bug happens to other phones,and Yes it happened to that new Galaxy S too.
A 50 € phone doesnt have this bug but a 500 € has it :/
Can anyone help me to solve this problem or know what cause this bug(or is it really a stock bug)?
anyone for help?
I don't know whether that is a bug or not. I know the behaviour you're describing and I see it as a feature. It allows for smoother vertical scrolling when reading long articles.
I wouldn't want this changed.
so does it lock itself to that direction we scroll-for a smoother scrooling,and not allow us to change to any other direction while our finger is still on the screen? :/
i scroll up the page,then if i want to slide the page through left a bit,i must pull off my finger from the screen first,and touch the screen again to slide left...
they could give smoothness with another way,if they do this on purpose for smooth scrolling :/
I'm more likely to scroll vertically reading a long web page than I am to be scrolling vertically and horizontally simultaneously.
Is it taking you much time or effort to lift your finger and press it back down?
npe,its just annoying for me,cant do a 360 degree move without pulling off my finger,if i do a vertical or horizontal slide before :/
thanks for answer