Database Develop

URGENT Please help:Unable to install Slim ics rom

Whenever i install the Slim ics from Cwm recovery, it just keeps going in a bootloop
I have no idea what i must do to fix this?
I have factory reset, cleared cache n dalvik
Pls help urgent
I come from the Aosp rom by bhuvan goyal.

try to install it again,if it doesn't work make a clean install by
flashing xxjvu>flash kernel supported cwm>wipe all>install ics slim
if it still doesn't work after you stuck in bootlogo,install ics slim again
hope it works

trustsyzaa said:
try to install it again,if it doesn't work make a clean install by
flashing xxjvu>flash kernel supported cwm>wipe all>install ics slim
if it still doesn't work after you stuck in bootlogo,install ics slim again
hope it works
Click to expand...
Click to collapse
Same bloody problem,bootloops like hell
Can you give a link for XXJVU so that i can install Ics after that
Any other assistance? common guys
ramu

darkkid85 said:
Same bloody problem,bootloops like hell
Can you give a link for XXJVU so that i can install Ics after that
Any other assistance? common guys
ramu
Click to expand...
Click to collapse
common guys i need assistance here
what is this forum for?

calm down and sorry dude i just woke up about a minute ago
here is a download link for xxjvu> http://www.filefactory.com/file/c306c7d/n/I9000XXJVU_I9000OXAJVU_OXA.rar
and root kernel>http://download.chainfire.eu/132/CF-Root/SGS/CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.zip
Faryaab said:
Instructions For Flashing Firmware:
Extract the firmware
Put your device into Download MODE
Start Odin
Click PDA and select CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.m d5
Click PHONE and select MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5
Click CSC and select GT-I9000-CSC-MULTI-OXAJVU.tar.md5
Then finally click START!
Instructions For Rooting JVU :
Extract the Rooted Kernel
Open Odin
Put your device into Download MODE
Click PDA and select CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.tar
Then finally click START!
Click to expand...
Click to collapse
Credit the download link and installation guide to faryaab and chainfire

When you get into bootloops, flash the kernel from the rom using heimdall and reflash rom in cwm

darkkid85 said:
Whenever i install the Slim ics from Cwm recovery, it just keeps going in a bootloop
I have no idea what i must do to fix this?
I have factory reset, cleared cache n dalvik
Pls help urgent
I come from the Aosp rom by bhuvan goyal.
Click to expand...
Click to collapse
Try, in cwm factory reset/wipe cache/wipe delvik/format system/format cache/format data data and flash 2.8 Essentials i9000 first then Base 2.8 (if bootloops pullout battery, put it back, enter recovery, reset, wipe, flash base again) and then Essentials again.

beardedwonder said:
When you get into bootloops, flash the kernel from the rom using heimdall and reflash rom in cwm
Click to expand...
Click to collapse
how do you do that? the rom is 1 zip file. do i extract it?

xSamuraix said:
how do you do that? the rom is 1 zip file. do i extract it?
Click to expand...
Click to collapse
Unzip it and then push the file zImage to your phone with Heimdall while in download mode.
On command line, it's:
heimdall flash --kernel zImage
There's probably a way to do it in the GUI, too.

CWM Restore

Hello!
I have installed Cocore kernell (8.2 and 8.6.4) a few times in my stock JB rom (LQL) but when I install CM 10.2 and if i need to go back to my stock rom i tried to restore my backup made it with the CWM that comes with cocore, it's pass without problems but when the rom start, stop a lot of process making impossible to work in it, and start in configuration wizard
someone have the same problem, there is a way to fix it?
Thanks in advance guys!!!

If you are on Android 4.3 after restoring your backup you need to reboot to recovery (recovery will change as you are on Cocore kernel) and then => format preload, then reboot, should work fine
Sent from Italy using Tapatalk

T.M. said:
someone have the same problem, there is a way to fix it?
Click to expand...
Click to collapse
From @Paul L. quote:
Paul L. said:
Format /preload as ext4
download the cocore TWRP kernel, install it, (re-)reboot to recovery, go to advanced (on TWRP, yes, it needs to be TWRP), terminal command, press enter (to select the directory to work from, which should be "/"), and run
make_ext4fs /dev/block/mmcblk0p9
(DANGER: IF YOU FORMAT WHATEVER ELSE IT MAY BRICK YOUR DEVICE, just check that our /dev/block/mmcblk0p9 is 0p9 at the end, it CAN'T BE ANYTHING ELSE.)
Then, go back and onto mount menu, and mount /preload partition. And then just install whatever ROM you want.
I am saying this because re-installing the stock ROM from ODIN can be dangerous if the power it's cut out or the USB is suddenly disconnected. Just format preload partition (there is nothing critical there, so it's safe, or safer than ODIN that's it)
Click to expand...
Click to collapse

R_a_z_v_a_n said:
From @Paul L. quote:
Click to expand...
Click to collapse
Yeah, I noticed it but it's actually not necessary
Sent from Italy using Tapatalk

Thanks mates!

Toni5830 said:
If you are on Android 4.3 after restoring your backup you need to reboot to recovery (recovery will change as you are on Cocore kernel) and then => format preload, then reboot, should work fine
Sent from Italy using Tapatalk
Click to expand...
Click to collapse
Is this valid for 4.4? thanks in advance and sorry my poor English:good:

raan4 said:
Is this valid for 4.4? thanks in advance and sorry my poor English:good:
Click to expand...
Click to collapse
Ehm, I don't know
Sent from Italy using Tapatalk

raan4 said:
Is this valid for 4.4? thanks in advance and sorry my poor English:good:
Click to expand...
Click to collapse
Yes, since some version of CM10.2 TeamJanice uses preload partition for swap. So it must be formated, if that do not work - flash stock JB.

shut_down said:
Yes, since some version of CM10.2 TeamJanice uses preload partition for swap. So it must be formated, if that do not work - flash stock JB.
Click to expand...
Click to collapse
Thanks for your attention
I have a question
Then the steps to back to stock rom would be:
1-recovery (cwm)
2-format preload
3 restore stock
?????
Thanks in advance and sorry my poor English

raan4 said:
Thanks for your attention
I have a question
Then the steps to back to stock rom would be:
1-recovery (cwm)
2-format preload
3 restore stock
?????
Thanks in advance and sorry my poor English
Click to expand...
Click to collapse
You can go back like that, or you can flash stock fb, root, install cocore and restore your backup (if you want to go back to your backup).
Послато са GT-I9070 уз помоћ Тапатока

so basically you need the CWM?
if so here you go HERE

br4infreze said:
so basically you need the CWM?
if so here you go HERE
Click to expand...
Click to collapse
No, he already have it on CM10.2. He need to repartition /preload partition.

shut_down said:
No, he already have it on CM10.2. He need to repartition /preload partition.
Click to expand...
Click to collapse
ohhhh

Help please!

I always get a unsuccessful message when flashing rom through twrp. After that, I wanna restore my stock 4.1 I backup earlier, but it went into boot loop after I restore, I had Odin back to stock for twice, reroot and things remain the same, any help?
Thanks in advance!

If i remember right in TWRP must mount your system before flash.
Powered by CM11

R_a_z_v_a_n said:
If i remember right in TWRP must mount your system before flash.
Powered by CM11
Click to expand...
Click to collapse
I'm a newbie, can you kindly link me to a related article about that? Thanks btw

quanlim said:
I'm a newbie, can you kindly link me to a related article about that? Thanks btw
Click to expand...
Click to collapse
What error message receive in TWRP after you try to flash?

R_a_z_v_a_n said:
What error message receive in TWRP after you try to flash?
Click to expand...
Click to collapse
I'm not able to boot after that, I Odin back to stock, it showed failed after trying to flash

quanlim said:
I'm not able to boot after that, I Odin back to stock, it showed failed after trying to flash
Click to expand...
Click to collapse
From what ROM you are trying to restore?

quanlim said:
... it showed failed after trying to flash
Click to expand...
Click to collapse
And the cause which led to the installation failure?
Try to use CWM recovery from CoCore Kernel and see if you can flash custom ROM's.
But make a backup in CWM of your stock ROM, because that one from TWRP don't work in CWM.

I have never had any bugs/errors with CWM, NEVET. So try to follow Razvan's comment

elementbt said:
I have never had any bugs/errors with CWM, NEVET. So try to follow Razvan's comment
Click to expand...
Click to collapse
I will try first, will report back =D

elementbt said:
I have never had any bugs/errors with CWM, NEVET. So try to follow Razvan's comment
Click to expand...
Click to collapse
Using CWM, getting a 'bad zip' message, when I try to restore, it says 'md5 mismatch'

quanlim said:
Using CWM, getting a 'bad zip' message, when I try to restore, it says 'md5 mismatch'
Click to expand...
Click to collapse
I can't really help. Try to search on forum for this error, I have read something about it time ago but can't remember where, sorry.

quanlim said:
Using CWM, getting a 'bad zip' message, when I try to restore, it says 'md5 mismatch'
Click to expand...
Click to collapse
Redownload the ROM. Zip is corrupted, or you renamed the folder zip and name contain spaces.
Try first with redownload. I'm almost sure for corrupted zip.

R_a_z_v_a_n said:
Redownload the ROM. Zip is corrupted, or you renamed the folder zip and name contain spaces.
Try first with redownload. I'm almost sure for corrupted zip.
Click to expand...
Click to collapse
Ok, and how about the unable to restore what i backed up? btw, just to double confirm, do I flash CWM by downloading Cocore, extract it, and flash the tar.md5 with universal kernel flasher?

quanlim said:
Ok, and how about the unable to restore what i backed up? btw, just to double confirm, do I flash CWM by downloading Cocore, extract it, and flash the tar.md5 with universal kernel flasher?
Click to expand...
Click to collapse
Make sure what version you flash. If your phone is I9070P you must download EP version, and for I9070 must flash E version.

R_a_z_v_a_n said:
Make sure what version you flash. If your phone is I9070P you must download EP version, and for I9070 must flash E version.
Click to expand...
Click to collapse
Re-rooted, install recovery, just not able to flash roms, still get the 'bad' message, redownloaded the rom, and tried other roms too

quanlim said:
Re-rooted, install recovery, just not able to flash roms, still get the 'bad' message, redownloaded the rom, and tried other roms too
Click to expand...
Click to collapse
Bro, what kind of phone do you have?
What recovery are you trying to install?
What ROM ?
Tell more details if you want help.

R_a_z_v_a_n said:
Bro, what kind of phone do you have?
What recovery are you trying to install?
What ROM ?
Tell more details if you want help.
Click to expand...
Click to collapse
GT-i9070, rooted with the root.zip (from recovery), flash shaan temporary cwm, from there flashed cocore kernel (CWM), and I'm stuck here, unable to flash roms, unable to restore stock rom backups

quanlim said:
GT-i9070, rooted with the root.zip (from recovery), flash shaan temporary cwm, from there flashed cocore kernel (CWM), and I'm stuck here, unable to flash roms, unable to restore stock rom backups
Click to expand...
Click to collapse
Put screenshot of your system

R_a_z_v_a_n said:
Put screenshot of your system
Click to expand...
Click to collapse
here you go

quanlim said:
here you go
Click to expand...
Click to collapse
Hmm, now you have custom recovery.
Enter in recovery, and if choose backup to sdcard1., and wit until finish that operation and receive message "backup complete".
Then, if you already have downloaded ROM and GApps, make wipe cache and dalvik and do a wipe of data/factory reset (be sure you have already backed up your apps with some backup app like Titanium Backup or other), go to install zip, choose zip from external card and proceed to flash, first ROM after that GApps.

[Q] Galaxy Ace CWM cant mount data

Hi everyone.
My galaxy Ace gts5830 can't cmw can't mounts data; i recently flash it via odin..
when i flash it; it's say it can't apply csc on recovery mod...
now i can't install any custom rom or backups cmw.. i flash it several time id didn't work...
my phone Europe so use fw "xeu" "xwkpa"

s.tanbin said:
Hi everyone.
My galaxy Ace gts5830 can't cmw can't mounts data; i recently flash it via odin..
when i flash it; it's say it can't apply csc on recovery mod...
now i can't install any custom rom or backups cmw.. i flash it several time id didn't work...
my phone Europe so use fw "xeu" "xwkpa"
Click to expand...
Click to collapse
Which CWM version did you install?

mahithm said:
Which CWM version did you install?
Click to expand...
Click to collapse
5.0.26 for cooper

s.tanbin said:
5.0.26 for cooper
Click to expand...
Click to collapse
Can you tell me exactly what happens when you flash a custom rom from CWM?

s.tanbin said:
Hi everyone.
My galaxy Ace gts5830 can't cmw can't mounts data; i recently flash it via odin..
when i flash it; it's say it can't apply csc on recovery mod...
now i can't install any custom rom or backups cmw.. i flash it several time id didn't work...
my phone Europe so use fw "xeu" "xwkpa"
Click to expand...
Click to collapse
You need root permissions to mount /data partition...
1. Reboot into <Stock recovery 3e>
2. Root your device
3. Flash CWM 5.0.2.6 Fixed
4. Done!

mahithm said:
Can you tell me exactly what happens when you flash a custom rom from CWM?
Click to expand...
Click to collapse
i try to remove same use less app and tw home.. which i did lot of time before..
but suddenly it started bootloop.
then i try to cmw back the rom cmw say miss match.
then i flast stock rom via odin
at fast it didn't take properly phone auto started before the operation finish; and started to bootloop.. i flash it again then same problem ..
then i clear data then phone on but cmw can't mound data i try flash cm10 it blink.
finally after several flash and try cm9 it took cm9 and work perfect but if i go stock rom it still having data mound problem
frameworks xwkpa

Viper The Ripper said:
You need root permissions to mount /data partition...
1. Reboot into <Stock recovery 3e>
2. Root your device
3. Flash CWM 5.0.2.6 Fixed
4. Done!
Click to expand...
Click to collapse
phone is 100% rooted
and i installs that cmw as well but cmw won't mount data.
but this problem fix after flash in cm 9

s.tanbin said:
i try to remove same use less app and tw home.. which i did lot of time before..
but suddenly it started bootloop.
then i try to cmw back the rom cmw say miss match.
then i flast stock rom via odin
at fast it didn't take properly phone auto started before the operation finish; and started to bootloop.. i flash it again then same problem ..
then i clear data then phone on but cmw can't mound data i try flash cm10 it blink.
finally after several flash and try cm9 it took cm9 and work perfect but if i go stock rom it still having data mound problem
frameworks xwkpa
Click to expand...
Click to collapse
Always after flashing a STOCK rom via Odin boot into recovery and do wipw data factory reset and wipe cache partition too in order to avoid the bootloop
Don't remove the launcher you need at least one to use your phone
Your data mount problem could be solved if you flash an Android 2.3.6 Firmware
(Try with ddq8 or ktm)

Viper The Ripper said:
Always after flashing a STOCK rom via Odin boot into recovery and do wipw data factory reset and wipe cache partition too in order to avoid the bootloop
Don't remove the launcher you need at least one to use your phone
Your data mount problem could be solved if you flash an Android 2.3.6 Firmware
(Try with ddq8 or ktm)
Click to expand...
Click to collapse
thanks for the tip..
r u sure is it ok if i flash 2.3.6 firmware coz Samsung didn't officialy give any update for my original firmware...
don't mind just scare... so asking..

s.tanbin said:
thanks for the tip..
r u sure is it ok if i flash 2.3.6 firmware coz Samsung didn't officialy give any update for my original firmware...
don't mind just scare... so asking..
Click to expand...
Click to collapse
It will be ok

mahithm said:
It will be ok
Click to expand...
Click to collapse
ok i will give a try...

s.tanbin said:
thanks for the tip..
r u sure is it ok if i flash 2.3.6 firmware coz Samsung didn't officialy give any update for my original firmware...
don't mind just scare... so asking..
Click to expand...
Click to collapse
Yeah, it should work. If you have the correct model (GT-S5830) you could use all the Firwares available for it
---------- Post added at 01:22 PM ---------- Previous post was at 01:16 PM ----------
s.tanbin said:
ok i will give a try...
Click to expand...
Click to collapse
Ok! anyway you can go back to your current firmware when you want
BTW some customs roms are based in european or indian firmwares

[Q] need urgent help! bricked it

hey eveyone!
my device is galaxy s advance gt-i9070 on which i was using cutom rom aicp 3.5 nightly (4.4.2 kitkat) with minor bugs and cwm recovery 6.0.4.7
i decided to switch to paranoid android 3.69 for smoother perfomance but sadly i bricked my device. although i had backed up my rom using cwm recovery on sd card. but the most sad part is that even recovery is not working. it just reboots again and again. someone told me to flash stock firmware via odin as the download mode is working. but i am worried that my data will be lost. can anyone tell me my data will be lost or not????
and if it ll lost than any way to save it or recover it/ ? i had extremely precious data in it. but being careless i didnt backed my personal data in my laptop.. please help me guys.. ready to pay any cost for my data

shivamgaba22 said:
hey eveyone!
my device is galaxy s advance gt-i9070 on which i was using cutom rom aicp 3.5 nightly (4.4.2 kitkat) with minor bugs and cwm recovery 6.0.4.7
i decided to switch to paranoid android 3.69 for smoother perfomance but sadly i bricked my device. although i had backed up my rom using cwm recovery on sd card. but the most sad part is that even recovery is not working. it just reboots again and again. someone told me to flash stock firmware via odin as the download mode is working. but i am worried that my data will be lost. can anyone tell me my data will be lost or not????
and if it ll lost than any way to save it or recover it/ ? i had extremely precious data in it. but being careless i didnt backed my personal data in my laptop.. please help me guys.. ready to pay any cost for my data
Click to expand...
Click to collapse
Flashing stock firmware with Odin will not delete your data from SD card. You will probably need to do factory reset, it will delete your contacts, sms, apps... But stuff from internal and external sd will remain there.
You bricked it because 4.4.2 uses preload partition for a swap, and it is partitioned in different way. And on PA 3.69 is probably different.
Or ROM zip of PA was corrupted.

thankyou and one more question
shut_down said:
Flashing stock firmware with Odin will not delete your data from SD card. You will probably need to do factory reset, it will delete your contacts, sms, apps... But stuff from internal and external sd will remain there.
You bricked it because 4.4.2 uses preload partition for a swap, and it is partitioned in different way. And on PA 3.69 is probably different.
Or ROM zip of PA was corrupted.
Click to expand...
Click to collapse
thanx a lot buddy now i can flash it being tension free. but can you tell me the way to flash PA without bricking /????

shivamgaba22 said:
thanx a lot buddy now i can flash it being tension free. but can you tell me the way to flash PA without bricking /????
Click to expand...
Click to collapse
I did not use that version that you used. I think that you will not have a problem when you install it over stock, I explained you why you had problem when you did it over CM11.
Sent from my GT-I9070 using Tapatalk

Thanx a lot
Everything fine now with all data restored..
Once again thnx buddy
Sent from my GT-I9070 using XDA Premium 4 mobile app

Hi
I 've bricked my phone as i was trying to clear cache 'n partition of my rooted phone. I assume it must have cleared the software as well.
i'm trying to flash it via odin but it is showin FAIL. i'm putting a pda .md5 file from sammobile 'n it's still not working. pl help.

Neo2803 said:
Hi
I 've bricked my phone as i was trying to clear cache 'n partition of my rooted phone. I assume it must have cleared the software as well.
i'm trying to flash it via odin but it is showin FAIL. i'm putting a pda .md5 file from sammobile 'n it's still not working. pl help.
Click to expand...
Click to collapse
You can't brick phone with clearing cache. Did you wipe system partition? Try to install same ROM that you had (if you had).
Give us a screenshot of Odin fail. What exactly happen. And what is the full name of md5 that you put in pda of Odin. Try different version of Odin too.

shut_down said:
You can't brick phone with clearing cache. Did you wipe system partition? Try to install same ROM that you had (if you had).
Give us a screenshot of Odin fail. What exactly happen. And what is the full name of md5 that you put in pda of Odin. Try different version of Odin too.
Click to expand...
Click to collapse
Yes, i did wipe system partition. Should i have not done that ???????/
Name of md5 - I9070DDULP8_I9070ODDULP8_HOME.tar.md5 .. Can you suggest another one ?
I did have a ROM named light JB which i found here only. Its location showthread.php?t=2244441.
pl guide future course of action.
TIA.

Neo2803 said:
Yes, i did wipe system partition. Should i have not done that ???????/
Name of md5 - I9070DDULP8_I9070ODDULP8_HOME.tar.md5 .. Can you suggest another one ?
I did have a ROM named light JB which i found here only. Its location showthread.php?t=2244441.
pl guide future course of action.
TIA.
Click to expand...
Click to collapse
Go back to recovery, and if you have ROMs zip install it again.
Ofcourse you shouldn't wipe system partition, system files are there...
And if you can't install ROM again, what error do you get in Odin?

shut_down said:
Go back to recovery, and if you have ROMs zip install it again.
Ofcourse you shouldn't wipe system partition, system files are there...
And if you can't install ROM again, what error do you get in Odin?
Click to expand...
Click to collapse
I didn't think twice before wiping it. My bad.
Anyways, That's the issue. I can't go to recovery. Phone only shows the odin mode (if i press VOL. DOWN+HOME+POWER).
Odin simply says FAILS.

Neo2803 said:
I didn't think twice before wiping it. My bad.
Anyways, That's the issue. I can't go to recovery. Phone only shows the odin mode (if i press VOL. DOWN+HOME+POWER).
Odin simply says FAILS.
Click to expand...
Click to collapse
Well then you did not just wipe system, you installed some GB based ROM over?
You have log window in Odin, where it fails? Try to redownlaod firmware again, and then install again.
What version of Odin do you use? Try 3.x.

shut_down said:
Well then you did not just wipe system, you installed some GB based ROM over?
You have log window in Odin, where it fails? Try to redownlaod firmware again, and then install again.
What version of Odin do you use? Try 3.x.
Click to expand...
Click to collapse
Odin Version - 3.07
I'm not sure it s GB based ROM and neither if it's JB. Can you take some more pain 'n send me a proper link ? please.
My older custom ROM is http://forum.xda-developers.com/showthread.php?t=2244441 - http://d-h.st/vge

Neo2803 said:
Odin Version - 3.07
I'm not sure it s GB based ROM and neither if it's JB. Can you take some more pain 'n send me a proper link ? please.
Click to expand...
Click to collapse
But it should be the same:
http://terafile.co/222154239129/INU-I9070DDULP8-20130412134604.zip
http://rapidgator.net/file/0a25225062db04ba2c8216cca12972d2
Check the file zize of zip when you download it, it should be 425MB.

shut_down said:
But it should be the same:
http://terafile.co/222154239129/INU-I9070DDULP8-20130412134604.zip
http://rapidgator.net/file/0a25225062db04ba2c8216cca12972d2
Check the file zize of zip when you download it, it should be 425MB.
Click to expand...
Click to collapse
Lemme download this firmware. but what about the custom ROM I installed last time. Shouldn't THAT be the one i install NOW ???
pasting the link here for your review -
http://forum.xda-developers.com/showthread.php?t=2244441
http://d-h.st/vge

Neo2803 said:
Lemme download this firmware. but what about the custom ROM I installed last time. Shouldn't THAT be the one i install NOW ???
pasting the link here for your review -
http://forum.xda-developers.com/showthread.php?t=2244441
http://d-h.st/vge
Click to expand...
Click to collapse
ROM is fine. And you was on GB or JB before? If you was on GB then this problem you got is normal. You must be on JB (flash JB firmware) if you install JB ROM.
And again, if you get FAIL on Odin DO A SCREENSHOT AND POST IT HERE. To see what cause that fail. Left part of this screenshot is a log http://4.bp.blogspot.com/-gkWcapOu2...gingerbread+s5570jpq8+samsung+galaxy+Mini.jpg
Blue, where it says Message.
This is for other phone, do not pay attention on that, I just told you what I need to see.
---------- Post added at 11:28 AM ---------- Previous post was at 11:02 AM ----------
Neo2803 said:
Lemme download this firmware. but what about the custom ROM I installed last time. Shouldn't THAT be the one i install NOW ???
pasting the link here for your review -
http://forum.xda-developers.com/showthread.php?t=2244441
http://d-h.st/vge
Click to expand...
Click to collapse
And no, you must install Firmware not, not ROM. Because you probably installed JB ROM over GB. That is why you do not have working recovery.

Finally unbricked !!!
shut_down said:
ROM is fine. And you was on GB or JB before? If you was on GB then this problem you got is normal. You must be on JB (flash JB firmware) if you install JB ROM.
[/COLOR]
And no, you must install Firmware not, not ROM. Because you probably installed JB ROM over GB. That is why you do not have working recovery.
Click to expand...
Click to collapse
Finallyyyyyyy !!! yipppieee !!! I'm able to flash my phone with a JB Firmware. I shall be more careful in future.
http://i.imgur.com/UMv2kgs.png
http://i.imgur.com/WPP6yqs.png?1
Thanks a tonnnnn shut_down :good:: God bless you.