Related
Hi...I've been reading through everything regarding Google vs. Cyanogen dispute. IMHO I feel very sad about it but....what can we do?? I like CM ROMS they are probably the best (I'm not saying JF, HAYKURO, etc, are bad, just that I prefer CM) but since all the C&D issue Gmail, Gtalk, Market, don't work..Well
Well the thing is, I've read some comments that on CM Versions up to 4.0.4 everything still works fine...it just gets messy from 4.1.x and up, is this true??
cause I still have 4.0.4 in my computer and I really want to flash it to this version...so please let me know..
Thanks!
We are all done talking about the C&D. There are plenty of threads about it. Download CyanogenMod Petition off the market to show support.
As for his ROMs 4.04 is stable. Nice ROM with lots of themes for it. 4.1.11.1 was days away from being stable. It is pretty stable. The only problems I have noted is some apps arnt supported with 1.6 firmware base. And sometimes my icons just disapear from my home screen but, after reboot its fine for another 24 hrs.
2 things really
1. you have a valuable pm
2. ummm 4.1.11.1 hasn't given me any problems except once out of a week or so i have been using it, i got the coma issue and had to reboot. also anything you have on your computer is well.... on your computer, is google going to stop every one they see with a g1 and go to settings- about phone and see if there a cyanogen mod version number there.
I think I didn't make my self very clear, when I ask if it is giving any problems I refer to the Market, Gmail, Gtalk still workin with CM version 4.0.4...that is the real question
i use gtalk all the time in 4.1.11.1. the market works just fine for me. gmail registers my emails on my phone faster then it does on my computer. i don't use maps to often (unless i go out of state, i know where i am going), so i haven't had a need to use it in 4.1.11.1, but it still should work.
I literally mean the only i have had with 4.1.11.1 is that one instance of the coma occurring. i have had no problems with anything else that is rom specifically related, the only thing that isn't the roms fault is that some of the apps are not 1.6 compatible, but again, not the fault of the rom.
I Understand
I get what you are saying. Google has no way of detecting that you are using an "unauthorized" ROM. Flash away. Except for the "coma" issue (was wondering what that was called), 4.1.11.1 is pretty nice. I prefer 4.0.2 over 4.0.4 for the stable but that's just me. Anyway, why not wait. Cyan has a surprise for everyone this weekend.
Hello, I know this is XDA and not the cyanogen forums, but I've been there and done that, and no one's really given me a solution that works (both on the forums, irc chat, the developer of the irc client I use, etc), so I'm at the end of my wits and I'm going to try here since the community here might know what to do. Cyanogen RC3 has been giving me problems with Andchat lately, ones I never got with Cyanogen. Andchat lags whenever I scroll up or down. I have also recently noticed that Android IRC suffers from the same problems. The problem can be solved by switching servers, but comes back instantly the second someone posts a message. I have tried reflashing and wiping, contacting the developer, etc. Nothing has worked, does anyone have a solution that works? One other thing, apon contacting the developer, I was told the only people who'd been reporting the problem where those running custom ROM's. Does anyone know how to fix this?
hey folks,
I have been following all the Milestone development threads since the very beginning, and have gone through each inkarnation of kabaldans incredible work since CM6. Recently, I updated to CM10 (first without, now with 2nd boot) and am absolutely amazed by how far our good old milestone has come. While playing around with it quite a bit, I have come across some problems (I would love to report them in the appropriate development thread, but the 10-post-count won't let me unfortunately.)
First, I really loved the keyboard multipress-system since I live in Germany and have to enter Umlauts very frequently (ä, ö, ü, etc.). The multipress-system sped that up greatly. Now, although the corresponding settings are there in the Milestone-specific part of the Settings-app, multipressing actually doesn't work for me in CM10. Is that problem specific to me, or is multipress not yet fully integrated in CM10?
The second thing I noticed (probably since 2nd boot, but I am not entirely sure) is, that in the Settings under About Phone > Status neither IME nor Serial number are displayed (instead, it says "unknown"). This also prevents me from launching Whats App - it quits saying "Your phone could not be identified ....".
Does anyone else experience those issues - and/or could perhaps somebody please post this into the CM10 development thread, so kabaldan notices?
thanks, mvol
mvol said:
hey folks,
I have been following all the Milestone development threads since the very beginning, and have gone through each inkarnation of kabaldans incredible work since CM6. Recently, I updated to CM10 (first without, now with 2nd boot) and am absolutely amazed by how far our good old milestone has come. While playing around with it quite a bit, I have come across some problems (I would love to report them in the appropriate development thread, but the 10-post-count won't let me unfortunately.)
First, I really loved the keyboard multipress-system since I live in Germany and have to enter Umlauts very frequently (ä, ö, ü, etc.). The multipress-system sped that up greatly. Now, although the corresponding settings are there in the Milestone-specific part of the Settings-app, multipressing actually doesn't work for me in CM10. Is that problem specific to me, or is multipress not yet fully integrated in CM10?
The second thing I noticed (probably since 2nd boot, but I am not entirely sure) is, that in the Settings under About Phone > Status neither IME nor Serial number are displayed (instead, it says "unknown"). This also prevents me from launching Whats App - it quits saying "Your phone could not be identified ....".
Does anyone else experience those issues - and/or could perhaps somebody please post this into the CM10 development thread, so kabaldan notices?
thanks, mvol
Click to expand...
Click to collapse
I have issue like this, and I can see IMEI and IMEI SV, but the Serial Number is "unknown".
after doing a full wipe, IMEI now shows up for me as well, but unknown serial and multipress problems remain.
mvol said:
hey folks,
(I would love to report them in the appropriate development thread, but the 10-post-count won't let me unfortunately.)
Click to expand...
Click to collapse
You are almost at the 10th post.
Maybe wiping everything is a solution for that?
mvol said:
hey folks,
I have been following all the Milestone development threads since the very beginning, and have gone through each inkarnation of kabaldans incredible work since CM6. Recently, I updated to CM10 (first without, now with 2nd boot) and am absolutely amazed by how far our good old milestone has come. While playing around with it quite a bit, I have come across some problems (I would love to report them in the appropriate development thread, but the 10-post-count won't let me unfortunately.)
First, I really loved the keyboard multipress-system since I live in Germany and have to enter Umlauts very frequently (ä, ö, ü, etc.). The multipress-system sped that up greatly. Now, although the corresponding settings are there in the Milestone-specific part of the Settings-app, multipressing actually doesn't work for me in CM10. Is that problem specific to me, or is multipress not yet fully integrated in CM10?
The second thing I noticed (probably since 2nd boot, but I am not entirely sure) is, that in the Settings under About Phone > Status neither IME nor Serial number are displayed (instead, it says "unknown"). This also prevents me from launching Whats App - it quits saying "Your phone could not be identified ....".
Does anyone else experience those issues - and/or could perhaps somebody please post this into the CM10 development thread, so kabaldan notices?
thanks, mvol
Click to expand...
Click to collapse
Hi mvol,
I am running the new CN10 10/24, the seril reports also Unkown but it doesnt stop me from running and using WhatsApp app.
regards
EP
WhatsApp now works - it looks like the full wipe which solved the unknown IMEI problem also fixed WhatsApp.
mvol said:
WhatsApp now works - it looks like the full wipe which solved the unknown IMEI problem also fixed WhatsApp.
Click to expand...
Click to collapse
Realy ? I will have a try !
I also went through this and really soh after giving a factory reset was decided that in fact
have you guys tried multipress using the hardware keyboard? Does it work for you?
mvol said:
have you guys tried multipress using the hardware keyboard? Does it work for you?
Click to expand...
Click to collapse
here using the shift and alt is working normally above 2 keys simultaneous ... not tested on that specifically, you will use more than 2 simultaneous keys?
with "multipress" I mean the feature invented by nadlabak/kabaldan that allows one to press the same key multiple times very quickly to enter special characters (like pressing "a" two times very fast producing "ä", for example.) It worked perfectly for me in CM7, but it doesn't anymore in CM10...
anyone, please?
It works fine for me. I use it frequently.
mvol: I still haven't found the time to implement the multipress feature completely in CM10. Only a few of the final bits is missing. Please be patient.
thanks for your answer - in that case, I'll wait patiently
Link not working for me
Hi All,
Im unable to access the latest builds for milestone CM10 by kabaldan. Please can anybody provide alternate link?
Thanks
Hello people!
I'm a long time CM ( 6 and 7 ) user on my Milestone.
After updating it to CM10 ( full wipe, ext3 partition formatted ), adb does not find my device anymore.
I have changed the USB settings and enabled the debugger in development, but nothing changes. Even after a restart.
Running on Ubuntu 12.10.
Any ideas?
Thanks!
The issue I have is quite annoying, if I can use such a word in a development stage . After each restart, the network is being forgotten, so I have to switch to the airplane mod off and on.
@pt0: This is a known issue, if I can say that. I experience this too, though not after every restart. I think it's a problem we can live with.
Hello.
I recently dusted off my Australian Velocity after the Nexus 5 went for a swim at the beach. I have S-off, rooted and installed the albinoman ROM.
There are a couple of issues I have noticed so far.
The 4g connection is patchy at best. Not very stable at all but I can live with that.
The battery indicator is acting strangely it stays in 100% for ages but then it starts going down very quickly until it gets to 14% where it stays for a long time but once it gets past that it just goes to full discharge very fast.
I am having the same issue that many other guys and my MMS capabilities are not working. The phone just stays sending or retrying but messages never leave.
Any suggestions about what to do? I have wiped and reinstalled the ROM a few times and it makes no difference.
On the other hand I love the overclocking capabilities makes the phone feel a bit more responsive.
Thanks and keep up the good work
munecito said:
Hello.
I recently dusted off my Australian Velocity after the Nexus 5 went for a swim at the beach. I have S-off, rooted and installed the albinoman ROM.
There are a couple of issues I have noticed so far.
The 4g connection is patchy at best. Not very stable at all but I can live with that.
The battery indicator is acting strangely it stays in 100% for ages but then it starts going down very quickly until it gets to 14% where it stays for a long time but once it gets past that it just goes to full discharge very fast.
I am having the same issue that many other guys and my MMS capabilities are not working. The phone just stays sending or retrying but messages never leave.
Any suggestions about what to do? I have wiped and reinstalled the ROM a few times and it makes no difference.
On the other hand I love the overclocking capabilities makes the phone feel a bit more responsive.
Thanks and keep up the good work
Click to expand...
Click to collapse
As for the 4G connection, once you've accumulated 10 posts you should mention this in the CM 11 ROM thread and ask if the APN needs to be any different than normal (or if the mod changes the APN). The battery issue should get fixed if you let it fully charge and fully discharge about 3 times. The MMS capabilities is a known issue; try the specific nightlies that albinoman recommended to fix the MMS issue. New nightlies might break previous fixes and stuff.
Same Issue
I'm having the same issue here for AT&T HTC Vivid, none of my MMS were sent, nor have I received any. It's really essential for me cuz of my group, clubs have MMS and inorder for me to get those notifications I need MMS.
Calls are okay, but there are times where there's no sound on the other caller, so to fix that I end call and call again, which fixes it.
One final issue I've been having since Jellybean and Kitkat is the proximity for when calls, it does not respond. So i have to turn on Settings>Accessibility>Power button to end a call, because the phone's screen stays black during call, and 10-30 seconds after call. Camera is okay too, but doesn;t function well in video recording in apps like Snapchat and Instagram.
Overall, it's a great ROM by albinoman, I wish the Sweep2Wake is soon embedded, that's really great and wayyy better than the power button.
projectisaac said:
As for the 4G connection, once you've accumulated 10 posts you should mention this in the CM 11 ROM thread and ask if the APN needs to be any different than normal (or if the mod changes the APN). The battery issue should get fixed if you let it fully charge and fully discharge about 3 times. The MMS capabilities is a known issue; try the specific nightlies that albinoman recommended to fix the MMS issue. New nightlies might break previous fixes and stuff.
Click to expand...
Click to collapse
Thank you very much.
I tried Albinoman suggested rom and I still have issues with MMS.
The battery indicator is normalising as you said it would.
I know about the 10 posts count but it is hard for me to just write a post for the sake of getting the count up.
Yeah, I hear ya, I've been there before too. The posts will generally come easily and quickly posting to q&a and general, so you're on the right track
Sent from my Vivid 4G using xda app-developers app
Similar question
I'm also in Aus.
Been running CM versions now for over a year.
The new CM11 has been trouble free, with one quirky problem. I manually set my network preference to 2G at one desperate battery extending moment.
Now i can't find how to select "4G"??? When i use the preferred network type i only have 2 or 3G as options.
When i search for available networks i get an "error"
Cheers
Mike
Mikeyr1000 said:
I'm also in Aus.
Been running CM versions now for over a year.
The new CM11 has been trouble free, with one quirky problem. I manually set my network preference to 2G at one desperate battery extending moment.
Now i can't find how to select "4G"??? When i use the preferred network type i only have 2 or 3G as options.
When i search for available networks i get an "error"
Cheers
Mike
Click to expand...
Click to collapse
Well, I just did what you did, and rebooting does not fix it, nor does clearing the data of various apps installed. I'll post this to the CM11 thread and see if any answers or ideas are brought to light.
ngelTV should
projectisaac said:
Well, I just did what you did, and rebooting does not fix it, nor does clearing the data of various apps installed. I'll post this to the CM11 thread and see if any answers or ideas are brought to light.
Click to expand...
Click to collapse
Many thanks, i saw the post!
Yeah I tried clearing everything. Did a manual reinstall of the APNs using a number of different configs.
Did the wipes ....... did a little dance .... pulled the battery and sim ...... sacrificed a small packet of tofu (no goats, i like goats) The gods of mobility have still not smiled my way.
Wont find networks when i do a search yet am nicely connected, can make calls etc etc.
thanks for trying. If i get no joy will reflash a nightlie and see if it resets?!
Yeah, although wiping the caches didn't do the trick, reflashing a nightly (along with wiping data, cache, and dalvik-cache) should take care of the problem. If you are really attached to your app settings, look into titanium backup for backing up your apps along with their data; it's also the way I save my WiFi passwords.
Sent from my Vivid 4G using xda app-developers app
OK...
If you don't like my dialer solution... I have found 2 xposed mods that do what you want...
Intelli3G... And GravityBox...
They both hook the dialer to force network changes...
Sent from my Vivid 4G using Tapatalk
rignfool said:
OK...
If you don't like my dialer solution... I have found 2 xposed mods that do what you want...
Intelli3G... And GravityBox...
They both hook the dialer to force network changes...
Sent from my Vivid 4G using Tapatalk
Click to expand...
Click to collapse
Hi, tried the dialer solution and no joy.
Installed INtelli3G but it needs the xposed framework which simply won't install. Have tweaked instal options appropriately so it should???
Mike
EDIT My bad, didn't like installing from bluetooth transfer, downloaded on phone worked .... will test I3G
Fixed
Many thanks rignfool
I installed xposed and Intelli3g and with a bit of mucking around now have 4g back!
Seems to work, have 4g 4 bars!
My initial attempts to force lte caused me to have no coverage (I was at work in North SYd so good LTE normally).
Using the "use all" option in Intelli3g, a reboot and swapping around towers was the trick for me.
Thanks again
Mike
Awesome! Do you want to make a step by step instruction set on how to fix that? I would like to know, and I'm sure a newbie who runs into the save problem would really appreciate it.
Sent from my Vivid 4G using xda app-developers app
Im on the newest nightly build of CM11, On ATT. MMS not working and I have no clue on how to get it to work. Anyone wanna help?
VividTheMan said:
Im on the newest nightly build of CM11, On ATT. MMS not working and I have no clue on how to get it to work. Anyone wanna help?
Click to expand...
Click to collapse
Known issue, you just have to be patient until it gets fixed (no one has gotten it to work)
Hi guys!
So I've been a lurker on here for forever (since my Touch Pro actually...whoa), but haven't participated much before now. Either way, I don't think I'm too much of a noob. However, today I took the plunge and rooted my One. I haven't messed around with this stuff since my Evo 4G so I tried to follow directions and do everything right. I then went to install a custom ROM (really a series of ROMs because of this mess), and everything seems to work well enough. However, when I got to set up my phone, the setup process hung on "Activate mobile data service" before telling me it couldn't connect. I figured it was just an error with the nightly I was using so I switched to another ROM and the same thing happened.
In this order, I've tried
Pac ROM
Liquid
Beanstalk
CM11
and have had the same issue every time. Clean flash and everything. I figured maybe it was an issue with CM based ROMs, but twrp fails every time I try to install AOKP and I haven't seen a real, current fix for this issue (tried changing APN), nor many people talking about any problems over the past few months.
Anybody that can help, I GREATLY appreciate it! I seriously don't know where to look now. I feel like I've searched everywhere but no luck.
EDIT: Additionally, I just tried to flash SlimKat. When it got to the "Activate mobile data service" it dialed a number which replied with "The feature code you have entered is not valid" .....WHAT?
I'm having a similar issue on my G2. I wasn't flashing ROMs, but was using an Xposed module. Wifi works, but mobile data does not. I just made a thread about this myself.