[Q] Factory Mode ( ParseService ) running in background - Galaxy S III Mini Q&A, Help & Troubleshooting

Why is Factory Mode running in my background?? What is it by the way?? When I clicked it, it showed ParseService. .What is ParseService?? Does it drain your phone's battery?? Tried Googling, no results. .

Same question

I just noticed that changing SIM cards would get that service on

It is the service that parses the secret codes which open various secret menus of the phone. If you don't need them, you may remove or freeze it.

as i understand all galaxy devices have FactoryMode proccess.
metalboy94
I have stopped this service and enter secret code with successful that mean for secret code doesnt need this service
question still actual.
who know what this service does?

It's what detects the secret codes in your phone dialer for codes like #*#*#4636*#*#. Turn that service off and those codes will no longer be detected or function from the dialer.

Related

[Q]HTC Toush diamond2 Locked

Hi guys
I have installed the free antitheft mobile software of F secure at my windows mobile phone {HTC Touch Diamond2] and, of course, I have chosen the number key for entering the software and my mobile and the sec ret code [letters and numbers] to lock it from distance.
Since then, many times when I was restarting my phone I didn’t had any problem to unlock the software using the number code, and then, with the same number code, to unlock my phone so that I can use it.
Unfortunately, yesterday after that I installed another software [swype] and I had to restart my phone, when I entered the same number code I received the answer that the code was incorrect. I tried many times without result –some time I got the message to use my secret code [letters and numbers] which lock remotely my phone but this is not possible because to enter the F secure software I can use only numbers. Finally now, any effort to enter the number code is without result and I don’t get even the message that my code is not the correct one.
I was informed that the only solution is to hard reset my phone-solution that I would like to avoid for not losing my sms, contacts, softwares installed etc. So I would be very grateful if you could help me
Thanx in advance

enter network control key?

hey guys
i just got my phone, and it was fine but had no service, so i flashed a compatible modem, and now i get enter unlock network control key
is there anyway to fix this or did i break it?
Can you operate the phone without the SIM ?? or without inputting the code ??
If so put this into the dialer *#7465625# and all options should be off.
let me know what it says. you can remove network locks pretty easy, theres an app in the market, and even a whole thread about it somewhere on here..
Enter Network Lock Key Galaxy I900T
I have a Samsung GT-I900T and is unlocked but is requesting me "Enter Network Lock Key".
I already enter again the unlock code and is incorrect. Any Help?
Thanks!
I have typed in the code *#7465625# and the network lock is on. Can this be changed?
Sorry, I think nobody know how to answer your question.
"Network Lock Control Key"
jasontran2010 said:
Sorry, I think nobody know how to answer your question.
"Network Lock Control Key"
Click to expand...
Click to collapse
Did you honestly just assume no one can help him because no one has helped him yet? Don't be ridiculous. That's absurd.
I am curious about if there is a solution to this ... i haven't run into this problem ... but imagine it might pop up.
Am planning to unlock my phone according to: http://forum.xda-developers.com/showpost.php?p=17148825&postcount=334
My phone GT-5660M (Galaxy Gio, Canada)
azzledazzle said:
Can you operate the phone without the SIM ?? or without inputting the code ??
If so put this into the dialer *#7465625# and all options should be off.
let me know what it says. you can remove network locks pretty easy, theres an app in the market, and even a whole thread about it somewhere on here..
Click to expand...
Click to collapse
I found a phone and flashed the firmware, and it says enter the network code also.
So i entered the dialer code you said and the lock code is on.
So what cind of app is there, ore other way to fix the problem

[Q] I can't unlock my phone!

Hi guys. I have a problem a bit similar to the ones I read earlier but my problem is that I entered my PIN code and phone didn't recognize it. Now I should have an option to enter PUK code and everything would be fine, but I don't have that option. My screen says: "Take a look at the manual or contact with your service provider" (something like this, my phone language is Polish so I may translate something not correctly). I did take a look at the manual but there was nothing that could solve my problem so I'm asking you, members of xda community, is there any way to solve this problem without taking phone to my GSM provider?
If you are using custom rom try full wipe maybe it would hep
Sent from my X8 using XDA App
It didn't work, but it turn my phone language into english so I can write what it says:
"SIM card is PUK-locked."
"Please see the User Guide or contact Customer Care."
If you inputted a incorrect PIN for too many times the SIM card will lock up and require the PUK to reset the PIN failure counter - that much the phone is actually doing right.
If you don't have a possibility to enter the PUK then all you can do is to see a service point of your mobile operator to have the SIM card resetted.
There's pretty much nothing you can do as that's a security function of the GSM card and not the phone or the OS.
EDIT: Any chance entering **05*<PUK Code>*# or **05*<PUK Code>*<New PIN>*<New PIN confirm># works? (in case you can get to the dialer)
I can get to the dialer, but I didn't know that I can enter PUK there, I'll give it a try and write either it worked or not.
EDIT:
B.Jay said:
Any chance entering **05*<PUK Code>*# or **05*<PUK Code>*<New PIN>*<New PIN confirm># works? (in case you can get to the dialer)
Click to expand...
Click to collapse
The second method worked! Thanks! When I use this first method it says that is either connection problem or MMI code is invalid.

[Q] Problem with Diagnosis Codes

Hi, I need some help because I cannot get access to the Samsung S i937 Focus Audio Control Utility, with the diagnosis code. I have followed the instructions here http://forum.xda-developers.com/wiki/Samsung_Focus but when I type *#0002*28345#, I don't get any menu. I have tried other code like battery etc and it works. But nothing happens when I type the code above. I am still on 7.5 and the Diagnosis code says ver.0412. I would really be grateful for any help, because I really cannot hear when people call me.

s3 mini - FDN mode activated - issue everytime on making calls

Hi,
I am facing an issue with my Samsung galaxy s3 mini ( Model - GT-I8190) with Fixed Dialing Number Mode (FDN Mode). Whenever I try to call any number even the emergency number I get a pop up saying "FDN Mode activated" . I have already tried Google all the solutions online and tried almost everything.
I have tried to disable the setting of Fixed Dial Number but when I enter the PIN and press OK , I get an error something like "SIM ERROR" popped up on the screen and the issue remains the same. I have lasso tried hard reset the phone and format it. The issue remains the same with other SIM cards , I have tried 5 different SIM card which are working fine in other mobiles.
I have also given it to a repair shop and got the phone formatted and put the fresh operating system again but still the problem is the same.
Can anyone please help me with any solution ? Let me know if you guys need any more information about the phone firmware or anything .
Regards
Shobhit
Need assistant
I have locked myself out of all my phone apps and cannot make phone calls messages etc.
Please need assistant

Categories

Resources